When people say March, I think March Madness. It is my favorite time of year as far as sports go. The NCAA Men’s Division I Basketball Championship has my full attention once it gets going. Especially when UCLA does well. But even when my alma mater makes a surprisingly early exit (like this year) or fail to make the tournament altogether (like last year), I still follow it closely to see how well my bracket does in the office pool, or whatever other pools I happen to participate.

As for Transformers, there was a madness this March as well. I didn’t think I was going to get this many TFs this month. In fact, I was kind of counting on a TF drought. So it was a total shock when I added up all the March figures when the end of the month was coming. Ever since I started tracking my purchases every month, this was the 3rd most action packed month, behind only February 2012 and October 2012. I was fairly busy this month too, which makes me wonder when I even had the time to hunt for these TFs. But whatever. Feast your optic sensors on the Transformers below.

• Generations Fall of Cybertron Blaster and Steeljaw, Walmart, $22.96

• Transformers Prime Beast Hunters Smokescreen, Walmart, $15.47
• Transformers Prime Beast Hunters Bulkhead, Walmart, $15.47

• Transformers Prime Beast Hunters Starscream, Target, $15.99
• Transformers Prime Beast Hunters Ripclaw, Walmart, $12.97

• Generations Fall of Cybertron Eject and Ramhorn, Target, $9.99
• Generations Fall of Cybertron Rewind and Sunder, Target, $9.99

• Transformers Prime Beast Hunters Trailcutter, Target, $8.99
• Transformers Prime RID Rumble, Ross, $5.99

• Transformers Prime Arms Micron Jet Vehicon General, amiami.com, about $23 shipped

• FansProject Car Crash, bbts.com, $59.99
• FansProject T-Bone, bbts.com, $59.99

• Year of the Snake Fall of Cybertron Omega Supreme, bbts.com, $99.99

As you can see, that’s a lot of TFs! Especially since I wasn’t expecting all that much. 7 figures came out of Fall of Cybertron, 7 figures from TF Prime, and 2 independents from FansProject. That makes a total of 16. Certainly a busy month to say the least.

Problem with buying so many TFs in one month is that you just don’t have time to process all of them. I can’t believe I’m saying this, but recently I have become backlogged in opening my Transformers. I’m almost wishing for a TF drought, so I would have the time to properly give each figure the time that it deserves.

As of this writing, I have only opened 4 figures of the 16: Smokescreen, Bulkhead, Car Crash, and T-Bone. I’ll open the rest sooner or later, preferably sooner.

I highly recommend Smokescreen. Bulkhead is ok. Buy him if you got the money to spare, but if you’re on a tight budget then you may want to reconsider.

Car Crash and T-Bone are both smaller than I expected. Early reports of these latest FansProject offerings is that they’re somewhere between scout and deluxe size. They were right. In robot mode they are exactly between these 2 sizes, and in car mode they’re barely bigger than scout. So at $59.99 each, I don’t think they are good value. Also, transformation from robot to car is kind of a pain in the boron compressor. They’re not complex figures, but getting all the tabs to line up to connect takes some effort. They are not figures that I can transform fast for that reason. Still, the figures do look good. They are well articulated and well built. I’ll reserve final thoughts about them after I see the combined Menasor mode.

The only repeat purchase here is RID Rumble. I know I said no more doubles, but I got him purely for the extra pile drivers that I will put on AM Rumble. Besides, he’s so cheap at $5.99. Yes I broke the rule. Sue me.

Year of the Snake FOC Omega Supreme is huge! This is Omega done right! I look forward to some quality time with this piece.

So that’s it for March. There’s a lot more that I wanna talk about, but I think I need to go open these TFs first. Til then, let the March Madness continue. Transform and Roll Out!

This week I will be receiving 2 figures from FansProject, T-Bone and Car Crash. These are obvious homages to G1 Stunticons. Growing up, this was the favorite combiner team for most of my friends. And for good reasons. They are all high-end sports cars (with the exception of Motormaster). They are all kick-ass rebels, even choosing to ignore Megatron’s orders from time to time. And Menasor could possibly be the most powerful combiner in G1. In the cartoons, I don’t remember him losing any fights to any of the other combined gestalts.

Since Hasbro will not give us proper CHUG remakes to this fan-favorite combiner team, it is once again up to FansProject to step up to the plate. I will be receiving T-Bone (Wildrider) and Car Crash (Breakdown) very soon, and I look forward to checking them out for myself. I’ll make another post when I get them, but for now, check out these pics below.

On completely unrelated news, March Madness 2013 is currently going on. I watched as many games as I could have starting this past Thursday. First 2 rounds are now over (I know, they renamed it Round 2 and 3, but these new names just don’t work for me) and we’re down to the Sweet 16 as I write this. The obvious Cinderella that is getting everyone’s attention is FGCU, or Florida Gulf Coast Univerisy, a 15 seed! Has a 15 seed ever made it to the Sweet 16? I honestly don’t know. They took down goliath Georgetown and up and coming San Diego St to get here. Safe to say that no one’s heard of FGCU til this weekend, not counting the locals. Congrats to the Eagles!

But on a more personal note, my bracket is still in good shape! For my Final Four, I picked Louisville, Ohio St, Florida, and Indiana. All 4 schools are still alive in the tournament. I can’t even remember the last time I did this well. Last year, I picked Missouri to win it all and they were bounced in the 1st Round! The year before that, I can’t remember who I picked, but I remember not doing too well. The thing that sticks out from that year is UCLA winning in Round 1 against Michigan St, but then losing to Florida in Round 2. I remember following the scores on my phone for that Florida game. The Ex wanted to go to Whole Foods so we did. I let her do her thing while I just followed the game on my phone. UCLA did even worse this year by making a Round 1 Exit. That hurts my Bruin pride, but I didn’t project them to go far anyway, since Florida was waiting for them in Round 2. And besides, I got a real shot at winning the office pool. Currently I’m in 2nd place, but I have the most potential points left. I won’t say what is my pick to win it all in fear of jinxing it, but right now they sure look like the team to beat.

Long live March Madness! Transform and Roll Out!

Happy New Year! To kick off 2012 right, I’m going to show off my FansProject Insecticons. All 3 figures were released in 2011, and by now there are so many other reviews out there that go into the awesomeness of this trio. I mentioned buying them back in this post.

For those that don’t know, FansProject is a third party not officially associated with Hasbro. And since Hasbro won’t do Insecticons in the CHUG line for reasons that elude me, FansProject saw fit to give us proper homages to this mischievous Decepticon subgroup. They’re not cheap though. Each figure cost about $50. But they are well worth it. FansProject’s interpretation of these characters appear to be insects that transform into mechanical ninjas. Personally I think that’s an excellent interpretation, since in G1 the Insecticons were small, quick, and causes lots of havoc.

However, there is one glaring weakness with these figures, and it is the dull grey plastic look of their weapons. So once again it’s Gemini to the rescue. He painted the weapons silver and shiny. Check out the before and after pics.

Before:

After:

The silver paint really brings out that extra something in these figures! I really admire FansProject, but why didn’t they paint them silver to begin with? Would silver paint really cost that much more to do? I don’t know, but I’m glad I had mine painted.

Below are more pics to show off all this bling.

Insecticons forever! Transform and Roll Out!

I recently had my pile of loot shipped out from BBTS. The first order in this pile was placed in early September, and I had it shipped middle of this month. This is the first time I’ve used POL. I gotta say, it’s a pretty cool feature to save on shipping. More on this later, but here’s what I had in this order:

• CA-03 Thundershred
• CA-04 Stormbomb
• CA-05 Backfiery
• Hercules Exgraver
• Voyager 2010 Series 02 – Battle Blades Optimus Prime
• Japanese Transformers Animated – TA02 Bumblebee
• Headrobots: Blood the Dark Warrior Upgrade Kit

As you might expect, all this stuff requires a Big Bad Toy Box.

It only cost about $10 to ship this. If you can combine orders into one shipment, which is what the POL feature is intended for, you can really save $$$. If I shipped all this separately, shipping cost would have easily came to around $40.

As of now I’ve only opened Exgraver and Bumblebee. Exgraver is an awesome figure! I plan to do a full review soon. The Japanese Animated Bumblebee is way better constructed than the US version. The shiny paint is a plus too. BBTS had this on sale. I recommend getting this one over the American Hasbro figure.

I can’t wait to check out the FP Insecticons. I had Battle Blades OP before, but it was defective so I returned it. Hopefully there are no issues with this one. Blood the Dark Warrior Upgrade Kit is designed to work with ROTF Bludgeon. I had to get this after seeing these pics.

Most of these are not official Hasbro/Takara products. I salute the 3rd party companies that will give us fans what Hasbro and Takara will not. Transform and Roll Out!

Last month I made an order from TFSource.com. The order was shipped through Fedex. I’m not the biggest fan of Fedex and this recent order has further reaffirmed that sentiment. I’ll spare you all the details of everything that went wrong with this shipment, but this afternoon it finally arrived. Every item in my order appears to be intact. Here’s what I got:

• Predaking 2010 Reissue Boxed Set by Takara
• BTS-03 G1 Prime Matrix of Leadership Upgrade Set by BTSToys
• TFX-04 Protector Trailer by FansProject
• TFX-05 Sidearm by FansProject

They shipped this in a pretty big box, though its not the biggest box I’ve received for ordering collectibles. Here’s a pic next to a soda can for size comparison.

TFSource is known for packing their items well and I would have to agree.

All items are brand new, but to save money I bought all C9 versions. As far as I can tell, the boxes for TFX-04, TFX-05, and BTS-03 all seem perfect. However, the box for the Predaking set is flawed. Below is a pic.

Notice the side of the box is kinda pushed out. There is a piece of tape holding the side panel in place. The tape looks factory to me, but I really don’t know. Not sure if a C10 would be better, and I’m not sure if Takara boxed them up bad or if TFSource messed with it. But regardless, I’m not too concerned since I plan on opening this set. I’m cool as long as there are no issues with the figures. As a kid I dreamed of owning the Predacons. In my youth, there was no way my parents would’ve bought me all 5 Predacons, and my allowance was next to nothing. There was a reissue set in 2005. This was around the time I got back into TFs. Most dealers asked between $150 to $200 for the set. That amount can seem like a lot when you’ve just started to buy TFS. So I hesitated, and before I knew it they were all sold out. 6 years and 350 TFs later, I’m now kinda desensitized to TF spending and I didn’t even blink when I chose to buy it this time. In retrospect I’m glad I didn’t buy the 2005 set, because I hear the 2010 set has die-cast and the 2005 set does not.

I am on a mission to have all the G1 Combiner sets. The figures could be G1 or reissue. I now have 4 Combiner teams complete: Combaticons (G1), Technobots (G1), Seacons (reissue), and now Predacons (reissue). I have some other figures of various teams from G1: Air Raid, Breakdown, Dragstrip, Dead End, and Seawing. Dead End is missing all accessories, and Seawing is kinda unnecessary since I got the complete Seacon set as a reissue. I’ll be looking for other Combiner figures, and I’m hoping Hasbro/Takara would do more reissues.

I’m looking forward to opening the other items as well. Actually, I already opened BTS-03 and I’m really liking this upgrade set. I like it so much I may review it in a future post. And I’ve heard nothing but good things about the Protector armor and Sidearm, so it’s a pretty sure bet I will be impressed with those.

As a sidebar, this is my 100th post on this blog. I’ve been enjoying the experience and I will keep this blog going for as long as I can. Long Live TFs! Transform and Roll Out!

FansProject is currently developing an add-on kit for Classics/Henkei Rodimus. I first reported this add-on kit back in April of this year. FP have recently released color pics of the set. Appearance wise, this kit is shaping up to be excellent. If the quality of this add-on is anywhere close to the usual high standards of FP products (and I have many), then we can assume we have another winning product on our hands. But enough talking. Check out the pics below.

Many reputable dealers are already taking pre-orders for this set. Get yours now! Transform and Roll Out!

There appears to be a drought of TFs released by Hasbro over the last few months, at least for me on the West Coast. I think the only figures offered by Hasbro at this moment are the Generations figures and the “Hunt for the Decepticons” sub-line of ROTF figures. I haven’t seen the Generations figures anywhere, despite the fact their sightings are reported all over the internet now and many online retailers have them in stock. I’ve only seen the Hunt for the Decepticons figures at one Toys R Us in my area and they’re supposed to be everywhere too. Oh, btw, I picked up the leader class Starscream recently released in this line. He’s a great figure. I may do a review on him in the near future.

To illustrate my point about the drought, I looked thru my records of TF purchases and since March I have only acquired 3 newly released figures: Animated Arcee, ROTF Mindwipe, and the aforementioned leader class ROTF Starscream. I’ve reviewed Arcee, and both Mindwipe and Starscream are recommended figures. For me, buying only 3 new TFs over a period of 5 months is like Kobe Bryant taking only 3 shots in a game.

However this is not to say I only bought 3 figures for this entire period. I did buy more TFs, but they are either old figures that I never got, old figures that I decided to get more of, or non-Hasbro Transformers (such as FansProject products). And I pre-ordered some TFs recently, which is the topic today.

I’m really not a fan of pre-orders. I only do them when it appears that pre-ordering is the only way I’ll be able to get something. If possible, I prefer to just go down to the store and buy my TFs (or any other collectibles for that matter), or wait until after the whole pre-ordering period and buy them from any number of sources. I realize that retailers like this system b/c they can use it as a way to gauge demand. And sure, pre-ordering gives the impression that if you pre-order, you will have “secured” the item and thus you will be guaranteed a copy when it’s released. But this system really doesn’t solve anything for the consumer. For extremely limited items, all it does is move up the point in time at which potential buyers compete to place the order. At the time of pre-order, there are usually no real reviews of the item from other people, so if the item turn out to suck, you’re stuck with it. Pre-orders usually can’t be canceled, and the item often can’t be returned or replaced. Some retailers even require part or whole payment up front. Sometimes the retailer don’t get enough stock from their distributors, so even if you pre-order you’re still not guaranteed one. And sometimes the retailer gets way too many that after the pre-order period, they can’t get rid of them fast enough so the item becomes way cheaper than what you paid for it. And more often than not, pre-orders don’t get released at their stated release dates, so budgeting can be an issue for the hardcore collector. The whole system just sucks.

Anyway, sorry about the rant. This wasn’t the purpose of the post. I guess when I started to think about pre-orders, how much I hate the system just flooded over me. Most of the pre-order horrors that I experienced had to do with anime PVCs (which for the most part I no longer collect). Fortunately, I usually don’t pre-order TFs. But it does happen from time to time and stuff I pre-ordered recently appears below.
 

Crossfire 02 Munitioner and Explorer by FansProject
I touched on these already. Look at this post for the full details. However I just pre-ordered on these last weekend from TF Source. I got the combo deal so I saved myself $7.99, though that’s really not a whole lot considering how much they are to begin with. Supposedly their release is pushed back to late August, but some fans appears to already have them in hand! I don’t know what the deal is, but FansProject is obviously done. I can’t wait to get mine.
 

G1 Seacons by Hasbro, exclusively from BBTS

At Botcon this year, news came around of a re-issue of the complete Seacons set in their G1 colors. Supposedly the Seacons have never been re-issued since G1. I’m not sure if this was meant to be a Botcon exclusive at the time. This is an official Hasbro product, but it is released exclusively thru BBTS, and it might have first been available at Botcon. So yeah, not sure what is the exact nature of this threesome, but BBTS is making this available to everyone on their website. There is a July release that retails for $74.99, and a later August release that is slightly cheaper at $59.99. I’m on a mission to buy all the G1 combiners so buying this was a no brainer. But I’m not in a hurry to get this so I went for the August release. Check BBTS for complete details. I have two Seacons from G1, Seawing and Overbite. Seawing is complete and in great shape. I think I got him at a Osco Drug. Overbite is in good shape too, but I don’t have any of his accessories. Actually, I don’t even remember buying him. But regardless, I’m glad at the chance to own the whole set.
 

Faith Leader by iGear

The Masterpiece G1 Optimus Prime figure has been around for quite some time now. It is hands down the greatest Optimus Prime figure ever made. Size-wise, this figure was made to scale with other MP figures (up to a certain point) and figures from the Binaltech/Alternator line. While that’s great, Hasbro has been scaling down the figures in recent years. For example, MP Grimlock is only about the size of the MP Seekers, and Alternity figures are way smaller than Binaltechs/Alternators. This creates a problem for MP Prime as he is now way too big in relation to these newer figures. And so enter iGear. Like FansProject, they are in no way related to Hasbro. Their PP01“Faith Leader” is supposed to be every bit identical to MP Prime, with the exception that it’s smaller so it will scale better with classic figures and MP Grimlock. Faith Leader in truck mode is almost the exact same size as Classics Optimus Prime in truck mode, but in robot mode Faith Leader is much bigger. I’m told the first batch of PP01 sold out real fast. So when the 2nd PP01 went up for sale, I pre-ordered with a quickness. Faith Leader is about $100 with around $18 ship to the United States. It is available only thru the iGear website and they require payment upfront. These policies definitely made it a turn-off and normally I would not even consider playing by these rules. But this is something I really want and I’ve heard good things about the figure so I pre-ordered one. I normally don’t keep track of the statuses of my pre-orders, but I already paid for this in full so I’m watching it with more diligence than usual. Still, my decision to pre-order Faith Leader is somewhat questionable. It’s expensive, there’s no diecast like the MP, you gotta pay in advance, and technically it’s a smaller knock-off of a Hasbro product. This is not a feel-good purchase for me, and I put the blame partially on iGear and partially on myself. Maybe after I get Faith Leader I will have something more positive to say. Peaugh’s video review of the figure appears below.

These are all the outstanding TF pre-orders I have at this time. I’m hoping they will all get to me by the end of August, but with pre-orders you never know. I intend to do reviews of all these figures.

Stay cool my fellow TransFans, and until next time… Transform and Roll Out!

2010 is looking to be a banner year for FansProject. Their next offering are two figures called Explorer and Munitioner. Hardcore G1 purists should instantly recognize them as Blastoff and Swindle, respectively.

Late in 2009, Hasbro released a Target exclusive Bruticus Maximus set under the ROTF line. This is a set of 5 Combaticon figures that will combine and form Bruticus Maximus. The toys are essentially a repaint of Energon Bruticus Maximus. Target retailed the set at $29.99. Some stores even sold them at clearance prices over the Holidays, I’ve seen with my own eyes the price dropped to either $24.99 or $19.99. Apparently they weren’t flying off the shelves if Target felt clearance was necessary. I did think about buying the set during that stretch, considering that the Combaticons are my favorite combiner group, something that I’ve mentioned repeated on this blog. However, being the G1 purist that I am, I decided against buying it because I felt the figure did not at all resemble the G1 Combaticons. And to make matters worse, not all molds in the set are distinct. Onslaught, the leader figure that forms the body, is a unique mold. However, Brawl and Blastoff are both tanks with identical molds, and Vortex and Swindle are of the same helicopter mold. This was a complete turnoff. There is also a similar set released under the Universe line (in slightly different colors). I’m not sure when it was released and if it was a store exclusive.

I should have known by now that whenever I complain about a certain aspect in TF figures, the people behind FansProject would have the same complaint. So right after Target sold out of the Bruticus Maximus set, FansProject announced the figures “Explorer” and “Munitioner”. Explorer is a space shuttle while Munitioner is a jeep. FansProject is not affiliated with Hasbro so it’s not like they can outright advertise what these figures are meant to be. But G1-ers immediately recognized them as Blastoff and Swindle, and the fact that only these 2 are produced is to properly give the ROTF Combaticons the right molds for these 2 characters. But yeah, right as I learned of this new development, I started to kick myself for not buying the ROTF Bruticus Maximus set.

FansProject have recently released more finalized pics of Explorer and Munitioner. The figures themselves look great and are obviously G1 inspired. But it also looks like the figures will come with accessories that will make Bruticus look more G1 as well. Words can’t even start to describe how kick-ass this set looks with the FansProject add-on. I’m posting a few select pics below. For all the pics check out this blog entry on the FansProject site.

You can bet your boron compressor that I will be buying Munitioner and Explorer when they are released. I would’ve done that anyway, but after I saw these pics, I knew I had to go track down the ROTF Bruticus Maximus set. Of course all dealers from every website I can think of would mark these up. Getting it at the clearance prices, or even at MSRP, was now extremely unlikely. And so last month I bit the bullet and bought the set from an ebay seller for about $50. This price was actually quite reasonable. I see many dealers ask for much more. I picked up the set at my local PO last weekend and below are some pics.

I won’t be opening this set until Explorer and Muntioner are released. Then I will give them all the proper review it deserves.

And since we’re on the subject of Combaticons, I want to take this opportunity to show off my G1 Combaticons. I still have them all to this day. Onslaught is getting loose in some of his joints, and there are obvious sticker wear to all 5 figures. But other than that they are all complete and in pretty good shape.

Sharp G1 observers will have noticed that Onslaught appears without his blue chest shield. I have the piece, I just forgot to put it on him when I took the pic.

I also have some repainted Combaticons from Robots in Disguise. Technically they’re not called Combaticons in RiD. They are called Commandos, and the names of all the characters have been changed. This is the Urban Camo set (I believe there is also a Desert Camo and a Snow Camo set). The combat trailer is Mega-Octane, the tank is Armorhide, the space shuttle is Movor, the jeep is Rollbar, the helicopter is Ro-Tor, and the combined form is Ruination. Pics appear below.

Let’s face it, all the combiners post G1 have been lame. Hasbro just doesn’t want to properly do one for some strange reason. So once again it’s FansProject to the rescue. I can’t wait for Explorer and Munitioner.

Combaticons… Transform and Roll Out!

In my last post, I mentioned that I will do scans of the instructions for FansProject Warbot Defender (WB001). In case you missed it, my review of Defender appears here.

How are FP instructions better than Hasbro’s? Oh let me count the ways…

• Book format
• Quality color printing
• Quality paper
• A comic book intro
• Detailed instructions with notes and highlighted transforming sections

Hasbro should seriously look at this and take some notes here. Anyway, witness the awesomeness for yourself in the scans below.

Pure awesomeness! Pure FansProject! Transform and Roll Out!

As mentioned in my previous post, I have received Warbot Defender by FansProject some weeks ago. Any TransFan who’s been around as long as I have can instantly tell you that he is really Springer, the green Autobot triple changer first made famous in the G1 Movie.

Up to this point, all products by FP has been accessories or add-ons. Springer is their first attempt at a stand-alone figure, so I wasn’t exactly sure as to how the figure would turn out. Making items designed to enhance Hasbro products is one thing, but producing a full-fledged figure that transforms all on its own (and a triple changing one no less), that’s something else. Well, I’ve had a few weeks to play with this figure now, and I will say first that all my doubts are permanently put to rest. FansProject have given us the best triple changing figure in the history of TFs! This is the Springer figure as he was meant to be. Hasbro should seriously be embarrassed. This figure deserves a full review and that’s what I’m doing today.

Let’s start by looking at the package.

Defender is packaged in robot mode. Size of the box is just a tad wider than your typical Kleenex box. As you can see from the pics above, the box is surrounded by an outer clear hard plastic. This is to protect the box itself. If you choose to not open Defender and want to keep both the figure and the box as mint as possible, FansProject has got you covered with this packaging. But even if do you decide to open Defender, the clear plastic should keep the box dust-free.

The back of the box is mostly Japanese with a few simple phrases of English here and there. In the pic above, the words on the box looks blurry because of the clear plastic. I can’t read Japanese, but I can read Chinese so I’m able to pick out the Kanji portions. To my knowledge, FP is not of Japan origin. I have some theories as to why they went with Japanese. It could be that, by using Japanese, FP is more able to distance themselves from Hasbro, or maybe FP is simply paying homage to early Diaclone packages. Whatever the reason, I’m glad most of the writing is in Japanese. I think it speaks to robot collectors who came out of the early to mid 80s, which really is the intended audience of this figure. The bottom of the box (not pictured) suggests that this piece is for persons 16 or older. This is depicted as a warning because of choking hazards and parts “of a sharp nature”. But seriously, only guys who lived through G1 as kids would even consider buying this given its $78.99 price tag.

Robot Mode
As usual, I begin my reviews with the mode that the figure comes packed in.

The detail on this figure is just amazing! Click on the pic above and see for yourself. This is hard to describe in words, but the details on the figure simply looks sharp compared to your typical Hasbro offerings. The mold and lines of every piece is cut at a sharp angle and it really distinguishes itself from TFs of the toy variety. The paint job is also superb. Defender kinda has a matte finish all over and I really like this look. I don’t see any color goofs and unintended paint splatters are nowhere to be found.

Defender comes with 2 handguns and his G1-famous scimitar that is formed from his chopper blades. Hardcore G1 purists are probably quick to point out that Springer never wielded dual pistols, but in this FP update I really don’t mind. I think he looks cool with the twin pistol action. In the two pics above, the scimitar is stored on his back, on his right side. I didn’t take a pic of this and I probably should have, but just know that FP did design a place for the scimitar when it’s not in use.

Defender is one of the most articulated figures that I have ever seen. The number of places on the arms that you can rotate or swivel is simply insane. He’s got great articulation in the legs as well. The head is on a ball joint, and there is waist articulation as well. He is capable of some great poses, and Defender has no problem holding those poses because he is so well constructed. Most joints feel just right, not too tight and not too loose. Many key joints are of the ratchet variety that’s got the “clicky” feel. There’s diecast in the chest and in the legs. The rest of him appears to be high-quality plastic. There are no manufacturing issues with Defender whatsoever.

In this pic above, you can see one pistol holstered inside his right leg. This works on the left leg as well. Both pistols can be stored when not in use. Very cool.

Below I show some size comparison pics.

The first pic compares Defender to Hot Rod and Optimus Prime in the classics line. In the G1 movie, Springer is a tad bigger than Hot Rod, but not quite as big as Prime. FP most definitely had the classics in mind when they created Defender as his size is perfect in relation to figures in this line. The 2nd pic shows Defender next to 2007 Botcon Exclusive Springer (repaint of Cybertron Defense Hot Shot). This is the only other Springer figure I have in my collection, so I put them next to each other. Defender is taller than the Botcon Exclusive Springer if you look at where their heads are, but overall they are about the same size. These two are also about the same weight-wise. Defender does have die-cast, but Botcon Springer is a bulkier figure.

I do have one very minor gripe about the robot mode. If you stood Defender perfectly erect and looked at him from the side (and I should have took a pic of this), you’ll see that parts above the waist are not in the same vertical plane as parts below the waist. The upper body looks a little bit pushed back from the legs. Appearance-wise this is noticeable, though I don’t think it’s a distraction by any means. But functionally, this makes Defender a little back heavy, so he has a tendency to fall backwards if he is posed perfectly straight and the surface is given a slight shake. Still, this is a very minor gripe and a flaw I can easily live with. I just feel compelled to point it out because I want to be perfectly objective and not one of those TF fanboys that become giddy little schoolgirls whenever a good figure comes around.

To sum up, I’m very impressed with the robot mode.

Ground Vehicle Mode

In the instructions, the first mode to be transformed into is the ground vehicle (Cybertronian car according to some) so I’ll review this mode next.

I thoroughly like the look of this vehicle. All the details that were apparent in the robot mode is also reflected in this mode. In G1, Springer’s ground mode was more of a Cybertronian sports car. FP’s interpretation of this mode is more of an armored vehicle, and I think it works just as well. Defender’s two guns is clearly pegged on the sides. You know FP would account for all accessories in every mode, but if you’re wondering where the scimitar goes, there is room for it at the bottom center of the vehicle (another feature where I should have took a pic).

The transformation into the ground vehicle is not too difficult, but at the same time it’s not obvious either. If you want to do it without the instructions you can, but it will take some trial and error. The transformation process does feel unique, and as a triple changing figure there are lots of moving parts. I only got him into the ground vehicle once, but I felt the process was very cleverly done.

Defender is really durable in this mode. He rolls well on a flat surface. I can’t tell if the wheels are made of metal or hard plastic, but either way, they more than sufficiently support the figure in this mode. Of the three modes, this ground vehicle comes together the best. There are pegs and grooves on each interconnecting piece where appropriate, so the vehicle feels like one cohesive piece. There are no dangling pieces whatsoever, and no parts feel out of place.

This pic shows a size comparison of Defender and Botcon Springer in their vehicle modes. Defender clearly looks more sporty in this mode next to Botcon Springer. Size-wise, Defender is wider, but Botcon Springer is taller.

Overall, the ground vehicle mode is very nice. It might be my favorite of the three modes.

Helicopter Mode

The last mode to be reviewed is the helicopter. I think in the G1 movie, Springer preferred this alt mode over the car.

Transformation into this mode is quite complex. The difficult part is in the arms. I mentioned that Defender’s arms in robot mode is highly articulated, and the reason for that becomes apparent in the transformations. The arms are configured one way in ground vehicle, and they are configured in a completely different way in helicopter. It can be hard to figure out without the instructions. But again, transformation process is clever and FP has done a terrific job coming up with the overall triple-changing mechanism.

I like the look of the helicopter. Unlike the G1 figure where the helicopter looks very similar to the car mode, this figure does not have this problem. The two alt modes look distinct enough from each other. In this mode, parts also come together well and the unit feels solid, though not as much as the ground vehicle mode. The two guns are clearly shown on the sides in the pic above, and as every G1 purist can tell you, the scimitar becomes the chopper blades, so all accessories are accounted for. The chopper blades rotate well in this mode.

Below are various shots of the helicopter from various angles.

There is one more accessory in the package that I need to mention. Supposedly, it works with this one particular display stand (not included) so you can have the helicopter displayed on it if you wish. I’m not sure exactly how this works, and I’m not all that familiar with display stands. But I just thought I mention it in case that’s your thing and it is something that FP has accounted for.

One more thing that I wanted to add is that Defender came with probably the best instructions ever. Hasbro should be ashamed of the usual black and white trash that they include with their figures. I’m thinking of scanning in the Defender instructions as a separate blog post.

So to sum up, I give this figure the highest possible recommendation. All 3 modes look great, and that’s no easy feat. In my opinion, Hasbro only managed this once, and that’s classics Astrotrain. All their other triple changing figures have at least 1 mode that looks awful, sometimes 2, sometimes (gasp!) all 3. This is only FP’s first attempt and they have already surpassed every triple changer that Hasbro has ever made. The awesome transformation, coupled with robust construction and amazing details, makes Defender a required purchase for every G1 TransFan. FansProject claims that they are “For Fans, By Fans”, and it really makes a difference when the people behind product cares about the product.

FP you have my utmost respect and I can’t wait to see what else you have in the works. Transform and Roll Out!