June of 2015 is Robots in Disguise month! Check out all the RiD figs below. There are some third party items here too.

• Robots in Disguise Optimus Prime, Walmart, $14.97

• Robots in Disguise Drift, amazon.com, $12.80

• Robots in Disguise Jazz, Target, $14.99

• Perfect Effect Perfect Combiner PC-02 Upgrade Set, tfsource.com, $32.99

• Before & After Alpha Launcher for MP-18 Bluestreak, tfsource.com, $14.95

• ToyWorld Grimshell (Corelock), tfsource.com, $149.95

Before this month, I only bought one RiD figure. That was Grimlock from back in January. I was not terribly impressed with RiD Grimlock. So you might be wondering why I bought all these RiD figs here. Truth be told, I only bought them because there wasn’t a whole lot of other TFs on the shelves. Combiner Wars was in a slight retail pause, and my 3rd party orders haven’t come in yet. But I’m glad I got the RiD figs here. Drift is a great one. If you can only get one RiD fig here, get Drift. Both modes are good, transformation is fun, and build construction of the toy is solid. I love his twin swords. Jazz is a nice one too. I don’t know if I’m feeling that spear/gun weapon, but the figure itself is a worthy addition to Jazz. The Optimus Prime figure is not great, but not bad. There’s some fun stuff going on here, but overall he’s too simple and too small. It’s kind of the same gripes that I have for Grimlock. Though Grimlock is getting (or has gotten) a bigger, beefier version for the collectors. I hope OP gets the same treatment.

Now onto those 3rd party accessories. Perfect Combiner PC-02 Upgrade Set is meant to enhance Combiner Wars Menasor. I got some picks from back in this post. Most fans seem to be gushing over these sets, which is why I got them. I don’t know. I think they’re ok, but in my opinion they don’t add that much to the combined form. Maybe I’m expecting too much. Alpha Launcher for MP-18 Bluestreak by Before & After is an excellent upgrade! I got one pic below that shows it off. I like how the MP toy designers incorporated launchers as part of the transformation. But they are more reflective of Bluestreak’s cartoon look, and they look a tad small. With these Alpha Launchers, Bluestreak now has the firepower to be the true gunner that he’s meant to be. This upgrade set also comes with decals for the MP that are much like the decals of the original G1 toy. I did’t put them on. But know that it’s an option for those that like their figures all decked out with decals.

I have written about ToyWorld Grimlock several times already. He’s officially listed as Grimshell on the box, but sometimes he is listed as Corelock on store sites. Anyway, I have raved on and on about this figure here and here. So I won’t repeat my G1 fanboy praises yet again. Just go read those.

Below is a group photo of the bunch (minus the upgrade set for Menasor).

Transform and Roll Out.

March of 2015 continues with more figures of Combiner Wars. Only 2 CW figs here, but they both happen to be trucks. This is what I call Truck Month (built Transformer tough).

• Combiner Wars Huffer, amazon.com, $10.99

• Combiner Wars Motormaster, hasbrotoyshop.com, $21.79

Huffer is a character that I never cared for while growing up. He’s a total whiner, and is quick to point out the absurdities of any situation. Why Optimus chose him to be one of the original 18 Autobots aboard the Ark is beyond me. Still, Huffer has been around all this time, so it’s finally good to have a figure of him in my CHUG line. In fact, not counting this Power Core Combiners Huffer, this is my only Huffer figure. This fig is a repaint of Generations Thrilling 30 Optimus Prime, so I won’t mention it too much. I know, Huffer gets no love. Hasbro only sees fit to produce Huffer figures when they’re convenient repaints.

Motormaster IS a character I cared for while growing up. Being the leader of the bad-ass Stunticons, you can’t help but like him. He forms the body of the mighty Menasor. I believe this is the first time after G1 Hasbro has made a Motormaster that can combine with other figures to form Menasor. I already talked about how this figure is individually with the Optimus Prime repaint in a previous post. Some differences for Motormaster include the colors, a different head mold, and he comes with sword weapons instead of the Optimus guns. In combined mode, this figure also has the problem with hips that I mentioned before. With Optimus, I didn’t really care that he has the problem, because Optimus is not usually a combiner. But with Motormaster, I see this as a big problem. Also, Blackjack (a CW legend size figure that will come later) is supposed to fit onto Menasor’s chest. The connection for Blackjack is very poorly fitted. As a result, Blackjack does not combine that well. I’ll mention this again when I go into Blackjack. But overall, I like Motormaster in truck mode. In robot and combined forms, the figure suffers from the leg and hips issue. Hasbro will reproduce a fixed version of this figure much later. I will again re-visit this, when I present the fixed version of Motormaster.

This is the first time in a LONG time that I have made 4 posts in my blog in one month. Yay! Blogging back on track. Transform and Roll Out!

As promised, here are more pics of Transform Mission Menasor.

This is a new unknown company in a market where third party products are totally saturated. It remains to be seen if they can compete adequately with the current existing players. I am eager to see color pics of their products. I will of course post those pics as soon as they surface somewhere.

I am really hoping that Transform Mission will do the Stunticons justice. Don’t get me wrong. The existing offerings of our favorite Decepticon racers aren’t too shabby, but none of them are perfect. The FansProject Intimidator set is great in combined form, but I find issues with them individually. The limb pieces are small and too tough to transform for their size, while Diesel (Motormaster) is way too complicated to be any fun. The Hasbro Combiner Wars set has the opposite problem. They are fun to play with individually, but the combined form leaves much to be desired. I am hoping Transform Mission will rectify all these problems and give us the perfect Stunticons.

Transform and Roll Out.

A new company called Transform Mission is doing their version of Stunticons! Yes friends. Our favorite car combiner team from G1 is getting the Masterpiece treatment from a 3rd party.

Feast your optics on some pics below!

Breakdown

Dead End

Scale with MP Sideswipe

I will post more pics later… Transform and Roll Out.

It’s been a while since I did a post about what’s on my shelf. So I’m doing one today.

Same pic, different angle.

From left to right

Lower shelf: Thrilling 30 Rhinox, Thrilling 30 Rattrap, Mastermind Creations Felisaber

I especially like the three gestalts on the top shelf. Feral Rex and Giant have been featured elsewhere before in this blog so I won’t go into detail again. Combiner Wars Menasor is Hasbro’s official update of the Stunticons in combined form. Compared to Fans Project’s Intimidator, Menasor has it’s pros and cons. Individually I like the Hasbro figures better. They are larger, sturdier, easier to transform, and more fun to play with. However in combined form, FP has the better looking Menasor. Intimidator also stays together better than Combiner Wars Menasor, as the Hasbro figure feels like it could quickly fall apart. However I should point out that the Hasbro figures feel more like a true combiner. The leg components are not simply adding on top of Motormaster’s legs, like in FP’s offering.

Poor Rattrap and Rhinox. They are the only good guys here. Technically they are not Autobots, so I don’t have a single Autobot in this post. Decepticons forever!

Transform and Roll Out.

Earlier this year I bought a glass display case for all my TFs. I have a small shelf in my bedroom for such a purpose, but there are too many robots I want to display. So I got the Detolf case from Ikea.

It took some effort to put this case together. But in the end the display looks quite nice. Here is what I currently have displayed.

Here on the top shelf is a random collection of Autobots. On display is CHUG Sideswipe with the Beelzeboss Heroic Duo Custom Kit (v2) upgrade, MP Streak, MP Prowl (hiding in the back in alt mode), MP G2 Sideswipe, FansProject Smart Robin, TF Prime Voyager Ultra Magnus, and a Mega Bloks minifig from their Battleship line.

On the 2nd shelf is Maketoys Giant in the combined form, PCC Heavytread with Maketoys Mobine Armor Marine upgrade kit, Generations Thrilling 30 Dreadwing (hiding in the back in alt mode), and another Mega Bloks minifig from the same Battleship set (the GF insists I put these here).

Here on the 3rd shelf is my Wreckers team! I’m so glad Hasbro is taking the time to please us true fans, as most figures here are official products. On display here are Generations Thrilling 30 Springer, Sandstorm, Whirl, and Roadbuster. And from Mech Ideas are Apex and Geminus.

And here on the bottom shelf are some random stuff. FansProject Intimidator appears here in combined form. Other figures include a Samus Aran Figma, Nickelodeon TMNT Donatello riding a a Maisto motorcycle, and a Diarobo figure that transforms into a Japanese garbage truck. The teddy bear and shot glasses are random contributions from the GF.

I will probably rotate out the figures in here every so often, when I want some new stuff to look at. Til next time… Transform and Roll Out!

Continuing with the tradition of this blog, I will still document what I am buying each month. I am now back-posting what I bought per month since the start of 2014.

• Mastermind Creations Fortis, tfsource.com, $89.99

• Generations Thrilling 30 Dreading, Target, $17.99

• FansProject Diesel, tfsource.com, $119.95

I have opened all of these. Fortis (not Headstrong) is almost exactly like Bovis, which I was not expecting. I thought MMC would do more to distinguish between the 2 figures which forms the legs of Predaking. Dreadwing is a redeco of Generations Thrilling 30 Megatron. Only differences between these 2 figs are the paint job and the head mold.

Diesel (not Motormaster) is a complicated piece to say the least. He’s packaged in truck mode like you see in the pic above. In the pics below, I have him transformed to his robot mode, with and without armor.

And for course the real reason we hardcore collectors all get this figure is so we can form the mighty Intimidator (not Menasor)!

Intimidator looks totally kick-ass when combined! The limb components were bought in March and August of last year.

So that’s 3 figures for the month, two 3rd party figs and one generations figs. Not a bad way to start the new year.

Transform and Roll Out!

This week I will be receiving 2 figures from FansProject, T-Bone and Car Crash. These are obvious homages to G1 Stunticons. Growing up, this was the favorite combiner team for most of my friends. And for good reasons. They are all high-end sports cars (with the exception of Motormaster). They are all kick-ass rebels, even choosing to ignore Megatron’s orders from time to time. And Menasor could possibly be the most powerful combiner in G1. In the cartoons, I don’t remember him losing any fights to any of the other combined gestalts.

Since Hasbro will not give us proper CHUG remakes to this fan-favorite combiner team, it is once again up to FansProject to step up to the plate. I will be receiving T-Bone (Wildrider) and Car Crash (Breakdown) very soon, and I look forward to checking them out for myself. I’ll make another post when I get them, but for now, check out these pics below.

On completely unrelated news, March Madness 2013 is currently going on. I watched as many games as I could have starting this past Thursday. First 2 rounds are now over (I know, they renamed it Round 2 and 3, but these new names just don’t work for me) and we’re down to the Sweet 16 as I write this. The obvious Cinderella that is getting everyone’s attention is FGCU, or Florida Gulf Coast Univerisy, a 15 seed! Has a 15 seed ever made it to the Sweet 16? I honestly don’t know. They took down goliath Georgetown and up and coming San Diego St to get here. Safe to say that no one’s heard of FGCU til this weekend, not counting the locals. Congrats to the Eagles!

But on a more personal note, my bracket is still in good shape! For my Final Four, I picked Louisville, Ohio St, Florida, and Indiana. All 4 schools are still alive in the tournament. I can’t even remember the last time I did this well. Last year, I picked Missouri to win it all and they were bounced in the 1st Round! The year before that, I can’t remember who I picked, but I remember not doing too well. The thing that sticks out from that year is UCLA winning in Round 1 against Michigan St, but then losing to Florida in Round 2. I remember following the scores on my phone for that Florida game. The Ex wanted to go to Whole Foods so we did. I let her do her thing while I just followed the game on my phone. UCLA did even worse this year by making a Round 1 Exit. That hurts my Bruin pride, but I didn’t project them to go far anyway, since Florida was waiting for them in Round 2. And besides, I got a real shot at winning the office pool. Currently I’m in 2nd place, but I have the most potential points left. I won’t say what is my pick to win it all in fear of jinxing it, but right now they sure look like the team to beat.

Long live March Madness! Transform and Roll Out!