The Horrorcons are one of my most treasured subgroups from G1 Season 4. They are both Triple Changers and Headmasters, successfully combining the two gimmicks. My cousin had both Apeface and Snapdragon, and I was super envious since I had neither. I remember playing with his Apeface quite a bit, but not Snapdragon. I also remember buying Apeface for my best friend at the time. Those were the days.

The jet modes of both G1 Apeface and Snapdragon are really good. But their other modes left a lot to be desired. In robot mode, both of them look like they are wearing diapers with legs that are way too short. And in beast mode, both figures suffer from having way too much bulk in the main trunk section. Even for G1 standards, all modes other than the jet modes were horrible (pun intended).

When I started collecting TFs again in the modern era, I knew Hasbro would update the Horrorcons at some point. And they did. We saw WFC Siege Apeface in 2019, and WFC Earthrise Snapdragon in 2020. It took them longer to do the Horrorcons than I thought they would, but better late than never.

As much as I loved the Horrorcons, it would be absurd to expect HasTak to make official Masterpiece versions of the duo. So it was inevitable that a 3P company would attempt it. Enter KFC. This is Keith’s Fantasy Club, and not the famous fried chicken chain. KFC released their takes on MP style Horrorcons, around 2017. And as far as I know, they’re the only 3P to attempt it thus far. Are Horrorcons not as popular as I thought? Am I the only TransFan that like them? The horrors!

I acquired KFC Kingzilla (aka Snapdragon) in 2020 on a sale. Prior to that, the only KFC product I have are these E-Nergeon Cubes. They’re not bad, but this product alone is hardly an indicator of the quality of KFC’s offerings. Kingzilla is my first real figure from KFC. So how good is Kingzilla? Let’s find out. But first let’s first take a look at the box and what’s inside.

Box and Contents

Front of the box.

Back of the box. Gotta love this bio. Riches! Fembots! TFs apparently value much the same things humans do.

Look at all the stuff inside! Kingzilla comes with:

• 2 rifles
• a magnetic metal plate for Komodus to stand on
• 2 chest blast or flame thrust effects
• extra face for KFC Kingorilla (Apeface), attached to Kongor (Spasma)
• 2 extra red parts that I assume is a fix or enhancement for Kingorilla
• bio card
• instruction book and comic

Another accessory is a stand to be used in jet mode. I didn’t actually try this. Kingzilla is a heavy figure, and I’m not entirely sure this stand can fully support the weight for an extended period of time. But don’t say KFC doesn’t love you. They included everything but the kitchen sink in this package. Bravo.

Robot Mode

I always start with the mode that the figure comes packed in.

That is one awesome looking MP style Snapdragon. This is a big and beefy figure. The colors are G1 accurate. Materials used on the figure is superb, with high quality plastic and die-cast. Kingzilla really has presence, he impresses by appearance and size alone.

Smart observers will notice that the above pic does not show the figure in a standard traditional A-stance. And that leads me to the first very noticeable issue with Kingzilla. See below.

The legs are on ratchets, and this is the first position swinging outwards. It’s way too wide! Quite a few TFs share this problem. Generations Jetfire is the first figure that comes to my mind. Someone should coin a term to describe this problem.

The pic above shows the legs perfectly straight. So it’s either this, the super wide A-stance, or some kind of modified action stance to have Kingzilla posed in a standing position. This issue does mark down the figure a bit for me. But on the bright side, this is about the only real weakness with this figure. It’s all good news from here.

Looking at Kingzilla from the side. The obvious distraction here is that huge backpack which makes up the jet mode nosecone. But it doesn’t bother me that much. Notice the super long heel spurs, which provides great stability for the figure.

Another shot of the side, with the arms raised, to get a better look at the sides of the body and legs.

Back of the figure. A bit bulky, but I like how it looks.

As I look through these pics of the robot mode, I realize almost all of them has Kingzilla holding the 2 rifles. So here I offer a pic without the rifles, in his wide A-stance.

Pretty good face sculpt. This is how I remember Snapdragon looking, in the animation.

KFC did not forget the chest tech specs that was a feature on all G1 Headmasters. The specs automatically come up upon inserting the Headmaster. Seeing this unnecessary but nice gimmick brings me back to the 80s. I yearn for the 80s.

Kingzilla in an action pose. There is quite a bit of articulation points in robot mode. However, some issues hinder the overall articulation. A lot of the joints are on ratchets, so it does limit the positioning. The bigger issue, however, is that this is a large and heavy figure. There are poses that are achievable, but the figure won’t hold it due to its own weight. The big backpack also makes the figure back heavy, limiting poses where Kingzilla is leaning backwards.

Here is Kingzilla with those chest blast effects. I guess Snapdragon did this somewhere in the G1 animation, though personally I don’t remember it. Kudos to KFC for including it. Nipple blast action never gets old.

Now for some size comparisons.

With MP-36 Megatron. I like how these scale. In the wide Kingzilla A-stance, Megatron is actually a bit taller, if you compare where their eyes are. But Kingzilla is overall bigger, buffer, and beefier. That’s how I would expect these 2 to scale.

With WFC Earthrise Snapdragon.

Before we get to the other modes, let’s take a look at the Headmaster Komodus (Krunk).

Komodus looks pretty good. I can’t say how close he resembles the G1 toy or cartoon, since I don’t pay close attention to the Headmaster Nebulans.

Here is Komodus with the magnetic stand. I don’t detect any magnets when Komodus is placed on it, so it’s possible this is not magnetic at all. Now that I think about it, I’m not sure where I learned that this is supposed to be magnetic. Not a big deal, I can’t see myself using this accessory often.

I’m very pleased with the robot mode overall, though it is my least favorite mode of the 3. The obvious weakness is that super wide A-stance. The big backpack could turn off some fans as well. But he’s got way more positives than negatives in this mode. He’s a big, imposing figure, built with solid materials. Superb construction with tight ratchets. Nice paintjob with G1 accurate colors. Enough articulation at most of the joints that need them.

Jet Mode

The instructions start off with going from robot to jet first, so that’s the mode we’ll look at next.

That is one sleek and awesome looking jet!

Here we see the jet in another angle. It’s very G1 accurate, as far as the shape of the jet. KFC opted to use a dark silver as the overall color, instead of Snapdragon’s G1 off-white. Some fans bash this decision, but I personally don’t see it as a big deal. Maybe KFC will release a repaint later with more G1 accurate colors. If this was Hasbro, I know they will.

Looking at the jet directly from the front. From this angle you almost don’t see the wings. Kingzilla is a long jet with wings way in the back. Kinda reminds of the Cobra Night Raven S3P from G.I.Joe Real American Heroes.

Looking at the back of the jet. From this angle, you can easily see the wings, rear vertical stabilizers, and main thrusters. I should have took a pic where the flame effects are used on the thrusters. Notice the rifles are attached under the wings.

Underside of the jet. It’s pretty clean. The bulk of the body is nicely incorporated into the jet as part of the overall transformation scheme. This is partly due to the original G1 design.
It was obvious that the G1 toy designers prioritized the jet mode first, and Kingzilla adheres to that same overall G1 scheme almost to a fault. The landing gears are deployed in the above pic. The two rear landing gears on the legs can be a bit tough to deploy and retract.

A cool gimmick of Kingzilla (and Kingorilla too) is controls that light up inside the cockpit. The pic above shows it lighted. I love this gimmick.

Here is a shot of Komodus sitting inside the cockpit of Kingzilla in jet mode. Notice the controls are lighted too. The lights are activated by the black switch, to the right of Komodus, at the base where the cockpit opens. Opening the cockpit will automatically flip the lights on. The black switch is accessible from the outside too, without having to open the cockpit.

for size comparison, I’m reusing a pic I took when I did the DX9 Gewalt review. Here are these 2 figures together in jet mode.

Kingzilla’s jet mode is my favorite of the 3 modes. I honestly see no weaknesses with this mode. It’s nice and sleek with no bulk. All parts come together well with solid construction and no dangling parts. The jet mode balances well on the 3 landing gears. The controls light up gimmick, though unnecessary, is too cool to ignore. This jet mode gets an A+.

Dragon Mode

It’s not clear to me what Kingzilla’s beast mode is supposed to be. But since his name is Snapdragon, I’m gonna go with dragon. Whether this is a walking komodo dragon, a mythological dragon, or some kind of future space T-Rex type dragon, your guess is as good as mine. All I know is Kingzilla looks quite fearsome in this mode.

That is a great looking interpretation of Snapdragon in beast mode. It’s very G1 accurate, as far as overall look and colors. The twin cannons on the back screams G1. The purple neck attachment that Komodus connects to really nailed the G1 cartoon look. The way that the jet nosecone bends up as the dragon tail is so G1 it’s criminal. If I have one complaint about this mode, is that the dragon arms are a bit skinny. In these pics they look ok, but they look skinnier in person. Construction of these arms also feel somewhat flimsy, when considering that the rest of the figure is so robust and solid.

A shot of the dragon from the side.

Kingzilla dragon back view.

Close up of the dragon head. Komodus looks great as the head of the dragon as well. The jaw can be opened and closed, ready to bite on hapless Autobots, or anyone foolish enough to challenge Kingzilla.

Size comparison of Kingzilla in dragon mode with MP Megatron.

With Siege Snapdragon, both in dragon modes.

Kingzilla terrorizing WFC Earthrise Airwave. Why would these 2 characters ever be together in the entire TF-verse? They wouldn’t. Airwave was handy on my desk when I needed a victim for Kingzilla.

One aspect of Kingzilla I didn’t mention til now is the transformation engineering. In short, this figure is not at all difficult to transform, especially for a figure of this size. Some modern day MP style TFs go overboard with the transformation complexity. Not Kingzilla. This is a figure where any decent TransFan can quickly figure out the transformation scheme of all 3 modes without looking at the instructions. And on top of that, all 3 modes look pretty damn good. This is a testament to the design engineering achieved by KFC.

TL;DR

In summary, I highly recommend Kingzilla. He’s a big and solid figure, scaling well with other MPs, official or otherwise. He’s well built with excellent materials, much of the figure is composed of high quality plastic and die-cast. Construction of the figure is superb, with tight joints and ratchets. Design and colors of the figure screams G1. He comes with plenty of accessories. The figure has several interesting gimmicks. All 3 modes look great without a super complex transformation.

Kingzilla is a figure you need in your collection. If you can find one now, buy it.

Transform and Roll Out.

 

We live in a great era of Transformers. When I came back to collecting the toys in 2004, it was returning from a 16 year hiatus where I paid little to no attention to what’s going on with the toyline. Now in 2020, I’ve been recollecting for 16 years, as long as my hiatus. Time flies.

Hasbro certainly did not forget us older fans that grew up with the franchise. CHUG (Classics, Henkei, Universe, Generations) draws inspiration mostly from G1. Many G1 favorites were updated in the line, sometimes multiple times.

CHUG obviously started with some of the most popular characters, like Optimus Prime, Megatron, and Bumblebee. And as the years went, more and more would be updated. Characters from the first 2 G1 seasons usually got earlier treatment. G1 Movie characters would soon follow. Even more obscure characters would later get updated. I wrote back in 2009 how I wished Sixshot would get an update, then in 2017 it became reality.

Now as I write this in 2020, and looking back, Hasbro has updated some TFs that seem as if they were reaching for the bottom of the G1 barrel. For example, they updated Jumpstarters (both Topspin and Twin Twist). They updated Duocons (Battletrap and Flywheels). Heck, they even did all the Monsterbots (Doublecross, Grotusque, Repugnus). I can think of way better G1 characters to update. And that’s where I got the inspiration for this post. I present below my top 10 G1 Transformers that desperately need an update today.

But first, some ground rules:

• I am not including any Pretenders. They suck.
• I am not including any Action Masters. They suck too.
• This list is for G1 TFs that got no update whatsoever. Even if a TF got a lame repaint of something else, or got revived as a Micron (like Titan Masters), or got a completely butchered Movie-verse update, that counts as an update. Yes I know that not having a real G1-style update sucks, but not having being updated at all sucks more. This list is reserved for the latter.
• There are G1 TFs where there’s no update now, but their update is coming. These TFs are not included.
• I am not counting 3rd or 4th party products. Only official products are considered

Here we go.

10. Hosehead
Allegiance: Autobot
Sub-Group: Headmaster
Function: Emergency Rescue
Modes: robot, fire engine
 
 

You think there would be an update to Hosehead by now. He is a Headmaster that came around in Season 5, and he transforms into a fire engine. Hasbro LOVES making repaints out of something simply because two characters share the same alt mode. Inferno has been repainted into Hot Spot so many times that I lost count. How about giving some love to Hosehead. Yeah I realize no one outside of G1 has heard of him. But this is too easy to not do. And we all know Hasbro loves easy and quick cash grabs. Admittedly, I had Hosehead in G1. He’s still in pretty good shape. Yes I’m partial to TFs that I own, but this is my blog, so there.
 
 

9. Dogfight
Allegiance: Autobot
Sub-Group: Triggerbot
Function: Aerial Combat
Modes: robot, jet
 
 

I must have a Triggerbot or Triggercon on this list. In G1 there were 3 Triggerbots (the good guys) and 3 Triggercons (the baddies), and I never had any. My favorite out of the 6 is Ruckus, a Triggercon. I wanted to put him on here, but then discovered that he was technically updated. He had a lame Transformers Figure Subscription Service update, being repainted from Combiner Wars Offroad. And worse, they called him Grabuge. Seriously?! Can Hasbro make him anymore trashy? But that technically counts as having being updated, so I went to my next favorite in this group of 6: Dogfight. I don’t know that much about Dogfight, but I do remember him having a scene in one of the IDW comics. In that scene, he was talking to the great Optimus Prime. And Optimus seems to not know who he is, hahaha! It’s refreshing to see that not all Transformers know each other, a concept that the G1 cartoons never explored. Anyways, he transforms into a jet with forward-swept wings. Similar to Conquest X-30 from G.I.Joe and YF-19 from Macross. They could repaint Terradive or Space Case from the movie verse, with a new head mold. Though I would prefer a brand new mold with a more G1-esque robot form. And I want the trigger switch gun action on the updated figure! That never gets old.
 
 

8. Freeway
Allegiance: Autobot
Sub-Group: Throttlebot
Function: Saboteur
Modes: robot, sports car
 
 

I had to include at least one Throttlebot on here. I have all 6 Throttlebots. I know there was at least one update to Goldbug. There could be more. But what about the other Throttlebots? Anyway, Freeway is my favorite out of the six, so I elect him to get an update. I know ToyWorld produced updates to all 6 Throttlebots, including Freeway (which they called Highway). I have their update to Searchlight and Chase (Aurora and Trace, respectively). Speaking of Chase, I think Roadburn may be the modern update to Chase. Still, there is no update to Freeway. If Hasbro wants to be lazy, just take Roadburn and repaint him blue to be Freeway. Personally I rather see a real update with a new mold. C’mon Hasbro get on it.
 
 

7. Venom
Allegiance: Decepticon
Sub-Group: Insecticon
Function: Psychological Warfare
Modes: robot, cicada
 
 

Finally, a Decepticon on here! When I was compiling this list, I immediately saw that they were mostly Autobots. So I very consciously tried to include more Decepticons. But if playing with the rules that I laid out above, there are almost no Decepticons to include. When you exclude Pretenders and Action Masters, it feels like all G1 Decepticons got an update. I did’t specifically exclude Micromasters in my rules, but deep down I feel they are just not cool enough. Deluxe Insecticons never got any love in G1 in the cartoons. The toys came as early as Season 2, so I’m including one here. Out of the 4, Chop Shop is the only one to have had an update (a lame repaint of Generations Skarpnel). So I could have picked any of the other 3. I chose Venom to be on this list for 3 reasons: 1) I like his wacky head mold, 2) he’s technically the Insecticon leader, though realistically that’s Shrapnel, and 3) he shares the same function of Psychological Warfare as Bombshell, my favorite Insecticon. In G1 I never had any of the Deluxe Insecticons, and I don’t know anyone that did. Thus I have no idea if the toys were any good. But if HasTak chose to update them now, I bet they could do something pretty nice.
 
 

6. Slugfest
Allegiance: Decepticon
Sub-Group: Cassette
Function: Messenger
Modes: stegosaurus, cassette
 
 

Another Decepticon on here! Slugfest is one of the few that I could find without any kind of update. I have the G1 toy, along with Overkill. You get these 2 in one pack. That’s how G1 sold the cassettes. Again, I’m partial to toys I had, and I still got these 2 in pretty good shape. They repainted other toys to be Overkill a bunch of times, probably anytime Hasbro felt like making a repaint from another T-Rex for a quick score. Slugfest never got any love. The character does not exist past G1. That’s a crime. Slugfest is just as cool as Overkill, for G1 standards. If you wanna go the repaint route, take Power of the Primes Snarl and give that Slugfest colors (that would look kinda cool, actually). Though I like a new mold, that transforms from stegosaurus to cassette. While you’re at it, do Overkill too. A real update from T-Rex to cassette. Hasbro this is your chance to impress me.
 
 

5. Sizzle
Allegiance: Autobot
Sub-Group: Sparkabot
Function: Interceptor
Modes: robot, funny car
 
 

A Sparkabot or Firecon is required on this list. These 2 Sub-Groups feature another popular toy gimmick at the time. All figures have a friction-motor that produces cold sparks. For the 3 Sparkabots, the cold sparks fire out the rear exhaust in vehicle alt mode. And for the 3 Firecons, sparks come out of their mouths in the monster alt mode. Sizzle is my favorite out of this 6 (and again, he’s the only one I had out of this bunch). For most G1 Fans, Sizzle is the one that everyone thinks of when this group is mentioned. In his tech spec bio, he’s described as a daredevil of an Autobot, akin to Hot Rod, Fastlane, or Air Raid. He transforms into a cool funny car. I think Hasbro needs to update Sizzle for that reason alone; I can’t think of any other funny car Transformers. His color scheme is also quite unique, going from an ash brown in car mode to tangerine red in robot mode. I very much would like to see cold sparks in a modern day figure, though I imagine Hasbro would never do it.
 
 

4. Slapdash
Allegiance: Autobot
Sub-Group: Powermaster
Function: Interceptor
Modes: robot, F1 race car
 
 

I love Powermasters. I first mentioned that here, and probably elsewhere on this blog too. From a toy perspective, having a Mini-con that transforms into the engine to unlock the transformation is kinda cool. But from a story perspective, it’s kinda lame. Now that I think about it, all Master technology makes no sense. If I was a TF, no way I share my head, weapons, or transformation ability with someone else. Nevertheless, the Powermaster toys were all really good for G1 standards. My favorite Powermaster is Getaway, who was updated as Breakaway. So I’m going to include the other 2 Autobot Powermasters not updated. The first one is Slapdash. I really don’t know much about the character, and I only vaguely remember the toy. He transforms into a F1 race car. Hasbro could just be lazy here and repaint WFC Siege Mirage. But don’t be lazy, be cool. Make a new mold.
 
 

3. Joyride
Allegiance: Autobot
Sub-Group: Powermaster
Function: Warrior
Modes: robot, dune buggy
 
 

Joyride is the other Autobot Powermaster that was released with Getaway and Slapdash. I know very little of Joyride as well, other than that his toy was pretty cool. He transforms into a dune buggy. Off the top of my head, I can only think of 2 other Earth mode dune buggies in the entire TF Universe: G1 Beachcomber and G2 Jetstorm. I like the color scheme on Joyride as well. He kinda has the same color palette as Skullcruncher (or Skullsmasher in recent updates). This is a very unique color scheme that belongs only to these 2 TFs. Maybe this needs to be explored. Or not.
 
 

2. Sureshot
Allegiance: Autobot
Sub-Group: Targetmaster
Function: Sharpshooter
Modes: robot, Cybertronian buggy
 
 

I love Targetmasters. So in preparation for this post, I looked through every Targetmaster ever made in G1. As far as I can tell, all the Decepticon Targetmasters have had an update for some kind. As for the Autobots, there are several that could use some love. One of them is Sureshot. I don’t know much about the character. He appeared in “Rebirth”, but his role was next to non-existent, so you would only find him if you really squint your optics and look. I never had the G1 toy, and I don’t know anyone that did. But it looks pretty cool, based on pictures. HasTak can really go to town and make a terrific update of this character if they chose to. If they opt to be cheap, they could make one mold and use it for both Joyride and Sureshot. They are both buggies in alt mode. Make the head mold different. Give Sureshot a Battlemaster and Joyride some kind of engine accessory. This is almost too easy to not do. I’m almost confident enough to bet that this will happen.
 
 

1. Pointblank
Allegiance: Autobot
Sub-Group: Targetmaster
Function: Enforcer
Modes: robot, Cybertronian car
 
 

I can’t believe Pointblank has not been officially updated yet. Back in G1 Season 4 when Hasbro introduced all the “Master” gimmicks, Pointblank is widely regarded as one of the best figures produced for that period. Many G1 fans jumped on getting Pointblank very quickly. His Cybertronian car alt mode looks great, and the robot mode looks well proportioned too. The color combination of red and baby blue sounds hokey on paper, but on the figure it doesn’t look too shabby. I am told too that Pointblank has a bigger role in the Japanese TF Continuity after Season 4. I have the MakeToys update of Pointblank, called Contactshot. Overall, Contactshot is not a bad 3P product, but there could be improvements. He’s a big figure in robot mode, which presents scale issues, even for MP. And the transformation is more complicated than it needs to be for a character like Pointblank. It’s high time HasTak stepped up to the plate and gave us an official update. Pointblank should probably be deluxe size to scale with other CHUG figs. Modern HasTak figures of this size are all very playable, which is exactly what I’m looking for in a Pointblank update.
 
 

So what do you think of my top 10? I know if another G1 fan had to make a top 10 based on the rules I laid out above, it would be very different. Feel free to comment below.

Transform and Roll Out.

 

Once in a while, I dig out older figures from their hiding places (read: stored in a closet or garage). I was looking for another figure, when I found FansProject Smart Robin in the same storage box. This figure was purchased back in April of 2014. I played with Smart Robin for a bit before he got stored. He hasn’t seen light since then.

Smart Robin is a 3P homage to Brainstorm, arguably the most famous Headmaster there is. Since it’s release, Hasbro has put out two official Brainstorm figures. One of them was a Walgreens exclusive. I bought Smart Robin before either of those. And yes, I would buy Smart Robin today, even if you already have any of the official figures.

As usual I will start with the mode that it comes packaged in.

Classic A stance.

Back view with and without weapon attachment. Very little back kibble.

Side view.

Smart robin is a well built figure with nice articulation. He can hold some good poses. He comes with twin guns, like he did in G1.

Close up of the face. I like the face mold, but it appears to be modeled more after the G1 toy. There’s a bit of paint smudge near both eyes. Other than that, paint job is nice. Obviously this will detach and transform into a Headmaster figure.

There is no working tech-spec that appears on the chest like G1 Brainstorm. Oh well. That was kinda gimmicky anyway.

With some other modern Brainstorm figures: Generations 30 voyager on the left, Titans Return deluxe (Walgreens exclusive) on the left. Smart Robin is just a bit taller than deluxe size. I think this is a good size to scale with MP class figures.

Transformation to jet mode is some of the most innovative that I have seen in quite a while. Two mechanisms are noteworthy. The first is that the wings are entirely compacted into the legs, and they fold out for jet mode. The other is that the body collapses onto itself from the sides, kind of like an accordion. To go to jet mode, this part is stretched out. It sounds hokey when I describe it in words, but trust me it’s cool. The jet looks a bit different from how Brainstorm looked in G1. But I like this update. The G1 jet shape is too bulky for today’s standards and I applaud FansProject to give him a more sleek look.

Jet mode at a different angle.

Rear view of the jet.

Directly from the front.

Cockpit opens and the Headmaster can sit inside.

Bottom view.

Retractable front landing gear.

Rear landing gear, one retracted and out left out.

With other Brainstorms in jet mode.

All in all, Smart Robin is a solid tribute to Brainstorm. He’s fun to play with and transform. He’s well built. Articulation is great in robot mode, and cohesively tight in alt mode. Scale wise, I would say he’s more MP. Yeah some fans may say this is more CHUG, but I disagree. In robot mode, he’s about the same height as MP Sideswipe or MP Wheeljack, and that’s how tall I imagine Brainstorm to be. Some of the other 3P Headmasters produced (such as MakeToys Hardhead) are way too big, even for MP. Here is a pic from an old post, where I have Smart Robin next to MP Bluestreak and MP G2 Sideswipe. Determine for yourself.

You would be smart to purchase Smart Robin. Transform and Roll Out.
 

July 2016 is blessed with a heavy dose of TF goodness. This month marks the start of a new TF line – Titans Return! TR is Hasbro’s official update of Headmasters, and I have been looking forward to this series of figures for quite some time now. July also includes some excellent third party acquisitions.

• Titans Return Galvatron, Toys R Us, $24.99

• Titans Return Sentinel Prime, Toys R Us, $24.99

• Titans Return Skullsmasher, Toys R Us, $16.99

• Titans Return Hardhead, Toys R Us, $16.99

• Titans Return Scourge, Toys R Us, $16.99

• Titans Return Blurr, Toys R Us, $16.99

• Titans Return Stripes, Target, $10.29

• Combiner Wars Starscream, HasbroToyshop via eBay, $35.99

• Masterpiece Ramjet, tfsource.com, $179.99

• ToyWorld Muddy, tfsource.com, $80

• DX9 Carry, tfsource.com, $129.99

Quick sidebar: I started a new job in July. It was bittersweet to leave my last job, after 9 and a half years there. For reasons that I won’t go into, it became obvious that I should no longer stay at that job. I like my new job. I won’t say that it’s better than my old job in all aspects, but I’m playing the long game, and I’m confident that this new position will work out better for me in the long run. Besides, my new job allows me more time to dedicate to this blog. This was the first post after starting the new job. I have been more consistent in making new posts since then.

Those of you that read this blog regularly know that I like to hit up stores at lunch time and hunt for TFs. And just like my old job, there is also a TRU near my new job. The very first week on this new job (I think it was Day 2), I found the Titans Return figures at the TRU! I say this is a clear sign that I made the right decision in taking this job.

Titans Return

So let’s go over these TR figures first. I found all the Wave 1 deluxe and voyager figures in one shot. The 4 deluxe figs are Blurr, Scourge, Hardhead, and Skullsmasher. And I like them in that order, from best to worst.

Blurr is an awesome fig. The alt mode is extremely cartoon accurate in appearance. The robot mode is nice and proportionate. Transformation is smooth and intuitive, complex enough to feel like it’s not made for kids, but not too complicated that it distracts from the fun. Construction of the figure is superb, no joints too loose or too tight, and no tolerance issues. My only gripe is the color. The US version of TR Blurr is like this dark turquoise color. Why they decided to go with this color scheme is beyond me. Especially since the Japanese version (called Transformers Legends) has G1 accurate colors. For that reason, many hardcore G1-ers have decided to import the Japanese version. I may do that myself at some point. Blurr was never a Headmaster in G1. In TR, his Headmaster partner (now called Titan Masters) can fit comfortably inside the vehicle in alt mode, and attaches nicely in robot mode. All in all, TR Blurr is highly recommended, despite my gripe with the colors.

TR Scourge is a solid fig. Like Blurr, G1 Scourge was never a Headmaster. And like TR Blurr, the Japanese version of TR Scourge has a color scheme more similar to G1. TR Scourge has a much more accurate cartoon alt mode appearance over the Generations figure that was released around 2011. Sometimes in the cartoons, you see Scourge fly around in alt mode with his head exposed, on top of the spaceship. With TR Scourge, you can reproduce that look. All you need to so is stick the Titan Master in head mode on top of Scourge in alt mode. I like the robot mode as well. When compared to the robot mode of the Generations fig, it’s debatable which is more toon accrurate. They each have their pros and cons. But in my opinion there are no obvious weaknesses with TR Scourge in robot mode. He’s fun to transform, and he’s well built. Scourge became a Targetmaster in Season 4, so I guess making him a Headmaster is not that far-fetched.

Hardhead was one figure that I was really looking forward to in TR. I always regretted not buying the G1 figure, and I had many opportunities to. As a kid in the 80s with a very limited allowance, G1 Hardhead was a bit out of my price range. But I always liked his alt mode, and the robot mode wasn’t too shabby for G1 standards. I do have Hardbone, ToyWorld’s take on Hardhead. I highly recommend that figure, though as of this writing, you may want to consider Iron Will by MakeToys if you are in the market for a 3P Hardhead. Anyway, back to TR Hardhead. He’s only ok. I like the alt mode and the robot mode, but the figure feels a bit flimsy. During transformation, the figure feels extremely hollow. I think the reason for that is equal parts design and construction. And speaking of construction, Hardhead is not the best. He’s ok, but some parts are too loose for my liking, especially in the legs and hips. This figure could have turned out so good if they made some design tweaks, and if the build was improved to have better tolerances. His floppiness is so not worthy of the name Hardhead. As is, I can only recommend Hardhead to hardcore G1 devotees like myself. Casual TransFans should invest their money elsewhere.

Last of the deluxe TR figs is Skullsmasher. In G1 he was called Skullcruncher. I can only assume Hasbro renamed him for license reasons. This alligator Headmaster is probably one of the most unique in the world of TF. I mean, what other figure transforms into an alligator? And on that point, Skullsmasher is awesome. I love his alt mode. The toy designers really hit it out of the park with the look of the mechanical alligator. That alligator head mold has to be seen to be believed. Even the paint job is superb for a $15 toy. Some parts of Skullsmasher have this shiny, metallic finish that you only find in MP or 3P figures, and I commend Hasbro in this application. However, I mentioned that this is my least favorite of the 4 deluxe figs. Transformation and robot mode is where this figure falls apart, literally. Construction of the figure is beyond poor. Many joints are way too loose, and I guarantee you some limbs will fall off the first time you transform the figure. Holding action poses for Skullsmasher in robot mode is difficult if not impossible, due to the weak joints. Some glue or nail polish application in the ball joints should address this, but it’s not something I should have to do. Skullsmasher is recommend for hardcore G1 fans only.

Hasbro, IDW, Paramount, and whoever else is behind the Transformers have been super inconsistent with Sentinel Prime’s appearance. He’s a large and pinkish-red modern fire engine in the Movie-verse, a medium size blue pick-up truck in TF Animated, and (mostly) various shades of orange and yellow in different CHUG lines. Even when focused strictly on CHUG, it’s hard to pin down Sentinel’s appearance. And due to that reason, he’s the perfect character for a first lease of a new mold. Hasbro does this because hardcore fans like me would buy anything when it’s a new mold, then they repaint this mold with a more famous character later and I’ll buy it again (damn you Hasbro). In this case, TR Sentinel Prime is using a mold designed for Astrotrain, which they intend to release later. The body styling resembles Astrotrain, and he’s got a space shuttle alt mode and a train alt mode. All Hasbro had to do is repaint the mold and give the figure a new Titan Master for a different head design. Personally, I think this mold is not half bad. But it’s more appropriate to look at this mold in more detail when Astrotrain is released, so I’ll reserve final thoughts til then. But I will say this now… Sentinel Prime is way too orange. It kind of makes for a goofy looking Transformer.

Last in this TR lineup, but certainly not least… behold… Galvatron! Hasbro has not made that many direct G1 updates of Galvatron in the modern era. The only one I can think of is the deluxe Generations fig that was released in 2008, which was way too hard to transform to be any fun, and no Galvatron fig should be smaller than voyager class. Age of Extinction Galvatron doesn’t count as a real Galvatron. Combiner Wars had Galvatronus (formed with Cyclonus as the main body), but that’s not a standalone figure. So a real voyager sized, G1 inspired, and standalone Galvatron figure is a real treat! And Hasbro did not disappoint. TR Galvatron is the definitive CHUG Galvatron that we have been waiting for. The figure comes packaged in robot mode. This is hands down the most show accurate looking Galvatron produced to date (not counting 3P products). The figure in robot mode is well built and nicely proportioned. I don’t detect any construction issues, and he’s got enough articulation for some nice poses. He’s voyager size, so he scales well with other leaders of this size, such as Optimus and Cyclonus (quick sidebar: I hope Hasbro will one day make a CHUG voyager size Rodimus Prime, but that’s for another day). This Galvatron is both a Headmaster and a Triple Changer. I can see some G1 purists scoff at this change, but I personally don’t see it as a big deal. One alt mode of TR Galvatron is the futuristic Howitzer-like cannon first made famous in the G1 Movie, and the other alt mode is a jet with the huge orange cannon attached in the front. Both alt modes are pretty cool. The transformation mechanism is well designed and superbly implemented. Some parts in certain configurations could probably have been better tabbed in, but it’s a minor gripe. The Titan Master feature is ok. Hasbro chose a weird implementation where there is a helmet that flips out over Galvatron’s chest and it covers the head. I guess this was done so you can use any Titan Master figure with Galvatron. It looks ok, but I still wish he had a non-Headmaster head. I’m hoping that some third party will make a separate, G1 accurate head for TR Galvatron. I highly recommend this figure. Despite some minor negatives, it is the best official Galvatron figure made. Go out and get yours if you haven’t already.

Oh, I should mention that I also got Stripes this month. I found Stripes on the very last day of the month. Seriously, I took all the pics for the figures I got this month earlier, thinking I won’t find anymore. Then Stripes sneaks in on me on the last day! I think Stripes is a totally made up character. This mold is meant to be for Ravage, and the release of Stripes is just another quick cash grab for Hasbro (like Sentinel Prime before Astrotrain). I should have just left him on the shelf at Target, but the TF collector in me won’t let me. I’ll go more into Stripes when I do my purchase post for next month. I found the other 2 figures in the same wave as Stripes next month, so it makes more sense to mention him then.

Combiner Wars

By the middle of 2016, the number of CW figs have dwindled. TR is now in full swing, and that is now the active line considered to be CHUG, catered to mature, adult collectors of TF. Nevertheless, some CW figs are still out there. And here is one that I did not purchase during it’s initial release: Leader class Starscream.

I love Starscream. There is no other character like him in the entire TF universe. I try to get all Starscream figures produced in MP or CHUG form. I bought CW Leader class Starscream one day before I started my new job (on Hasbrotoyshop via eBay). This Starscream is an exact repaint of Leader Thundercracker that came before it. And for that reason, I won’t go into too much detail. I don’t like paying full price for something so similar, so I waited for a bit of a sale before committing to buy. But know that he does come with the bling-bling crown he wore during his gaudy coronation ceremony, shortly before being vaporized by Galvatron, in the 1986 movie.

Masterpiece

The lone MP figure this month is Ramjet. And I’ll get right to it… he’s disappointing. I wanted to like this figure, I really did. Hasbro and Takara have pumped out so many repaints of the 2nd generation MP seeker, and like an addict I bought all the US versions (including Thundercracker, Acid Storm, and Sunstorm). And I think that’s part of the problem… Hasbro/Takara has used this mold way too many times. I have been told that, when a mold gets used for manufacturing repeatedly, the later batches of figures comes out vastly inferior in quality to the early batches. I don’t exactly understand the specifics of why that is. But many industry insiders have assured me that this is a common problem. In the case of Ramjet, I understand that he’s reworked quite a bit off the standard MP Seekers. But most of it is still the same, and I’m betting this mold is getting seriously old and worn down that the end product is just one lousy mess.

The real problem with the figure is in the construction (probably from the bad mold I just described). It’s most evident in the robot mode. Most of the joints are way too loose, especially in the legs. The arms ain’t much better. Supposedly, this figure was already delayed because of serious issues with the shoulder joints. Takara recalled the figure from the retailers, and they went back to the factory to be repaired. I don’t know, in the end they’re still kinda bad. I would hate to see how this was before the repairs. In robot mode, this figure does not feel like a cohesive whole in the least. The overall design also don’t help matters. This mold was meant to be for the standard Seekers, and modifying it for Conehead Seekers feels like a tacked on design choice. The head transformation is bizarre. The jet nosecone kind of just hangs off the back of the robot mode, and there’s nowhere to plug it like the standard Seekers. Coneheads have their wings on their legs, and doing that in this mode, the robot mode looks too bulky below the waist. Combine that with the awful construction and you get one jumbled disarray of a figure. Takara took the cheap route and decided to rework an existing mold. They should have re-designed the Coneheads from the ground up.

I do like MP Ramjet’s alt mode. It looks show accurate. Some of the transforming mechanism is worthy of recognition. I like how the missiles cover over the guns. Some of the wing and thrusters additions are quite neat. Everything else is what you have seen before. Below are some pics of the alt mode, since this is the better mode.

With Classic Ramjet

MP Ramjet is not at all recommended. The nice alt mode is not enough to save it from the painfully crappy robot mode. And when I think that I paid $179.99, it really hurts. You may want to consider ToyWorld Combuster (or Jets) if you are in the market for a MP sized Ramjet.

To this day I still don’t have a 2nd generation MP Starscream. I missed out on MP-11 when it was first released, and I never found the TRU exclusive US version in store. But I got a MP-11 re-issue on pre-order. I sincerely hope that this re-issue will be better built. Though I have heard that the TRU version is horribly flawed in construction… so I’m keeping my fingers crossed.

Third Party

The first of two awesome 3P figures this month is ToyWorld Muddy, their homage to Sludge. Just like Iron Dreg last month, I also bought Muddy on sale, and he was shipped to me this month. Out of the 4 TW dinos that I now have, Muddy is my favorite. This may be because I never had a Sludge figure. But Muddy is genuinely impressive. The dino mode is fantastic. I love how he looks as a brontosaurus. In robot mode he looks cool too. I had reservations at first, because I thought having the dino front legs hiding in the wings in robot mode would look weird. But having the figure in hand, it really doesn’t look bad at all. And because of that design, the transformation from dino to robot works really well. He’s fun to pick up and play. The transformation is not difficult by any means, but at the same time complex enough for older collectors. One common gripe among fans is that his sword is too small. Yes that is a legitimate complaint, but seeing as how it’s made to compact itself into the neck in dino mode, I’m willing to give TW a pass. Having room to account for all accessories in every mode is always a plus in my book. Like I said already, I think Muddy is the best TW Dinobot out of the 4 that I have. Corelock (Grimlock) has an awesome T-Rex mode, but his robot mode leaves a bit to be desired. Roar (Snarl) is a good figure, but his tail keeps coming off during transformation. And as for Iron Dreg (Slag), it feels like TW didn’t update him enough for today’s standards. Muddy is the only one out of the four where I don’t detect any obvious weaknesses. I like both his modes, he’s well built, transformation is fun, and he’s a good modern update that will do Sludge proud. Muddy is a figure that belongs in your collection.

I reserved the best for last. My fellow TransFans… I am proud to give you (drum roll please)… Carry! Yeah, that name doesn’t do it for me either. But this figure takes 3P TF engineering to new levels. Carry is a homage to Rodimus Prime by DX9. I touched on this figure when I did my purchase post for June 2016 (pictured with Alpha Pack). Hasbro/Takara has given us only one Masterpiece Rodimus Prime figure (MP-09). That figure was met with mixed reactions from fans. Earlier in 2016 there was a MP release for Hot Rod. This figure is awesome, but it’s Hot Rod and not Rodimus Prime. So there is certainly room on my shelf for a 3P Rodimus Prime in MP scale. DX9 answered the call… and the result is amazing. Both modes are great representations of Rodimus in Prime form. He scales nicely with other MPs. Construction of the figure is nothing short of superb. And the transformation engineering of this figure is where DX9 Carry really shines. It is times like these that I wish I did video reviews, because writing about the transformation really does not do it justice. DX9 implemented some very clever mechanisms in the way that Carry converts from vehicle to robot and back. The process is smooth and fluid. The mechanics proceed logically from one step to the next. The transformation is complex yet intuitive. There are lots of steps in the process, but you really don’t feel stuck at any one time in the overall paradigm. He’s a great figure to just pick up and play, and at the same time there’s enough going on that this figure easily classifies as MP. And unlike MP Rodimus Prime, Carry is able to transform from robot to truck without external attachments. The entire truck is wholly contained within the figure. And what’s more amazing is the size differential between robot and alt mode. Carry in alt mode is only about voyager size, but in robot mode he is fully MP size. Some fans have complained that he’s too small in alt mode, but I see this more as testament to the great engineering of the figure. Another minor nitpick from some fans is how his wings appear in robot mode. Personally it doesn’t bother me. Carry comes with a Targetmaster figure. This fig is ok, but in gun mode he can be too heavy for Carry to hold properly. I don’t think of Rodimus Prime as a Targetmaster anyway, so I usually have Carry use some other weapon. The rifle from CW Silverbolt is a good substitute. I got Carry on sale at $129.99, but even at the full retail of $169.99, he’s worth every penny. I give Carry the highest possible recommendations.

Arise, Rodimus Prime

Since there are so many TFs this month, I thought it would be fun to take some group pics. Check them out below! (And like I mentioned already above, no pics of Stripes. He’s coming next month… promise.)

The Autobots:

The Decepticons:

Titans have returned! Transform and Roll Out!

 

Finally! We have come to the end of 2015. Here are the purchases for the last month of 2015.

• Combiner Wars Devastator, tfsource.com, $109.99

• Masterpiece Exhaust, hlj.com, $44.51

• FansProject Function-X4 Sigma L, tfsource.com, $69.99

• Warbotron Whirlwind, gift

This may be the first month were I only got Decepticons! Long live Decepticons!

First on the list is Combiner Wars Constructicons and Devastator. This group needs no introduction. The Constructicons were the first combiner group to debut in G1, and I’m glad Hasbro is doing this team justice by giving them unique molds that are completely different from the rest of the Combiner Wars line. I reported on this set back in this post and this post, and at the very last month in 2015 I finally have this awesome set in my hands. For it’s 2015 Black Friday sale, TFSource was letting this go at a very reasonable price. I wasted no time buying these Constructicons as soon as I saw the sale.

Individually, each Constructicon look quite nice their vehicle modes. They are true to their G1 appearance, and build quality is solid and robust. In the individual robot modes, some figures are better than others. Long Haul is one fig that looks quite awful in robot mode. And that is clearly because of the function he serves in combined form. And that combined form is the main attraction of the set. So without further ado, I give you… Devastator!

Now that is an awesome Devastator! He is freakin’ huge! Check out the pic below of him next to a standard deluxe size CHUG Seeker.

Hasbro has done some pretty stupid stuff with combining robots in the past, such as the Movie Devastator and Power Core Combiners. You may be left jaded after buying those products, but believe me, all is forgiven after seeing THIS Devastator in person. I don’t know if this figure is meant to scale with CHUG or MP figs, but it doesn’t matter. He’s so big and tall that his size would be appropriate when displayed next to either set. This combiner is solid. The leg combining mechanism is quite clever. It’s easy to do, and at the same time provides a most solid connection. The body and arm connections are more standard fare when compared to the 3rd party Devastators, such as TFC Hercules and MakeToys Giant.

Much like all the modern Constructicons, Devastator’s head is part of Hook, and no connection pieces are required between any of the six components. The only extraneous pieces are the forearms, fists, chest shield, and Devastator’s gun. Hasbro has designed places for them in alt mode, and they can be used as accessories in robot mode. Glaringly missing are the individual hand held pistols for each figure in robot mode. Not a big deal if you ask me. In G1, it was difficult to remember who had which gun. And this set was meant to be displayed combined in the awesomeness that is Devastator.

Devastator has got some limited poseability. He’s got all the standard articulation points that you would expect, but as a combiner the range of poses would be more limited than a standalone figure. Personally I don’t think that’s an issue. This figure is so big, so solid, and looks so G1 that you have to get it if you call yourself a G1 fan. Sure, there are some 3rd parties out there now that are doing Constructicons that may be superior (such as ToyWorld and Generation Toys), but their sets would cost 6 times as much. For the price, the Hasbro set can’t be beat. Get this now if you haven’t already. You won’t regret it.

Next up we have Masterpiece Exhaust. I’m not familiar with this character at all. His origin may have been from the Japanese continuation of G1, but I could be wrong. I got him because I love the MP Wheeljack mold. Plus HLJ was having a pretty good sale on the figure. Exhaust looks absolutely stunning in his alt mode. His flashy and vibrant colors adds a lot to the already beautiful Lancia Stratos Turbo. This alone is worth the price of admission. I like the new head mold in robot mode, and he comes with plenty of extra accessories, including Wheeljack’s “Immobilizer” from the famous G1 episode of the same name. Construction and transformation is just as solid as Wheeljack. I highly recommend this figure even if you already have Wheeljack.

Now onto the 3rd party offerings for the month. Function-X4 Sigma L is by FansProject, and this is their homage to Mindwipe. Function-X is the label that FP uses for all their HeadMaster figures. I was really impressed with Function-X3 Smart Robin (aka Brainstorm). I have G1 Mindwipe from back in the 80s (and still in pretty good shape too), and TFSource had a sale on this Sigma L. For all these reasons, I got the figure. Overall, I say he’s ok. I like the robot mode, and I definitely like the twin shotguns, even though he had nothing of the sort back in G1. In this mode, the wings kinda get in the way, so it becomes difficult to have him posed with the arms raised in any way. He looks fairly cool in bat mode. Construction of the figure is solid. I was hoping that Sigma L would offer some new ingenious mechanisms in transformation like Smart Robin, but that’s not really the case here. It seems like FP decided to give their own spin on this figure. Like they took Dracula and vampires and adapted that whole motif to a HeadMaster robot, the result of that being Sigma L. I applaud them for giving Mindwipe a new spin, but all in all I’m not quite sure it works. There are no obvious shortcomings with the figure, but at the same time it doesn’t wow you either. I guess I give this fig a weak recommendation. If you need a Mindwipe to complete your HeadMaster collection and you find this fig at less than retail, then go for it. Oh, and the name. Why he’s called Sigma L is beyond me. When I see Function and Sigma mentioned in the same phrase, I keep thinking this is some kind of math equation here. Like let’s get the Sum L from this Function X.

Last but not least, there is Whirlwind, Warbotron’s interpretation of Vortex. Whirlwind is a Christmas gift from my wife. This is my 2nd fig in the Warbotron Combaticons, after Sly Strike. I like Whirlwind. I don’t think he’s as good as Sly Strike, but he’s solid nonetheless. He looks great in robot mode. I like all the different ways that the helicopter blades can be configured in this mode. You could leave them on the back, like the Vortex G1 look. Or you could put two on each forearm, and have them point back up the shoulder in rest position, or have them point forward like he’s Wolverine. Or use two in each hand (one up one down), so it looks like he’s wielding 2 twin blades, like if Darth Maul wielded 2 twin-bladed lightsabers. I like his colors in this mode, very G1. Some G1 purists complain about the clear orange canopy on the chest in robot mode, but I think it’s fine. I don’t think it’s distracting at all. In alt mode, the helicopter comes together quite nicely. My biggest gripe in this mode is that, when you spin the main rotors, they would often times make contact with the tail fin rotors. I also don’t like how the front nose cone area of the helicopter is formed by attaching a shield/pistol accessory. Makes me feel like he’s a bit of a parts-former. Constructions wise he’s pretty solid for the most part, but there are more tolerance issues when compared to Sly Strike. Some accessories don’t peg in as well as they should. But overall I still recommend Whirlwind. He’s a worthy addition to your MP-scaled Decepticon lineup.

Below is a pic of some of these figs, in what appears like a bunch of random Decepticons jammed together for one photo shoot. I had these figs scattered about here and there at the time, so I gathered them all up for a pic. Clockwise from top: Sigma L, Scavenger (from CW Devastator), Exhaust, and Megatronus (who snuck in there for no good reason).

Since Whirlwind is not in the pic above, he gets a solo shot.

He also gets a shot of him looking up at Devastator, waiting for the rest of his teammates so Bruticus can devastate Devastator.

Not only was this month all Decepticons, this month was also all on-line purchases. No in-store purchases whatsoever. Not too surprising considering the items acquired. And not counting Whirlwind since he was a gift, all figures were bought on sale. I am the ultimate TF bargain hunter!

That is all for 2015. I’m gonna compile some stats for 2015 and have them ready for the next post. Stay tuned my fellow TransFans. Transform and Roll Out!

Happy Holidays! Today I am documenting all the TFs acquired back in Dec of 2014. I fully realize that’s one whole year ago. I know… I’m getting behind on my blogging. It’s just so hard to find the time. I am beginning to think I should make more frequent blog writing my new years resolution. But that’s a story for another day. Here are the TFs for the last month of 2014.

• Transformers Prime Beast Hunters Prowl, Walgreens, $7.74

• MakeToys M-F-B, BBTS.com, $12.99
• DX9 004 Armor Set, BBTS.com, $44.99

• Generations Thrilling 30 Brainstorm, BBTS.com, $26.99

TF Prime Beast Hunters Prowl is a repeat purchase. I got one back in June of 2014. The one this month was a random find at Walgreens. He’s rare, he was only $7.74, so I figured why not. I kept him unopened all this time. Maybe he will be worth something someday.

The DX9 004 Armor is for Age of Extinction Evasion Mode Optimus Prime. That figure is one of the first figs I got from the AoE line, and one of the best from that line. When I heard of a armor upgrade that would make him more like Powermaster Optimue Prime from the fifth toy season of G1, I was immediately intrigued. I never heard of DX9 at the time, but I looked at enough pics online to take a chance on this set. I am happy I bought the set. With the armor attached, the figure feels way more G1 like. I especially like the head mold. There are some tolerance issues though. The feet pieces are way too tight. You will need to either sand down the pegs on the feet pieces, or make the feet holes bigger on the figure. I only tried this upgrade set in robot mode. These same pieces also can attach in alt mode, but I didn’t try it.

The MFB from MakeToys is acronym for My First Blaster. I am told this weapon for Swerve makes an appearance in the comics by IDW. I won’t comment anymore as I’m no authority on the IDW-verse of TFs. The weapon itself is pretty cool. Be aware it does require some assembling. I’m a terrible model builder, so I already broke off one piece when assembling this. Also, this weapon is designed to go with MakeToys Trash-Talk, or their version of Swerve. This weapon will not operate with the official Hasbro Generations 30 version of Swerve (coincidentally also purchased in June of 2014). I bought it thinking that it would. The pegs are not the same size. Should have done my research first.

Last but not least, there is Generations Thrilling 30 Brainstorm. I first saw this at BotCon 2014. I could not believe my eyes when I saw this. I mean… if Hasbro was gonna venture into Headmasters, that opens up a whole world of possibilities on what they are willing to re-make in this modern era. I’m salivating just thinking about it! Anyways, Brainstorm is an excellent figure. He’s fairly simple in transformation, but in my opinion that’s a good thing. Modern TFs are so darn complicated sometimes that I just want something I can pick up and play. Brainstorm fits that bill. If I have the figure handy, I can sit there and transform him back and forth repeatedly, like I did all my TFs when I was a kid. Both modes look nice. As a voyager figure, he’s bigger than some of the third party Brainstorms that have been produced (such as Smart Robin). Oh, by the way, there are two versions of this figure. I got the fixed version, code 42791. Click here for more detail.

OK, that does it for the figs in 2014. Now I can move onto 2015… in 2016. I know… I suck. But I will get this done and get up to date like I used to be. Transform and Roll Out!