One of the biggest differences between the US version of Generations Red Alert and the Japanese Henkei equivalent has to do with the color of Red Alert’s head. The Henkei figure has a red head, accurate to the G1 animated series and to the G1 toy. The US Generations figure, however, comes with a black head, same as Universe Sideswipe. So once again, fans on this side of the Pacific gets the less show accurate version. Personally I don’t think it’s a big issue, but many other G1 fans other than myself feels strongly against the mis-coloration.

And so my friend Gemini comes to the rescue (much like Red Alert himself). As a customizer he did an excellent job of painting Red Alert’s head red for me. While he was at it, he painted the gun silver. Check out pics below.

Customized and uncustomized version side by side.

With his good buddy Inferno.

I think a black head on Red Alert has a charm of its own, but as a G1-er I certainly appreciate a red-headed version. Now if only someone will make his G1 missile launcher…

Transform and Roll Out!

Once again I’m back home. In anticipation of the upcoming Encore reissue Constructicons, I decided to dig out my knock off Constructicons from back in the mid 80s. These are supposed to be knock offs of the original Diaclone toys, that’s why they’re red and yellow.

In alt form they’re in pretty good shape. I didn’t put the accessories on any of these since I think they look better without them.

In robot mode they began to show their age. Left arm on Mixmaster is broken so I left it at the side. Right leg on Hook is broken at the knee, though you can’t tell from the pic. They show some sticker wear but overall not too bad, unlike my G1 Combaticons where all the stickers are in bad shape. My favorite of these is Bonecrusher. I like his transformation the best. I got all the little guns that each of them have, but after 25+ years I can’t remember which gun goes to who so I didn’t bother.

Combined as the fearsome Devastator. They still hold up pretty well after all this time. Granted, it wasn’t that good to begin with since it’s KO, but after 25+ years this set feels about the same connection wise. Some attachments actually felt tighter than I remembered. KO Devastator is all colorful, kinda like movie Devastator.

Below is KO Devastator next to a genuine Diaclone Slag.

As a kid I treasured this set even though I knew they were KO. Nowadays I keep these around for a good laugh.

Transform and Roll Out!

Oh happy day! News broke that the G1 Devastator giftset will be re-released in the Encore line. This is finally my chance to get my hands on a complete set of the G1 Constructicons. Release is set for late 2011. MSRP will be around 10500 yen, roughly $130 US today.

I mentioned before that I am on a quest to acquire all the G1 Combiner teams. This brings me one step closer to that dream. Getting a complete G1 Devastator would have costed me an arm and a leg. Now that this set is on the horizon, I might get some of those custom Devastator parts by Crazy Devy. They’re not cheap though. Even at Botcon they were not being sold for any kind of discount. All the parts added together will easily surpass the cost of the giftset.

For the full story, click here.

In related news, the 3rd party Scavenger figure that I reported in my last post is now up for pre-order at your favorite online TF retailers (you know what they are). This product is being called Hercules Exgraver. I’m guessing Hercules is Devastator and Exgraver is Scavenger.

Here’s the pic I took at Botcon:

Another color image:

MSRP of this figure is right below $100. The obvious conclusion here is that this Devastator set will be $600, if they really make all 6. Am I hardcore enough to buy them? Only time will tell.

Dinobots and Constructicons were rivals in G1. At Voyager size, this Constructicons set will even give Masterpiece Grimlock a run for his money. “Prepare for Extermination!”

Constructicons… Transform and Roll Out!

I am back from BotCon 2011! General admission was on June 4th and 5th and I was there both days. Once again I went with my buddy Gemini. We couldn’t wait for BotCon 2011 since we had a blast in 2009, which was also in Pasadena. BotCon 2011 did not disappoint! Check out the pics below.

 

The Venue

 

Across the street from the convention center were parked fan customs of Ratchet and Bumblebee. Notice Ravage is on top of Ratchet. Very cool. Movie Ironhide and G1 Trailbreaker showed up later but I forgot to take pics.

 

Convention Displays

 

 

BotCon 2011 Exclusive Figures

 

I’m not sure what are the names for any of these figures. Also, I had a chance to take pics of the exclusive Animated Stunticons, but forgot to.

 

Hall of Fame

 

 

Upcoming Third Party Figures

 

FansProject is working on an add-on for G2 Optimus to make it look more G2, similar to the add-on for Classic Ultra Magnus and Rodimus. This is shaping up nicely. Word is, there will be 2 versions, one for Prime and a black repaint for Scourge. I’m getting this for sure!

Another shot of the same product from different angle. Also includes a shot of the clear Rodimus add-on.

These are the upcoming FansProject Insecticons! In color for the first time! Really, really looking forward to these. All 3 are required purchase for me.

Masterpiece Ramjet by iGear, or “Jet”. TF Source was selling these for $130 on Sunday. These were available to be touched. The quality is not too shabby, feels like real MPs by Hasbro. Now if they were only about half price I would’ve bought one.

Other Masterpiece Seekers by iGear: Thrust, Dirge, and Sunstorm. Can’t remember what iGear calls them. I’m guessing they will also be around $130 per.

Apparently, iGear is making their own interpretations of G1 Ratchet and Ironhide. Right now its pics only and no prototype displays. These are looking promising. No word on what the price will be.

Sonicron by BTS Toys. This may be released already. No mystery who this is supposed to be. I may get one if it gets good reviews and the price is acceptable.

Scavenger figure, I think by TFClub. He appears to be Voyager size. Pics in the back does show other figs and they will combine. We talked to the guy manning the booth. He has confirmed that 3 of the Constructicons will be released, but at this point there’s no word on the other 3. He also places the price point at about $100 per fig after shipping. Details are so sketchy on this right now. At Voyager size, this Devastator would be so impressive combined. But it would totally suck if they made 3 and then stopped.

The above 2 pics are not 3rd party products. They are repainted customs being offered by this one booth. Nowhere else to put these pics so I lumped them here. You can see the guy that does these in the upper pic. He’s got impressive skills to say the least.

 

Contest Entries

 

There were many entries. I only took pics of the ones that grabbed my attention.

This last pic above, that was the winner.

 

Kre-O

 

When I first learned of Kre-O, I was thrilled. I loved Legos when I was a kid and I built TFs out of them. However, I think I read somewhere that these sets will NOT transform. What these sets offer is to build one mode, take it apart, and build the other mode. That kinda takes the fun out of Transformers. Quality of the bricks could also be an issue. Many have attempted to copy Legos, but none have reproduced the quality (I’m looking at you, Mega Blocks). I’ll read up on some reviews before I get these.

 

Cosplayers

 

I only managed to snap 2 pics of Cosplayers. I saw many others but were too lazy to take pics. Some were real creative. Definitely better Cosplaying at this Con than the 09 Con.

This Movie Starscream has got to be the best TF cosplaying I’ve ever seen!

 

Current and Upcoming Hasbro Figures

 

All store exclusives in this pic. I already got the Prime and Comettor 2-pack. Will also get Leadfoot and the Terradive repaint. Undecided about the rest.

More store exclusives. I have the blue Sideswipe repaint.

Definitely getting US version of MP Rodimus, even though I already have the Japanese version. US version will include the Targetmaster figure, and I’m hoping the flaws are corrected, like the Japanese 2nd release.

Here’s my chance to get Unicron! He will retail for $59.99. Looks like he’s got a more Movie accurate head mold too.

Current Reveal the Shield figs. I’ve got the bottom row. Still trying to find Grapple.

I’ve got all of these, except Mindset and Fallback. Amazon was selling Wreck-Gar for $14.99 right before BotCon started. I wasted no time buying one. They are all sold out now, I should have bought more. I’ll post about this later.

I now have Windcharger and Chopsaw (see Haul section below). I like to get the G1 legends figs. I haven’t seen them anywhere, other than BotCon. Not gonna pay the markup that the dealers ask though.

Some Power Core Combiners on the top row. I’ve got all the Generations figs in the bottom row.

DOTM Scouts. So far I’ve only bought Sandstorm. The new ones are on the bottom row. Some of these have potential to be good.

More DOTM toys. Top row are the Human Alliance figs. I’ve bought Roadbuster. Haven’t opened him yet, but he’s looking good. More scouts on the bottom row.

Optimus Prime and Megatron from Transformers Prime. Really looking forward to these.

The other TF Prime figs. The Matrix packaging on the bottom will be a Comic-Con exclusive.

This is Ultimate Optimus Prime. It’s huge! Retail I believe is $89.99. I plan to get one.

DOTM Leader class figs. I’ve got Sentinel, and Bumblebee is available just about everywhere. Ironhide is looking promising.

DOTM Voyager figs. I have Shockwave and Skyhammer. Might get this Prime with the ax too.

More DOTM toys. I’ve got Prime and Megs at the bottom. Will also get Thundercracker when I see him. Some dealers already had him at BotCon.

 

My BotCon 2011 Haul

 

No trip to any anime/toy/comic convention is complete without acquiring some loot. And so I proudly present my acquisitions from BotCon 2011:

• Windcharger, Chopsaw, Breacher, Sunspot, Firetrap, Backfire – These were purchased as a set of 6 for $48 at the Hasbro booth. That comes to $8 per fig. Hardcore fans will tell you that the prize here is Windcharger. And that was pretty much the reason I bought the set. Most dealers ask $40+ for just Windcharger, so I figure $48 bucks for 6 figs is not too bad. Hasbro knows how to milk it though, this is one way to rid figs that don’t sell. I’ve seen the other 5 figs go for $5 sometimes. But anyway, Breacher was new when I bought him, I just forgot to take the pic. I’ve also opened Sunspot and I checked out Gemini’s Windcharger. All 3 are good figs, so I don’t regret buying this set at all.
• TF United Megatron – I have the first Classic Megatron released in the US, back in 2006. However, I don’t like his Nerfy colors and I’ve always wanted one that was more G1. In the 09 Con, I thought about buying the Henkei version for $50, but in the end decided not to. On Saturday when we lined up to get into the Con, we saw a Devastator costume with a Henkei Meg attached to the shoulder. This gave me the idea to re-look for either a Henkei Meg or a United Meg. One booth had many United Megs for $50. I made an offer for $45 and the guy agreed. I now finally have a G1 looking Meg in the Classics-verse.
• Beast Wars Complete DVD Set by Shout! Factory – Beast Wars is a great series, in my opinion only 2nd to G1. Gemini introduced me to the show, and I watched all 3 seasons on his Rhino DVDs. I wanted my own set for some time now. Rhino Beast Wars DVDs went OOP for a while so the price was all marked up. News broke of a Shout! Factory version some months ago. I have their G1 Matrix of Leadership set and that was great, so I expect the Beast Wars set to be great as well. As of this writing, I don’t even see this set listed on Amazon, only the Season 1 set. So I’m happy to get one so early at $45 for the complete series.
• Encore Sky Lynx – I know, I mentioned before how I think Sky Lynx is one of the lamest Transformers ever. But the deal I see at BotCon was just too irresistible for a G1 guy. One dealer only asked $35 to get rid of these. There were about 10 units when I first saw the deal. I didn’t get one right away because I was still considering if I really wanted one. I came back 20 min later and only one was left! You can’t really see it in the pic, but the top right corner is kinda messed up. So I offered $30 and the seller took it. $30 for Sky Lynx is not bad at all. I’ll open him later and check out the walking action.
• Obi-Wan Transformer – Got him new for $8. This looks like the Ep 2 Jedi Starfighter. He’s only worth about $8. Not recommended at MSRP.
• Kre-O Optimus Prime figure – This I got free from the Kre-O booth. This is supposedly a convention exclusive. Some dealers were buying these at $5.

All pics below.

So that about wraps it up, my experience at BotCon 2011. I had a great time and I’m certainly looking forward to more. Chances are, BotCon will not be back in Pasadena next year. I was lucky to have it close to me in 09, and so soon again this year. Depending on where they have it next year, I might consider traveling, but that’s a post for another time. For now, I’m looking forward to the third movie.

I do have a small gripe about this year’s Con, and it’s that you have to buy tickets on each day. In 09 I bought tickets for both days on Sat. I wonder why they made this change. However, I do want to point out that there were no lines at all to buy the tickets on Sunday, so it’s not a big issue.

I want to take this opportunity to thank the BotCon organizers for making this such a great event. Long live Transformers and long live BotCon! Until All Are One… Transform and Roll Out!

BotCon 2011 is this coming weekend! I’m so stoked! It officially starts tomorrow, but I will only be there for General Admission which is Saturday and Sunday. I can’t wait for all the robots and the TransFans. Pasadena Convention Center is a great venue for the event. I will be doing some serious shopping. I need to make a list of figures that I’m looking for so I don’t miss anything. I might attend some panels. In the 09 Con on Sunday, Tyrese made a surprise visit! Who knows what surprises Hasbro has in stored for us.

Below I have some previous posts mentioning BotCon on this blog:
BotCon 2011
BotCon 2009 Pics Part 1
BotCon 2009 Pics Part 2
BotCon 2009 Pics Part 3

I will be sure to post pics from BotCon 2011 in a later post. TransFans, heed the call! Transform and Roll Out… for BotCon!

Last month I made an order from TFSource.com. The order was shipped through Fedex. I’m not the biggest fan of Fedex and this recent order has further reaffirmed that sentiment. I’ll spare you all the details of everything that went wrong with this shipment, but this afternoon it finally arrived. Every item in my order appears to be intact. Here’s what I got:

• Predaking 2010 Reissue Boxed Set by Takara
• BTS-03 G1 Prime Matrix of Leadership Upgrade Set by BTSToys
• TFX-04 Protector Trailer by FansProject
• TFX-05 Sidearm by FansProject

They shipped this in a pretty big box, though its not the biggest box I’ve received for ordering collectibles. Here’s a pic next to a soda can for size comparison.

TFSource is known for packing their items well and I would have to agree.

All items are brand new, but to save money I bought all C9 versions. As far as I can tell, the boxes for TFX-04, TFX-05, and BTS-03 all seem perfect. However, the box for the Predaking set is flawed. Below is a pic.

Notice the side of the box is kinda pushed out. There is a piece of tape holding the side panel in place. The tape looks factory to me, but I really don’t know. Not sure if a C10 would be better, and I’m not sure if Takara boxed them up bad or if TFSource messed with it. But regardless, I’m not too concerned since I plan on opening this set. I’m cool as long as there are no issues with the figures. As a kid I dreamed of owning the Predacons. In my youth, there was no way my parents would’ve bought me all 5 Predacons, and my allowance was next to nothing. There was a reissue set in 2005. This was around the time I got back into TFs. Most dealers asked between $150 to $200 for the set. That amount can seem like a lot when you’ve just started to buy TFS. So I hesitated, and before I knew it they were all sold out. 6 years and 350 TFs later, I’m now kinda desensitized to TF spending and I didn’t even blink when I chose to buy it this time. In retrospect I’m glad I didn’t buy the 2005 set, because I hear the 2010 set has die-cast and the 2005 set does not.

I am on a mission to have all the G1 Combiner sets. The figures could be G1 or reissue. I now have 4 Combiner teams complete: Combaticons (G1), Technobots (G1), Seacons (reissue), and now Predacons (reissue). I have some other figures of various teams from G1: Air Raid, Breakdown, Dragstrip, Dead End, and Seawing. Dead End is missing all accessories, and Seawing is kinda unnecessary since I got the complete Seacon set as a reissue. I’ll be looking for other Combiner figures, and I’m hoping Hasbro/Takara would do more reissues.

I’m looking forward to opening the other items as well. Actually, I already opened BTS-03 and I’m really liking this upgrade set. I like it so much I may review it in a future post. And I’ve heard nothing but good things about the Protector armor and Sidearm, so it’s a pretty sure bet I will be impressed with those.

As a sidebar, this is my 100th post on this blog. I’ve been enjoying the experience and I will keep this blog going for as long as I can. Long Live TFs! Transform and Roll Out!

Here is a quick review of Generations Thundercracker. Much like the quick review for Generations Dirge, I’m just gonna point out some differences between the recently mass-released Generations Thundercracker and the semi-limited Henkei Thundercracker. I think all TransFans who are even remotely interested in Classics-verse figures are already familiar with this mold, so there’s no need for me to go in-depth.

As far as I know, the Generations figure is the third Thundercracker released in the Classics-verse. The first one was a Botcon 2007 exclusive (released with exclusives of Thurst and Dirge) and it was extremely limited. The second one produced was the Japanese only Henkei version. The price of the Henkei was more reasonable, but the figure still had a limited status so it wasn’t cheap either. I bought mine for about $60 to $70 at Botcon 2009 from BBTS so I could complete my Seeker squadron.

TransFans who bought Henkei Thundercracker will tell you that, construction wise, this is the worst figure produced by Hasbro/Takara of all the CHUG Seekers. The joints on this figure is way too loose. In jet mode its not too bad since everything comes together as one, but in robot mode the problems become obvious. The leg/hip joints swivel way too easily. The back wings do not stay up. And worst of all, the cannons do not stay on the arms! Seriously, shaking the figure just a little in robot mode, and the cannons come right off. Either the pegs are too small or the holes on the arms are too big. Many fans have resorted to buying the KO version of this figure even after they got the Henkei, simply because the KO version is better built. At one time I thought about buying the KO also. But then I kinda forgot, and before I knew it Hasbro announced they will be doing a mass release Thundercracker in the US in the Generations line. I got mine for about $12 and received it early this month. I’m happy to report that Generations Thundercracker have no quality issues. This is the figure to get. But there are paint and color variations between the two. Below I point out some key differences.

JET MODE:

• Generations is a darker shade of blue. I think Generations is more G1 accurate to the toy. More on this later.
• Generations has the nosecone painted black which is accurate to the G1 toy. Nosecone on Henkei is blue and that’s G1 accurate to the show. No preference from me here.
• The Decepticon symbols on the Generations fig have the crown towards the rear, while Henkei has it in the opposite orientation. I like the orientation on Generations better because when you transform into robot, the symbol will be right side up. Generations also has a silver outline around the symbols so they look better. Generations wins here.
• The red and white stripes on the wings and tail fins are slightly different. See the pics above. They both look good.
• Henkei has a small Decepticon symbol on the nosecone and Generations does not.

Check out the pic above with the 2 CHUG figures next to a G1-reissue. I know it’s hard to tell from this pic, but it looks to me like the blue on the Generations fig matches closer to G1.

ROBOT MODE:

• Henkei has chrome on the guns while Generations does not. This is about the only thing that is hands down better on the Henkei.
• Shoulder stripes on Generations are painted red while on Henkei they’re painted white.
• There’s a little bit of red painted near the waist on Generations. The same area on Henkei only has the base blue color.
• On the legs of the Henkei, there are panels near the knees that are painted silver and black. This same area on Generations is unpainted.
• Pattern on the shoulder/intake are different. Generations has little triangles painted red. Henkei has the base design painted black.
• I didn’t take a pic of this, but Henkei also has Decepticon symbols on the back of the wings (wing underside in jet mode). Generations does not.
• The launchers on Generations are mostly black. Henkei launchers are mostly blue.
• In the chest area near the cockpit, Generations is colored silver. The same area on Henkei is colored blue.
• There is a small Decepticon symbol on the chest of the Generations. Henkei does not have this.

One last thing that I wanted to point out are the missile launchers. On the Henkei, the missile shoots farther, but its kinda hard to press the button. Sometimes it feels like its stuck. With Generations, the missiles don’t fly as far, but pressing down on the button is not an issue.

Below is a pic of all my opened Thundercracker figures.

From left to right: Generations, Titanium, Henkei, Movie

In conclusion, I definitely recommend buying Generations over Henkei. It’s way cheaper and way better built. Only buy the Henkei if you must have that particular Thundercracker color scheme. Back in 2009, I had a feeling Hasbro would eventually mass produce Thundercracker, but wasn’t 100% certain so I bought a Henkei anyway. I should have more faith in my own TF instincts.

This reminds me, I still need to buy a MP Thundercracker. I’m hoping Hasbro will do one here in the US like they did Starscream and Skywarp (both Walmart exclusives). Transform and Roll Out!

In my last post I mentioned I made an order from Hasbrotoyshop for Wheeljack, Thundercracker, and Lugnut. The two deluxe figures were shipped out first, and Lugnut was shipped out about four days later. Weird that they all arrived on the same day. Here are some pics.

I’ll be back with my thoughts later. Transform and Roll Out!

It is now the end of March. Looking back, this has been a very productive month as far as hunting for new TFs. I will show here what I got this month, in the order that I found them.

Highbrow

Highbrow is a voyager figure that has been released for some time now. If I’m not mistaken, he is released under The Hunt For Decepticons subline. Right before Halloween of 2010, I met up with a dude from Craigslist to buy Armada Starscream from him. At that time he told me there has been sightings of Highbrow at the local Target. Other sightings on Seibertron does confirm that this figure has been released. So I’ve been keeping my eyes open, and almost 5 months later, I find one around mid March in said Target. To this day I’ve only seen one Highbrow. He’s hard to find in my area. I forgot to take pics of him in the box, so here he is in robot mode.

Highbrow is ok in robot mode, but his alt mode is where he really shines. I can’t think of any other TF that has a WWII plane has his alt mode. The plane is well constructed, has plenty of detail, is very robust, and simply looks awesome. The spinning propeller gimmick is also a nice touch. For a pic of the alt mode, check out my last post where he appears in a group shot.

Kup and Scourge

Around the middle of the month, the GF and I had sushi near her place. There was a TRU nearby so naturally I suggested we stop and take a look. This TRU is located in a really crowded shopping center on a major avenue in the heart of Silicon Valley. Navigating around the parking lot was next to impossible with all the cars trying to get in and out. When I finally parked, I complained to her that we’re not coming back unless I find something. As it turns out, I found Kup and Scourge here. So I guess we’ll be going back.

I opened both of these and they are awesome figures. Kup as a pickup is a great update for 2011. The alt mode is solid and the robot mode more resembles how he looks in the G1 Movie. Scourge in this form is way less of a shell-former. Oh btw, he his NOT a Targetmaster. I always assumed he is because of how the gun looks and the fact that Universe Cyclonus is the Targetmaster version. The gun does Transform like Targetmaster figs, but it is so he can use them as twin pistols or one larger rifle. This kinda reminds me of the Double Targetmasters in G1, except the guns do not transform into figures. I highly recommend both Kup and Scourge.

G2 Laser Optimus Prime

The following day I went to Target to buy some everyday supplies. This is a different Target from the one where I found Highbrow (I got a bunch of Targets near me). If I’m at any store that sells TFs I’ll be sure to stop by and check it out (more on this later). On this trip I found G2 Laser Optimus Prime in the Reveal the Shield line.

I opened this figure as well. Overall he’s not too bad, but he does have some flaws. I like the robot mode. The mechanism of the wheel transformation is not too intuitive. In fact I already broke off some tabs trying to figure it out. Also, in alt mode it is hard to store the sword where it’s supposed to go. I can’t recommend this Prime as highly as the 3 figures above.

Wheeljack, Thundercracker, Lugnut

About two weeks later, I made an order from HasbroToyShop.com for Wheeljack, Thundercracker, and Lugnut. I saw that they were available and in stock, so I went ahead and bought them. I think I already mentioned repeatedly that I bought Jazz and Tracks from HTS around Christmas and I didn’t see them in stores til about 3 months later. I have a feeling the same thing will happen again for these 3 figures. I don’t feel like waiting for 3 months to get them, so I made the order. I don’t have them in hand yet, so no pics to show. But I’ll be sure to do that for a later post.

Perceptor

After work in that same day, I went back to the shopping center of the Target where I found Prime for a haircut. Since Target is right next door, I stopped by real quick to check it out. I’m glad I did because I found Perceptor.

I still have not opened Perceptor, but I plan to real soon.

I mentioned earlier in this post I will stop by the TF section of any store that sells TFs. This includes even clothing stores! For instance, earlier this week I was at Kohl’s. For those that don’t know, they do have a toy section and they carry TFs. They generally put it all the way in the back. Anyway, I found a whole bunch of Reveal the Shield Special Ops Jazz at Kohl’s! They had like 5. Before the Kohl’s visit, I only saw him twice at different Targets, and only 1 each. So how did Kohl’s get 5?! I can’t explain it. Either Hasbro has a really weird distribution system, or there are way too many TF hunters out there camping out at the Targets and Walmarts and TRUs that as soon as some new figs come in, they hunters snatch them. I didn’t see anything I needed on this visit. However, I should point out that Kohl’s sell the deluxes at $14.99 each. Ouch! But regardless, I think I will make Kohl’s a regular hunting spot from now on.

Well, that’s it for March. I don’t plan on hunting for TFs today (but you never know, hehe). NCAA March Madness is coming to a close with only 4 schools left, and it feels like I’ve had a March Madness of my own in getting all these TFs. I already have plans for some more TFs in April, so the Madness will continue. I might do full reviews of some of the figures here. Transform and Roll Out!

Happy St Patrick’s Day everyone! To honor this holiday I decided to take pics of my green color Transformers. I didn’t think there would be that many green robots, but after looking through my TF List, there turned out to be more than I thought.

Below are the TFs that would never get pinched on St Patrick’s Day. I know this post is dated 3/18, but that’s only because I left my time zone settings at default on WordPress, which is like 7 hours ahead of Pacific Time. Here in California it is still 3/17.

 

The Autobots
Bottom row: Animated Bulkhead. Middle row (left to right): Movie Ratchet, G1 Hoist, Movie Highbrow, Movie Dune Runner, Alternator Hound. Top row (left to right): Universe Air Raid, Botcon Springer, Warbot Defender, Universe Hound.

 

The Decepticons
Front row (left to right): Movie Hailstorm, Robots in Disguise Rollbar, Movie Brawl, Movie Bludgeon, Universe Brawl. Top row (left to right): Robots in Disguise Mega-Octane, Animated Oil Slick, Animated Waspinator, Universe Acid Storm.

 

Today was also the start of March Madness. This is my favorite weekend as far as sports go. 16 games today, 16 more tomorrow, and 16 more over the weekend… I can barely contain myself!

There were some very close college basketball games today. I did my undergrad at UCLA so of course I was happy to see them beat Michigan St. UCLA was up by 23 points with about 8 minutes left in the game, so naturally I thought this one was all wrapped up. But by a weird combination of the Spartans making 3s and getting offensive rebounds and the Bruins not making their free throws, Michigan St. made of game of it down the stretch. In the end UCLA barely survived 78-76. I’m happy for the win, but the Bruins can’t continue this kind of sloppy play if they hope to have any kind of chance against Florida next round (who knocked them out of both 06 and 07 tournaments).

Go UCLA! Bruins… Transform and Roll Out!