There are quite of bit of figures taking up room on my shelf. Before I put them away, I’ll give them their 15 minutes of fame and feature them in a post.

Same pic, different angle.

From left to right
Top shelf, in robot mode: MMC Bovis, TFP Beast Hunters Shockwave, Fans Toys Quakewave, Masterpiece Acid Storm, Generations FOC Thundercracker
Top shelf, in alt mode: Generations Megatron, Generations FOC Kickback, Generations Blitzwing, TFP Breakdown, TFP Silas Breakdown, Generations FOC Shockwave
Middle shelf: Generations Orion Pax, Generations Bumblebee, Generations Springer, Generations Sandstorm, TFP Beast Hunters Optimus Prime, TFP Beast Hunters Ultra Magnus, , Generations Hoist, Generations Trailcutter
Bottom shelf: Masterpiece Prowl, Masterpiece Streak, Generations Blurr, ToyWorld Trace, ToyWorld Aurora

Can you tell who it is the oldest figure on here? That’s right, it is Blurr. I believe he was released 2010. I dug him out recently for display because he’s such an awesome fig!

With the exception of Blurr, Breakdown, and FOC Shockwave, all figures on here were acquired in 2013.

4 figures are from third parties: MMC Bovis, Fans Toys Quakewave, ToyWorld Trace, and ToyWorld Aurora.

There are 3 Masterpiece figures: Acid Storm, Prowl, and Streak. Though one could certainly make a case for Quakewave. He’s a third party fig, but he fits into the MP toys just fine.

OK, time to make more room for the figs of 2014. Into the closets these will go. Transform and Roll Out.

Here is what I currently have on display.

Same pic, different angle.

From left to right
Top shelf, in alt mode: TFP Breakdown, TFP Silas Breakdown, TFP Beast Hunters Shockwave, Generations Blitzwing, TFP Dreadwing, Generations Megatron
Top shelf, in robot mode: Fans Toys Quakewave, MP Soundwave with Laserbeak
Middle shelf: Generations Bumblebee, Generations Springer, Generations Sandstorm, TFP Beast Hunters Optimus Prime, TFP Beast Hunters Ultra Magnus, Generations Trailcutter, Generations Orion Pax

Most of the Transformers in this group I would highly recommend. Each figure is a worthy purchase that any TransFan would be happy to include in his collection. The two Breakdown figures are some of the best to come out of the TF Prime line. MP Soundwave is considered by many to be the best MP figure ever made. Generations Springer and Sandstorm are nothing short of spectacular, and I dare argue that, for the first time ever, Hasbro has done triple changers right with these two. Trailcutter has finally arrived to the CHUG party, but better late than never. And for the first time in TF history, Hasbro made a Orion Pax figure. This figure is still a pretty rare find as of this writing.

Quakewave by Fans Toys is absolutely amazing! This is a 3rd party Shockwave homage that scales incredibly well with the MP line (check him out next to MP Soundwave). Construction of the figure is very solid, and the mechanical design of this toy is on par with any MPs that Hasbro and Takara has come up with. He looks good in both modes. Transformation is fun without being overly complex. Price is also reasonable at $150. The LED gimmicks (in both eye and cannon arm) are very cool.

The only two figures that may be debatable is Bumblebee and Blitzwing. Blitzwing has the shoulder-non-locking construction issue that all fans are aware of by now. And Bumblebee, despite being a brand new mold, feels too similar to past figures of the same character. But even with these flaws, I still recommend them. Blitzwing’s problems can be remedied with just a little bit of work. And if for some reason you don’t own any Movie-verse or TF Prime Bumblebees, then this new figure should feel very refreshing for you.

Some of these figs have been on the shelf for a while. They’ve had their 15 minutes, so back to the closets they go to make more room. I expect my next post like this to appear very different. Til then… Transform and Roll Out.

I don’t know why, but May 2013 seemed like a long month. Yes there are 31 days in the month, but it’s hard to imagine one extra day making a big difference (unless of course you talk to those in retail). More often than not, a month seems to fly by these days. Yet something about this past May feels different… can’t quite put my finger on it though.

And now I’m wondering if there are months on Cybertron. That’s an idea worth exploring. But on to more pressing business. These are my TF acquisitions for this May.

• Transformers Prime Beast Hunters Shockwave, Kmart, $21.99

• Transformers Prime Beast Hunters Optimus Prime, Walmart, $18.97

• Masterpiece Rumble and Jaguar (MP-15), hlj.com, about $35
• Masterpiece Frenzy and Buzzsaw (MP-16), hlj.com, about $35

• Generations Springer, Walmart, $22.99

• Transformers Prime Arms Micron Silas Breakdown (AM-24), amiami.com, about $50

• Transformers Prime Arms Micron Unicron (AM-19), amiami.com, about $65

• Transformers Prime Arms Micron Smokescreen (AM-26), amiami.com, about $13

All the above adds up to 10 figures for the month. 5 from TF Prime, 4 Masterpieces, and 1 Generations fig. Not a bad haul for May. Though only 2 of the figures were found in store by me (Shockwave and OP). The 4 MPs were online purchases. Springer, Silas Breakdown, Unicron, and Smokescreen were successfully located by my friend Gemini.

It should be noted I did not make a single TF purchase in the first half of May. So I was really beginning to think that this month would be like last month where I only got 1 TF. Then on May 17th I find Shockwave. On May 19th I decided to get BH Optimus. I’ve seen this figure plenty of times before, but was hoping to find him cheaper. I got sick of waiting so on this day I bought it. Then the MP figs show up later that week from hlj. And on Memorial Day weekend, Gemini hands me all the TFs he found for me. All these figures bunched up toward the end to make May a good month for TFs.

As of this writing, I have only opened the three US figures. Shockwave is pretty cool, though some aspects of his construction could have been better. On my figure, the right arm keeps falling off at the shoulder. A little nail polish seems to fix the issue, but this shouldn’t have been a problem to begin with. I also don’t like the position of the ratchet increments on the hip joints. The beast armor is worthless. But other than these issues, he’s an excellent fig. Both modes look great, transformation is fun and easy, he’s plenty articulated, and the design and colors are pure Shockwave.

I highly recommend Beast Hunters Optimus, like all the other reviews I have seen. Both modes are awesome and I detect no construction issues. Articulation is superb, and the alt mode comes together well. The major complaint among the TF fandom about this figure (which I agree with) is the ugly head mold, but some 3rd party is coming out with a custom head which should address this. Some fans also gripe about the green windows and sword, but that doesn’t bug me too much.

Springer is pure awesomeness! All TransFans have nothing but praises for him. For this reason, I opened him with such a quickness that I forgot to take pics of him when he was still unopened in the box. I haven’t transformed him yet, but I’m totally digging the robot mode. For those that don’t know, this Springer is modeled after Nick Roche’s version from Last Stand of the Wreckers (a brilliant TF graphic novel BTW). Many fans already project this fig to be TF of the year. I’ll transform him soon and see how much I agree with that assessment, but that many fans can’t be wrong so I know I’ll be pleased to say the least.

As for the 7 Takara TFs, I plan to open them all.

In unrelated news, this past Sunday I attended Fanime 2013. In a earlier post I said I will cover the event, but I really didn’t take any pics this time, so I guess I won’t. This was the first anime con for me in several years. The big draw these days appear to be all the cos-players. I estimate between 30 to 40% of all attendees are in costume. Shopping doesn’t seem like it’s as big as before. Sales of anime DVDs and Blurays have really dwindled. I guess it’s a sign of the times.

BotCon 2013 is next month. I probably will not go, but you never know. Til next time, Transform and Roll Out.