Archive

Posts Tagged ‘Octane’

Transformers Purchased in May 2017

May 26th, 2018 Comments off

Repaints and more repaints! That is the theme this month. There were 7 TFs purchased in May of 2017, and 5 of them were repaints.

I never kept stats on how many repaints there are in a month, but I can’t remember one that was this high. 5 out of 7… that’s more than 70%. Hasbro is being plenty lazy here, but perhaps I’m the sucker for buying so many.

Below I proudly present the TFs where most of these molds has been previously used on a different figure.

  • Titans Return Blitzwing, Target, $24.99

  • Titans Return Octone, Target, $24.99

  • Titans Return Brawn, amazon.com, $9.99

  • Titans Return Roadburn, Toys R Us, $9.99

  • Robots in Disguise Skywarp, Walmart, $14.97

  • Masterpiece Megatron MP-36, amiami.com, ¥17280 (about $159.09)

  • Masterpiece Starscream MP-31, amiami.com, ¥9770 (about $89.95)

Blitzwing and Octone

Blitzwing needs no introduction. As perhaps the most famous Triple Changer in TF history, Blitzwing saw plenty of action in G1, including the G1 Movie. Even casual TransFans could identify both his alt modes: a MiG-25 jet fighter and a Type 74 battle tank. Titans Return Blitzwing is a repaint of Titans Return Megatron. Or to be more precise, Megatron is a “prepaint” of Blitzwing.

In my opinion, TR Blitzwing is way better than Generations 30 Blitzwing. I enjoy the transformation of TR Blitzwing. All 3 modes look pretty good, and it doesn’t have the famous construction issue that Gen 30 Blitzwing had.

It feels weird to write Octone. His name should really be Octane, the fuel truck and fuel jet Triple Changer that came about in G1 Season 3. Titans Return Optimus Prime is a prepaint of Octone.

In the early years of the Generations line, Hasbro released a deluxe version of Octane called Tankor. That figure was really not that good. TR Octone is leaps and bounds superior to Tankor. And just like Blitzwing, all 3 modes are pretty good. There isn’t one mode that is obviously inferior to the rest, like many other attempts at Triple Changers. I commend Hasbro for coming up with modern Triple Changers where all the modes are properly represented.

G1 purists will no doubt argue that Blitzwing and Octane were never Headmasters. They would be right, but I don’t think it’s such a big deal.

Hasbro did make enough mold changes to Blitzwing and Octone that buying these repaints feels a bit more justified. If you didn’t purchase TR Optimus or Megatron, then there is no reason to not buy these 2. But even if you did, I still recommend them. The molds here were always meant for these 2 characters. Sell off Prime and Megs and put Octone and Blitzwing in your collection if you have a no-repaint rule.

Brawn

Brawn is one figure that uses a brand new mold this month. I have a quick review for him here. He is most definitely recommended.

Roadburn

I don’t think there was a character named Roadburn in G1 (though it won’t surprise me if I’m wrong on this). Instead, I think this character is meant to be Chase, a member of the Throttlebots. Roadburn’s color scheme and head mold is a dead on for Chase. I have G1 Throttlebot Chase. I also have ToyWorld’s MP scale interpretation of Chase, called Trace. My Chase collection is now complete with the acquisition of Roadburn. This totally unknown character deserves his 15 minutes of fame. Maybe I will do a separate collection post dedicated to Chase.

Anyways, Roadburn is a repaint of Titans Return Bumblebee. Roadburn has a different head mold, but that’s the only mold difference. Read the post on Bumblebee for my thoughts on this figure. If Chase the character means something to you, then go ahead and get this figure. Otherwise it is a skip. This figure really doesn’t offer anything that hasn’t been done before.

It should also be noted that Roadburn is one of my last in-store Transformer purchase from Toys R Us before the giant toy chain went under in early 2018. I started to write about my thoughts on TRU here, but then it got so long I realized it should get its own post. So that’s what I’ll do. A “farewell to TRU” post is coming soon.

Skywarp

Robots in Disguise Skywarp is a figure I debated about buying. I saw him on the shelves in late April or early May and decided to skip it. He is an exact repaint of RiD Starscream, which I have. I like the figure, but it’s not worth buying again in a different color.

About a week or two goes by, and I gave in to my urges and bought Skywarp. I guess it’s because I like Skywarp the character, I like the figure in the black and purple color scheme, and there was really nothing else to buy (I was not counting on the two MP figs to arrive later in the month). Read the RiD Starscream post for a more detailed discussion about the figure. Skywarp is solid, but not a required purchase by any means.

Starscream

What can I say about MP Starscream that hasn’t already been said? The mold used for this figure has been around for so long and Takara is still abusing it. What I have here is the official 2017 re-issue of MP-11. I’m fortunate enough that my Starscream doesn’t seem too bad, but it comes as no surprise that many fans report inferior construction quality with this figure (loose joints, weak tabs, etc).

I got this re-issue because, up until this point, I don’t have the famous Decepticon Aerial Commander in the newer MP Seeker mold. I have MP-3 Starscream, but that was done in the older MP Seeker mold (with the side skirts, among other things). It’s a crime not to have Starscream updated, so when I saw this re-issue, I bought it. Though, now in 2018 as I write this, 3Ps are doing their own MP style Starscream that appears to be superior (one example is MakeToys Meteor). So in retrospect, maybe I should not have bought this MP-11 re-issue, especially considering the questionable build quality.

MP-11 with MP Thundercracker and MP Skywarp. MP Thundercracker is in the new Seeker mold like the MP-11, while MP Skywarp is in the old Seeker mold like MP-3.

MP-11 in full coronation gear.

It should be noted that having the figure stand with the coronation gear is pretty difficult. It takes forever to position it so Starscream doesn’t fall ass backwards when wearing the full gear. Another reason to not get MP-11.

Megatron

I saved the best for last. Here we have the big prize of the month – Masterpiece Megatron, designation MP-36! This is the other figure having a new mold this month. Much like MP Optimus Prime that was first released as MP-1, then later got an improved but smaller version of MP-10, Megatron first received the MP treatment back in 2007 with MP-5. Now 10 years later, he is getting an updated version as MP-36, and he is meant to scale with MP-10.

MP-36 Megatron is a fantastic looking figure. Imagine if Megatron stepped out of the G1 cartoons and became a solid, tangible figure. That is how MP-36 looks. Take a look at the pics below. I cannot say enough about the show accuracy of this Megatron. He really is something to behold.

Back view. The upper back is a bit messy, but nothing I can’t live with.

Construction of MP-36 is superb. All joints are tight and clicky. No cosmic rust syndrome here.

MP Megs with the famous MP-10. Look how well they scale together.

MP Megs with his top MP lieutenant.

MP Megs up close and personal.

Look at all these accessories!

Obviously I never even took these out of the box. There’s a lot here to accessorize the Decepticon leader with. Other than the scope / fusion cannon, included are:

  • The silencer
  • The stock
  • 3 alternate face plates
  • Key to Vector Sigma
  • Energy sword (appears in the epic fight with Optimus Prime in the G1 Movie)
  • Pistol (also in the same fight)
  • Damaged chest plate (as a result of same fight with Prime)
  • Energy ball and chain (during fight with Optimus Prime, in Ep2 of More Than Meets The Eye, which he only used once ever)
  • Helmet (used in some Ep in G1 that I no longer recall)

I’m ashamed to say that, even after having this figure for about a year, I still not have transformed it. It’s not that I don’t want to. I took a quick look at the instructions, and it is more than daunting. This figure could very well make it into a top most-difficult list (btw, I really need to update that post and make a 2018 edition). I promise I will transform MP-36 soon.

Grades for the month:

Recommended:

  • TR Blitzwing
  • TR Octone
  • TR Brawn
  • MP Megatron

Mediocre:

  • TR Roadburn
  • RiD Skywarp

Not recommended:

  • MP Starscream

Again, TR Brawn and MP-36 Megatron are the only new molds in this list of Transformers. All others are repaints, and their purchase is at your discretion.

The Decepticons far outnumber the Autobots this month. Poor Brawn and Roadburn… these 2 tiny Autobots had better get back to headquarters and rustle up a few more friends (G1-ers will recognize this reference from Fire on the Mountain).

Transform and Roll Out.
 

Categories: On The Hunt, Pics

Decepticon Power!

July 25th, 2017 Comments off

Quick post today. I got a bunch of Decepticons out and lying about. So it’s time for Megatron to lead the troops into battle and kick some Autobot ass!

Check the pic below.

This roster of Decepticons won’t take crap from no one:

  • Masterpiece Megatron (MP-36)
  • Masterpiece Starscream (MP-11)
  • Titans Return Octone (Octane)
  • Titans Return Blitzwing
  • Titans Return Sky Shadow
  • Titans Return Kickback
  • Robots in Disguise Soundwave
  • Robots in Disguise Skywarp
  • Last Knight Barricade
  • Warbotron Bruticus – Fierce Attack, Air Burst, Whirlwind, Sly Strike, Heavy Noisy

Autobots everywhere had better beware. This collection reminds me of the time I gathered this group of Decepticons.

Transform and Roll Out.

 

Categories: Pics