2018 is starting off with a bang. Power of the Primes is in full swing. Some nice 3P products and one Masterpiece figure adds to this month’s collection to start the new year right.

• Power of the Primes Micronus, Target, $4.99
• Power of the Primes Liege Maximo, Target, $4.99
• Power of the Primes Vector Prime, Target, $4.99

• Power of the Primes Grimlock, amazon.com, $24.99

• Power of the Primes Slug, Walmart, $16.82

• Power of the Primes Swoop, Walmart, $16.82

• Titans Return Arcee, toysrus.com, $24.99
• Titans Return Grotusque, toysrus.com, $24.99

• Power of the Primes Evolution Optimus Prime, Target, $44.99

• Power of the Primes Evolution Rodimus Prime, Target, $44.99

• Masterpiece Sunstreaker, amiami.com, ¥9959 (about $91.48)

• Dr. Wu Blue Skybreaker Sword, tfsource.com, $17.99

• DX9 Gewalt, tfsource.com, $139.99

Micronus, Liege Maximo, Vector Prime

I like the Prime Masters. For those that don’t know, Prime Masters are the master class figures that came released as part of the Power of the Primes line. The master figures can go inside an exo-suit, and the exo-suit transforms into a weapon. G1-ers can think of them as a Targetmaster and Pretender rolled into one.

In my opinion, the Prime Masters are countless times superior to Titan Masters. Titan Masters are the modern day equivalent of Headmasters, but the accessory that comes with them are so lame. With Prime Masters, Hasbro actually made Pretenders cool. Didn’t think I would live to see this day.

The 3 Prime Masters below are Micronus, Liege Maximo, Vector Prime. Though G1-ers will instantly recognize they are using the Pretender shells of Cloudburst, Skullgrin, and Metalhawk. Good to see that Hasbro did not forget their G1 roots. As a sidebar, I still have my Couldburst and Skullgrin from G1, in pretty good shape too.

In the pic below, the Prime Masters are inside the outer shell.

All transformed to weapons, shown in the pic below. Notice the Prime Master of each figure is transformed into a block attached on top of the weapon. You could do this or just leave them inside in weapon mode.

Overall, I highly recommend the Prime Masters. They are fun to play with and their weapon modes serve a real purpose.

Grimlock, Slug, Swoop

Power of the Primes finally gives us some G1-worthy updates of the Dinobots. And I don’t just mean Grimlock. PotP is doing the whole team. Purchased this month are Grimlock, Slug (Slag), and Swoop. Below I have them in their dino modes.

As a whole, these Dinobots are not too shabby. They are true G1 derivatives, updated for this modern era. However, in my last post, I did mention that this PotP Grimlock pales in comparison to the many 3P offerings that are available today. If you have bought any of them, you will find that these PotP Dinobots simply don’t compare in quality or aesthetics. But on the other hand, you can’t get better G1-esque Dinobots for the price. Grimlock is only about $25, the rest about $17. Hasbro is offering a way to get decent upgrades of G1 Dinobot characters without breaking the bank.

The pic above shows off Grimlock, Slug (Slag), and Swoop. They each look solid in their dino mode, and in robot mode (not pictured) they look just as good too. Transformation of each of these is on the simple side, with obvious transformation schemes for anyone familiar with G1 and CHUG. When complete, the 5 figures will combine. I kinda wish they didn’t do this, as implementing the combination mechanics means putting restrictions on other aspects of the figure, such as the dino modes, robot modes, and sizes of the figures. Grimlock at voyager size is fine, but I do with the other Dinobots are bigger than deluxe.

Overall, I recommend these. Sure they’re not as good as the 3P stuff out there, but Hasbro hasn’t done anything this G1 for the Dinobots in, like, never. Do them a solid and show that you appreciate this effort by buying them.

Arcee and Grotusque

Arcee and Grotusque are Toys R Us exclusives. This was the last online purchase I made from Toys R Us, before they went belly up. To this day I still have not opened these. It’s mostly because I love the packaging that they come in, that I don’t want to ruin it. And these are both repaints, so it’s not like I haven’t seen the mold. Arcee is a repaint of TR Brainstorm and TR Blurr. Grotusque is a repaint of Twinferno. I am more inclined to open Grotusque, to complete my Monsterbots (I will have Repugnus in a later month).

I will show off how they look in the cool packaging. Pics below.

Each of these figs come with two Titan Masters. Grotusque comes with Scorponok and Fengul, and Arcee comes with Ultra Magnus and Leinad. What kind of name is Leinad? It’s Daniel spelled backwards. Oh what will these crazy Hasbro writers think of next.

Optimus Prime and Rodimus Prime

Toward the end of the month, I started my paternity leave. Having a baby changes your life. The wife sent me to Target for some baby stuff one Saturday night. I welcomed the opportunity as it allowed me to get out of the house. But more importantly, it gave me a chance to hunt for some TFs. I love my daughter, but anyone who’s had a baby will tell you that you need to do some stuff that reminds you of the person you were prior to the baby. For me, hunting for TFs satisfy that requirement. That, and writing in this blog.

But back to the topic at hand. On this trip to Target, I found Evolution Optimus Prime and Rodimus Prime. Both are leader class figs, and both have the “Evolution” tag written above their names. This is because both figs include a smaller fig that represents their persona before taking on the mantle of Autobot leadership: Orion Pax for Optimus, and Hot Rod for Rodimus.

Let’s look at Optimus first. He looks great in the box. At Target I was astonished how close he looks to MP-10 Optimus. After I opened the figure and had him side by side with MP-10 (and I should have taken a pic of this), I was amazed at how much Evolution OP resembles MP-10. The two are about the same size. In your hands, MP-10 weights quite a bit more than Evolution OP. But the details and the paint job of Evolution OP is on par with the MP figure. I’m especially impressed with the head mold of Evolution OP, it’s MP quality.

To transform, the smaller figure detaches from the rest through the back. This smaller figure transforms into the cab, while the rest of the body forms the trailer. Think of how G1 Ultra Magnus or Powermaster Optimus Prime does it. Picture below.

Obviously the cab can detached from the trailer. The cab can then transform into Orion Pax by itself. The whole things sounds gimmicky, but Evolution OP implements all this very well. A review is definitely in order and I plan to do one soon.

Rodimus Prime has all the similar features. It’s packed in robot mode just like Optimus. Rodimus is a bit more of a puzzle former, and he does remind of the FansProject Protector upgrade kit designed for Classics Rodimus. To transform, you first detach Hot Rod from the rest of the figure. Hot Rod will transform into the front cab, while the body forms the trailer. Pic below.

The front cab will come out as the Hot Rod race car. And this can transform into Hot Rod. All in all, I like this figure too. I recommend both the Evolution leader figures. They are not perfect, but they offer very good alternatives to buying MP versions of these characters at affordable prices. And for both of them, you get two characters in one package. Oh, and they both come with Matrix holders where you can plug Titan Masters into them.

Sunstreaker

MP Sunstreaker was pre-ordered months ago. During my paternity leave, it finally showed up on my doorstep (or maybe it was in the mailbox). He is packaged in car mode like all the other MP cars. And you would expect this to scale well with all other MP cars, especially Sideswipe.

I looked through all my pics, and I guess I didn’t take any of Sunstreaker by himself in alt mode. I can only find pics of him and Sideswipe, so here they are. Notice how well they scale together.

I cannot be happier with the alt mode of Sunstreaker. The Lamborghini alt mode is just as good as Sideswipe’s, and the scale is so on par. He is in his trademark yellow, and his iconic rear mounted engines is proof of having a “Super Tuning” Lamborghini alt mode.

MP Sunstreaker is VERY VERY IMPRESSIVE from an engineering perspective. The transformation is something to behold. And yes, he is difficult. I used instructions because I’m always worried that I’ll break something for such a complicated piece, but it is possible to do it without them if you’re looking for a challenge. I only transformed him once, from car to robot. So I don’t remember it too well now as I write this. But I do remember there were a lot of steps, and I that the backpack transforming sequence is simultaneously awe-inspiring and demanding. Sunstreaker is definitely not a figure that you actively play often to transform it over and over. But when you are finally done, it is so rewarding. Check out the awesome looking robot mode.

Sunstreaker is well built. All joints are nice and tight. In robot mode he scales well with other MP Autobot cars. He can be put into some nice action poses.

Great face sculpt worthy of the handsome Autobot.

Below are shots of the backpack. A lot goes on to get the backpack in this configuration, and this is a testament to the engineering brilliance of this figure. Those that like to nit-pick could argue there’s a bit of junk here, the backpack is quite thick when viewed from the side. But when you consider how much of the alt mode is folded into this, I can easily overlook this minor distraction. The rest of Sunstreaker is completely kibble-free.

Sunstreaker can store his pistol on the back. He also comes with a Chip Chase figure. MP Sunstreaker is not too playable because of the high difficulty, but as a collector piece he gets my highest possible recommendation.

Blue Skybreaker Sword

I got the Blue Skybreaker Sword to push my order over $150 to get free shipping (the order was this and Gewalt, below). I chose this accessory because I still need a sword to go with my TF Prime Beast Hunter Optimus Prime. The stock sword is broken, and the handle is stuck in his right fist. The story of that incident is documented here. As soon as I can get that handle out, I will consider this figure repaired and using this better sword. See the pic above in all its shiny blue glory. I can’t wait for OP to try this sword in his robot mode.

Gewalt

Last but certainly not least, we have Gewalt, DX9’s homage to Blitzwing. And I’ll get straight to it: Gewalt is awesome! As of this writing, there has been some attempts at a MP Blitzwing by various 3Ps. DX9 Gewalt is by far the best, and the preferred MP Blitzwing by most hard core fans. Fans Toys does have their offering coming up, but that’s been on pre-order for more than 2 years now and to this day still no real pics other than computer renders. FT usually has me impressed, but I got sick of waiting for them. Gewalt is so thoroughly spectacular that FT needs to come up big for me to consider their interpretation of Blitzwing.

Gewalt is German for violence, if any of you are wondering. He comes packed in tank mode, and for good reason. The tank mode is the most compact mode, and thus easy to fit into the box. The tank mode is good, and I should have took a pic. However, I would consider the tank mode the weakest of the 3 modes. Gewalt really shines in his 2 other modes. Consider the jet mode below.

Now that is Blitzwing! This is the MiG-25 that he was meant to be. Yes I know some G1 purists will bash it for not having the thick tank-kibble wings that he had in G1, but c’mon. The wings in that shape was nasty and in no way reflect how a MiG-25 looks. They only looked like that because of the toy limitations in the 80s. Gewalt’s jet mode is a vast improvement and updates this alt mode to modern MP standards.

The colors in this mode are unmistakably Blitzwing. I have a pic above showing off Gewalt in jet mode next to ToyWorld Requiem (or Elegy, as he is sometimes called). Gewalt is a big figure, but scales nicely with other MPs.

Now for his robot mode. Check it out:

Now if that’s not Blitzwing, than I don’t know what is. The way he looks, it’s like he stepped straight out of the G1 Movie. Blitzwing got a decent amount of screen time in the movie, up til the fracas inside Astrotrain after the injured Decepticons were jettisoned.

Articulation for Gewalt is pretty good. And the figure is so well built that he can hold all those poses. Gewalt’s transformation does test your abilities as a TransFan. I won’t say it’s difficult, like say Sunstreaker, but it’s certainly not easy. I only transformed it once from tank to jet, then again from jet to robot. I’m not sure I will be able to go back without looking at the instructions. But that’s a challenge for another day.

For accessories, he comes with his rifle, his sword, the tank cannon (which can be removed), an extra screaming face, and some extra waist parts (I’m not entirely sure that they’re waist parts, and I don’t know if they go on Gewalt or some other DX9 figure).

Here I have a pic of Gewalt with a fabulous rub-on faction decal.

That’s all the items for the month. Again, 2018 started with a bang, with so many figures. And they’re all quality products too. The only two pieces here that I would possibly not recommend is Arcee and Grotusque, and I only say that because they’re repaints. I recommend everything else. It’s a good time to be a TransFan.

Transform and Roll Out!

 

Some very good items were purchased in August of 2017.

• Optimus Prime Autobot Legacy 2-Pack (Amazon Exclusive), amazon.com, $29.99

• The Last Knight Hound, Walmart, $26.86

• ToyWorld Assault, Combuster, Requiem, tfsource.com, $159.99

Optimus Prime and Orion Pax

I’m not sure what is the official name of this 2-Pack. This Amazon exclusive is officially listed on their website as Optimus Prime Autobot Legacy 2-Pack. I have seen it listed elsewhere as the Optimus Prime Evolution Pack. There is also the name of Transformers Tribute written on the upper left corner of the box. And I’m not sure if this falls under Titans Return, Power of the Primes, or something else. But whatever it’s called, it’s a good 2-Pack to have.

Both figures in the set are repaints. As of this writing, I have not opened the set. The Optimus Prime figure is a repaint of War For Cybertron Optimus Prime. I see some minor paint app differences between this release and the WFC figure, and I’m gonna assume everything else is the same. Do not underestimate the complexity of this deluxe figure. If I am to compile a top 10 most difficult Transformers list today, this figure would easily make the list. The Orion Pax figure is a repaint of Titans Return Kup. This is an excellent mold to be re-used as Orion Pax.

Buy this set if you don’t have either of the figures used as the base for the repaint. But even if you do, this set is still worth getting. There has not been that many Orion Pax figures made. Not counting this one, I only recall two others. One in Generations Thrilling 30, and another as the base figure in the Leader Class Evolution Optimus Prime that will be released in the Power of the Primes line. This 2-Pack adds another Orion Pax to your collection and that alone is worth the price of admission.

Hound

This is my second figure from The Last Knight. TLK gave us another excellent Hound figure, after the superb Hound we got from Age of Extinction.

The figure comes packed in robot mode. In this mode, he’s a bit stocky, but that may more accurately reflect his movie proportions. Arm articulation is decent, but there’s not that much going on in the head, chest, or legs. The front wheels of the vehicle mode transforms into the feet. This makes standing the figure somewhat challenging. Not impossible, but you will have to balance Hound just right if you want to get him into any kind of action pose.

He comes with five pieces of weapons: 2 pistols, 2 heavy rifles, and 1 weapons connector type thing. There are many ways to assemble and configure this assortment.

Transformation of TLK Hound is where this figure truly shines. The overall transformation mechanism is one of the most unique I have seen in some time. I mentioned that the feet becomes the front wheels, but worth mentioning are other engineering feats besides the feet (pun intended). The legs collapse in an impressive way too complicated to explain in words. The arms are placed bent in alt mode and it works. The entire package is well constructed. When done right, the alt mode feels like a cohesive whole.

TLK Hound looks a bit different from AoE Hound in alt mode. I don’t know if either is movie accurate, and I won’t bother looking into it because both movies pretty much suck. AoE Hound is more of a van, while TLK Hound is more of a pick-up truck with a scary big missile launcher attached on top of the bed. TLK Hound is in a lighter shade of green, which seems a bit more movie accurate as far as I know.

TLK Hound appears below with other TLK figs Barricade, Drift, and Bumblebee.

Overall, I like TLK Hound. The transformation is unique, and the alt mode comes together well. TLK Hound doesn’t sport as many weapons as his AoE counterpart, but what’s there is more than sufficient.

I should note that the Japanese version of this figure comes with a riot shield. And I’m guessing the shield goes over the bed of the truck in alt mode. But since I don’t have that version, I’m not able to say if that significantly enhances TLK Hound in any way.

Some will inevitably ask which is the better Hound. In my opinion, AoE Hound is superior. AoE Hound is sleeker looking, has more weapons, and a robot mode that is easier to stand on. But these two figures are different enough that comparing the two is like comparing apples and oranges. If you like movie figures, get them both.

Requiem, Assault, and Combuster

Every once in a while, you find a deal so awesome that you immediately jump on it’s purchase. That was the case with this set of Masterpiece style Conehead Seekers from ToyWorld. They usually retail for a bit over $100 each. So at $159.99 for the set of 3, I wasted no time clicking on that “Buy” button and made sure this online transaction entered the vendor’s system. This was a Labor Day sale. It didn’t take long before this set sold out at this amazing price.

I have documented my long and utter disappointment with the official MP Conehead Seekers, back in this post. So I won’t rant again here. The only thing worth repeating is that they suck, and no self-respecting TransFan should spend any of their hard earned money on such garbage. I have since sold MP Ramjet, and have been looking for 3rd party substitutes for the Coneheads. Thus I’ve had my eye on this set for some time now. Seeing this spectacular deal, I acted with haste.

My fellow TransFans, this is the set of MP Coneheads that you should have in your Decepticon forces. TW gave us a completely new design on MP Coneheads that has far surpassed all my expectations. I touched a bit on the sheer brilliance of these figures in this post about Decepticon air superiority, but some of that is worth repeating here. But before that, let’s take a look at the jet mode, which is what the figures come packed in.

ToyWorld Requiem (Dirge) in his beautiful jet mode.

ToyWorld Assault (Thrust) in his beautiful jet mode.

No scale issues with official MPs in jet mode.

Assault and Combuster in jet mode.

Now let’s look at the robot mode.

All 3 look excellent in robot mode. Nice and slender build, unlike the fat bulky MP Coneheads.

Each figure comes with 2 black display panels that can connect both vertically and horizontally. In these pics I am using all 6. They are also used in the pic above for Hound and the other cars.

In robot mode, the TW Coneheads are quite a bit taller than official MPs.

The TW Coneheads really deserve a review in a separate post, but I’m gonna give some quick thoughts here:

• Both modes look good – no complaints from me as far as the appearance of both jet and robot modes; see the pics for yourself
• Amazing build and construction – nice and tight joints, no quality issues here like the MP Seekers
• Great materials used – these figures feel solid and heft, and by comparison the MP Seekers feel cheap and sloppy
• Excellent design and engineering – an intuitive and enjoyable transformation that is many times superior to official MPs
• Each figure comes with 2 black display panels – TW didn’t have to include this but it’s a great addition
• Front landing gear of each jet and be hard to get out, but that’s a minor complaint
• Requiem (Dirge) and Combuster (Ramjet) come with firing missiles – and they FIRE! Careful not to lose them, they shoot pretty far
• Cockpits open in jet mode
• No scale issues in jet mode with official MPs
• In robot mode, TW Coneheads don’t scale so well; they are a tad taller than official MPs, which may be a turn off for some (see above pic)
• When you have all three and assemble the boxes, they form a nice big image

There is much more I should mention about this set, but I’ll reserve that for my review. I give the TW Coneheads the highest possible recommendation, and that’s the bottom line. If you are looking for Masterpiece style Coneheads for your collection, look no further.

Transform and Roll Out.
 

There are quite of bit of figures taking up room on my shelf. Before I put them away, I’ll give them their 15 minutes of fame and feature them in a post.

Same pic, different angle.

From left to right
Top shelf, in robot mode: MMC Bovis, TFP Beast Hunters Shockwave, Fans Toys Quakewave, Masterpiece Acid Storm, Generations FOC Thundercracker
Top shelf, in alt mode: Generations Megatron, Generations FOC Kickback, Generations Blitzwing, TFP Breakdown, TFP Silas Breakdown, Generations FOC Shockwave
Middle shelf: Generations Orion Pax, Generations Bumblebee, Generations Springer, Generations Sandstorm, TFP Beast Hunters Optimus Prime, TFP Beast Hunters Ultra Magnus, , Generations Hoist, Generations Trailcutter
Bottom shelf: Masterpiece Prowl, Masterpiece Streak, Generations Blurr, ToyWorld Trace, ToyWorld Aurora

Can you tell who it is the oldest figure on here? That’s right, it is Blurr. I believe he was released 2010. I dug him out recently for display because he’s such an awesome fig!

With the exception of Blurr, Breakdown, and FOC Shockwave, all figures on here were acquired in 2013.

4 figures are from third parties: MMC Bovis, Fans Toys Quakewave, ToyWorld Trace, and ToyWorld Aurora.

There are 3 Masterpiece figures: Acid Storm, Prowl, and Streak. Though one could certainly make a case for Quakewave. He’s a third party fig, but he fits into the MP toys just fine.

OK, time to make more room for the figs of 2014. Into the closets these will go. Transform and Roll Out.

Here is what I currently have on display.

Same pic, different angle.

From left to right
Top shelf, in alt mode: TFP Breakdown, TFP Silas Breakdown, TFP Beast Hunters Shockwave, Generations Blitzwing, TFP Dreadwing, Generations Megatron
Top shelf, in robot mode: Fans Toys Quakewave, MP Soundwave with Laserbeak
Middle shelf: Generations Bumblebee, Generations Springer, Generations Sandstorm, TFP Beast Hunters Optimus Prime, TFP Beast Hunters Ultra Magnus, Generations Trailcutter, Generations Orion Pax

Most of the Transformers in this group I would highly recommend. Each figure is a worthy purchase that any TransFan would be happy to include in his collection. The two Breakdown figures are some of the best to come out of the TF Prime line. MP Soundwave is considered by many to be the best MP figure ever made. Generations Springer and Sandstorm are nothing short of spectacular, and I dare argue that, for the first time ever, Hasbro has done triple changers right with these two. Trailcutter has finally arrived to the CHUG party, but better late than never. And for the first time in TF history, Hasbro made a Orion Pax figure. This figure is still a pretty rare find as of this writing.

Quakewave by Fans Toys is absolutely amazing! This is a 3rd party Shockwave homage that scales incredibly well with the MP line (check him out next to MP Soundwave). Construction of the figure is very solid, and the mechanical design of this toy is on par with any MPs that Hasbro and Takara has come up with. He looks good in both modes. Transformation is fun without being overly complex. Price is also reasonable at $150. The LED gimmicks (in both eye and cannon arm) are very cool.

The only two figures that may be debatable is Bumblebee and Blitzwing. Blitzwing has the shoulder-non-locking construction issue that all fans are aware of by now. And Bumblebee, despite being a brand new mold, feels too similar to past figures of the same character. But even with these flaws, I still recommend them. Blitzwing’s problems can be remedied with just a little bit of work. And if for some reason you don’t own any Movie-verse or TF Prime Bumblebees, then this new figure should feel very refreshing for you.

Some of these figs have been on the shelf for a while. They’ve had their 15 minutes, so back to the closets they go to make more room. I expect my next post like this to appear very different. Til then… Transform and Roll Out.

I usually try to make at least 4 blog posts a month. Look to the lower right in Archives and you will see I’ve been doing that all year. But that trend stopped in July. I certainly did not intend to ignore Transformers Roll Out for so long. I’m still very much into Transformers, and I hunt for figures whenever and wherever I can. But life has a habit of getting in the way. I’ve been busy, mostly the good kind of busy. For the first time in a long time, I feel like my life is moving forward. Still, all this translates to me not having enough time for this blog.

At the very minimum, I need to report my purchases for July. Much like May of this year, I didn’t find any TFs til late in the month. I really was beginning to think July would be a Transformer-less month, then in the final week the figures took me by storm. Here they are.

• Generations Thrilling 30 Sandstorm, amazon.com, $22.99

• Generations Thrilling 30 Trailcutter x 2, Target, $12.99 each
• Generations Thrilling 30 Megatron, Target, $12.99
• Generations Thrilling 30 Orion Pax, Target, $12.99
• Generations Thrilling 30 Bumblebee, Target, $12.99

• Generations Fall of Cybertron Roadbuster, Walmart, $12.97
• Generations Fall of Cybertron Twintwist, Walmart, $12.97
• Generations Fall of Cybertron Topspin, Walmart, $12.97
• Generations Fall of Cybertron Impactor, Walmart, $12.97
• Generations Fall of Cybertron Whirl, Walmart, $12.97

That’s a total of 11 figures for July, all from Generations. So far I only opened Orion Pax and one of the Trailcutters.

I first spotted Sandstorm late in the month on Amazon. I wasted no time getting him. I heard nothing but rave reviews for him, and the recent Hasbro Triple Changers have been awesome. I assumed Sandstorm is a brand new mold. It wasn’t until after I bought him I learned that he’s a rework of Trilling 30 Springer. I say rework because saying repaint feels like such a injustice. The two figures are off the same general mold, but Hasbro made so many differences off the Springer mold that Sandstorm feels like a completely different figure. I haven’t opened Sandstorm yet. But if he’s anything like Springer, I will like him.

On July 25th, I went to a Oakland A’s game with the GF. On the way back from the game, I stopped by Walmart for some snacks since I was seriously hungry. Lo and behold, I find the Generations Wreckers in the toy aisle! They had exactly one set. I must have got there right after they stocked it. Anyway, I grabbed them all with a quickness. The figures are repaints of the FOC Combaticons. These Wreckers will combine into Ruination, though I don’t ever recall Wreckers combining in any continuity. Getting more repaints of this set kind of feels like a waste of money, but the purchase is justified by the fact that these figs all have new head molds that very closely resembles their G1 counterparts. The GF really likes the colors of Roadbuster.

The very next morning, I had a work conference to attend in a nearby city. After the conference was over, I stopped by the Target right next to it. I’m glad I did, because I found all the Thrilling 30 deluxe wave 1 figures. I knew these were coming, but I wasn’t expecting to find them so soon. They had exactly 2 sets. Again, I must have got there right after someone stocked the TF aisle. I grabbed one whole set, plus one extra Trailcutter. I’m partial to Trailbreaker, so can you blame me for getting two Trailcutters? If you live near me, I guess you can. I really like how these Thrilling 30 deluxe figures all come with a comic. The way these deluxe figs are packed looks awesome too! Poor Megatron, he’s the lone Decepticon of the set. In fact, he’s the lone Decepticon for the month!

I should also mention that I passed up several TF Prime Beast Hunter figures this month. I found Skystalker, Target exclusive Darksteel (Grimwing repaint), and Target exclusive Sky Lynx (Skystalker repaint). I almost bought all these guys just for the sake of buying some TFs, but ultimately left them on store shelves. I’m glad I did, because the Generations figs showed up immediately after.

There you have it… my TFs for July 2013. I should have more TFs next month too, since I just had some 3rd party stuff shipped from tfsource. A number of pre-orders are slated to come in next month. I’m keeping my fingers crossed. It will be a good August. Until then, Transform and Roll Out!