Due to personal reasons, I have not posted in a long time. But now I’m back with a vengeance! And on this extra day in the leap year! This day will not come again for 4 years, and what better way to celebrate than to list the TF items I bought this February. As I look back on the month, I realize I bought a lot of TFs. So here we go.

Clockwise from top left:
• Star Wars Crossover Darth Vader, TRU, $19.99
• Star Wars Crossover Darth Maul, TRU, $9.99
• DOTM Basic Human Alliance Thunderhead, Walmart, $5
• TF Prime RID Cliffjumper, TRU, $14.99
• TF Prime RID Bumblebee, TRU, $14.99 *Later returned to TRU
• DOTM Basic Human Alliance Backfire, Walmart, $5

Clockwise from top left:
• Heavy Labor, BBTS, $97.99
• Dr. Crank, BBTS, $99.99
• Neckbreaker, BBTS, $99.99
• Battle Tanker, BBTS, $102.99
• Structor, BBTS, $99.99
• Madblender, BBTS, $99.99

• TF Prime Series 02 legion Vehicon, Target, $4.99

• DOTM Basic Human Alliance Icepick, dd’s Discounts, $6.99

• TF Prime FE Voyager Optimus Prime, eBay, $57.98 shipped
• TF Prime RID Voyager Optimus Prime, Walmart, $19.96

• TF Animated Skywarp, Amazon, $13.95

• TF Prime RID Voyager Megatron, Walmart, $19.968
• DOTM Deluxe Optimus Prime with MechTech Trailer, Walmart, $29.96

Not counting the Bumblebee that was returned, that’s 18 TFs for the month. This is a total contrast from Januray, where I only bought 1 TF (PCC Heavytread). Still, 18 is a lot, even for me. Moreover, most of these were bought at MSRP. The only ones bought at discount were the 3 DOTM Basic HA figs, Skywarp, and one of the Star Wars figs (it was buy one get one half off). But screw it! I’m Hsunami Prime and approving TF spending is my job. Or maybe I should say that’s my function. TF Buyer. I like to see that on my business card. Or Tech Spec. If I owned my own business, I’m gonna make my business card look like Tech Specs.

As far as opening these guys, I opened all of them except Thunderhead, Cliffjumper, FE Optimus Prime, RID Megatron, and DOTM deluxe Optimus Prime with Trailer. I intend to open the rest of them soon.

I’m Hsunami Prime, and I’m back and better than ever. Transform and Roll Out!

Earlier this month I decided to make an order with Hasbrotoyshop.com. Seibertron will usually post when new figures are available for purchase. They made the announcement that Jazz and Tracks are out and HTS had them. I had a feeling I was not going to find them before Christmas in the stores. And being the G1 guy that I am, I had to have them during the Holidays, so I made the order.

Usually I prefer to hunt for figures in the stores. I find it fun to hunt for them, I like to save on shipping, and I can usually find it cheaper than what HTS wants, which is MSRP. But like I said, I must have Jazz and Tracks now, so I made an exception. Plus HTS was doing free shipping for orders over $50. In this order I got Jazz, Tracks, Dirge, Skullgrin, and Cybertronian Cliffjumper. Dirge was $12.99, while the rest of them was $11.99 each.

HTS divided this order into 2 separate shipments. Dirge, Skullgrin, and Cliffjumper came first. I guess those were in stock and ready to ship. Actually, I found these 3 when I found Thunderwing at Target, each for less at $9.04. So in some ways I was kicking myself for the HTS order. But I just kept reminding myself that I did it for Jazz and Tracks and it’ll be worth it. These 2 finally arrived yesterday and I now have them all in hand!

I opened Dirge before Jazz and Tracks arrived, so he’s all by his lonesome.

HTS used boxes not at all appropriate for what they were shipping. The backing was Jazz and Tracks was bent when they arrived. They were stuffed into a box not long enough for the backing.

On the other hand, the box used for the other 3 was way too big. Again, I already opened Dirge when I took this pic, but just imagine him in the box below and there’s still way too much space. Length and width of the box is about right for 3 deluxe figs, but the box is way too deep.

I guess I should be grateful that the shipping was free. Shipping for something this large would not be fun to pay for.

There’s certainly enough TFs here to make for a fun Cybertronian Christmas. I still haven’t opened the Power Core Combiners that I got from Thanksgiving, so I still got those to mess with. I’ll be doing reviews of some of these, so stay tuned. Have a safe and happy holiday my fellow TransFans. Transform and Roll Out!

Transformers have come a long way since the 80s. Back in the glorious days of G1, instructions were never necessary. I usually read them anyway, not because I can’t figure them out, but to make sure I didn’t miss anything. In G1 you could always tell how a figure transforms by looking at pics of all the modes (the six-changers may be the lone exceptions, but I never seen the toys so can’t comment).

As TransFans matured, so has the toys. Certain toy lines in the TF Universe, such as Masterpiece, Binaltech/Alternator, and Revenge of the Fallen, are meant to be difficult, and will test your Transformer IQ to its limits. Some have suggested that an engineering degree is required to transform them. These are the figures that will make you pull your hair out and tempt you to throw the figure at the wall in frustration.

I still remember my TF mishaps from back in 2004, when I first came out of my TF hiatus (not counting a short G2 stint in the summer of 94). Not having touched a TF for 16 years, the first piece I attempted to transform was Alternator Smokescreen. I thought I was a TF badass, and my G1 training would be more than sufficient. No words could capture what a gross underestimation that was. I began to fully appreciate the complexity after I started transforming Smokescreen, and I stood in awe of the TF evolution that had taken place in my 16 yr hiatus. But the whole time I was thinking you must be a rocket scientist to transform one of these. 75+ minutes later, after much blood and sweat and tears, I got him into robot mode. There is a sense of accomplishment that comes from completing the transformation of such a difficult piece.

For this post I’m compiling a list of such Transformers. This list is limited to TFs that I have transformed. I know there are difficult TFs out there that belong on here, such as Armada Unicron and Trans Scanning Optimus Prime, but I have not had the pleasure of these toys so I assume nothing. Also, the difficulty is based on my experience of transforming it the first time. Some of these pieces gets much easier the 2nd time and onwards, but is frustrating enough to make you scream in agony on the 1st attempt.

The following 10 figures are not your daddy’s TFs. Choose to transform them at your own risk.
 

10. Sunstorm (Voyager Class)
Series: Transformers Animated
Allegiance: Decepticon
Function: Sycophant
Mode in Package: Robot
Known Redecos: TFA Starscream, TFA Skywarp
Difficulty: Easy

Figures from the TF Animated line are usually not at all difficult to transform, and Sunstorm is no exception. But he’s a classic case of bad instructions misleading the transformation process when it would be simpler to figure it out yourself. Going from robot to jet, I had a feeling the arms would go between the legs at the bottom towards the back, VF-1 style. But the instructions never indicated that you should do this. I wasted a good 20 min trying to do it like the instructions, but the arms just kept getting in the way. Then I finally gave up and simply started placing parts at where I think they should go, and lo and behold the jet mode practically formed itself. Once you know what to do, transforming Sunstorm is a breeze. But the bad instructions earns him a spot on this list.
 

9. Ironhide (Voyager Class)
Series: Movie (2007)
Allegiance: Autobot
Function: Weapons Specialist
Mode in Package: Truck
Known Redecos: all other versions of Movie or ROTF Voyager Ironhide
Difficulty: Medium

Figures from both Michael Bay films are usually on the difficult side, partly because their designs are so radically different from what TransFans are normally used to. Love or hate the Movie designs, the toys themselves did do good of capturing the Movie look, but this meant some very unorthodox implementations in the transforming mechanism. Movie Ironhide gave me a lot of trouble on my first try because he’s got this funky thing you gotta do with the chest part that didn’t seem all too intuitive. At first I thought it was only me, but then I stumbled upon this thread of TransFans discussing their most difficult TFs. Read thru the thread and you’ll see that Movie Ironhide is mentioned repeatedly. Its good to know I’m not the only one that was confused. I don’t have the figure in front of me as I write this, so I can’t recall exactly why the chest area was so mind-boggling, but once you figure it out its not too bad. But it is frustrating enough for inclusion on this list.
 

8. Cliffjumper
Series: Alternity
Allegiance: Autobot
Function: Warrior
Mode in Package: Car
Known Redecos: Alternity Bumblebee
Difficulty: Medium

Alternity Cliffjumper is complex with lots of moving parts, but overall he’s not too bad. The only real issue is in the legs. There’s just so much there and its all compacted into a relatively small area which makes it hard to figure out. The instructions did not help me in this area and I found watching Youtube vids of other people transforming him to be a big help. I gave him a full review some time back. CJ is not the most difficult piece I’ve seen, and I’m betting other pieces in the Alternity line is just as complex if not more so. But he is the most difficult I’ve come across since I started this blog so I put him on here.
 

7. Optimus Prime (MP-04)
Series: Masterpiece
Allegiance: Autobot
Function: Autobot Leader
Mode in Package: Robot
Known Redecos: MP Optimus Prime (MP-01), MP Ultra Magnus (MP-02), US versions of Masterpiece Optimus Prime, MP Nemesis Prime (upcoming)
Difficulty: Medium

MP Optimus Prime is really not that difficult. I’ve done one round trip (from robot to truck and back) and I really didn’t see any issues, and I feel I can do it from memory if I need to. But he’s on here purely because of the complexity of the figure in terms of the number of steps you have to do to transform him. This is not a figure you can transform fast (at least not for me), because there is so much involved. In essence, not hard to do, but a lot to do. MP-04 is the best Optimus Prime figure ever made hands down, and I expected nothing less from a Shoji Kawamori piece. If you’re a TransFan and you have not transformed him, shame on you.
 

6. Galvatron (Deluxe Class)
Series: Classics
Allegiance: Decepticon
Function: Decepticon Leader
Mode in Package: Tank
Known Redecos: None
Difficulty: Hard

OK, now we’re getting into figures where things can get really frustrating. Galvatron is the only deluxe figure I put on this list, and that’s saying something. There are other deluxe figures that have challenged me (ROTF Sideswipe, Classics Tankor), but Galvatron takes the cake. He is by far the most complex deluxe figure I have ever seen in terms of number of moving parts and steps required to transform. Hasbro really crammed a lot into a $10 figure, and in this case I really can’t say if that’s a good or bad thing. My theory is that Galvatron was originally designed to be a Voyager class figure (which explains the pieces and the complexity), but for whatever reason Hasbro decided to make him deluxe. Adding to the difficulty is that a lot of pieces are designed to come off to prevent you from breaking them. If you are transforming him for the first time, I guarantee some parts will cast off (and I don’t mean in the good way like anime figures).
 

5. Optimus Prime (THS-02)
Series: Hybrid
Allegiance: Autobot
Function: Autobot Leader
Mode in Package: Robot
Known Redecos: Hybrid Nemesis Prime (THS-02B)
Difficulty: Hard

Hybrid G1 Optimus Prime can be thought of as a miniature version of the MP-04. But when you take one of the largest figures in the TF universe and shrink it down to one of the smallest, all while keeping much of the same complexity, the figure becomes frustrating. Hybrid Prime is not even 4 inches tall. Trying to transform such an intricately small piece would test the hands of even the most dexterous. My hands are small by guy standards, and I had a difficult time with Hybrid Prime. The overall mechanism on the Hybrid is dumbed down a little from the MP-04, but the complexity is still too much for a figure of this size. On the toy there are also these pieces covering Prime’s hands that love to fall off. To add insult to injury, Hybrid Prime’s truck mode looks unflattering at best. It kinda leaves a bad taste in your mouth when you realize you spent a good amount of time and energy to produce an alt mode that many have described as box on wheels. I did one round trip of this figure (robot to truck and back) and I’ve had enough. I will probably never transform this piece again, unless someone pays me.
 

4. Smokescreen (Alternator #1)
Series: Binaltech/Alternator
Allegiance: Autobot
Function: Diversionary Tactician
Mode in Package: Car
Known Redecos: Alternator Silverstreak (#4), Alternator Ricochet (#20), Binaltech Smokescreens (both BT-01, both BT-07), Binaltech Streak (BT-03), Binaltech Asterisk Alert (BTA-01), Binaltech Bluestreak (BT-19)
Difficulty: Hard

As already outlined in the intro above, Alternator Smokescreen is difficult enough to bring a grown man to his knees. I first attempted this on the Alternator version, but the Binaltech versions transform exactly the same (I got both BT-07s). Smokescreen looks good in both modes so the transformation is well worth it. I’ve done 3 or 4 round trips now, and it does get a little easier with each attempt, but he’s still quite a challenge. Smokescreen kicked off the Binaltech/Alternator line, and even after a dozen or so molds later (and all of them challenging), he still remains one of the most difficult.
 

3. Brawl (Leader Class)
Series: Movie (2007)
Allegiance: Decepticon
Function: Ground Assault
Mode in Package: Robot
Known Redecos: Movie Deep Desert Brawl
Difficulty: Super Hard

Of all the TFs I opened, Movie Leader Class Brawl gets the proud distinction as my least transformed Transformer. I got him around late 2007, and to this day I have not even made one round trip transformation of this figure. I got him from robot to tank, twice. Let me explain. I bought him at TRU. He comes in robot mode, and after I got him to tank mode, I realized there’s a peg that came broken (this is unlike Samurai Prowl, where I broke the peg). So I returned him and bought another at Amazon, where I transformed him again from robot to tank. So yeah, I did this twice, but never from tank back to robot. He’s stayed in that tank mode for 2+ years now. The reason I haven’t even tried is because he’s so damn difficult. The first time it was hard, and the 2nd time it didn’t feel much easier, so I just left him in the alt mode. But that tank is pretty good looking, and he’s got some cool lights and sounds, so definitely worth the effort to transform him.
 

2. Optimus Prime (Leader Class)
Series: ROTF
Allegiance: Autobot
Function: Autobot Leader
Mode in Package: Robot
Known Redecos: None so far, some upcoming in 2010
Difficulty: Super Hard

There’s hard, and then there’s HARD. ROTF Leader Class Optimus Prime is not for the faint of heart. This is an updated figure over the 2007 Movie version. While the 2007 version was already very good, the ROTF version improves on it by leaps and bounds by being much more movie accurate in both transformation and appearance. However, this figure will test your skills as a TransFan. Keep in mind that ROTF Prime was made to be a toy, and not a collector’s piece, yet I put him at #2 on this list which means I feel he is more difficult than most MPs and Binaltechs. I applaud any TransFan who can do this piece without looking at the instructions. Not only are there a gazillion steps, each step must be performed in the right order or you wind up backtracking and undoing steps you’ve done to account for stuff you didn’t do. And once you know what to do, actually doing them is no easy task. There are so many pieces on this thing that if they’re not combined in perfect harmony, they don’t combine. I know all this sounds tough, but you feel a great sense of pride and accomplishment when you get him into that equally awesome-looking truck. If you are attempting this, just know that all the pieces on this figure are designed to come together, and with enough time and patience you will get there. I’ve done 3 or 4 round trips of this now, and each time it is still a challenge, but going from truck back to robot is not half as bad. On the box it says age 5 and up, and I’m sure there are some genius TF kids out there, but I sincerely believe this is not for the typical 5 yr old.
 

1. Megatron (MP-05)
Series: Masterpiece
Allegiance: Decepticon
Function: Decepticon Leader
Mode in Package: Robot
Known Redecos: None
Difficulty: Excruciatingly Hard

Masterpiece Megatron. These words alone evoke pain and fear from all TransFans, much like Megatron’s name evokes the same feeling from Cybertronians all over the galaxy. Ask any TransFan worth his Energon to name the most difficult TF ever, and 4 times out of 5 MP Meg will be the answer. The complexity of this piece is unquestioned. Like the MP-04, there’s a lot to do. But unlike MP Prime, many of the steps required to transform him is not by any means easy. MP Meg is designed to be a collector’s piece and it shows in the construction. He is more delicate when compared to TFs of the “toy” variety, but at the same time, he’s got some parts and pieces where some force is required to budge them from their place. So on one hand you need to apply pressure to transform him, but on the other you need to be careful that you don’t break such an expensive piece. MP Meg is the only TF where my hands actually began to hurt midway thru, because of the tight pieces and the sharp angles. Transformation from gun back to robot is equally as hard as robot to gun. To this day I have only done one round trip, and I’m hoping it will be easier on future attempts now that I’ve loosened up the pieces somewhat. SEANxLONG of TF Youtube fame has described this piece as “excruciating”, so he’s selling (or has sold) his. While I do agree with the adjective, I question his choice of selling it because MP Meg is the symbol of the ultimate Transformer challenge. To have this in your collection and to say you’ve transformed it and survived is proof that you belong among the elite of TransFans. Many brave souls were lost in their attempt to transform Masterpiece Megatron. The process may be harmful to pregnant women and small children. Consult your physician before attempting.
 

If you have successfully transformed any of the pieces (or their redecos) listed above, pat yourself on the back and take a bow. You are among TransFans that never give up and never say die. Lesser fans would have threw up their hands in defeat, but you persisted til the end. Leave no Transformer un-transformed!

UQFGCFGSC3RM

I want to remind all TransFans that, when the going gets tough, there is only one thing to do: Transform and Roll Out!

Last weekend I mentioned I got a whole bunch of robots. Well, the sellers of each shipped them super quick, and Wheeljack arrived on Thur and Cliffjumper and the SV-51 on Fri. I work full time so that meant I picked up all 3 Sat morning at the post office. Handing the PO 3 pick-up slips at the same time was a total trip.

Last night I took out Cliffjumper from its shipping box. I already knew how these are boxed since I have the Alternity Primes. I guess I just wanted to see how CJ looks.

The Alternities are fairly small (about standard TF deluxe size) and I like the fact that Takara is using a box of the appropriate size. I hate it when a huge box is used to package a small figure (I’m not just referring to TFs here). It’s misleading to the buyer, it takes up too much space, and it increases shipping cost. However, I’m not a fan of these clear hard plastic boxes. They dent and crack easy, and there’s just no substitute for the charm of a traditional cardboard box. My understanding is that these are the cheapest boxes to produce, and the way they look certainly reflects that fact.

I never opened an Alternity figure before. I had intended to keep CJ in the box too. My premium Transformers usually remains unopened. I like to keep them mint, and at the same time I like to see them go up in value, kinda like an investment. However the box for CJ is already dinged. Take a look at the lower left corner in the pic above. The future value of this piece already took a hit. I could’ve returned this to the seller, but I don’t need the extra hassles and I really wanted to open an Alternity, and so I went ahead and opened CJ.

After taking the figure out, I’m even less impressed with the box. The whole thing just screams cheap. But I’ll stop ranting about the box now, and just show you this one last pic of the back of the box before I move on to the figure itself.

The first thing you’ll notice about CJ in alt mode is his nice paint job. I guess the best way to describe it is a metallic deep cherry red. G1 purists might complain about this b/c CJ has always been the standard red, but I applaud Takara’s decision to go with this alternate red. This shade goes very well with this mold when you see it in person. He’s definitely got a nice reflective tint in the colors that goes very well the die cast exteriors. Speaking of which, the die cast parts gives this figure more weight and it certainly feels nicer than a lot of the cheap plastic crap that Hasbro produces.

In alt mode he’s got rubber tires. He rolls very well on a flat surface. Cliffjumper is a Suzuki Swift (SX4 Crossover in the US) in the Alternity line and the toy designers captured the look of the car extremely well.

All 4 doors on the unit (5 if you count the rear hatch) opens up like the real Swift. When you look inside you can see the seats, even the rear seats. There’s way more interior details here than your typical TF. The steering wheel is located on the right side of the vehicle. This is a Japanese model for sure.

The hood also opens to reveal where the engine is housed. In this pic below, both the hood and the engine cover is lifted up to expose the engine. Keep in mind that the engine becomes his weapons.

Here are some size comparison shots. He’s only a tad bigger than Classics Bumblebee.

Overall, I’m very happy with the alt mode. For a figure of this size, I find no weaknesses at all. He looks nice, got plenty of detail, feels solid, and just exudes quality. Now let’s take a look at the robot mode.

The first thing you’ll notice here is the very G1 accurate head mold. I’ve ranted about this before and I’ll do it again: it sucks that CJ is almost always an exact repaint of Bumblebee. Well not this time. Takara loves you and they gave Cliffjumper a different head mold from the Bee figure, and they’ve done an excellent job in replicating the G1 design. I dare say this is the best looking Cliffjumper head they’ve ever made. Takara most definitely wins points here.

In robot mode, CJ is significantly taller than Classics Bumblebee. I think part of the reason is that the CJ figure’s legs extends out farther. CJ’s transformation is a little bit complex the first time you try it, but if you’re used to transforming Binaltechs, this should not be new for you. The legs are a little hard to figure out if you’re simply reading the instructions b/c there are so many moving pieces there. I suggest you watch Peaugh’s video of Cliffjumper if you are having trouble transforming him. The upper body is not too bad in terms of the complexity, but that’s not to say it’s simple by any means. He does have this automorph feature; when you pull the legs down, the front windshield goes up towards the chest area. This feature works fairly well when you go from car to robot, but in reverse it can be hard to get it to work. You just have to be patient and keep trying until you get it.

As I’ve said before, the engine comes apart and becomes two guns for him. The handle flips out and they insert easily into either hand. These guns look kinda generic, but it is in fact how his guns looked in the G1 cartoon. Cliffjumper’s G1 figure did not come with weapons and his guns are simply something conjured up by the cartoon designers. It’s nice to see the toy designers of this figure pay homage to that look and give us real guns that CJ can use.

CJ has awesome articulation. The arms can be positioned in a variety of ways. In the legs, he’s got good pivots in the knees and in the feet. The head is on a ball joint and can be turned all over. The only place missing articulation is in the waist, but I’m not really complaining here. The figure is also nicely balanced. I was very impressed with how easily I can make him stand on his legs, considering there’s so much articulation there. CJ is very solid in his construction and certainly hold his poses well.

My first gripe about this figure is the “chunkiness” that other fans have complained about. I suppose these pics really add that extra 10 pounds, but in person the chest area doesn’t look much better. There is quite a bit of bulk there, and I wish the toy designers added some extra mechanism to reduce that extra mass.
CJ: “Jazz, we’re not getting away!”
Jazz: “Well duh… you’re too heavy. Too much energon again?!”

My only other gripe about this figure, and all Alternities in general, is the cost. I paid $47 for CJ, most dealers ask $50+. The figure is simply too small to justify the cost. Only the most hardcore TransFans like myself would even consider paying this. Sure, he’s got a decent level of die cast parts, but still. Binaltechs were much larger (more than twice the size) and they were die cast too, and their cost was about the same.

But overall, I highly recommend Alternity Cliffjumper. If you are a TransFan deeply affected by G1 values, this figure will not disappoint. We have a figure even Casey Kasem would be proud. The price and the chest bulk are concerns, but he’s got way too many positives that easily overshadow his shortcomings. Not only that, if you’re a fan of G1 Diaclone car figures, you owe if to yourself to check out the Alternities. As I was messing with CJ today, I could not help but feel brought back to the mid 80s when I was playing with those figures. Alternities are much more complex than Diaclones, but they are about the same size, they are constructed out of quality materials such as die cast metal and the rubber tires, and they place a heavy emphasis on accurate alt modes. Some TransFans have suggested that Binaltechs are a continuation of those values, a second coming to the golden days of TFs, if you will. But I think with Alternities that’s even more true. Alternities are the very embodiment of the TF spirit that the Diaclones stood for. Again, price is a factor, and I question the choice of turning the alt modes of some characters into sports cars that never were. But this is as close to G1 as we’re ever gonna get without going backwards, and I would love to see this line continued for many more years.

Prime: “Cliffjumper, commence countdown.”
CJ: “5, 4, 3, 2, 1, Transform and Roll Out!”

I’m starting the new year right! This weekend I bought some more Transformers and Macross stuff and I got good deals on all of them. Here’s what I acquired:

Macross Zero SV-51r Gumma Nora Type Valkyrie 1/60 Scale by Yamato
Yamato always produces great Macross fighters. My most recent Yamato purchase before this weekend was the VF-11B from Macross Plus. Other Yamatos I have include the 1/60 scale YF-19 (with fold booster and fast pack, purchased separately) and a whole bunch of 1/60 VF-1 fighters that were made in the early 2000s (non-Perfect-Transform versions). I am happy to add the SV-51r to my Macross collection. The best part: I found a brand new one for $160 shipped! The English site of AmiAmi had one on sale at 50% off which was only about $113. Shipping from Japan is expensive, but at $160 total it’s still a steal for a Perfect Transform 1/60 scale Yamato. I’ve wanted the SV-51r for a while now. It’s very different from fighters in the VF line and I can’t wait for this piece to arrive.

Transformers Alternators Wheeljack by Hasbro
I love figures from the Binaltech/Alternator line. This line is now officially discontinued and there are figures I regret not buying when I had the chance. Alternator Wheeljack is one of these figures. Prices for Alternators are usually ridiculously high on Ebay, and for Binaltechs it’s even more so. But this weekend I was able to find one at a reasonable price. I won the auction at about $30 shipped for a brand new Alternator Wheeljack. Not a bad price at all considering what some other dealers ask for. I already have the Grimlock mold (in both Binaltech and Alternator) so I know how this transforms, but Wheeljack does have a different head mold and nice blue racing stripes that makes it worth adding him to my collection.

Transformers Alternity Cliffjumper by Takara
When I first started this blog, I made a post about whether or not I should buy Alternity Bumblebee and Cliffjumper. Well, this weekend I finally caved and saw a good auction for Cliffjumper on Ebay, so I went for it. I won the auction at $47 shipped. This was pretty much the pre-order price at many online toy sites, but I missed my chance and now most dealers are asking for him in the mid-50 dollar range. I’m glad I was able to find one without paying any markup. The only reason I hesitated on pre-ordering these guys is b/c Seibertron made a post about his chest and mid section being too bulky, resulting in a chubby figure. But then I saw this Youtube review by Peaugh that offered a very different opinion. So yeah, had to have him. Now I still need to buy Bumblebee.

I just paid for all these guys and I’m hoping they arrive in a week. I will be doing reviews of all of these… if I decide to open them. So stay tuned…

I’m off to see what else I need to buy… keep shopping my fellow TransFans… Transform and Roll Out!

I am still home for the Holidays, and today I am going to show you all my figures from Transformers Generation 2.

Yes, I admit it, I have G2 TFs. In my “About” page and some other posts, I mentioned that my TF “hiatus” ran from 1988 to 2004. That is not technically accurate. In the summer of 1994 (right after sophomore year in college.. oh how I miss those days) I bought several G2 figures, all of them you see in the pics below. 1994 was also the first year that I attended Anime Expo (and had a blast), and I think that may have helped to get me looking at toys again. But this TF love affair lasted only a few short months, and let’s face it, G2 was a very forgettable era in TF history. So can you blame me when I usually don’t mention G2? Heck, most casual TF fans don’t even know what G2 is.

Back in college I never thought I buy toys again for myself (oh how wrong I was!). I remember the first time I saw them in 1994, I was at Fedco. I kinda miss Fedco. Anyway, I went to the toy section looking for video games for my Sega Genesis. Back then I was not in the habit of going to the TF aisle so I’m not sure how I ended up there, but now looking back, I’m glad I did. I saw the G2 version of Sideswipe and my jaw dropped to the floor. I was under the impression that TFs were dead for good (again how wrong I was), so you can imagine my amazement when I saw them revived. I have always loved the G1 Sideswipe mold and I never had him during G1. I wasn’t really digging the black, but heck, I was beyond thrilled at seeing TFs make a comeback. And so I quickly bought him. I think in that same trip I also saw some G2 Aerialbots and a G2 blue Grimlock. But being the poor college student that I was, Sideswipe was really all I could afford at $14.99.

G2 may have started out as all repaints of G1, but eventually G2 came out with brand new figures of original characters. They were mostly forgettable. G2 certainly had very little impact as a whole, and even I stopped buying them after that summer was over. But it did make one lasting contribution: it indirectly coined the term “Generation 1”. The 80s toy line were retroactively termed G1 to distinguish itself from G2, and are officially referred to as such even though the term was never used during its original run.

Below are pics of all my figures from G2.

G2 figures, like G1, have no articulation whatsoever. About all you can do with them in robot mode is have them stand there with raised arms. All my G2 figures are in pretty good shape still. I would rate them C8 or better. I think I got most of them at either Fedco or K-Mart.

I have a total of 7 figures from G2. I will describe each of them in depth, starting with the G1 repaints.

Sideswipe
He needs no introduction. Mold-wise, the G2 version is identical to G1. I think this mold still holds up well today. He is diecast, something sorely lacking from today’s figures. The black and red colors on this figure appears to be swapped from the G1 version. I don’t like the green stickers that say “Sideswipe”, and instead of his G1 shoulder-mounted launcher, G2 gave us a green hand-held launcher with blue missiles that look completely out of place. It is also possible to mount this launcher on him in alt mode, but having this awkward weapon attached on the car takes away from the sexiness of the Lambo, so I rather leave it off.

Beachcomber
He is the florescent green dune buggy in the front. In G1 he was blue. Another mold where G2 is identical to G1. He’s got rubber tires and he rolls well on a flat surface.

Cliffjumper
Officially, he is Hubcap. But my theory is that Hasbro meant to do Cliffjumper and someone simply messed up when it came time to do the profile. I mean, why do Hubcap? Cliffjumper is much more recognizable. Plus he’s got the red. I think of this figure as Cliffjumper and I’m listing him as such.

The following are unique G2 figures.

Rapido
He’s the red sports car with number 19 on it. He’s part of a group called Axelerators. I guess the gimmick here is that their engines “become” their weapons. Notice I didn’t use the word “transform”, because it doesn’t. I know this sounds silly today, but back then this was a new-ish feature. All the Axelerators have fairly simple transformations, but for the size you can’t really complain. I like Rapido’s alt mode, nice and sleek. He’s the leader of this bunch.

Skram
Another Axelerator, he’s the blue Corvette-looking one. Kinda reminds of Tracks.

Windbreaker
The last Axelerator in the pic, he’s the orange Camaro-looking one. In the pics here he looks more yellow, so he kinda reminds me of Movie Bumblebee.

Jetstorm
The only Decepticon in this post, he’s the larger Dune Buggy in the back. He’s part of a sub-group called Color Changers. The gimmick here is there are parts of him that will change color on contact with water. Not only that, his weapon can be loaded with water. Pushing the pump will squirt it out thru the nozzle. Kind of a crazy gimmick, but entertaining. As for the figure itself, I like his alt mode and his bot mode.

Well, there you have it, my G2 Collection. G2 figures are pretty cheap on Ebay so I may buy more if I see some good deals. They’re not as cool as G1, but can be a fun distraction from time to time.

G2 Transformers… Transform and Roll Out!