March of 2018 continues with a random assortment of Transformers. And for the first time in a long time, there are two purchases for the same character! I’m not sure if the last time this happened was February of 2016, when I got two Onslaughts. You can try to guess the lucky Transformer that this happened to, or just scroll down to see who it is.

• Power of the Primes Rippersnapper, amazon.com, $16.99

• Power of the Primes Elita-1, Walmart, $24.97

• Studio Series Thundercracker, Toys R Us, $29.99

• Power of the Primes Sludge, Target, $16.99

• Mech Fans Toys Slurdge, eBay, $20.99

• Kubianbao MCS-01 KBBMP10-V, eBay, $42.99

Rippersnapper

I went into Rippersnapper and the rest of his Terrorcon cohorts back in this post. But to quickly summarize, all the Terrorcons are pretty good. Terrorcons are the ultimate version of combining figures that started in Combiner Wars and then evolved to peak form in Power of the Primes. Rippersnapper is a required purchase if you collect the combiner teams.

Elita-1

It’s good to see that Hasbro is continuing the trend of properly releasing fembots in the CHUG-verse. What I mean is that these are new molds introduced in CHUG, made specifically for the character they represent, and not repaints of other TF lines. It started with Generations Thrilling 30 Arcee and Chromia, in late 2014 / early 2015.

Elita-1 in PotP is the next fembot to continue this treatment. We got this mold for Starscream, back in December of 2017. It’s debatable if this should be classified as a prepaint. Starscream is the more famous character, but this mold was always meant to Elita-1. Using it first for Starscream was another quick cash grab on Hasbro’s part.

As for the toy itself, I think it’s just ok. None of the three modes are all that good, if you ask me. The jet mode is too bulky. The robot mode has too much kibble. And the combined body mode doesn’t serve the purpose well, when compared with superior body combining figs like Hun-Gurrr or Silverbolt. Transformation between jet mode and robot mode is so simple it’s not even worth describing. Making Elita-1 the body of a combiner seems entirely unnecessary. A superior figure could have been made if the mechanics needed to combine were left out. I suppose the only real reason to get this fig is to have a proper CHUG version of Elita-1. She is a character that only true G1 fans would know about. If you know nothing of the character, then it’s best to leave this figure on the store shelf.

I will point out that this figure has a terrific head mold, which may be its one redeeming feature as a toy. Check out the pic below. This head design is derived directly from the G1 animation. That’s right G1 fans. Hasbro loves you.

Thundercracker

Studio Series Thundercracker is another Hasbro cash grab. I was under the impression that Studio Series were all new movie molds, but that’s simply not the case. This Thundercracker is a repaint of Nitro from The Last Knight. As good as that figure is, I don’t think this repaint is all that relevant. I don’t remember Thundercracker making an appearance anywhere in in the movie-verse.

Still, I got this fig because he is a Toys R Us exclusive. And because I knew this was gonna be the last thing I buy from Toys R Us. If you don’t have Nitro, or if you dig that figure in these blue and grey colors, then go ahead and buy Thundercracker. Otherwise, this purchase is not recommended. I still have not opened Thundercracker to this day. I’ll probably re-sell him someday.

Sludge

Continuing with Dinobots in Power of the Primes, Sludge makes his appearance this month. He is a solid edition to the team. Both modes look good. Transformation is a bit on the simple side, but it’s different enough from the usual way Sludge transforms to make this figure refreshing. PotP Sludge is a great toy to just pick up and play.

Transformation from robot to dino deserves some explaining. There are some key variations from the usual G1 Sludge transformation scheme. Flip up the dino head and neck from the back, but a rotation of the neck is necessary. Close the wings like normal, but the wings form a full closure, and the contact point is where the dino back is. The waist needs to rotate 180, then fold the robot legs. Forearms need to rotate 180 so the fists face the other side. Those are the key differences. If you followed all that, you will see that the back of the dino is where the robot chest is housed. All other transformation mechanics are there to account for that difference. It sounds complicated when I describe it, but it’s really not. Like I said, PotP Sludge is simple for anyone to transform, and that goes double for any TransFan who’s been around since G1.

If you got the other PotP Dinos, then you will get this regardless of what I say. And if you don’t, get Sludge anyway.

Slurdge

From Sludge we go to Slurdge. That’s not a mis-spelling. Slurdge by Mech Fans Toys is 4th party, which means it’s a KO of a 3rd party product. I know next to nothing about Mech Fans Toys. Even their name sounds like a ripoff of Fans Toys.

MFT may think that they can add “r” in there and no one is the wiser, but it doesn’t take a rocket scientist to see that this is Sludge. And Yes, Sludge the character get the proud distinction of being represented by 2 different figures in the same month. I believe MFT Slurdge is a KO of a DX9 product. Though MFT did give it way better paint. Look at all the bling on Slurdge in the pics below.

The only other MFT product I have is Grmlock. Be prepared for a good workout, because both MFT products will test your hands when transforming. There are some moving pieces on these figures you will have to pry open. Both high strength and high dexterity are required.

Transformation scheme of Slurdge is also unique. It deviates from the standard G1 scheme, even more so than PotP Sludge. What folds up from the robot back to cover the robot head is the dino tail, instead of the dino neck and head. The robot arms become the hind dino legs. The robot chest needs to flip down, then rotate and fold downwards toward the robot legs. The dino front legs and neck and head are all folded inside the robot legs, and they need to come out. Stretch out the robot waist then fold the robot legs unto itself. This is most definitely an original implementation of how Sludge transforms. And the dino mode looks so good. See below for yourself.

Playing with the figure can be a chore. In addition to the tight joints, some bits and pieces need to be angled perfectly to have enough clearance to get to where it needs to be.

Slurdge comes with a black gun (pictured above) and a clear red sword (not pictured).

All in all, I like this MFT figure. Yeah it’s a KO of something else, but they did add nice paint to their offering. At a price point of being in the low 20s, it doesn’t break the bank. Dinobot fans should check this out.

On a related note, most of the modern Sludge figures made have original transformation schemes from G1. The only Sludge that follows the G1 scheme is Fans Toys Stomp. Mech Fans Toys Slurdge, ToyWorld Muddy, and Power of the Prime Sludge described above all implemented a new unique scheme.

So who wore it better? PotP Sludge or MFT Slurdge? I’ll be doing a in-depth analysis of these 2 in an upcoming post. Stay tuned.

KBBMP10-V

For those of you that are unfamiliar with Kubianbao (KBB), they are another KO company. As far as I know, none of their products are original creations. They tend to make KO figures out of official HasTak products. Now that’s not to say what they produce is bad. In fact, many TransFans have stated their figures are superior to what HasTak churns out. A prime example of this is their version of official MP Seekers. HasTak has used that mold so many times now that the later production runs are plagued with build and construction issues. KBB, being KO and all, does not have such problems.

KBBMP10-V is Kubianbao’s KO take on the MP-10 Optimus Prime. However, this figure is now downsized to Voyager scale. KBB didn’t even give this a name, they just called it KBBMP10-V. So let’s break apart this designation: it’s from KBB, a KO of MP10, at Voyager scale. KBBMP10-V. Very apt.

Now you might be thinking to yourself, “KO is crap!” Well, let me state this now with no uncertainty: MBBMP10-V SCREAMS QUALITY!!! Everything from the packaging to the figure to the accessories, MBBMP10-V is produced so well that HasTak should be ashamed of themselves for not being up to par. Let’s start by looking at the box.

The box is made of high quality hard cardboard, not unlike the kind used for Warbotron Turbo Ejector. Are you seeing this Hasbro? KO products are doing it better than you.

Paint and finish of the figure is top-notch. Below are some pics of the truck mode.

Transformation of the figure is just like MP-10, so I won’t go into it too much. Below is a pic of the robot mode with a nice rub-on decal on his left shoulder (duplicated from this post).

Look at all these accessories!

• 3 extra heads: 2 are a different style of Optimus, and 1 is Orion Pax
• energon axe with energy ball attachment
• standard Optimus rifle, folds and stores onto the back like the official MP-10
• Megatron in alt mode with shoulder stock attachment
• jetpack (only used once in the cartoon, but it’s become an OP accessory staple)
• sword (used by OP in the movies)
• Matrix of Leadership; not pictured, can be placed inside KBBMP10-V

I highly recommend KBBMP10-V. Essentially, it’s MP-10 scaled down to voyager size. So if you need a G1 accurate OP to go along with your CHUG figs, this is the toy to get. It may be KO, but it’s so well done. And at only around $40, you’re getting a quality figure in a quality box with tons of accessories.

That’s it for this knock off heavy month. Will I ever buy more KOs in a single month than legit and 3P products? Only time will tell.

Transform and Roll Out.

 

First came Combiner Wars. Then came Titans Return. Now we are at Power of the Primes, the third and final installment of this toyline. Collectively, the three arcs form Transformers: Prime Wars Trilogy.

There is a backstory to each of the toy arcs. The link above to the Wiki page explains more. Toy-wise, Combiner Wars focused on Combiners (duh) and Titans Return put an emphasis on Headmasters (called Titan Masters). Power of the Primes kind of merged both of these gimmicks. This toyline features Prime Masters that are similar to Headmasters, but at the same time many combining figures are also introduced.

The Terrorcons are one of the last Combiner Team that Hasbro would release as part of the Prime Wars Trilogy. I was kind of waiting for HasTak to release this group, since they did release their opposite number, the Technobots. And it was worth the wait! HasTak has obviously learned their lessons from doing all the previous Combiner Teams. In my opinion, the Terrorcons are the best Combiner Team that uses the standard Combiner Wars mold (Aerialbots, Combatcions, etc). I say this for many reasons. Let’s start the review.

Each Terrorcon is sold separately. They are packed in their robot modes.

Hun-Gurrr

The awesomeness starts with Hun-Gurrr. This is the leader of the Terrorcons, and he forms the body. Hun-Gurrr is famous for saying “Hun-Gurrr hungry” in the G1 episode “Money is Everything”. I never tire of hearing him say that. So dumb yet so direct.

Hun-Gurrr is a heavily modified remold of Combiner Wars Silverbolt (who was also reworked into Cyclonus and Scattershot). But seriously, so much is reworked for Hun-Gurrr that you can argue this is a unique mold of it’s own. All the jet pieces you would find in any of the previous molds are gone, and are now replaced with new monster bits. He gets a new head mold for his robot form, and also a new head for the combined mode.

Both modes look good. Transformation from robot to two-headed monster is on the simple side, but that’s always been the case with Silverbolt and any of the derivatives. The main difference here is that the feet and legs form the twin heads with long necks. So instead of tucking them under where the wings would normally go, you leave them out and about to gobble up unfortunate Autobots.

I have said before that of all the Prime Wars Trilogy combining body figs, the Silverbolt mold provides the best stability in combined form. That is still true here. But Hun-gurrr ups the game even more. Everything properly tabs into place. I’ll go into this more later in the combined form. But in its individual modes, Hun-Gurrr provides tab connectors where there should be. Not only does this provide stability, it’s a confirmation that you’re doing the transformation right. Hun-Gurrr is hands down the best Prime Wars combiner body fig produced, because all 3 modes work.

Blot

Blot is the stinky foot soldier of the group that the other Terrorcons try their best to avoid. He transforms into some kind of big purple bipedal type monster.

Of all the PotP Terrorcon limbs, Blot is my favorite. For starters, I think he has the best looking robot mode, because all the monster bits are best hidden when compared to the other limb Terrorcons. I also like his color scheme of purple and dark blue.

All the limb components share similar transformation motifs. But within that same framework, Blot is the most unique. His legs fold backwards to form the monster back, instead of simply collapsing into the body. I love his fist-to-claw transformation. You flip the fist backwards, and that would rotate out the middle claw. Very very cool. In robot form, the monster head is neatly hidden on the robot back. For transformation to alt mode, the monster head comes up and out, while the robot head goes underneath.

I think this is the most unique looking monster in the group, so I like him. The placement of the over-the-shoulder weapon in monster form is also G1 accurate.

Cutthroat

Cutthroat is the bloodthirsty one of group, with a crazy and barbaric fighting style that even other Decepticons find disturbing. As a sidebar, why is it that every beast subgroup has to have a flyer? Dinobots have Swoop. Predacons have Divebomb. Pretender Monsters have Wildfly. And Terrorcons have Cutthroat. In sitcoms and dramedies of eras gone by, there is often a token black guy. Cutthroat is the token flyer.

PotP Cutthroat is an ok fig. I say that because he could have been great, if not for one flaw. And it’s that the bird head piece (and sometimes also the bird mouth piece) will unavoidably come off during transformation. I have transformed this guy back and forth 5 or 6 times now, and that head will come off each time. This is because the side pegs that hold in the bird head is super loose, while the assembly that the head sits on is super tight to rotate up or down during transformation. I have come to just take the bird head off during transformation, then re-attach.

Other than this flaw, the fig is not too shabby. The face sculpt is amazing. I think this is pretty accurate to either the G1 animation model or the G1 toy box art. I also think this face sculpt would work great for Thunderwing, if they wanted to make a figure of him in PotP. The rest of the fig in robot form is well-proportioned.

Transformation to bird beast is fairly obvious, so I won’t describe it. Again, the bird head coming off is an issue. Other than that the fig is solid. The wings transform well and has no tolerance issues.

There’s nothing too surprising about the alt mode. It’s pretty much the kind of bird monster alt mode you would expect from a $15 toy. It’s functional and it works.

Rippersnapper

Rippersnapper is some kind of amphibious mechanical fish monster with arms and legs. His Tech Spec Bio mentions a massive inferiority complex, but I’m quite sure neither the cartoon nor the comics went into that.

I like PotP Rippersnapper. Overall he reminds me of Blot, but he’s different enough to not feel like buying a repeat figure just to complete the group. Both his modes seem very G1 accurate, and I like his overall color scheme. In robot mode, I like how he still has the monster claws on the back of his hands. Very Wolverine like.

There are no surprises to the transformation. If you look at both modes and mentally imagine how the transformation would be, that’s how it is. The only unexpected piece is the monster’s tail that hides into the legs, which needs to be flipped out for alt mode. An obvious transformation does not mean that it’s not fun or it’s poorly done. Rippersnapper is a well constructed figure. Both modes look good.

I really like the design of Rippersnapper’s alt mode. I think out of all the limb components, this is my favorite monster in terms of appearance. The twin guns on the monster shoulders is very G1 accurate. The mouthpiece can be opened, and unlike Cutthroat, it does not constantly fall off. The monster mode is surprisingly articulate. Balancing the monster on two legs is not hard at all.

Overall, Rippersnapper is another fine addition to the Terrorcon group.

Sinnertwin

Sinnertwin is the second two-headed monster of the group. His Tech Spec bio mentions he likes to patrol the Terrorcons’ lair in the hopes of finding something unwelcome then killing them. Feels like another garden variety Decepticon. Strangely, nothing is mentioned in the Tech Spec Bio about the twin heads. I guess after Hun-Gurrr and Twinferno, another two-headed monster is not such a big deal.

PotP Sinnertwin is okay all around. He’s not bad, but not great either. This wacky green and yellow color combo warrants a visit by the Cybertron fashion police. In robot mode, there’s not much that stands out for Sinnertwin, other than the colors.

Transformation to monster mode is also pretty straightforward. However, he doesn’t seem to be constructed as well as the other Terrorcons. Blot and Rippersnapper are constructed well. Cutthroat has the one construction flaw of the bird head, but other than that, the rest of the fig is solid. Sinnertwin feels slightly off, for the entire fig. What I mean is that there are parts that should snap together or tab into place, but the pieces fall just short of coming in sync with each other. On my copy, the monster head won’t completely rotate and snap into place on the body, the legs don’t completely snap together, the tail has the same problem, and I can’t seem to fully rotate the robot legs to align completely with the body. There are tabs and grooves to help you locate where the pieces should go, but I can’t seem to fully get them there. Overall it doesn’t impair the functionality of the figure, but it does present itself as a minor distraction.

In alt mode, Sinnertwin is another monster with a cool design. I like the twin heads. They each have a working jaw, though getting them open takes some prying. The color scheme in monster mode works better than it does in robot mode.

Most buyers of PotP Terrorcons are looking to buy the whole set. But if for some reason you’re not, and is making purchase decisions on the individual merit of each figure, then I would recommend Sinnertwin as the last one to buy. The minor build issues irk me, and that color scheme is not doing it for me.

Below I present all the Terrorcons in their hideous monster forms.

Terrorcons, transform and merge into… Abominus!

Abominus

This is one awesome looking Combiner. Check it out!

It all starts with Hun-Gurrr. He is based off of the best Prime Wars Trilogy combiner body, so the combined form has the best stability. Not only that, HasTak improved on it by providing proper tabbing for all pieces of the body transformation. This gives the combined body extra support. The result is a stable Abominus that stands up well in the classic A-stance. Not only that, he is actually somewhat posebale in action stances.

Transformation to Abominus requires no extra pieces, other than the hands and feet. Hun-Gurrr comes with the two feet pieces, or you can elect to use the individual combiner pieces that comes with the limb Terrorcons. For the hands you must use the individual combiner pieces. The Abominus chest shield is built into the Hun-Gurrr figure, and will be wholly formed through the transformation to body mode. I cannot commend HasTak enough for the engineering designs on Hun-Gurrr.

The limb components are on par with other Prime Wars Combiners that have come before it, but the superior body figure means they can be better connected in the combined form. Also, there are no tolerance issues for attaching the hands or feet to the limb Terrorcons, as there were for some of the previous Combiners.

Abominus has got a great new head mold that pays homage to the G1 figure.

If you can only get one Combiner Team in the Prime Wars Trilogy, the Terrorcons are the team to get! This is the final evolution of the Prime Wars Combiners, and HasTak has corrected many of the flaws that plagued the previous Combiner teams. The Terrorcons may not be the most recognizable of the G1 Combiners, but if you’re reading this blog, the Terrorcons must mean something to you.

Terrorcons… Transform and Roll Out!