October always seem to be a busy month in terms of TF activity. In October of 2012, I set a personal record for most TFs purchases in a month. This month I may have set another new record, of a related but slightly different category. So sit back, relax, and enjoy. This will be a long post.

• Age of Extinction Drift, Toys R Us, $24.99

• Age of Extinction Optimus Prime Evolution 2-Pack, Toys R Us, $44.99

• MakeToys Quantron, tfsource.com, $399.99

• Generations Thrilling 30 Jetfire, bbts.com, $46.99

• Fans Toys Scoria, bbts.com, $199.99

• Transformers Prime Beast Hunters Cyberverse Optimus Prime, bbts.com, $4.99

• Skrapnel with Reflector and Tailgate with Groundbuster, bbts.com, $21.99

• Nemesis Prime with Spinister and Cliffjumper with Suppressor, bbts.com, $21.99

• Generations Thrilling 30 Waspinator, Skids, Goldfire, Dreadwing, bbts.com, $59.99

• Generations Thrilling 30 Crosscut, Nightbeat, Windblade, Jhiaxus, bbts.com, $59.99

Age of Extinction Voyager Drift is a repaint of Skyhammer from Dark of the Moon. It appears they keep using this mold for Movie-verse figs. Skyhammer is one of my favorite figs from DotM, so I had to have this Drift. The figure is exactly the same, other than the head mold, the blue paint scheme, and the swords. Drift’s swords are kinda cool. He can use them separately in each hand, or have them combine into one huge sword.

I bought the Optimue Prime Evolution 2-Pack purely for the repaint of the Classic Prime mold. I love that figure, and this shiny new paint had my attention. The other Prime figure here is a repaint of Evasion Mode Optimus Prime from Age of Extinction. In retrospect, Evasion Mode Prime is one of the only few good figures from TF4, so I’m glad I have this repaint. I did not open this 2-Pack. The collector in me will probably just hold on to this as mint.

When I first head of MakeToys Quantron, I already made up in my mind that I had to have it. Quantron is an homage to the Technobots of G1, my favorite Autobot combiner team to come out of that era. Sure the Aerialbots are the most famous, but I think the Technobots are the coolest. I still remember buying Afterburner, my first fig from this awesome team. I loved his futuritic motorcycle mode. MakeToys Quantron wasn’t cheap. And I’m ashamed to say that as of this writing I still have not had the chance to play with this at all. I barely opened the box a few weeks ago to inspect the contents. Life as a working adult is way too hectic, and all of you reading should rue the day when you don’t have the time to immediately enjoy a $400 toy. But I promise to get to Quantron soon. All reviews I have seen gave it high marks. I know I will not be disappointed.

I have repeatedly mention how cool Generations 30 Jetfire is elsewhere in this blog, so I won’t do it again. Just know that he is awesomeness manifested in physical form. Go out and get yours now.

Masterpiece scale Dinobots is something that many 3rd parties are jumping into lately. These figures are usually $200 each… not cheap by any means. They all look pretty nice. But if I’m to get one, I want to go with a 3rd party that I trust. And so comes Scoria by Fans Toys. I was thoroughly impressed with Quakewave, so I had to give their interpretation of Slag a shot. Scoria does not disappoint. In robot mode he’s big and beefy. Construction is solid, and the transformation to dino feels familiar and refreshing at the same time. Scoria looks awesome in dino mode. I wish I have some pics handy to show him off. Maybe I will in a separate blog post.

I got TF Prime Beast Wars Optimus Prime purely because he was on sale at BBTS. I saw the fig quite frequently on the racks at stores like Walmart and Target and have always wondered if he’s any good. He’s not. A required purchase this ain’t. I already wasted too much time writing about this figure.

Nemesis Prime and Cliffjumper are just repaints of Optimus Prime and Bumblebee, respectively. So I won’t talk about them too much. Skrapnel (or Shrapnel) is a cool little G1 Insecticon. This is probably the first time in a long time that Hasbro has made a G1 looking Insecticon. Tailgate is using a mold that will be repainted into Windcharger. This mold is ok. I got this to have a distinct mold for Tailgate, because I think the Reveal the Shield Windcharger is a much better mold and that will be my Windcharger.

The remaining deluxe Generations Thrilling 30 figures I’ll just quickly mention. Goldfire, Nightbeat, Dreadwing, and Jhiaxus are repaints of a figure in the same lineup. I really like Jhiaxus though. I’m liking the color scheme, and Hasbro reworked the mold to be different enough that it feels like a distinct figure. Windblade is a brand new mold. She looks pretty cool in both modes, but the figure itself is kinda flimsy. Waspinator is very cool! This is probably the coolest Waspinator that Hasbro has ever made. I like the wing gimmick. Skids and Crosscut are repaints of each other, though this mold is the first time we’re getting them. I was really looking forward to Skids, since many reviews praised the figure. The car mode is nice, but the robot mode has some poseability issues. There’s so much going on in robot mode that all the features start to block on itself. Still, all the weapons on Skids (and Crosscut) does make for a nice looking figure, when you can get them to pose the way you want.

Ok… that was a lot of figs! 27 total by my count. 23 if you don’t count the Mini-Cons of the Generations Thrilling 30 legends figs. My previous record for single TFs in a month is 24, so this month does surpass that if Mini-Cons are included as separate figures. However there’s one thing that this month sets a record for… and that’s the amount spent! Adding all these up, the total TF spending this month comes to a whopping $885.90! Ouch. That’s a bit much by anyone’s standard. Quantron and Scoria accounts for $600 by themselves alone. I really need to start selling off whatever I don’t play with anymore. Time to list more stuff in my Sales Section.

October is the last month of extravagant TF spending for 2014. Things will die down for the rest of the year.

Oh, one more thing, at the end of Oct 2014 I took another pic of my orange TFs. Check it out.

More to come… Transform and Roll Out!

It seems like every 3rd party out there today wants a piece of independent Masterpiece Autobot action. Not long after my last post about a 3rd party Masterpice not Jazz, Fans Toys is now doing their version of Masterpiece not Hound called Willy. Check out pics below.

Pics look nice. Hopefully we will get some color pics soon. As of this writing, I have two figs from Fans Toys (Quakewave and Scoria) and I can certainly attest to the high quality of these two. If this trend continues, FT not Hound should be a solid piece.

Transform and Roll Out.

There are quite of bit of figures taking up room on my shelf. Before I put them away, I’ll give them their 15 minutes of fame and feature them in a post.

Same pic, different angle.

From left to right
Top shelf, in robot mode: MMC Bovis, TFP Beast Hunters Shockwave, Fans Toys Quakewave, Masterpiece Acid Storm, Generations FOC Thundercracker
Top shelf, in alt mode: Generations Megatron, Generations FOC Kickback, Generations Blitzwing, TFP Breakdown, TFP Silas Breakdown, Generations FOC Shockwave
Middle shelf: Generations Orion Pax, Generations Bumblebee, Generations Springer, Generations Sandstorm, TFP Beast Hunters Optimus Prime, TFP Beast Hunters Ultra Magnus, , Generations Hoist, Generations Trailcutter
Bottom shelf: Masterpiece Prowl, Masterpiece Streak, Generations Blurr, ToyWorld Trace, ToyWorld Aurora

Can you tell who it is the oldest figure on here? That’s right, it is Blurr. I believe he was released 2010. I dug him out recently for display because he’s such an awesome fig!

With the exception of Blurr, Breakdown, and FOC Shockwave, all figures on here were acquired in 2013.

4 figures are from third parties: MMC Bovis, Fans Toys Quakewave, ToyWorld Trace, and ToyWorld Aurora.

There are 3 Masterpiece figures: Acid Storm, Prowl, and Streak. Though one could certainly make a case for Quakewave. He’s a third party fig, but he fits into the MP toys just fine.

OK, time to make more room for the figs of 2014. Into the closets these will go. Transform and Roll Out.

September was off to a slow start as far as TF purchases go. But then a whole bunch of figures started to make their appearance past the midpoint of the month. Anyway, here they are.

• Quakewave by Fans Toys, edbomber.com, $150

• Generations Thrilling 30 Thundercracker, Toys R Us, $12.99

• Generations Thrilling 30 Hoist, Toys R Us, $12.99

• Generations Thrilling 30 Starscream and Waspinator, Target, $9.99

• Generations Thrilling 30 Metroplex and Scamper, amazon.com, $106.03

• Generations Thrilling 30 Megatron and Chop Shop, Target, $9.49

That’s a total of 6 purchases for 9 TFs. All are from the Generations Thrilling 30 line, except for Quakewave which is a third party product. There are 6 Decepticons and only 3 Autobots this month, but I think the balance of power is clearly on the side of the good guys with Metroplex alone.

For the first time in a long time, I actually opened all the figures I bought in the month! I guess when it comes to CHUG stuff, I just can’t wait. When it comes down to it, I still like G1 derivatives the best!

I went into Quakewave a little bit in my previous post, so I won’t repeat it here. In short, he’s amazing. Get him now while supplies last. Oh yeah, I also want to give a shout out here to edbomber.com. It’s a great store. Quakewave was my first purchase from them and I was very pleased. I like the usual places where I get my 3rd party Transformers, but having one more option is always a good thing. More competition is always a win for the fans.

This Thundercracker is the Fall of Cybertron version, though he’s not packaged as such. He’s a exact repaint of FOC Starscream. I love that mold, but I think in Thundercracker’s colors, this figure looks even better. Hoist is a repaint of Trailcutter, with a new head mold and a new weapon that becomes his crane. I think I actually like this figure better as Hoist.

The little Megatron and Starscream figs are pretty cool. They are easy and fun to transform, while paying good homage to their G1 selves. I kinda like Chop Shop, even though he’s super simple (think G1 Throttlebot simple). Waspinator is a total fail. All his modes suck.

And that brings us to Metroplex. This is to my knowledge the biggest Transformer ever produced! He’s pure awesomeness. You will need a lot of room to keep this guy around, but believe me he’s worth it. The $106 price tag from Amazon is nice too. Oh yeah, he also comes with Scamper. I must review him in the future. This is something I must do as a TransFan.

That covers my purchases for September. This month was kind of a pleasant surprise. I didn’t think there would be this many TFs hitting the stores. The final TF count is good, not too many that I feel overwhelmed, and not too few that I feel like there are no new figs. Plus these are all good figures that fit well into the CHUG or MP verse. Hopefully October will be just as good… Transform and Roll Out.

Here is what I currently have on display.

Same pic, different angle.

From left to right
Top shelf, in alt mode: TFP Breakdown, TFP Silas Breakdown, TFP Beast Hunters Shockwave, Generations Blitzwing, TFP Dreadwing, Generations Megatron
Top shelf, in robot mode: Fans Toys Quakewave, MP Soundwave with Laserbeak
Middle shelf: Generations Bumblebee, Generations Springer, Generations Sandstorm, TFP Beast Hunters Optimus Prime, TFP Beast Hunters Ultra Magnus, Generations Trailcutter, Generations Orion Pax

Most of the Transformers in this group I would highly recommend. Each figure is a worthy purchase that any TransFan would be happy to include in his collection. The two Breakdown figures are some of the best to come out of the TF Prime line. MP Soundwave is considered by many to be the best MP figure ever made. Generations Springer and Sandstorm are nothing short of spectacular, and I dare argue that, for the first time ever, Hasbro has done triple changers right with these two. Trailcutter has finally arrived to the CHUG party, but better late than never. And for the first time in TF history, Hasbro made a Orion Pax figure. This figure is still a pretty rare find as of this writing.

Quakewave by Fans Toys is absolutely amazing! This is a 3rd party Shockwave homage that scales incredibly well with the MP line (check him out next to MP Soundwave). Construction of the figure is very solid, and the mechanical design of this toy is on par with any MPs that Hasbro and Takara has come up with. He looks good in both modes. Transformation is fun without being overly complex. Price is also reasonable at $150. The LED gimmicks (in both eye and cannon arm) are very cool.

The only two figures that may be debatable is Bumblebee and Blitzwing. Blitzwing has the shoulder-non-locking construction issue that all fans are aware of by now. And Bumblebee, despite being a brand new mold, feels too similar to past figures of the same character. But even with these flaws, I still recommend them. Blitzwing’s problems can be remedied with just a little bit of work. And if for some reason you don’t own any Movie-verse or TF Prime Bumblebees, then this new figure should feel very refreshing for you.

Some of these figs have been on the shelf for a while. They’ve had their 15 minutes, so back to the closets they go to make more room. I expect my next post like this to appear very different. Til then… Transform and Roll Out.