A recent trend I see among my monthly purchases is that I buy more 3rd and 4th party figures than official products. Some recent examples were June 2016, March 2017, and November 2017. May 2018 further contributes to this trend.

You see that Hasbro? Release quality products, and people will buy. It’s not rocket science.

• Studio Series Starscream, Target, $29.99

• Mech Planet Big Yellow Bee, chosenprime.com, $17.99
• Zeta Toys Air Strike, chosenprime.com, $59.99
• MakeToys Ironwill, chosenprime.com, $79.99

Starscream

I went briefly into Starscream in my last post, so I won’t repeat all that here. Just know that he’s an awesome figure from the Studio Series. I’ll let the pics below speak for themselves.

With Nitro from The Last Knight, another excellent figure.

Big Yellow Bee

HasTak gave us a marvelous rendition of G1 Bumblebee in the Masterpiece line. However, if you always felt that you needed a CHUG Bumblebee that is G1 accurate in both robot and alt modes, which HasTak is unwilling or unable to do, then you need look no further than Big Yellow Bee by Mech Planet.

Big Yellow Bee is an excellent 3rd party take on everyone’s favorite yellow VW bug from G1. He transforms exactly like you think he would, so I won’t describe it too much. The build quality is superb for a $17.99 third party toy. I don’t have any other offerings from Mech Planet. Big Yellow Bee was my first one, and I was quite pleased.

Check the pics below. The faction symbol is after market, obviously.

Big Yellow Bee scales nicely with his mini-bot friends in the CHUG line.

The way that Big Yellow Bee compacts into his alt mode is actually very impressive. Arms, legs, and head all compact into the body area. It does take some cues from MP Bumblebee, but this is quite a feat nevertheless. If he got any smaller from robot to vehicle, you would think he’s mass shifting.

Scale in alt mode.

Big Yellow Bee comes with some accessories. Again, considering the price, this isn’t bad at all. He comes with a pistol, the spare tire wheel cover, and a chest plate type thing that I’m not sure what it’s supposed to be. And in the poly bag, there’s the instructions, a bio card, and some mystery accessory labeled “HOT”. That’s a lot of stuff in the package. Great value here.

I recommend Big Yellow Bee without hesitation.

Air Strike

Air Strike by newcomer Zeta Toys is their interpretation of Air Raid. I first mentioned Zeta back in this post, when I featured their figure for Fireflight called Flyfire. Zeta Toys is an offshoot of ToyWorld. Or more specifically, toy engineers at ToyWorld felt cheated, so they left the company and formed Zeta. Power to the employees!

As of this writing, I only have two items from Zeta. Air Strike was the first one, and Flyfire was the second. They were released in that order, too.

First let’s take a look at Air Strike in the box.

He comes packaged in a nice soft polystyrene box. I prefer this kind of package. I hate Styrofoam, because you’re bound to have little white bits fall off the box and it gets everywhere. I also don’t like plastic clam shells, because it’s hard to put the figures back into them. This kind of packaging is perfect, for what it is. It’s durable enough to protect the figure, while at the same time being easy to handle. I’m sure this is not environmentally friendly either, but none of them are. All in all, this is a no-frills type of packaging, and that’s how I like it. Some companies like to do extra special type boxes to give the items more of a collector status. I’ve never been into that sort of thing.

As far as accessories, Air Strike comes with 4 missiles and his rifle. Included also are the instructions and a bio card. It’s pretty minimalist for a figure of this size. But considering that the price is only $59.99, I feel it’s more than sufficient.

Air Strike looks great in robot mode. See the two pics above. As far as looks, he feels like a combination of the toy and the animation model. I still have my G1 Air Raid. He’s in pretty good shape. The design of Air Strike’s head feels more like the G1 toy, with the blocky shape and visor eyes. The rest of figure takes aesthetics from both the toy and the show. Overall, no one will mistake this figure for any other character besides Air Raid. The iconic black jet on the back, white body, and red chest all screams Air Raid.

Air Strike is a large figure. Below is a pic of how he scales next to War For Cybertron Siege Galaxy Optimus.

Siege Galaxy Optimus is a leader class figure. And Air Strike is taller than him, if you look at where the top of their heads are. In this pic I forgot to flip out the nosecone of Air Strike. If I did, he would be even taller. Air Strike is this size so we would get an accurately scaled MP Kronos (Superion). But individually, the Zeta Aerialbots are probably too fig for standard MP scale. Zeta is betting that most fans want Kronos to scale well with the rest of their MP collection. To that end, this Zeta team should fit the bill. As of this writing, I only have Air Strike and Flyfire, but I’m told that Kronos is very, very impressive when combined.

Transformation to jet mode follows the standard Aerialbot scheme. It’s more complicated than G1 of course, but nothing that would trip up any experienced TransFan.

That is a great looking Air Raid. Zeta did a marvelous job in capturing the look of this iconic black F-15. I probably should have took a pic of Air Strike next to the standard MP Seekers. They’re about the same size in jet mode. In the above pic, I don’t have the 4 missiles attached, but they go under the wings like you expect them to.

I do want to point out that there’s something weird about the front landing gear. On my copy, it’s not possible to get it out without detaching some other pieces first. It’s a minor annoyance for sure. Also, the figure as a whole feels light. I went into this too when I briefly covered Flyfire. My guess is that the materials used for the Zeta figures is not as high quality as the ToyWorld offerings. At only $59.99, they had to cut corners somewhere. Zeta decided to save on using higher quality plastics. And it goes without saying that there are no die-cast on Air Strike to speak of.

So do I recommend Air Strike? That’s a difficult question. Hardcore G1 TransFans, of which Air Strike is catered to, would look to get the entire Aerialbot team. So I almost need to look at the entire set, and see how they combine, before making a recommendation. Also, as of this writing, Fans Toys have come out with their own team of 3P Aerialbots. To this date they have only released Maverick (Silverbolt), and I have not seen any of the limb components. By itself, Air Strike is not a bad figure by any means. He looks great in both robot and jet modes. The transformation is fun, the engineering is solid. However, individual bot size can be an issue (too large). The plastics used does feel inferior to other 3P figures of this caliber, and there’s the front landing gear issue I mentioned. As it stands, I will refrain from making any recommendation, until I have seen the whole team.

Ironwill

The last figure this month is Ironwill, MakeToys’ 3P homage to Hardhead. I bought Ironwill back in November of 2017 during a Black Friday sale. In this same sale, I got Contactshot and Despotron, all by MakeToys. Chosen Prime must have some kind of working relationship with MakeToys, to be able to offer their figs at such a discount. Anyways, Ironwill was bought back then, but did not become in stock til this month.

Ironwill comes with two rifles, his iconic should-mounted cannon, an extra toy-accurate face plate, and instructions. Surprisingly, he does not come with a bio card. That’s almost standard for 3P MP figs these days. Personally I don’t think it’s a big deal to not have one, but just wanted to point it out for those of you that are expecting it.

In robot mode, Ironwill looks good. MakeToys did a fantastic job in updating the look of this character in MP form. The figure feels solid and hefty, befitting of someone whose name is Hardhead.

The figure has tight and clicky joints, just the way I like them. He’s capable of some good poses, and he can stand vertically just fine without leaning too forward or back.

I do have some gripes about Ironwill in robot mode. I don’t like the way that the main shoulder cannon is attached. It just clicks into place, using the most rudimentary rotation joint. It’s weird, but sometimes the joint feels too tight, while other times it feels too loose. Maybe it’s based on the weather (or the phases of the Cybertron moons). The up-and-down swivel of this cannon also feels a tad too loose. I suspect that, over time, pointing the cannon up and holding it there would no longer be possible.

The back pieces of Ironwill also do not hold too well in place in robot mode. When handling the figure, and especially when transforming, the back assembly can become undone when you don’t want it to. I wish there was more of a click-into-place mechanism here.

Ironwill’s transformation hits all the right notes, and is fun for the most part. Again, where I found it frustrating is the main cannon and the back assembly. They don’t stay in place well during the transformation. It’s probably easier to remove the cannon and re-attach after transforming is done. But that feels like parts-forming, and totally unnecessary given that the cannon doesn’t switch position. If the engineering was better on the cannon attachment, this won’t be an issue.

Here is Ironwill in alt mode. The Cybertronian tank looks great. The Headmaster figure can ride inside.

Fans will undoubtedly compare Ironwill to ToyWorld Hardbone. Honestly, I’m not sure which is the better figure here. Most fans will probably choose Ironwill. But there are a bunch of things I like better about Hardbone. Hardbone scales better with other MPs, in my opinion. Ironwill is too big to scale well with anything (should have taken a pic here). Hardbone does have a superior shoulder cannon attachment, and he comes with some cool accessories.

My final verdict on Ironwill is get it if you can find it at the price that I did. Regular MSPR is over $100, and at that price there needs to be less issues with the figure.

That does it for May. Some awesome stuff is coming next month, so stay tuned. Transform and Roll Out.
 

It is that time of year again! St Patrick’s day is upon us, and that means another feature of my green Transformers.

As a rule, I always use green TFs that I have not used in a previous St Patrick’s Day post. Every TF needs their 15 minutes. I actually found quite a few TFs to feature this year.

Back row standing, left to right:

• Titans Return Sixshot – upper chest mostly green, so he qualifies
• Ocular Max Artifex – 3rd party MP Hoist
• MakeToys Ironwill – 3rd party MP Hardhead

Front row in alt mode, left to right”

• War For Cybertron Siege Hound – excellent Hound figure from the Siege line
• Combiner Wars Hound – not the best Hound, but ok
• Studio Series World War II Bumblebee – interesting fig, but not that good
• Titans Return Brawn – great modern update of Brawn
• Titans Return Skullsmasher – modern update of Skullcruncher, ok fig with some construction issues
• Robots in Disguise Grimlock – this is the voyager fig that I first saw in Shanghai; I bought later from Entertainment Earth, and quite frankly, he sucks; glad I did not pay high prices in Shanghai to get this

Unlike many previous years, March Madness has not started before this year’s St Patrick’s Day. In fact, the Selection Committee will release the bracket sometime today. UCLA will not be selected this year. Woe is me.

Here are links to previous St Patrick’s Day posts:

2018
2015
2013
2012
2011

Have a safe and happy St Patrick’s Day everyone. And let March Madness begin! Transform and Roll Out.

 

Here we are again. Another St Patrick’s Day, another post for my green Transformers.

Featured in this year’s green and mean machines:

• Titans Return Hardhead
• MakeToys Gundog
• Toyworld Hardbone
• Unique Toys Allen
• Generations Thrilling 30 Springer

For the first time in the history of these St Patrick’s Day posts, the number of third party figures outnumber the official HasTak figures. Very indicative of the trend in the hardcore TF fandom.

Another weird trend: this is the 4th blog post in a row that I have featured MakeToys Gundog. This is not be design. Maybe I’m secretly in love with Gundog. Smart readers will notice that I took this pic before my last post about the rub on decals, since Gundog still is shown here with his sticker faction logo.

And in the tradition of these St Patrick’s Day posts, I have to mention March Madness. My beloved UCLA is already knocked off in the First Four! They couldn’t even get to the First Round. And I never thought I would see this in my lifetime, but a No. 16 seed has knocked off a No. 1 seed! UMBC just eliminated Virginia in the First Round! This totally busts by bracket. Yes, I picked Virginia to win it all. This is much like 2012, when I picked No. 2 Missouri to win it all and they were upset by Norfolk St. I don’t even know why I try. But this is historic! UMBC didn’t just win, they completely dismantled UVA. And Virginia wasn’t just a No. 1 seed, they were the overall No. 1 in the Tournament. UMBC is a school you have never heard of (unless, of course, you’re from there). You could Google what UMBC is, but after tonight, everyone will know them as U Must Be Cinderella.

Here are links to previous St Patrick’s Day posts:

2015
2013
2012
2011

Have a safe and happy St Patrick’s Day everyone. And congratulations to UMBC! Transform and Roll Out.

 

July 2016 is blessed with a heavy dose of TF goodness. This month marks the start of a new TF line – Titans Return! TR is Hasbro’s official update of Headmasters, and I have been looking forward to this series of figures for quite some time now. July also includes some excellent third party acquisitions.

• Titans Return Galvatron, Toys R Us, $24.99

• Titans Return Sentinel Prime, Toys R Us, $24.99

• Titans Return Skullsmasher, Toys R Us, $16.99

• Titans Return Hardhead, Toys R Us, $16.99

• Titans Return Scourge, Toys R Us, $16.99

• Titans Return Blurr, Toys R Us, $16.99

• Titans Return Stripes, Target, $10.29

• Combiner Wars Starscream, HasbroToyshop via eBay, $35.99

• Masterpiece Ramjet, tfsource.com, $179.99

• ToyWorld Muddy, tfsource.com, $80

• DX9 Carry, tfsource.com, $129.99

Quick sidebar: I started a new job in July. It was bittersweet to leave my last job, after 9 and a half years there. For reasons that I won’t go into, it became obvious that I should no longer stay at that job. I like my new job. I won’t say that it’s better than my old job in all aspects, but I’m playing the long game, and I’m confident that this new position will work out better for me in the long run. Besides, my new job allows me more time to dedicate to this blog. This was the first post after starting the new job. I have been more consistent in making new posts since then.

Those of you that read this blog regularly know that I like to hit up stores at lunch time and hunt for TFs. And just like my old job, there is also a TRU near my new job. The very first week on this new job (I think it was Day 2), I found the Titans Return figures at the TRU! I say this is a clear sign that I made the right decision in taking this job.

Titans Return

So let’s go over these TR figures first. I found all the Wave 1 deluxe and voyager figures in one shot. The 4 deluxe figs are Blurr, Scourge, Hardhead, and Skullsmasher. And I like them in that order, from best to worst.

Blurr is an awesome fig. The alt mode is extremely cartoon accurate in appearance. The robot mode is nice and proportionate. Transformation is smooth and intuitive, complex enough to feel like it’s not made for kids, but not too complicated that it distracts from the fun. Construction of the figure is superb, no joints too loose or too tight, and no tolerance issues. My only gripe is the color. The US version of TR Blurr is like this dark turquoise color. Why they decided to go with this color scheme is beyond me. Especially since the Japanese version (called Transformers Legends) has G1 accurate colors. For that reason, many hardcore G1-ers have decided to import the Japanese version. I may do that myself at some point. Blurr was never a Headmaster in G1. In TR, his Headmaster partner (now called Titan Masters) can fit comfortably inside the vehicle in alt mode, and attaches nicely in robot mode. All in all, TR Blurr is highly recommended, despite my gripe with the colors.

TR Scourge is a solid fig. Like Blurr, G1 Scourge was never a Headmaster. And like TR Blurr, the Japanese version of TR Scourge has a color scheme more similar to G1. TR Scourge has a much more accurate cartoon alt mode appearance over the Generations figure that was released around 2011. Sometimes in the cartoons, you see Scourge fly around in alt mode with his head exposed, on top of the spaceship. With TR Scourge, you can reproduce that look. All you need to so is stick the Titan Master in head mode on top of Scourge in alt mode. I like the robot mode as well. When compared to the robot mode of the Generations fig, it’s debatable which is more toon accrurate. They each have their pros and cons. But in my opinion there are no obvious weaknesses with TR Scourge in robot mode. He’s fun to transform, and he’s well built. Scourge became a Targetmaster in Season 4, so I guess making him a Headmaster is not that far-fetched.

Hardhead was one figure that I was really looking forward to in TR. I always regretted not buying the G1 figure, and I had many opportunities to. As a kid in the 80s with a very limited allowance, G1 Hardhead was a bit out of my price range. But I always liked his alt mode, and the robot mode wasn’t too shabby for G1 standards. I do have Hardbone, ToyWorld’s take on Hardhead. I highly recommend that figure, though as of this writing, you may want to consider Iron Will by MakeToys if you are in the market for a 3P Hardhead. Anyway, back to TR Hardhead. He’s only ok. I like the alt mode and the robot mode, but the figure feels a bit flimsy. During transformation, the figure feels extremely hollow. I think the reason for that is equal parts design and construction. And speaking of construction, Hardhead is not the best. He’s ok, but some parts are too loose for my liking, especially in the legs and hips. This figure could have turned out so good if they made some design tweaks, and if the build was improved to have better tolerances. His floppiness is so not worthy of the name Hardhead. As is, I can only recommend Hardhead to hardcore G1 devotees like myself. Casual TransFans should invest their money elsewhere.

Last of the deluxe TR figs is Skullsmasher. In G1 he was called Skullcruncher. I can only assume Hasbro renamed him for license reasons. This alligator Headmaster is probably one of the most unique in the world of TF. I mean, what other figure transforms into an alligator? And on that point, Skullsmasher is awesome. I love his alt mode. The toy designers really hit it out of the park with the look of the mechanical alligator. That alligator head mold has to be seen to be believed. Even the paint job is superb for a $15 toy. Some parts of Skullsmasher have this shiny, metallic finish that you only find in MP or 3P figures, and I commend Hasbro in this application. However, I mentioned that this is my least favorite of the 4 deluxe figs. Transformation and robot mode is where this figure falls apart, literally. Construction of the figure is beyond poor. Many joints are way too loose, and I guarantee you some limbs will fall off the first time you transform the figure. Holding action poses for Skullsmasher in robot mode is difficult if not impossible, due to the weak joints. Some glue or nail polish application in the ball joints should address this, but it’s not something I should have to do. Skullsmasher is recommend for hardcore G1 fans only.

Hasbro, IDW, Paramount, and whoever else is behind the Transformers have been super inconsistent with Sentinel Prime’s appearance. He’s a large and pinkish-red modern fire engine in the Movie-verse, a medium size blue pick-up truck in TF Animated, and (mostly) various shades of orange and yellow in different CHUG lines. Even when focused strictly on CHUG, it’s hard to pin down Sentinel’s appearance. And due to that reason, he’s the perfect character for a first lease of a new mold. Hasbro does this because hardcore fans like me would buy anything when it’s a new mold, then they repaint this mold with a more famous character later and I’ll buy it again (damn you Hasbro). In this case, TR Sentinel Prime is using a mold designed for Astrotrain, which they intend to release later. The body styling resembles Astrotrain, and he’s got a space shuttle alt mode and a train alt mode. All Hasbro had to do is repaint the mold and give the figure a new Titan Master for a different head design. Personally, I think this mold is not half bad. But it’s more appropriate to look at this mold in more detail when Astrotrain is released, so I’ll reserve final thoughts til then. But I will say this now… Sentinel Prime is way too orange. It kind of makes for a goofy looking Transformer.

Last in this TR lineup, but certainly not least… behold… Galvatron! Hasbro has not made that many direct G1 updates of Galvatron in the modern era. The only one I can think of is the deluxe Generations fig that was released in 2008, which was way too hard to transform to be any fun, and no Galvatron fig should be smaller than voyager class. Age of Extinction Galvatron doesn’t count as a real Galvatron. Combiner Wars had Galvatronus (formed with Cyclonus as the main body), but that’s not a standalone figure. So a real voyager sized, G1 inspired, and standalone Galvatron figure is a real treat! And Hasbro did not disappoint. TR Galvatron is the definitive CHUG Galvatron that we have been waiting for. The figure comes packaged in robot mode. This is hands down the most show accurate looking Galvatron produced to date (not counting 3P products). The figure in robot mode is well built and nicely proportioned. I don’t detect any construction issues, and he’s got enough articulation for some nice poses. He’s voyager size, so he scales well with other leaders of this size, such as Optimus and Cyclonus (quick sidebar: I hope Hasbro will one day make a CHUG voyager size Rodimus Prime, but that’s for another day). This Galvatron is both a Headmaster and a Triple Changer. I can see some G1 purists scoff at this change, but I personally don’t see it as a big deal. One alt mode of TR Galvatron is the futuristic Howitzer-like cannon first made famous in the G1 Movie, and the other alt mode is a jet with the huge orange cannon attached in the front. Both alt modes are pretty cool. The transformation mechanism is well designed and superbly implemented. Some parts in certain configurations could probably have been better tabbed in, but it’s a minor gripe. The Titan Master feature is ok. Hasbro chose a weird implementation where there is a helmet that flips out over Galvatron’s chest and it covers the head. I guess this was done so you can use any Titan Master figure with Galvatron. It looks ok, but I still wish he had a non-Headmaster head. I’m hoping that some third party will make a separate, G1 accurate head for TR Galvatron. I highly recommend this figure. Despite some minor negatives, it is the best official Galvatron figure made. Go out and get yours if you haven’t already.

Oh, I should mention that I also got Stripes this month. I found Stripes on the very last day of the month. Seriously, I took all the pics for the figures I got this month earlier, thinking I won’t find anymore. Then Stripes sneaks in on me on the last day! I think Stripes is a totally made up character. This mold is meant to be for Ravage, and the release of Stripes is just another quick cash grab for Hasbro (like Sentinel Prime before Astrotrain). I should have just left him on the shelf at Target, but the TF collector in me won’t let me. I’ll go more into Stripes when I do my purchase post for next month. I found the other 2 figures in the same wave as Stripes next month, so it makes more sense to mention him then.

Combiner Wars

By the middle of 2016, the number of CW figs have dwindled. TR is now in full swing, and that is now the active line considered to be CHUG, catered to mature, adult collectors of TF. Nevertheless, some CW figs are still out there. And here is one that I did not purchase during it’s initial release: Leader class Starscream.

I love Starscream. There is no other character like him in the entire TF universe. I try to get all Starscream figures produced in MP or CHUG form. I bought CW Leader class Starscream one day before I started my new job (on Hasbrotoyshop via eBay). This Starscream is an exact repaint of Leader Thundercracker that came before it. And for that reason, I won’t go into too much detail. I don’t like paying full price for something so similar, so I waited for a bit of a sale before committing to buy. But know that he does come with the bling-bling crown he wore during his gaudy coronation ceremony, shortly before being vaporized by Galvatron, in the 1986 movie.

Masterpiece

The lone MP figure this month is Ramjet. And I’ll get right to it… he’s disappointing. I wanted to like this figure, I really did. Hasbro and Takara have pumped out so many repaints of the 2nd generation MP seeker, and like an addict I bought all the US versions (including Thundercracker, Acid Storm, and Sunstorm). And I think that’s part of the problem… Hasbro/Takara has used this mold way too many times. I have been told that, when a mold gets used for manufacturing repeatedly, the later batches of figures comes out vastly inferior in quality to the early batches. I don’t exactly understand the specifics of why that is. But many industry insiders have assured me that this is a common problem. In the case of Ramjet, I understand that he’s reworked quite a bit off the standard MP Seekers. But most of it is still the same, and I’m betting this mold is getting seriously old and worn down that the end product is just one lousy mess.

The real problem with the figure is in the construction (probably from the bad mold I just described). It’s most evident in the robot mode. Most of the joints are way too loose, especially in the legs. The arms ain’t much better. Supposedly, this figure was already delayed because of serious issues with the shoulder joints. Takara recalled the figure from the retailers, and they went back to the factory to be repaired. I don’t know, in the end they’re still kinda bad. I would hate to see how this was before the repairs. In robot mode, this figure does not feel like a cohesive whole in the least. The overall design also don’t help matters. This mold was meant to be for the standard Seekers, and modifying it for Conehead Seekers feels like a tacked on design choice. The head transformation is bizarre. The jet nosecone kind of just hangs off the back of the robot mode, and there’s nowhere to plug it like the standard Seekers. Coneheads have their wings on their legs, and doing that in this mode, the robot mode looks too bulky below the waist. Combine that with the awful construction and you get one jumbled disarray of a figure. Takara took the cheap route and decided to rework an existing mold. They should have re-designed the Coneheads from the ground up.

I do like MP Ramjet’s alt mode. It looks show accurate. Some of the transforming mechanism is worthy of recognition. I like how the missiles cover over the guns. Some of the wing and thrusters additions are quite neat. Everything else is what you have seen before. Below are some pics of the alt mode, since this is the better mode.

With Classic Ramjet

MP Ramjet is not at all recommended. The nice alt mode is not enough to save it from the painfully crappy robot mode. And when I think that I paid $179.99, it really hurts. You may want to consider ToyWorld Combuster (or Jets) if you are in the market for a MP sized Ramjet.

To this day I still don’t have a 2nd generation MP Starscream. I missed out on MP-11 when it was first released, and I never found the TRU exclusive US version in store. But I got a MP-11 re-issue on pre-order. I sincerely hope that this re-issue will be better built. Though I have heard that the TRU version is horribly flawed in construction… so I’m keeping my fingers crossed.

Third Party

The first of two awesome 3P figures this month is ToyWorld Muddy, their homage to Sludge. Just like Iron Dreg last month, I also bought Muddy on sale, and he was shipped to me this month. Out of the 4 TW dinos that I now have, Muddy is my favorite. This may be because I never had a Sludge figure. But Muddy is genuinely impressive. The dino mode is fantastic. I love how he looks as a brontosaurus. In robot mode he looks cool too. I had reservations at first, because I thought having the dino front legs hiding in the wings in robot mode would look weird. But having the figure in hand, it really doesn’t look bad at all. And because of that design, the transformation from dino to robot works really well. He’s fun to pick up and play. The transformation is not difficult by any means, but at the same time complex enough for older collectors. One common gripe among fans is that his sword is too small. Yes that is a legitimate complaint, but seeing as how it’s made to compact itself into the neck in dino mode, I’m willing to give TW a pass. Having room to account for all accessories in every mode is always a plus in my book. Like I said already, I think Muddy is the best TW Dinobot out of the 4 that I have. Corelock (Grimlock) has an awesome T-Rex mode, but his robot mode leaves a bit to be desired. Roar (Snarl) is a good figure, but his tail keeps coming off during transformation. And as for Iron Dreg (Slag), it feels like TW didn’t update him enough for today’s standards. Muddy is the only one out of the four where I don’t detect any obvious weaknesses. I like both his modes, he’s well built, transformation is fun, and he’s a good modern update that will do Sludge proud. Muddy is a figure that belongs in your collection.

I reserved the best for last. My fellow TransFans… I am proud to give you (drum roll please)… Carry! Yeah, that name doesn’t do it for me either. But this figure takes 3P TF engineering to new levels. Carry is a homage to Rodimus Prime by DX9. I touched on this figure when I did my purchase post for June 2016 (pictured with Alpha Pack). Hasbro/Takara has given us only one Masterpiece Rodimus Prime figure (MP-09). That figure was met with mixed reactions from fans. Earlier in 2016 there was a MP release for Hot Rod. This figure is awesome, but it’s Hot Rod and not Rodimus Prime. So there is certainly room on my shelf for a 3P Rodimus Prime in MP scale. DX9 answered the call… and the result is amazing. Both modes are great representations of Rodimus in Prime form. He scales nicely with other MPs. Construction of the figure is nothing short of superb. And the transformation engineering of this figure is where DX9 Carry really shines. It is times like these that I wish I did video reviews, because writing about the transformation really does not do it justice. DX9 implemented some very clever mechanisms in the way that Carry converts from vehicle to robot and back. The process is smooth and fluid. The mechanics proceed logically from one step to the next. The transformation is complex yet intuitive. There are lots of steps in the process, but you really don’t feel stuck at any one time in the overall paradigm. He’s a great figure to just pick up and play, and at the same time there’s enough going on that this figure easily classifies as MP. And unlike MP Rodimus Prime, Carry is able to transform from robot to truck without external attachments. The entire truck is wholly contained within the figure. And what’s more amazing is the size differential between robot and alt mode. Carry in alt mode is only about voyager size, but in robot mode he is fully MP size. Some fans have complained that he’s too small in alt mode, but I see this more as testament to the great engineering of the figure. Another minor nitpick from some fans is how his wings appear in robot mode. Personally it doesn’t bother me. Carry comes with a Targetmaster figure. This fig is ok, but in gun mode he can be too heavy for Carry to hold properly. I don’t think of Rodimus Prime as a Targetmaster anyway, so I usually have Carry use some other weapon. The rifle from CW Silverbolt is a good substitute. I got Carry on sale at $129.99, but even at the full retail of $169.99, he’s worth every penny. I give Carry the highest possible recommendations.

Arise, Rodimus Prime

Since there are so many TFs this month, I thought it would be fun to take some group pics. Check them out below! (And like I mentioned already above, no pics of Stripes. He’s coming next month… promise.)

The Autobots:

The Decepticons:

Titans have returned! Transform and Roll Out!

 

Around May of this year was when Age of Extinction toys started to appear. I started to see them in early May, but I wasn’t able to purchase any until late May. More on this later in the post. Here are my acquisitions for May.

• ToyWorld Hardbone, bbts.com, $69.99

• Age of Extinction High Octane Bumblebee, TRU, $14.99

• Age of Extinction Slug, Target, $14.24

• Age of Extinction Scorn, Target, $14.24

• Age of Extinction Evasion Mode Optimus Prime, Target, $23.74

Other than Hardbone, all figures are from Age of Extinction. The release of AoE toys finally ends a long retail TF drought that lasted for much of the year. I was happy to see some new figs on the shelves, but at the same time I knew that Hasbro’s focus on AoE figures would also equate to less attention on the Generations line, my favorite TF line from Hasbro. Still, seeing something I want on the shelf is always better than seeing nothing.

But before I get into AoE, let’s talk about Hardbone, ToyWorld’s homage to G1 Hardhead. I actually bought this figure late last year, around Thanksgiving I believe. BBTS was doing their Black Friday sale. Only thing I wanted from the sale is Hardbone. As a whole, I’m very impressed with figures from ToyWorld as I think they all have solid construction, nice design, good value, and G1-inspired aesthetics. And I saw good reviews of Hardbone on YouTube, so I wasted no time to buy one at the sale. I always use the Loot feature at BBTS, to save on shipping. However, between then and May, I bought nothing else from BBTS. Any item in the loot can only be held for 6 months, so in May I had to ship Hardbone. I was not disappointed when I received the figure. Both modes look nice and the figure is well built. Transformation is not anything revolutionary, but in this case the tried and true formula works. Hardbone has weapons galore. Obviously he’s got his big shoulder cannon, but the twin guns that he had in G1 are here as well. And TW included some extra weapon accessories for good measure. The Headmaster gimmick itself is not really improved upon for G1, but suffice to say that it’s there. Overall I think this figure is an excellent modern update of G1 Hardhead.

OK, now onto the Age of Extinction figures. In early May I first saw them at K-Mart. I found the first 4 deluxe figs from Wave 1, which are High Octane Bumblebee, Crosshairs (not pictured), Slug, and Scorn. I tried to buy Slug and Scorn, but at checkout they would not ring up a price. So they wouldn’t sell them! K-Mart said they were put on the shelves by mistake. Lame! Anyway, less than 2 weeks later I found them elsewhere (and pretty much everywhere).

When I first saw the AoE figs, I definitely wanted the Dinobots. Robots transforming into Dinosaurs are some of the best ideas Takara has came up with, and the G1 creators were smart enough to personify them as the bad asses that they are. So I’m kinda surprised that Hasbro doesn’t milk this more by making Dinobots all the time, in whatever is the active TF continuity. At least for the 4th movie, Michael Bay was smart enough to include them (minor SPOILER ALERT, highlight over the next sentence to see: they only appear at the very end, for about 15 minutes. LAME!). Anyway, as for the figures themselves, I like Scorn. He’s my favorite of all the deluxe Dinos released so far. I like both the dino mode and the robot mode. Slug is ok. He’s obviously a homage to G1 Slag, being a triceratops and having a oh-so-clever name change. These movie dinos sure are colorful, like Power Rangers. In the movie they are more metallic looking, like G1 Dinobots. I bet in the future Hasbro will make limited editions of these guys in movie colors.

I like the Bumblebee figure. At the core, he’s not anything that we haven’t seen before in a movie Bumblebee. But I’m digging the classic muscle car (it could be a classic Camaro, but I could be wrong). The only other time they made a classic car movie Bee was in the first movie (which I have and broke), so it’s good to see him in this form again after all the modern Camaro Bees.

Last but not least, there’s Evasion Mode Optimus Prime. When I first saw preview pics of this figure, I was beyond thrilled. That alt mode is so G1 it would be illegal for me to not get one. The robot mode is still has the signature Michael Bay look, but with more G1 aesthetics and colors (though in the movie he does not appear in these colors). The transformation of this piece is actually very refreshing. The legs are kinda the same as always for Prime figs, but the upper body transformation utilizes quite a interesting twist. It’s as if the cab folds inside out on all sides to form the upper torso. The result is a nice movie-verse figure that mixes well with G1. I recommend this Prime, and with this upcoming aftermarket accessory to make him look like Powermaster Optimus, I say all G1-ers should get this fig.

That’s all for now. Age of Extinction has arrived… Transform and Roll Out.