Archive

Posts Tagged ‘Brawn’

Transformers Rub On Faction Decals, More Pics ++

March 31st, 2022 Comments off

Today I am going to show off even more of my 3rd party TFs using these awesome decals.

Fans Toys Grenadier – clear backing
 

Fans Toys Hunk – clear backing
 

MakeToys Downbeat – white backing
 

A quick word about Hunk – I’m not sure why the contrast between the decal and chest is so bad on the pic. Must be bad lighting. The contrast of the red decal against the light orange chest is much more evident when looking at the fig in person. Here is a review of Hunk – see the pics there.

Links to previous decals:

Transform and Roll Out.

 

Categories: Pics

Fans Toys Hunk Quick Review

September 24th, 2020 Comments off

I first featured Fans Toys Hunk in this post. FT’s version of MP Brawn is getting his 15 minutes today.

He’s packed in robot mode, so let’s start there.

Hunk in classic A-stance.

View from the side. A bit of backpack kibble, but not too bad.

Back view.

Close up of the face. That’s a great sculpt. Good job FT.

Overall I’m very happy with Hunk’s robot mode appearance. This is a robot mode that does Brawn justice. I can nitpick here and there, but I don’t think there is a figure in existence that comes closer to how Brawn look in the G1 cartoons. The face is spot on. The colors are spot on. Brawn is stockier in the animation, so you might say Hunk’s proportions are a bit too slim. But I like it.

Here we see Hunk with his trademark pistol that the G1 animators created for him. As far as I can tell, this gun resembles the cartoon weapon fairly well. Hunk only comes with three accessories: this gun, another face of Hunk yelling (not pictured in this review), and a drill bit he uses in vehicle (more on this later).

Hunk in action.

Hunk celebrating.

Hunk standing around looking cool.

The articulation in robot mode is ok, but some may find it too limiting. The arms are not bad. Shoulder, elbow, and wrist rotations are all there. The legs ain’t too shabby either. Hip swivel, knee bend, and ankle pivots are all accounted for. Head rotation is very limited. There is no up and down, and side to side is extremely limited due to the back flap behind Hunk’s head. I’ve seen pics of Hunk with waist swivel, but I could not get the waist to twist. If possible, it’s really hard to do. I didn’t try it too hard in fear of breaking the toy. All the official FT pics don’t show Hunk with any waist swivel. There’s no ab crunch of any kind.

Here is Hunk next to the famous MP-10 Optimus Prime. They scale together pretty well.

When I took this pic, I had Hunk in one hand and the MP-10 in the other. To my surprise, Hunk weighs more! This is the US Version of the MP-10, and it’s unclear to me if the Japanese version uses any die-cast. But to have Hunk weigh more than the Hasbro MP-10 is still a testament to the fact that FT uses some quality materials. Bravo.

I detect no weaknesses in Hunk’s construction. All joints are at the right tolerance, nothing too loose or too tight.

As far as the robot mode’s appearance, I have next to no gripes. At first I thought the feet looked weird, in that they’re too big and they’re the wrong shape. But then I checked the G1 animation model and the comic book model, and that’s exactly how they look (especially in the US Marvel comics). So again, props to Fans Toys for being so toon accurate, something they never fail to do. I already mentioned about the size of the backpack when viewed from the side. Yes it’s not perfect, but easily forgivable considering how well everything else looks.

Transformation to vehicle mode is more on the complex side for a figure of this size. He’s not impossible like FT Rouge, but he’s also not simple like FT’s earlier offerings (Stomp, Soar, Sever, etc).

The leg transformation deserves special mention. Each leg splits apart, and ends up forming the sides of the vehicle. It sounds hokey on paper, but seeing this transformation implemented in action is kind of cool. G1 purists will bash this for being an unfaithful transformation, but that would fall into the area of hardcore nitpicking.

Going to alt mode, getting the backpack to be formed properly as the vehicle’s top rear section can be a bit frustrating. It takes perfect alignment for the whole assembly to snap into place. There are also a bunch of small transformation pieces on both the waist and legs that, in my opinion, detract from the overall enjoyment of the transformation process.

Hunk looks good in alt mode once the transformation is complete. Check the pics below.

Super accurate alt mode to the cartoon.

Another angle. Hunk comes with rubber tires and rolls well on a flat surface.

Side view.

Front view.

Back view. They did not forget the gas canister.

Bottom view. Notice there is storage for the weapon. Nice.

Here we see Hunk using that alt mode drill that Brawn used in The Ultimate Doom. I see this more as a novelty accessory, but kudos to FT for including it.

Another shot of the drill.

Now for some alt mode size comparisons. Here he is next to MP Bumblebee.

Now next to MP Sideswipe.

Next to both of them. For a mini-bot Hunk does seem a bit big in alt mode. But seeing as he is a Jeep off-road type of vehicle, I think it works.

Hunk is definitely a worthy purchase for your Masterpiece collection. Most of my gripes are transformation related. I think he’s more complicated than he needs to be. Fan of intricate articulation may also find Hunk a bit lacking in this regard. But this figure scores high in all other areas. I recommend Hunk with no reservation. The only other Masterpiece style Brawn that I’m aware of is Bad Cube Brawny. I don’t have that figure. I’m told Brawny is good too, but comes with a very punishing transformation process that is not for the faint of heart.

On a completely separate but related note, this marks my third review of a Brawn figure. The other two are my reviews for Revenge of the Fallen Brawn and Titans Return Brawn. Why am I reviewing so many Brawns? Is he subconsciously my favorite character? Probably not. I hope not.

Transform and Roll Out.
 

Categories: Pics, Toy Reviews

Masterpiece Optimus Prime and Autobots, Team 5

August 27th, 2020 Comments off

MP Optimus is back with another team of trusted Autobots to lay waste to some undisciplined Decepticons up to no good.

This is Team 5. Here were the previous teams: Team 1, Team 2, Team 3, Team 4.

With the exception of MP-10 Optimus, all figures here are 3rd party and purchased within the last year. This really shows how far 3rd parties have come.

Fans Toys got 2 representatives here in Hunk and Sheridan. Hunk is a great figure, possibly the best MP Brawn on the market today. Both modes look toon accurate. Transformation to car mode can be a tad frustrating in the final steps. I have yet to transform Sheridan, but he definitely looks good in robot mode.

X-Transbots have undoubtedly improved their status as a 3rd party company of transforming figures in recent years. I’m generally very impressed with their offerings, and I got 3 here to prove it. I chose Neptune after looking through many choices in 3P MPs of Seaspray. He is in my opinion the best MP Seaspray on the market, in terms of cartoon accuracy and figure engineering. (Sidebar: the upcoming Spindrift 2.0 by Fans Toys may change that, but only time will tell.) Klaatu was also chosen among many 3P MP offerings of Cosmos. He looks the most toon accurate in both modes. I went with the metallic version, and I’m oh so glad I did. The picture here does not do this paint job justice, it has to be seen to be fully appreciated. Klaatu is a bit chunky in bot form, and he does present a bit of scale issues with other Mini-bots.

X-Transbots Aegis stars as MP Trailbreaker. In G1, Trailbreaker was my very first Carbot, so I’m extremely partial to Trailbreaker. He was the last Carbot to get any love in CHUG, something that I wasn’t entirely happy about. And now he is the last Carbot to appear in my Autobot MP Teams. I feel kinda bad about that. But better late than never, and in this case I could almost say I saved the best for last. XT Aegis is better than all previous attempts at an MP Trailbreaker. I won’t go into what those are, but if you are in the market for a MP Trailbreaker, you need only consider Aegis.

Transform and Roll Out.
 

Categories: Pics

Happy St Patrick’s Day 2019! Mean and Green Transformers

March 17th, 2019 Comments off

It is that time of year again! St Patrick’s day is upon us, and that means another feature of my green Transformers.

As a rule, I always use green TFs that I have not used in a previous St Patrick’s Day post. Every TF needs their 15 minutes. I actually found quite a few TFs to feature this year.

Back row standing, left to right:

Front row in alt mode, left to right”

  • War For Cybertron Siege Hound – excellent Hound figure from the Siege line
  • Combiner Wars Hound – not the best Hound, but ok
  • Studio Series World War II Bumblebee – interesting fig, but not that good
  • Titans Return Brawn – great modern update of Brawn
  • Titans Return Skullsmasher – modern update of Skullcruncher, ok fig with some construction issues
  • Robots in Disguise Grimlock – this is the voyager fig that I first saw in Shanghai; I bought later from Entertainment Earth, and quite frankly, he sucks; glad I did not pay high prices in Shanghai to get this

Unlike many previous years, March Madness has not started before this year’s St Patrick’s Day. In fact, the Selection Committee will release the bracket sometime today. UCLA will not be selected this year. Woe is me.

Here are links to previous St Patrick’s Day posts:

2018
2015
2013
2012
2011

Have a safe and happy St Patrick’s Day everyone. And let March Madness begin! Transform and Roll Out.

 

Categories: Pics

Transformers Purchased in May 2017

May 26th, 2018 Comments off

Repaints and more repaints! That is the theme this month. There were 7 TFs purchased in May of 2017, and 5 of them were repaints.

I never kept stats on how many repaints there are in a month, but I can’t remember one that was this high. 5 out of 7… that’s more than 70%. Hasbro is being plenty lazy here, but perhaps I’m the sucker for buying so many.

Below I proudly present the TFs where most of these molds has been previously used on a different figure.

  • Titans Return Blitzwing, Target, $24.99

  • Titans Return Octone, Target, $24.99

  • Titans Return Brawn, amazon.com, $9.99

  • Titans Return Roadburn, Toys R Us, $9.99

  • Robots in Disguise Skywarp, Walmart, $14.97

  • Masterpiece Megatron MP-36, amiami.com, ¥17280 (about $159.09)

  • Masterpiece Starscream MP-31, amiami.com, ¥9770 (about $89.95)

Blitzwing and Octone

Blitzwing needs no introduction. As perhaps the most famous Triple Changer in TF history, Blitzwing saw plenty of action in G1, including the G1 Movie. Even casual TransFans could identify both his alt modes: a MiG-25 jet fighter and a Type 74 battle tank. Titans Return Blitzwing is a repaint of Titans Return Megatron. Or to be more precise, Megatron is a “prepaint” of Blitzwing.

In my opinion, TR Blitzwing is way better than Generations 30 Blitzwing. I enjoy the transformation of TR Blitzwing. All 3 modes look pretty good, and it doesn’t have the famous construction issue that Gen 30 Blitzwing had.

It feels weird to write Octone. His name should really be Octane, the fuel truck and fuel jet Triple Changer that came about in G1 Season 3. Titans Return Optimus Prime is a prepaint of Octone.

In the early years of the Generations line, Hasbro released a deluxe version of Octane called Tankor. That figure was really not that good. TR Octone is leaps and bounds superior to Tankor. And just like Blitzwing, all 3 modes are pretty good. There isn’t one mode that is obviously inferior to the rest, like many other attempts at Triple Changers. I commend Hasbro for coming up with modern Triple Changers where all the modes are properly represented.

G1 purists will no doubt argue that Blitzwing and Octane were never Headmasters. They would be right, but I don’t think it’s such a big deal.

Hasbro did make enough mold changes to Blitzwing and Octone that buying these repaints feels a bit more justified. If you didn’t purchase TR Optimus or Megatron, then there is no reason to not buy these 2. But even if you did, I still recommend them. The molds here were always meant for these 2 characters. Sell off Prime and Megs and put Octone and Blitzwing in your collection if you have a no-repaint rule.

Brawn

Brawn is one figure that uses a brand new mold this month. I have a quick review for him here. He is most definitely recommended.

Roadburn

I don’t think there was a character named Roadburn in G1 (though it won’t surprise me if I’m wrong on this). Instead, I think this character is meant to be Chase, a member of the Throttlebots. Roadburn’s color scheme and head mold is a dead on for Chase. I have G1 Throttlebot Chase. I also have ToyWorld’s MP scale interpretation of Chase, called Trace. My Chase collection is now complete with the acquisition of Roadburn. This totally unknown character deserves his 15 minutes of fame. Maybe I will do a separate collection post dedicated to Chase.

Anyways, Roadburn is a repaint of Titans Return Bumblebee. Roadburn has a different head mold, but that’s the only mold difference. Read the post on Bumblebee for my thoughts on this figure. If Chase the character means something to you, then go ahead and get this figure. Otherwise it is a skip. This figure really doesn’t offer anything that hasn’t been done before.

It should also be noted that Roadburn is one of my last in-store Transformer purchase from Toys R Us before the giant toy chain went under in early 2018. I started to write about my thoughts on TRU here, but then it got so long I realized it should get its own post. So that’s what I’ll do. A “farewell to TRU” post is coming soon.

Skywarp

Robots in Disguise Skywarp is a figure I debated about buying. I saw him on the shelves in late April or early May and decided to skip it. He is an exact repaint of RiD Starscream, which I have. I like the figure, but it’s not worth buying again in a different color.

About a week or two goes by, and I gave in to my urges and bought Skywarp. I guess it’s because I like Skywarp the character, I like the figure in the black and purple color scheme, and there was really nothing else to buy (I was not counting on the two MP figs to arrive later in the month). Read the RiD Starscream post for a more detailed discussion about the figure. Skywarp is solid, but not a required purchase by any means.

Starscream

What can I say about MP Starscream that hasn’t already been said? The mold used for this figure has been around for so long and Takara is still abusing it. What I have here is the official 2017 re-issue of MP-11. I’m fortunate enough that my Starscream doesn’t seem too bad, but it comes as no surprise that many fans report inferior construction quality with this figure (loose joints, weak tabs, etc).

I got this re-issue because, up until this point, I don’t have the famous Decepticon Aerial Commander in the newer MP Seeker mold. I have MP-3 Starscream, but that was done in the older MP Seeker mold (with the side skirts, among other things). It’s a crime not to have Starscream updated, so when I saw this re-issue, I bought it. Though, now in 2018 as I write this, 3Ps are doing their own MP style Starscream that appears to be superior (one example is MakeToys Meteor). So in retrospect, maybe I should not have bought this MP-11 re-issue, especially considering the questionable build quality.

MP-11 with MP Thundercracker and MP Skywarp. MP Thundercracker is in the new Seeker mold like the MP-11, while MP Skywarp is in the old Seeker mold like MP-3.

MP-11 in full coronation gear.

It should be noted that having the figure stand with the coronation gear is pretty difficult. It takes forever to position it so Starscream doesn’t fall ass backwards when wearing the full gear. Another reason to not get MP-11.

Megatron

I saved the best for last. Here we have the big prize of the month – Masterpiece Megatron, designation MP-36! This is the other figure having a new mold this month. Much like MP Optimus Prime that was first released as MP-1, then later got an improved but smaller version of MP-10, Megatron first received the MP treatment back in 2007 with MP-5. Now 10 years later, he is getting an updated version as MP-36, and he is meant to scale with MP-10.

MP-36 Megatron is a fantastic looking figure. Imagine if Megatron stepped out of the G1 cartoons and became a solid, tangible figure. That is how MP-36 looks. Take a look at the pics below. I cannot say enough about the show accuracy of this Megatron. He really is something to behold.

Back view. The upper back is a bit messy, but nothing I can’t live with.

Construction of MP-36 is superb. All joints are tight and clicky. No cosmic rust syndrome here.

MP Megs with the famous MP-10. Look how well they scale together.

MP Megs with his top MP lieutenant.

MP Megs up close and personal.

Look at all these accessories!

Obviously I never even took these out of the box. There’s a lot here to accessorize the Decepticon leader with. Other than the scope / fusion cannon, included are:

  • The silencer
  • The stock
  • 3 alternate face plates
  • Key to Vector Sigma
  • Energy sword (appears in the epic fight with Optimus Prime in the G1 Movie)
  • Pistol (also in the same fight)
  • Damaged chest plate (as a result of same fight with Prime)
  • Energy ball and chain (during fight with Optimus Prime, in Ep2 of More Than Meets The Eye, which he only used once ever)
  • Helmet (used in some Ep in G1 that I no longer recall)

I’m ashamed to say that, even after having this figure for about a year, I still not have transformed it. It’s not that I don’t want to. I took a quick look at the instructions, and it is more than daunting. This figure could very well make it into a top most-difficult list (btw, I really need to update that post and make a 2018 edition). I promise I will transform MP-36 soon.

Grades for the month:

Recommended:

  • TR Blitzwing
  • TR Octone
  • TR Brawn
  • MP Megatron

Mediocre:

  • TR Roadburn
  • RiD Skywarp

Not recommended:

  • MP Starscream

Again, TR Brawn and MP-36 Megatron are the only new molds in this list of Transformers. All others are repaints, and their purchase is at your discretion.

The Decepticons far outnumber the Autobots this month. Poor Brawn and Roadburn… these 2 tiny Autobots had better get back to headquarters and rustle up a few more friends (G1-ers will recognize this reference from Fire on the Mountain).

Transform and Roll Out.
 

Categories: On The Hunt, Pics

Titans Return Brawn Quick Reivew

May 13th, 2018 Comments off

Brawn is one of the more recognizable characters out of G1. He can make a case as the most famous Mini-bot after Bumblebee and Cliffjumper. He is known for his toughness despite his small size, and G1 fans love to point out that he was the first character to die in the G1 Movie.

I don’t have that many Brawn figures. One is DOTM Brawn, which I reviewed. I have a legend sized Brawn that came out a few years ago, included in a group shot in this post. I have a G1 Brawn made into a keychain. And finally I have a small Titan Master Brawn that I never even opened.

Now we are finally getting a G1 update of Brawn in the right size, later in the Titan Returns line. This post is a quick review of the figure.

In the package.

In alt mode.

G1 accurate and rolls well. Even has the iconic tire on top of the vehicle.

Rear view of alt mode.

A Titan Master can sit inside.

With some of his Autobot brothers.

Transformation is painfully simple. Detach the tire piece on top of the vehicle and rotate out the legs. Pull out arms at the sides. Rotate at elbows so the fists face forward. That’s pretty much it. It’s a very basic transformation that we have seen hundreds of times. But it works for this figure. TR Brawn is catered for TransFans that appreciate this character, and in that regard no originality in the transformation is necessary.

In robot mode.

Up close and personal. Great face sculpt that does justice to the G1 animation model.

Rear view. Notice the top tire piece that was detached stays on the back in this configuration.

That tire piece can be used as a shield, seen below.

With other Autobots in robot mode. Scales really well.

If you’re reading this review, you’ve probably already decided you want TR Brawn. At about $10, he’s a great addition to your updated G1 collection.

Go Brawn! Transform and Roll out.

 

Categories: Pics, Toy Reviews

Transformers Purchased in November 2016

July 31st, 2017 Comments off

November of 2016 is filled with some TF goodness. Focus your optics on the figures below and observe.

  • Titans Return Brainstorm, Walgreens, $18.99

  • Titans Return Brawn, Target, $4.99
  • Titans Return Nightbeat, Target, $4.99

  • Titans Return Chromedome, Walmart, $9.88

  • Titans Return Highbrow, Walmart, $9.88

  • Titans Return Mindwipe, Walmart, $9.88

  • Titans Return Wolfwire, Walmart, $9.88

  • Titans Return Astrotrain, Target, $24.99

  • Combiner Wars Sky Lynx, Ross, $12.99

  • Combiner Wars Skywarp, HasbroToyshop via eBay, $22.49

All purchases in November of 2016 belongs to either Titans Return or Combiner Wars. Not a single third party purchase, which was strange considering how many 3P products I have been buying. There are 10 purchases for the month, for a total of 8 figures and 2 accessories (I don’t count the 2 Titan Masters as full fledged figures). All for less than $130. That’s not bad.

Titans Return is definitely continuing in a good direction with some heavy Headmaster action. First up in the month is Brainstorm. I found this figure early in the month. And as rumors have long confirmed, Brainstorm is a Walgreens exclusive! Yes you read that right. Freakin’ Walgreens. Why Hasbro would enter an exclusivity deal with Walgreens makes no sense whatsoever. But I’m glad I believed the rumors and checked Walgreens with regular attention during that time period. There are several Walgreens within short driving distance of where I work and where I live. I was really happy when I found him at this one particular Walgreens that I never go to. The price tag of $18.99 kinda hurt considering it’s only a deluxe size fig, but he was hard to find so I bit the bullet on this one.

Brainstorm is a minor remold of Blurr. I didn’t realize it early on when I looked at the pics. It was only after repeated viewing of the pics that this finally dawned on me. I already commented on the awesomeness of Blurr, so I won’t repeat all that stuff for Brainstorm. He’s built just as well, and there are enough molding differences that a separate purchase feels justified. The detachable piece at the front of the vehicle is obviously different for Brainstorm in that it’s molded more to look like the front of his iconic jet mode. Blurr’s long hand cover extensions are changed for Brainstorm, and Brainstorm has wings at the shoulders while Blurr has none. Blurr’s iconic piece on top of the alt mode, which usually transforms to the top of his head, is now replaced with a simple tail fin for Brainstorm. Titan Master for the two are obviously different, each made to look like the head of the character. And finally, Brainstorm has different stickers on the legs, placed at different positions. All in all, Hasbro made enough changes off of the same mold that having two characters here is warranted. I’m glad Hasbro didn’t just give us a straight up repaint with only the head change. Below is a pic comparing the two. Get Brainstorm if you see one. You’ll thank me later.

There are other versions of this deluxe Brainstorm that you could get. There is the Japanese Legend version, and there is an exclusive convention version (not sure if it’s SDCC or some other con). They each look different in terms of paint scheme and sticker layout, but they each have their origin in what they are modeled after.

Next up are two Titan Masters which I never opened, even as of this writing: Brawn and Nightbeat. I’m generally not a fan of buying these Titan Masters, as I don’t see why you would want to swap heads with bodies. They never did that in the cartoons. But I got Brawn and Nightbeat because they are famous characters from G1. In fact, some customizers have took this Titan Master Nightbeat head and stuck it on the body of Generations Thrilling 30 Nightbeat. I may attempt that myself, so I’ll get a true Headmaster in the modern era. I’m not sure what I will use Brawn for.

Titans Return continue with more purchases in the month. On one trip to Walmart, I found all wave 2 deluxe figs in one shot: Chromedome, Highbrow, Wolfwire, and Mindwipe. All 4 are must haves for me, because they were all original Headmasters in G1. When I brought these 4 to checkout, they each rang up $9.88. That’s right, only $9.88! I thought for sure Walmart must have messed up. I didn’t want Walmart to have the chance to correct any goofs, so I quickly finished checkout and ran out of the store like a Decepticon in full retreat. Turns out, this “goof” was nationwide. I had friends in other cities reporting the same prices. In retrospect I’m not entirely sure if this was a goof. It’s possible Walmart really were selling these at discounted prices. But as of this writing, all TR deluxe figures are around $15 at Walmart. I have seen these 4 figs before this trip to Walmart. I saw them at Walgreens when I was looking for Brainstorm. But I was not gonna pay $18.99 for each of these at Walgreens.

Let’s start with the Autobots. Chromedome and Highbrow are both pretty good figures. Chromedome has a fun transformation. The chest and arms transformation is fairly standard for a robot-to-car figure, but the leg transformation is pretty unique. It’s kind of got that standard Combiner Wars deluxe fig leg transformation, but Chromedome offers a twist in how the windshield is formed. In robot mode, it’s at the back of the legs, forming the heels. In alt mode, it combines and folds forwards, forming the windshield covering the Titan Master driver. Very cool. Chromedome’s head details is also superbly done. Highbrow is another fun figure. His transformation feels simpler than Chromedome’s. One interesting transformation mechanism is pulling down the waist when you go from robot to helicopter. Then you rotate and inwardly fold up the legs, like some CW deluxe figs. Rest of the transformation is pretty standard fare (arms to the sides, fold out the cockpit from the back). Highbrow also has amazing details to the head mold, making him look like the G1 character. Both Chromedome and Highbrow are well built. Their robot modes look nice, and their alt modes come together well with no issues. Both their alt modes provide space for the driver/pilot. Chromedome and Highbrow are both recommended purchases in the Titans Return line.

With the addition of Brainstorm, Chromedome, and Highbrow, and Hardhead from the last wave, I now have all the original Autobot Headmasters from Season 4. Check out pics below. It’s a dream come true to have modern interpretations to these iconic G1 characters. Kudos to Hasbro.

Now for the Decepticons. The two deluxe figs this month are Wolfwire and Mindwipe. Wolfwire was called Weirdwolf in G1, and I’m gonna guess that the name change is for legal reasons. Weirdwolf is such a better name as it’s a wordplay on werewolf. Anyways, TR Wolfwire is the best of the three Decepticon animal Headmasters so far. He’s got an awesome looking wolf mode that has to be seen to be believed. I love the head mold of the wolf, with jaw biting action that will seriously hurt some Autobots. There are enough articulation in the wolf arms and legs for some good poses. Both the gun and sword accessories have places in alt mode; the sword becomes the tail, and the gun can be placed on top of the wolf’s back near the rear. The Titan Master can sit inside the gun, or can be placed inside the main body cavity, accessible from a hatch on top of the back. Transformation to robot mode is pretty straightforward. The wolf arms and legs become the robot arms and legs. I generally don’t like this motif, because I think it’s a lazy transformation. Wolfwire is certainly guilty of this, but he’s got some clever mechanics for the rest of his transformation that make up for it. The way that the main body transforms deserves special mention. From alt mode to robot mode, Wolfwire has this unqiue lower abdomen mechanism where the body collapses on itself, making for a shorter main body that is more proportionate in robot mode. The Decepticon logo is painted very nicely on the chest. I wish faction logos were done this well all the time. If you only had the funds for one deluxe Decepticon Headmaster in the TR line, get Wolfwire.

The other deluxe Decepticon this month is Mindwipe. I have G1 Mindwipe. It was a birthday gift from my cousin. I still have it to this day, in pretty good shape too. About a year ago, I bought this 3P Mindwipe from FansProject called Sigma L. I love FansProject, but I thought Sigma L is only ok, not bad, not great. So I was kinda hoping that TR Mindwipe would do the character more justice. There are some interesting things going on for TR Mindwipe, but as a whole I would say he’s one of the more lackluster figures in the Titans Return line. Let’s start with the better mode: the robot mode. He looks good in this mode. He’s well proportioned and he’s got plenty of articulation. He’s got a great head sculpt. The joints are at the right tolerance. Even the wings on his back are of the right size. They’re big enough in appearance, but not too big that it’s distracting or get in the way. The Decepticon logo is beautifully painted on the chest. There’s one big weakness in robot mode though, and that’s the back. The bat head has nowhere to go, and kinda just hangs off the back. You can position it so the bat head is hanging off the butt instead, but I think that’s a even worse look. Transformation to bat is quite clever. The arms become the feet, and the legs open up to reveal the wings. The transformation really is quite cool. However, bad construction plague this figure, much like many of the other TR deluxe figures. The right wing is really loose on my figure in alt mode. And the accessory that plugs in to become the tail, it doesn’t plug in too nicely. One slight touch and it comes off. This figure could have been so great if the construction was more solid. And if they designed a place for the bat head in robot mode. Like if it somehow went inside the Headmaster chamber.

Below is a pic of all the original Decepticon Non-Horrorcon Headmsters from Season 4. Skullsmasher (Skullcruncher) was from July of 2016.

Now for the only Triple Changer of the month: Astrotrain. TR Astrotrain is a repaint of TR Sentinel Prime. As of this writing, I have sold my Sentinel Prime, because I felt he’s just too damn orange. And because this mold was meant to be Astrotrain anyway. Yes Hasbro screwed me with their double dip tactics by releasing the more famous character later using the same mold. If only I had more willpower, I would not continue to fall for this.

Let’s take a look at the shuttle mode first. In this mode, Astrotrain is not the standard NASA space shuttle that we’re accustomed to. The overall body is more flat, with a large Titan Master compartment toward the top and rear. It looks more like a Cybertron shuttle, or something from futuristic sci-fi. All the panels tab in securely in this mode, something that worked less well on Sentinel Prime. The retractable landing gears are a nice touch. Astrotrain is decked out in his iconic purple and grey, with touches of black here and there. Transformation from shuttle to robot is super straightforward. It’s almost painfully simple. Astrotrain looks good in this mode. Body proportions are nicely balanced. His head mold is terrific, and looks exactly like Astrotrain should. I should point out that the Japanese version of this figure has better paint apps, though. The US version is light grey, while the Japanese version is dark grey. The dark grey is much more accurate to G1, both in terms of the show and the toy. This fact becomes a lot more obvious in robot mode, when looking at Astrotrain from the front, he is mostly grey. Transformation to train mode from this mode is interesting to say the least. First you pull the legs apart to either side, like if Astrotrain is doing the splits. From there it becomes pretty obvious; arms raise up and attach on top of the legs on either side, some minor panel flaps on the legs, flip over the feet so the train head comes out, and position the back Titan Master compartment on top of the train. This is another mode where TR Astrotrain got an upgrade. He’s no longer the old-school steam locomotive, but now more of a bullet train. Astrotrain looks ok in this mode. Sort of long and skinny, but I guess that’s how a train should be. This is another mode where the Japanese colors look much better than the US version, especially if you had both figures side by side. My overall impression of this figure is that he’s ok. He’s a good modern update. But I think deep down, I still want a Astrotrain with a proper NASA shuttle mode and a true steam locomotive mode. My hardcore G1 preferences is taking over here. I can live with the fact that he’s a Headmaster, but I still prefer him not being one.

This month also has Combiner Wars purchases. Yes I said Combiner Wars. By this time, the CW line has been long dead. But I did miss out on some figures in this line, and I was fortunate enough to find them this month.

The first CW fig this month is Sky Lynx, and he’s the 2nd space shuttle this month. But unlike Astrotrain, he’s still a NASA shuttle, with ground transport. This Sky Lynx looks G1 through and through. However, he only transforms from the space shuttle and ground transport mode to his full on griffin-like robot mode (and combined mode, but more on that later). In other words, he doesn’t separate into two components (the dino-bird/shuttle and lynx/transport) like he did in G1. I had a G1 re-issue of Sky Lynx briefly, for about two years, before I sold it (and actually made a slight profit on this). The G1 toy was kinda gimmicky. It was done by the same company that also did the original toy that would become Omega Supreme. I never had G1 Sky Lynx growing up, so my curiosity prompted me to buy the re-issue as an adult. He’s fun for a while, but the gimmicks wear off fast.

G1 Sky Lynx was not well received at all back in the 80s, both in terms of the character and the toy. However, in the days of CW, fans were singing praises about CW Sky Lynx, and he was probably the hardest figure to find in the line. I pretty much gave up looking for CW Sky Lynx. Until one day in Nov of 2016 when I found him at Ross. That’s right, Ross! Hasbro’s strange distribution rears its ugly head again. There was a time (I think around 2010 and 2011) when I regularly went to Ross and other discount stores, because new figures from Hasbro would go there instead of the usual places.

Combiner Wars Sky Lynx is not a bad figure, but I wouldn’t put him in the must-buy category either. Like all the other body component figures in the CW line, Sky Lynx is not perfect. They all have at least one mode that I consider lacking. I would say the best one in CW is Silverbolt (and his repaints). Sky Lynx would probably be the next best one. I like his alt mode, and he works well as a combiner body. But the griffin mode is just so-so. Still, the real value of this figure is having the ability to form Sky Reign. And that’s worth the price of admission, especially when admission price is only $12.99. Yes Ross is a good place to get TFs when you can find them. Below is a long over due pic of Sky Reign. All the limb components were bought in Feb of 2016.

Final purchase for the month is Leader class Skywarp. I already have the other two repaints of this figure, Leader Thundercracker and Starscream. So I was not gonna get Skywarp at full price. Around the end of Nov of 2016, I was vacationing in Cabo, attending a destination wedding. I think I opened the eBay app on my phone to check on one of my sales, and saw that Skywarp was on sale for half price! I wasted no time and got one. He’s just like the other 2, so I won’t go into detail. With Skywarp I have now completed the trio. Skywarp is my final purchase from the Combiner Wars line.

The pic below is for all the Decepticons this month. Autobots beware!

Whew! That was more TFs than I thought. Next month will wrap up 2016 with more Titans Return action. Til then… Transform and Roll Out.

 

Categories: On The Hunt, Pics

My TF Legend Collection

November 27th, 2012 2 comments

Legend class figures are some of the smallest figures that Hasbro makes. Sometimes they’re called Legion figures. Since they’re so small, I put them all in one box, regardless of which series they came from. This way it’s easy for me to find them. They are all super easy to transform. I usually don’t buy them, but they can be a fun distraction every now and then. So I was kind of surprised when I took them all out and see that I have this many. Guess they add up like everything else.

From left to right:
Back row: Vehicon, Motorbreath, Thundercracker, Megatron
Middle row: Dualor, Warpath, Trailcutter, Gold Bumblebee, Beachcomber, Prowl
Front row: Wheelie, Optimus Prime, Hoist, Bumblebee, Brawn, Bluestreak

Some random thoughts in bullet points:

  • I recommend all of these, except Vehicon and Dualor. Deluxe Vehicon is way better, both FE and RID. Dualor is just a waste of space.
  • As of this writing, 4 of these are readily available: Thundercracker, Motorbreath, Hoist, and Bluestreak. Get to your Toys R Us store if you want them.
  • For a lot of these figs, I’ve only seen them once. They include: Optimus Prime, Wheelie, yellow Bumblebee, Brawn, Beachcomber, Warpath, and Dualor. It’s safe to say they’re rare.
  • The only one I would say is not that rare is Gold Bumblebee, though I think I’ve only seen him like 3 or 4 times.
  • As a G1 purist, I would say the must gets are Wheelie, both Bumblebees, Brawn, Warpath, and Beachcomber. Their small size accurately reflects how they were in G1. Though it’s worth noting that Warpath and Bumblebee have more impressive Deluxe versions too.
  • For the time being, I would also get Trailcutter and Hoist, just because these are the only way to get CHUG representations of the characters. I’m still holding out hope that Hasbro will give us Deluxe versions of these guys. Then the Autobot cars from the first 2 seasons would be CHUG complete in Deluxe or larger (sans Skids, but I don’t care much for Skids).
  • Prime, Megs, Thundercracker, Prowl, and Bluestreak are all good figs. But their larger counterparts in CHUG are way better. And as Legend they make no sense scale wise. So only get them if you’re hardcore or a completest.
  • Conspicuously missing is Cosmos. He’s super rare.


Bluestreak: Hoist, it’s your turn to mow the lawn.
Hoist: No way dude! I did it last week.

Legend figures… Transform and Roll Out.

Categories: Pics, Toy Reviews

ROTF Brawn Review

April 9th, 2010 2 comments

I have been very impressed with some of the new figures that were released in the Revenge of the Fallen line. This is partly due to the fact that I’ve been more selective in the figures I buy from ROTF, unlike the first Michael Bay Movie where I bought almost every new mold that was released, in which case you get the good with the bad. In ROTF I only buy the ones that I think I will like, and so far I am not at all disappointed. Out of the select few that I felt warranted a purchase, I am genuinely impressed with the toys’ clever mechanical engineering, unique transformation, solid construction, great aesthetics, and in many cases, obvious homage to G1. The last ROTF figure I reviewed was Dirge, a highly recommended figure for all these reasons. Today I will be reviewing ROTF Brawn, a figure I picked up last month but unfortunately did not have a chance to open until this past weekend. Before I start the review, I will just say that he also gets a very high recommendation for all the same reasons just mentioned. So if you don’t want to bother reading this review, just go out and get him now. But if you’re still here, I will explain why he’s a must have in your TF collection.

Brawn is definitely well known among fans of G1. He appeared as early as the 1st episode, and he is famous for being the tough, no non-sense Autobot that fights first and asks questions later. He is small but strong, often taking down Decepticons much larger than himself. In the G1 Movie he was the first TF to die, running right into a direct blast from Megatron’s weapon mode (some fans have theorized that his Spark must be located in his shoulder if one blast in that area would kill him).

To my knowledge, ROTF Brawn does not appear in the movie. It’s possible he has an appearance in the ROTF video game, but I really don’t know. Regardless, his ROTF incarnation definitely takes cues from G1. Check him out in the package.

Brawn’s alt mode is some kind of 4×4 pickup truck. In G1 he was a jeep or off-road type vehicle, but I think being a truck works just as well to reflect his rough and tumble persona. Appearance wise, the truck mode does not disappoint. There are plenty of detail all over, and I especially like the look of the front grill. His overall color is a weird shade of brown. On any other TF this may look a bit strange, but it works for Brawn. His G1 color was a different shade of brown that looked a bit more cartoony, so this more realistic brown is a better fit for a ROTF figure. We see bits of green here and there, while the front blinkers are painted yellow and the rear break lights painted red. I also really like the NEST Autobot symbol painted on the side.

Situated on top of Brawn is a good size cannon that he can use for combat in alt mode. The following pic shows that this cannon can be angled upwards to shoot down some incoming Decepticons.

The construction of this figure is quite solid. Brawn is another ROTF figure where you don’t realize how well everything fits together until he is transformed from robot mode back to alt mode. All panels are designed to click into place so there are no dangling pieces. He rolls quite well on a flat surface. Below is a shot of the rear view.

In the pics below, I do some size comparisons of the alt mode. He’s pretty much standard deluxe size.

Overall, I’m very happy with Brawn’s alt mode. No complaints at all. Now let’s move on to the robot mode.

Transformation into robot is pretty unique. The hood and engine section of the truck forms the legs. The cargo area forms the arms, while the cabin area makes up most of the body. I know it doesn’t sound so unique when I describe it in words, and conceptually it does feel like it’s been done. But when I transformed him the first time, the process felt very refreshing. It was probably in the little details of how things are formed. For example, the two pistols are placed in his hands even in truck mode. This means he’s ready for action as soon as he transforms. Brawn wastes no time. In almost all other TFs, the weapons are usually placed elsewhere in alt mode and then you put them where they need to go in bot mode. It’s nice to see a TF break that trend.

The cannon seen in truck mode can also be used in robot mode. It is positioned nicely on his back when not in use, but when he needs some extra firepower, the cannot folds forward right over his sholder. Notice that there is a scope attached to this cannon, and the whole thing can be positioned so that this scope is right in front of his eyes. Very nice. Brawn is all warrior and the toy designers certainly did not forget that fact.

Appearance wise, Brawn’s robot mode takes heavy cues from G1. His body colors of green and yellow is distinctly G1. The head mold, while not looking too much like the G1 cartoon, is very reminiscent of the G1 toy figure of the mini-bot. Its got the silver helmet, black visor as his eyes, and no lips in the mouth area. Brawn is bulky looking all over, and this fits perfectly with the warrior whose motto is “Might over microchips”.

Brawn has got great articulation and he’s capable of a wide range of poses. He is a tad back-heavy so balancing him in some action poses can be tricky, but it’s not a big issue.

Brawn ready to take down Decepticons all by himself

Overall, I can’t recommend Brawn enough. He will be a worthy addition to your TF collection. There really hasn’t been that many incarnations of Brawn. Other than this one I can only think of the G1 figure (which sucks by today’s standards) and the scout class figure in the Universe line that was released early 2009 (that’s a great figure, BTW). It’s good to see him get some love in the ROTF line. Show Hasbro they did the right thing by honoring a purchase. Go out to your favorite retailer and get this now… Transform and Roll Out!

Categories: Pics, Toy Reviews