2018 is starting off with a bang. Power of the Primes is in full swing. Some nice 3P products and one Masterpiece figure adds to this month’s collection to start the new year right.

• Power of the Primes Micronus, Target, $4.99
• Power of the Primes Liege Maximo, Target, $4.99
• Power of the Primes Vector Prime, Target, $4.99

• Power of the Primes Grimlock, amazon.com, $24.99

• Power of the Primes Slug, Walmart, $16.82

• Power of the Primes Swoop, Walmart, $16.82

• Titans Return Arcee, toysrus.com, $24.99
• Titans Return Grotusque, toysrus.com, $24.99

• Power of the Primes Evolution Optimus Prime, Target, $44.99

• Power of the Primes Evolution Rodimus Prime, Target, $44.99

• Masterpiece Sunstreaker, amiami.com, ¥9959 (about $91.48)

• Dr. Wu Blue Skybreaker Sword, tfsource.com, $17.99

• DX9 Gewalt, tfsource.com, $139.99

Micronus, Liege Maximo, Vector Prime

I like the Prime Masters. For those that don’t know, Prime Masters are the master class figures that came released as part of the Power of the Primes line. The master figures can go inside an exo-suit, and the exo-suit transforms into a weapon. G1-ers can think of them as a Targetmaster and Pretender rolled into one.

In my opinion, the Prime Masters are countless times superior to Titan Masters. Titan Masters are the modern day equivalent of Headmasters, but the accessory that comes with them are so lame. With Prime Masters, Hasbro actually made Pretenders cool. Didn’t think I would live to see this day.

The 3 Prime Masters below are Micronus, Liege Maximo, Vector Prime. Though G1-ers will instantly recognize they are using the Pretender shells of Cloudburst, Skullgrin, and Metalhawk. Good to see that Hasbro did not forget their G1 roots. As a sidebar, I still have my Couldburst and Skullgrin from G1, in pretty good shape too.

In the pic below, the Prime Masters are inside the outer shell.

All transformed to weapons, shown in the pic below. Notice the Prime Master of each figure is transformed into a block attached on top of the weapon. You could do this or just leave them inside in weapon mode.

Overall, I highly recommend the Prime Masters. They are fun to play with and their weapon modes serve a real purpose.

Grimlock, Slug, Swoop

Power of the Primes finally gives us some G1-worthy updates of the Dinobots. And I don’t just mean Grimlock. PotP is doing the whole team. Purchased this month are Grimlock, Slug (Slag), and Swoop. Below I have them in their dino modes.

As a whole, these Dinobots are not too shabby. They are true G1 derivatives, updated for this modern era. However, in my last post, I did mention that this PotP Grimlock pales in comparison to the many 3P offerings that are available today. If you have bought any of them, you will find that these PotP Dinobots simply don’t compare in quality or aesthetics. But on the other hand, you can’t get better G1-esque Dinobots for the price. Grimlock is only about $25, the rest about $17. Hasbro is offering a way to get decent upgrades of G1 Dinobot characters without breaking the bank.

The pic above shows off Grimlock, Slug (Slag), and Swoop. They each look solid in their dino mode, and in robot mode (not pictured) they look just as good too. Transformation of each of these is on the simple side, with obvious transformation schemes for anyone familiar with G1 and CHUG. When complete, the 5 figures will combine. I kinda wish they didn’t do this, as implementing the combination mechanics means putting restrictions on other aspects of the figure, such as the dino modes, robot modes, and sizes of the figures. Grimlock at voyager size is fine, but I do with the other Dinobots are bigger than deluxe.

Overall, I recommend these. Sure they’re not as good as the 3P stuff out there, but Hasbro hasn’t done anything this G1 for the Dinobots in, like, never. Do them a solid and show that you appreciate this effort by buying them.

Arcee and Grotusque

Arcee and Grotusque are Toys R Us exclusives. This was the last online purchase I made from Toys R Us, before they went belly up. To this day I still have not opened these. It’s mostly because I love the packaging that they come in, that I don’t want to ruin it. And these are both repaints, so it’s not like I haven’t seen the mold. Arcee is a repaint of TR Brainstorm and TR Blurr. Grotusque is a repaint of Twinferno. I am more inclined to open Grotusque, to complete my Monsterbots (I will have Repugnus in a later month).

I will show off how they look in the cool packaging. Pics below.

Each of these figs come with two Titan Masters. Grotusque comes with Scorponok and Fengul, and Arcee comes with Ultra Magnus and Leinad. What kind of name is Leinad? It’s Daniel spelled backwards. Oh what will these crazy Hasbro writers think of next.

Optimus Prime and Rodimus Prime

Toward the end of the month, I started my paternity leave. Having a baby changes your life. The wife sent me to Target for some baby stuff one Saturday night. I welcomed the opportunity as it allowed me to get out of the house. But more importantly, it gave me a chance to hunt for some TFs. I love my daughter, but anyone who’s had a baby will tell you that you need to do some stuff that reminds you of the person you were prior to the baby. For me, hunting for TFs satisfy that requirement. That, and writing in this blog.

But back to the topic at hand. On this trip to Target, I found Evolution Optimus Prime and Rodimus Prime. Both are leader class figs, and both have the “Evolution” tag written above their names. This is because both figs include a smaller fig that represents their persona before taking on the mantle of Autobot leadership: Orion Pax for Optimus, and Hot Rod for Rodimus.

Let’s look at Optimus first. He looks great in the box. At Target I was astonished how close he looks to MP-10 Optimus. After I opened the figure and had him side by side with MP-10 (and I should have taken a pic of this), I was amazed at how much Evolution OP resembles MP-10. The two are about the same size. In your hands, MP-10 weights quite a bit more than Evolution OP. But the details and the paint job of Evolution OP is on par with the MP figure. I’m especially impressed with the head mold of Evolution OP, it’s MP quality.

To transform, the smaller figure detaches from the rest through the back. This smaller figure transforms into the cab, while the rest of the body forms the trailer. Think of how G1 Ultra Magnus or Powermaster Optimus Prime does it. Picture below.

Obviously the cab can detached from the trailer. The cab can then transform into Orion Pax by itself. The whole things sounds gimmicky, but Evolution OP implements all this very well. A review is definitely in order and I plan to do one soon.

Rodimus Prime has all the similar features. It’s packed in robot mode just like Optimus. Rodimus is a bit more of a puzzle former, and he does remind of the FansProject Protector upgrade kit designed for Classics Rodimus. To transform, you first detach Hot Rod from the rest of the figure. Hot Rod will transform into the front cab, while the body forms the trailer. Pic below.

The front cab will come out as the Hot Rod race car. And this can transform into Hot Rod. All in all, I like this figure too. I recommend both the Evolution leader figures. They are not perfect, but they offer very good alternatives to buying MP versions of these characters at affordable prices. And for both of them, you get two characters in one package. Oh, and they both come with Matrix holders where you can plug Titan Masters into them.

Sunstreaker

MP Sunstreaker was pre-ordered months ago. During my paternity leave, it finally showed up on my doorstep (or maybe it was in the mailbox). He is packaged in car mode like all the other MP cars. And you would expect this to scale well with all other MP cars, especially Sideswipe.

I looked through all my pics, and I guess I didn’t take any of Sunstreaker by himself in alt mode. I can only find pics of him and Sideswipe, so here they are. Notice how well they scale together.

I cannot be happier with the alt mode of Sunstreaker. The Lamborghini alt mode is just as good as Sideswipe’s, and the scale is so on par. He is in his trademark yellow, and his iconic rear mounted engines is proof of having a “Super Tuning” Lamborghini alt mode.

MP Sunstreaker is VERY VERY IMPRESSIVE from an engineering perspective. The transformation is something to behold. And yes, he is difficult. I used instructions because I’m always worried that I’ll break something for such a complicated piece, but it is possible to do it without them if you’re looking for a challenge. I only transformed him once, from car to robot. So I don’t remember it too well now as I write this. But I do remember there were a lot of steps, and I that the backpack transforming sequence is simultaneously awe-inspiring and demanding. Sunstreaker is definitely not a figure that you actively play often to transform it over and over. But when you are finally done, it is so rewarding. Check out the awesome looking robot mode.

Sunstreaker is well built. All joints are nice and tight. In robot mode he scales well with other MP Autobot cars. He can be put into some nice action poses.

Great face sculpt worthy of the handsome Autobot.

Below are shots of the backpack. A lot goes on to get the backpack in this configuration, and this is a testament to the engineering brilliance of this figure. Those that like to nit-pick could argue there’s a bit of junk here, the backpack is quite thick when viewed from the side. But when you consider how much of the alt mode is folded into this, I can easily overlook this minor distraction. The rest of Sunstreaker is completely kibble-free.

Sunstreaker can store his pistol on the back. He also comes with a Chip Chase figure. MP Sunstreaker is not too playable because of the high difficulty, but as a collector piece he gets my highest possible recommendation.

Blue Skybreaker Sword

I got the Blue Skybreaker Sword to push my order over $150 to get free shipping (the order was this and Gewalt, below). I chose this accessory because I still need a sword to go with my TF Prime Beast Hunter Optimus Prime. The stock sword is broken, and the handle is stuck in his right fist. The story of that incident is documented here. As soon as I can get that handle out, I will consider this figure repaired and using this better sword. See the pic above in all its shiny blue glory. I can’t wait for OP to try this sword in his robot mode.

Gewalt

Last but certainly not least, we have Gewalt, DX9’s homage to Blitzwing. And I’ll get straight to it: Gewalt is awesome! As of this writing, there has been some attempts at a MP Blitzwing by various 3Ps. DX9 Gewalt is by far the best, and the preferred MP Blitzwing by most hard core fans. Fans Toys does have their offering coming up, but that’s been on pre-order for more than 2 years now and to this day still no real pics other than computer renders. FT usually has me impressed, but I got sick of waiting for them. Gewalt is so thoroughly spectacular that FT needs to come up big for me to consider their interpretation of Blitzwing.

Gewalt is German for violence, if any of you are wondering. He comes packed in tank mode, and for good reason. The tank mode is the most compact mode, and thus easy to fit into the box. The tank mode is good, and I should have took a pic. However, I would consider the tank mode the weakest of the 3 modes. Gewalt really shines in his 2 other modes. Consider the jet mode below.

Now that is Blitzwing! This is the MiG-25 that he was meant to be. Yes I know some G1 purists will bash it for not having the thick tank-kibble wings that he had in G1, but c’mon. The wings in that shape was nasty and in no way reflect how a MiG-25 looks. They only looked like that because of the toy limitations in the 80s. Gewalt’s jet mode is a vast improvement and updates this alt mode to modern MP standards.

The colors in this mode are unmistakably Blitzwing. I have a pic above showing off Gewalt in jet mode next to ToyWorld Requiem (or Elegy, as he is sometimes called). Gewalt is a big figure, but scales nicely with other MPs.

Now for his robot mode. Check it out:

Now if that’s not Blitzwing, than I don’t know what is. The way he looks, it’s like he stepped straight out of the G1 Movie. Blitzwing got a decent amount of screen time in the movie, up til the fracas inside Astrotrain after the injured Decepticons were jettisoned.

Articulation for Gewalt is pretty good. And the figure is so well built that he can hold all those poses. Gewalt’s transformation does test your abilities as a TransFan. I won’t say it’s difficult, like say Sunstreaker, but it’s certainly not easy. I only transformed it once from tank to jet, then again from jet to robot. I’m not sure I will be able to go back without looking at the instructions. But that’s a challenge for another day.

For accessories, he comes with his rifle, his sword, the tank cannon (which can be removed), an extra screaming face, and some extra waist parts (I’m not entirely sure that they’re waist parts, and I don’t know if they go on Gewalt or some other DX9 figure).

Here I have a pic of Gewalt with a fabulous rub-on faction decal.

That’s all the items for the month. Again, 2018 started with a bang, with so many figures. And they’re all quality products too. The only two pieces here that I would possibly not recommend is Arcee and Grotusque, and I only say that because they’re repaints. I recommend everything else. It’s a good time to be a TransFan.

Transform and Roll Out!

 

Happy New Year! I usually do these new year’s posts right around the turn of the year, either on New Years Eve or New Years Day. But of course life gets in the way, and so here is the annual New Years post delayed til the end of January. Better late than never I always say.

I’m conflicted as to how I feel about 2014. For starters, we had another TF movie. Age of Extinction was quite the paradox in movie history. It was the highest grossing film worldwide for 2014, yet that the same time Rotten Tomatoes report a lowly rating of only 18%. And compared to previous movies, I would say that the AoE toys as a whole are rather disappointing. I think Hasbro recognized that most mainstream fans may be sick of another Michael Bay full-length feature, and in response did not make as many toys. Personally I don’t think I can take anymore “Bayhems”. I sincerely wish another director would take over the franchise. Asking for popular and proven sci-fi action directors, such as J.J.Abrams, Joss Whedon, or Christopher Nolan, is probably out of the question. And the movie studio would not want someone who would take a dramatic departure from what Bay has laid out. Though a little outdated, this article suggests 6 directors who could potentially take over the TF movie franchise. I would add Justin Lin (of Fast and Furious fame) and Brad Bird (Mission Impossible 4) to this list.

2014 also saw a record number of 3rd party transforming robots offered. If you’re only into official Hasbro and Takara products, this wouldn’t matter to you. But if you’re reading this blog, chances are you are at least familiar with what I’m talking about. Just a few years back, all you had to know as far as the 3rd party scene was FansProject and TFC Toys. Those days are long gone. There are probably about 50 3rd parties out there, all doing its own thing and wanting a piece of your hard-earned TF dollars. And there appears to be no slow down. I sometimes fear that the market for 3rd party products are near saturation. Let’s face it: this is a niche market. Third party figs are expensive. Having so many companies vying for a piece of the pie… I don’t know how sustainable this is.

OK, now let’s look at some statistics for 2014. Here is the break down:

• 21 figures from Age of Extinction
• 8 figures from Transformers Prime
• 4 Masterpiece figs
• 1 figure from Fall of Cybertron
• 32 figures from Generations Thrilling 30
• 2 TFCC or convention exclusive figures
• 25 Third Party products

That’s a grand total of 93 figures for the year. It comes to 7.75 figures a month. Just slightly more than 2013. Notice there are 25 3rd party products! 25! That’s gotta be a record for me. I wonder if this trend will continue in 2015.

I’ll end this post with a few collection pics of some of my favorites from 2014.

Age of Extinction Grimlock, Slash, Slug, Strafe, and Scorn.

Maketoys Paladin Chaos (tribute to The Fallen)

Masterpiece Streak. Released in 2013, but actively played with in 2014. Shown here holding his standard rifle and a pistol from a Gears of War figure that I no longer have.

Age of Extinction Drift and Hound

Masterpiece Wheeljack and Bumblebee

Generations Brainstorm and Jetfire

Mastermind Creations Feral Rex (Predaking), looking awesome combined!

Happy 2015! Transform and Roll Out!

This past summer, me and the GF took a trip to Asia. First we went to Japan. We hit several cities while in Japan, including Tokyo, Koyto, Nara, and Kobe. Then we went to Shanghai, China (where the GF is from). After that I went to Taipei, Taiwan by myself (where I’m from). The entire trip was a little over 2 weeks. I had the time of my life! This was the best trip I have taken in quite some time.

While we were in Shanghai, the GF had to show me Jing’an Temple. Actually, we stayed pretty close to the Temple, within walking distance. Jing’an Temple is right in the heart of the city, and it is a must visit if you are in Shanghai.

I was there around June 1st, and wouldn’t you know it, they were doing a Transformers Age of Extinction promotion right next to the Temple! They had a booth set up right beside the Temple. It’s like they knew I was coming! Look at the first pic below and you will see the booth, and parts of the Temple right behind it. In the booth were many TF figures, not limited to AoE toys. I was seeing many of the AoE figs for the first time. Prices weren’t that good though. TFs in Asia are typically double the cost, and this particular location is a total tourist trap. So I didn’t buy anything til I got back to the States. But seeing the AoE booth with a large Grimlock display was still quite cool. Check out pics below.

After seeing Age of Extinction, it becomes obvious why promotion in China is absolutely necessary. I won’t explain it. See TF4 for yourself. And after seeing the movie, check out this Honest Trailer for TF4.

Shanghai is so cool! Transform and Roll Out!

Around May of this year was when Age of Extinction toys started to appear. I started to see them in early May, but I wasn’t able to purchase any until late May. More on this later in the post. Here are my acquisitions for May.

• ToyWorld Hardbone, bbts.com, $69.99

• Age of Extinction High Octane Bumblebee, TRU, $14.99

• Age of Extinction Slug, Target, $14.24

• Age of Extinction Scorn, Target, $14.24

• Age of Extinction Evasion Mode Optimus Prime, Target, $23.74

Other than Hardbone, all figures are from Age of Extinction. The release of AoE toys finally ends a long retail TF drought that lasted for much of the year. I was happy to see some new figs on the shelves, but at the same time I knew that Hasbro’s focus on AoE figures would also equate to less attention on the Generations line, my favorite TF line from Hasbro. Still, seeing something I want on the shelf is always better than seeing nothing.

But before I get into AoE, let’s talk about Hardbone, ToyWorld’s homage to G1 Hardhead. I actually bought this figure late last year, around Thanksgiving I believe. BBTS was doing their Black Friday sale. Only thing I wanted from the sale is Hardbone. As a whole, I’m very impressed with figures from ToyWorld as I think they all have solid construction, nice design, good value, and G1-inspired aesthetics. And I saw good reviews of Hardbone on YouTube, so I wasted no time to buy one at the sale. I always use the Loot feature at BBTS, to save on shipping. However, between then and May, I bought nothing else from BBTS. Any item in the loot can only be held for 6 months, so in May I had to ship Hardbone. I was not disappointed when I received the figure. Both modes look nice and the figure is well built. Transformation is not anything revolutionary, but in this case the tried and true formula works. Hardbone has weapons galore. Obviously he’s got his big shoulder cannon, but the twin guns that he had in G1 are here as well. And TW included some extra weapon accessories for good measure. The Headmaster gimmick itself is not really improved upon for G1, but suffice to say that it’s there. Overall I think this figure is an excellent modern update of G1 Hardhead.

OK, now onto the Age of Extinction figures. In early May I first saw them at K-Mart. I found the first 4 deluxe figs from Wave 1, which are High Octane Bumblebee, Crosshairs (not pictured), Slug, and Scorn. I tried to buy Slug and Scorn, but at checkout they would not ring up a price. So they wouldn’t sell them! K-Mart said they were put on the shelves by mistake. Lame! Anyway, less than 2 weeks later I found them elsewhere (and pretty much everywhere).

When I first saw the AoE figs, I definitely wanted the Dinobots. Robots transforming into Dinosaurs are some of the best ideas Takara has came up with, and the G1 creators were smart enough to personify them as the bad asses that they are. So I’m kinda surprised that Hasbro doesn’t milk this more by making Dinobots all the time, in whatever is the active TF continuity. At least for the 4th movie, Michael Bay was smart enough to include them (minor SPOILER ALERT, highlight over the next sentence to see: they only appear at the very end, for about 15 minutes. LAME!). Anyway, as for the figures themselves, I like Scorn. He’s my favorite of all the deluxe Dinos released so far. I like both the dino mode and the robot mode. Slug is ok. He’s obviously a homage to G1 Slag, being a triceratops and having a oh-so-clever name change. These movie dinos sure are colorful, like Power Rangers. In the movie they are more metallic looking, like G1 Dinobots. I bet in the future Hasbro will make limited editions of these guys in movie colors.

I like the Bumblebee figure. At the core, he’s not anything that we haven’t seen before in a movie Bumblebee. But I’m digging the classic muscle car (it could be a classic Camaro, but I could be wrong). The only other time they made a classic car movie Bee was in the first movie (which I have and broke), so it’s good to see him in this form again after all the modern Camaro Bees.

Last but not least, there’s Evasion Mode Optimus Prime. When I first saw preview pics of this figure, I was beyond thrilled. That alt mode is so G1 it would be illegal for me to not get one. The robot mode is still has the signature Michael Bay look, but with more G1 aesthetics and colors (though in the movie he does not appear in these colors). The transformation of this piece is actually very refreshing. The legs are kinda the same as always for Prime figs, but the upper body transformation utilizes quite a interesting twist. It’s as if the cab folds inside out on all sides to form the upper torso. The result is a nice movie-verse figure that mixes well with G1. I recommend this Prime, and with this upcoming aftermarket accessory to make him look like Powermaster Optimus, I say all G1-ers should get this fig.

That’s all for now. Age of Extinction has arrived… Transform and Roll Out.