Archive

Posts Tagged ‘Scrapper’

Transformers Purchased in August 2018

March 11th, 2020 Comments off

Only 3 figures were purchased in August of 2018.

  • Power of the Primes Blast Off, amazon.com, $24.99

  • Power of the Primes Repugnus, amazon.com, $24.99

  • NBK Scraper, eBay seller, $13.89

Blast Off

I mentioned this Blast Off figure back in this post. Go there for all the details. In short, this was the Blast Off that should have been released in the United States all along. In that post, I listed him as being in Combiner Wars. Realistically that’s not wrong, since the rest of his Combaticon cohorts were from Combiner Wars. But technically Blast Off is released in the Power of the Primes line (written on the side of the box).

Power of the Primes Blast Off is completely representative of G1 Blast Off. He transforms into a space shuttle, has a head mold that resembles his G1 cartoon looks, and has a paint scheme that his G1 toy brother would be proud of. This Blast Off is an Amazon exclusive, much like what they did for Quickslinger (Slingshot) and Brake-Neck (Wildrider).

Here is a pic of him in the box.

As of this writing, I still haven’t tried combining this Blast Off as part of Bruticus. I’ll get to that someday, promise.

Repugnus

In G1, Repugnus is part of a little known Autobot sub-group called the Monsterbots. This was a trio of Autobots that transformed into monsters. They came around in Season 4 of the toys. I don’t remember them appearing in the limited 3-episode arc “Rebirth” that made up the entirety of US Season 4 cartoons. They may have had more of an impact in the comics and the Japanese continuity, but I don’t care enough about the group to look it up.

All 3 Monsterbots are now released in the Prime Wars Trilogy. Both Twinferno and Grotusque were relesaed in Titans Return. In Power of the Primes we get Repugnus. This is yet another Amazon exclusive. I guess Hasbro figured there would be a limited audience for this guy. For once I agree with them.

As of this writing, I still have not opened Repugnus. Based on pics I’ve seen, he’s a slight re-work off the Twinferno mold. The same goes for Grotusque too. In Prime Wars Trilogy, all 3 Monsterbots share the same overall motif and base mold, but HasTak did add or modify enough mold bits to make each unique. I am glad this trio has an update in this modern era for Transformers. But no biggie if you missed out on any of these 3.

Pic of Repugnus in the box below.

Oh, I also have a Titan Master Repugnus. This is still unopened. It may never get opened.

Scraper

Here we have another NBK knock-off product. NBK Scraper is a knock-off of Generation Toy Scraper, who is an homage to Scrapper. You gotta love the names of 3rd party and 4th party products. In this case they dropped one p; the name still works, everyone still knows who this is supposed to be. NBK is too lazy to even come up with their own knock-off name.

Scraper is my 2nd NBK knock-off, after Bulldozer. Scraper is packed in alt mode, and he is constructed just as well.

I really like the look of Scraper in alt mode. This is unmistakably Scrapper. In this mode, everything tabs together nicely. The giant shovel is at the right tolerance, and can be lifted up to stay up if so desired. Scraper rolls well on a flat surface.

Scraper comes with only 1 accessory, his pistol. In alt mode, it can be attached underneath the vehicle. Pic below.

Transformation to robot mode follows the usual Scrapper scheme. Two features are worthy of note, however. One is the arm transformation. They rotate to the reverse direction for robot mode. And in turn, the ladders on them needs to be rotated and flipped. Very cool. The other feature is with the driver area piece that sits on the back in robot mode. This piece is attached to a folding mechanism, allowing for different placement of it in alt, robot, and combined mode.

Like I said already, construction of the figure is good. So this transformation is not frustrating to do at all. Couple that with a familiar scheme, Scraper’s transformation is completely intuitive. But at the same time, Generation Toy incorporated some refreshing design choices. This is a fun toy.

Robot mode is pretty good for the most part. The joints work well, and figure construction is good enough to have him hold poses. Articulation is limited, mostly because of the giant back kibble of a shovel, and the two huge wheels on the shoulders. But this is part of his G1 design. He appears a bit stocky from how Scrapper should look, and that’s unfortunate. I do wish his proportions are more in tune with Scrapper’s lean G1 look. Bulldozer does not have such proportion issues, and for that reason alone I think Bulldozer has the better robot mode.

Transformation to leg mode for the combined form is pretty straightfoward. Looking at the pics alone is enough to see how it goes, so here they are.

All in all, I’m very impressed with how everything tabs together for this leg mode. This is great engineering design by Generation Toys. Of special mention is that the robot arms come around the back and tab together to form the heel (see above pic). The arms tab in to each other, and tab onto the body. There is ankle pivot for the leg mode, and which translates to waist pivot in robot mode. This is a very effective transformation to the combined form.

I’m so impressed with Bulldozer and Scraper already, that at this point I have made a conscious decision to buy the rest of this set. The other 4 figs will come in later months.

Much more to come next month. Til then… Transform and Roll Out.

 

Categories: On The Hunt, Pics

Transformers Purchased in June 2018

February 21st, 2020 Comments off

After a LONG hiatus from me documenting my monthly TF purchases, I’m gonna continue here. There’s a lot of TF purchase action in June. Let’s get started.

  • Studio Series Brawl, amazon.com, $29.99

  • Studio Series Megatron, amazon.com, $29.99

  • Power of the Primes Snarl, Target, $16.99

  • Power of the Primes Moonracer, Target, $16.99

  • Titans Return Trypticon, Amazon seller, $103.65

  • Zeta Toys Flyfire, gift

  • NBK Bulldozer, showz.com, $9.99

  • ToyWorld Constructor, chosenprime.com, $469.99

Brawl

SS 12 Brawl is my third movie Brawl figure. The first one is the original leader class figure that made 2 of my top ten lists (most difficult and broken). The 2nd one is the original deluxe figure, which I never opened. I really don’t have too much recollection of leader class Brawl. It’s a big figure, sitting at the bottom of a box in a closet somewhere. That’s the problem when you have too many Transformers; you just don’t have enough time for all of them.

It’s inevitable that there will be comparisons of this SS 12 Brawl to leader class Brawl from the first movie. And I can’t do that compare here. All I can do is rate SS 12 Brawl on its own.

Like all offerings in the Studio Series line, Brawl is packaged in robot mode, and comes with cardboard backing that may be used as the movie backdrop. In Brawl’s case, he gets a very fitting graphic of the battle in Mission City from the first movie.

Brawl’s robot mode much resembles his movie appearance. He only appeared in the first movie, but the toy designers captured his look in this figure quite well. Construction of the figure feels good. Joints are at the right tolerance, nothing too tight or too loose. There is a lot going on in this figure as far as weapons, but nothing feels out of place as the solid construction is able to keep it all together. Most of the fiddly bits clean up quite well in robot mode. And if something is dangling around, it is more intended as part of the design and not a production flaw. The back of the robot cleans up nicely too (which I should have took a pic). There’s not a lot of unwanted kibble on the back, so kudos to HasTak.

Brawl is a bit limited in the articulation category. Part of it is because of his design; he’s very bulky with lots of kibble, and that in itself limits articulation. The design of the feet, while movie accurate, don’t allow for any ankle tilt, which hinders poses. The hands are molded directly into the forearms, and don’t come out. Arm articulation as a whole suffers from all the weapons and extra kibble present all around.

Transformation to tank mode is fun. I don’t remember any other figure quite like SS 12 Brawl, not even the original leader class figure. The leg transformation is fairly straightforward. Arms form the tank turret, and they come together in an interesting and unique way. The hardest part to describe is the chest. This section folds on itself several times, and there are other minor pieces that complement this scheme to produce a robot to tank transformation unlike anything else we’ve seen before. SS 12 definitely gets points for transformation originality.

In my opinion, the thank mode looks really good. This is on par to the looks of the leader class Brawl figure in alt mode. In the movie, I think there is only one scene of Brawl in tank mode. It was when he was first summoned along with the rest of the Decepticons. This tank mode looks extremely close to that tank on screen. There are no working tank treads here, but I wasn’t expecting that for a $30 toy. With all weapons attached in tank mode, Brawl really looks like the menacing ground assault Decepticon that he is.

Brawl comes with 2 accessories: a missile launcher with 4 missiles, and a claw type weapon. Add to that all the molded-in weapons (the main cannon, 2 sub cannons, and 2 4-set missiles, all on the turret), he will give Age of Extinction Hound a run for his money as the TF with the most arsenal. I recommend SS 12 Brawl with no reservations.

Megatron

I never realized something until I started doing this post, and I had to confirm by looking at my TF List: I only have 2 movie Megatrons! Considering how many movie Optimus Primes I have, that’s almost a crime. The two movie Megatrons I have is Dark of the Moon voyager fuel truck Megatron, and The Last Knight voyager jet Megatron.

I never got the original jet leader class Megatron from the first movie, or the ROTF leader class tank Megatron. I didn’t want them as a silent protest to how Michael Bay completely butchered the G1 roots of Megatron and created this weird amalgamation that is supposed to represent the Decepticon leader. In retrospect, I kind of regret not buying them. From a pure toy perspective, they were unique, and Hasbro never released anything like them again.

So when I heard that the Studio Series are coming out with a new take on ROTF Megatron, I had to look into it. Here is the figure in robot mode.

I’m never gonna warm up to the looks of movie Megatron. I’m a G1 die-hard that will never recognize this as Megatron. But that being said, and rating purely on the toy’s representation of the movie depiction, I love the look of SS 13 Megatron in robot mode. His proportions are very balanced, and HasTak captured that alien bug-like appearance of Megatron really well. I like the giant sword weapon that he has in the right arm. All the mechanical tentacles on the left arm gives me a satisfying yet creepy conception of what could happen if they got hold of unsuspecting Autobots (or any other kind of prey).

Construction of the figure is solid. Megatron has the articulation chops for a variety of poses, and the solid construction allows him to hold those poses. For the most part, he’s a kibble-free figure. That’s not easily done with a design like his. Much credit to HasTak here.

SS 13 ROTF Megatron is not too shabby in alt mode, either. I like the look of this alien tank. I’m not sure how close it looks to the movie, though I will admit that my recollection of ROTF the movie is faint at best. I honestly don’t even remember Megatron in alt mode, but I’m sure there are fans out there that will correct me.

I do feel like SS 13 Megatron is one of those figures that, if you haven’t transformed it for some time, it will throw you for a loop. That’s especially true for robot to alt mode. This Megatron tank is alien, so there’s not the usual earth mode cues to go on. Everthing does tab into place, however, so you know you didn’t do something right if the resulting alt mode feels more floppy than solid. I think for that reason, I didn’t like this piece at first. But he grew on me, and on subsequent transformations, I regard SS 13 Megatron as one of the better figures in the Studio Series line. This figure gets my recommendation.

Snarl

Continuing the trend of the Power of the Primes Dinobots, this month we get Snarl. Grimlock, Slug (aka Slag), and Swoop were released in January, while Sludge came around in March. Snarl completes everybody’s favorite quintet of dinos.

He comes in robot mode, like all the other PotP dinos.

I really like Snarl, and I am happy that HasTak has finally given him some official love by updating the G1 version of this character. But PotP Snarl is a mediocre figure in every sense of the word. Overall transformation is the same standard scheme that every G1 fan is familiar with, albeit updated with some modern mechanics. He comes with his classic sword, but no blaster. Poseability is sort of there, not great yet not bad. Construction of the figure is adequate. Some parts are a bit too loose in my opinion, but not so horrible that the figure can’t hold any poses on its own. The figure is somewhat playable. You think he would be easy to transform, and that’s true for the most part. But PotP Snarl is one of those figures that, if you haven’t touched it for a while, it will surprise you with transformation impediments here and there. Not because it’s hard, but because there are little mechanical details that you are supposed to remember, but you don’t because you either forgot or didn’t think it’s important.

The one good thing about PotP Snarl is that he looks good in both modes. Here he is in dino mode.

For a retail deluxe class figure, I think the detail on PotP Snarl is more than adequate. You won’t confuse this character with any other.

The 5 Dinobots will combine. I never tried this, but I might if I get bored enough. I have mentioned before that I wish they didn’t, because implementing combination mechanics means putting restrictions on other aspects of the figure, such as the dino modes, robot modes, and sizes of the figures. Grimlock at voyager size is fine, but I do wish the other Dinobots are bigger than deluxe.

If you got the other 4 dinos, then you will get this regardless of what I say. It’s hard to see anyone buying just Snarl and none of the others. But if that happens to be you, then you are indeed an original. Bravo.

Moonracer

HasTak has been releasing many Fembots in recent years. The female Autobots was something completely made up by the G1 show creators in a desperate attempt to win over more girls to the toyline. Whether that worked is anyone’s guess. But what it did do is create demand for toys of the Fembots among the hardcore G1 TF nerds.

HasTak loves you and has started creating toys of the Fembots in CHUG. In January of 2015, Generations Thrilling 30 Arcee and Chromia were introduced. Then PotP Elita-1 was released in March of this year. This month we get Moonracer, one of the original 4 Fembots in the G1 episode “The Search for Alpha Trion”.

First let’s take a look at Moonracer in robot mode. Looking from the front, the figure is not half bad. She’s got a distinctive female body shape, and the head mold resembles her cartoon design fairly well.

But looking at Moonracer from the side, this figure becomes a total fail. Look at that huge backpack. Moonracer has got some serious back junk. Maybe that’s how Powerglide likes it.

Transformation to alt mode is pretty easy and intuitive, so I’m won’t describe it too much. Moonracer is a bit guilty of being a shell-former. Not G1 Scourge bad, but still a shell-former nonetheless. That huge backpack should have clued you in.

The alt mode itself is not badly done. I don’t remember how Moonracer really looked in alt mode, and I’m not going to look it up for the purpose of this post. Power of the Primes Moonracer has a vehicle mode that looks truly Cybertronian, and that works well enough in my book.

So do I recommend Moonracer? If it wasn’t for that giant backpack issue, I would classify this figure as good. But as it stands, Moonracer is still a decent toy. The robot mode is not half bad, as long as you’re only looking at it from the front. Poseability of the figure in this mode is solid. I have no complaints about the alt mode. But if you’re even remotely thinking about buying Moonracer, you are probably a G1 fan that grew up with the cartoons. If that’s the case, you will go buy this figure no matter what I say. Having these characters come to life 30+ years later is a G1ers dream come true. Go buy the figure and fully engage yourself in the TF nerdgasm that is Moonracer.

Trypticon

I first reported on the news of a Trypticon release back in March of 2017. I think in the fall of 2017, Titans Return Trypticon was released. It’s generally agreed that this is a good fig, though reports of hips breaking from the super tight hip ratchets put a damper on things. There are many proposed fixes out there; Google the topic and you’re bound to find some good ones.

With Metroplex and Fortress Maximus, the prices quickly dropped after only a few months of its release. I’m not sure why that is. My theory is that there are only so much demand for such figures. Titans class figures that are clearly G1 inspired would only appeal to the most hardcore G1 enthusiasts, willing to part with hundreds of dollars on a single Transformer figure. The average Transformer fan would take a look in store, stare at the figure in awe, and walk away. Little kids who happened on these figs in the toy aisle would have a hard time convincing their parents to buy such items, and that’s if they even took an interest in the first place.

MSRP for Trypticon is $149.99. Not surprisingly, the fig was going for around that much upon first release. But I was expecting this to follow the pattern of both Metroplex and Fort Max, and have the price reduced soon. I got Metroplex for a bit over $100, and Fort Max for $75. The 2017 Holidays rolled around, and Trypticon was still close to MSRP. I think the lowest I saw at the time was around $120 on Amazon, and after adding in tax it would go over $130. I thought it could go lower so I waited, but then the stock dried up and no more Trypticons would go on sale for a while.

Fast forward to June of 2018, and I saw one third party seller offering this at $103.65. This was a third party seller on Amazon, and not in the same state as me, which means no sales tax. So I quickly jumped on this and got me Trypticon.

I am disappointed to report that, to this day, my Trypticon still sits in the closet, unopened. I don’t know why I’m so hesitant. Maybe it’s because I know of the hip ratchets issue. Maybe I was always more of a fan of Metroplex. Or maybe I’m just too busy, with a 2 year old baby girl in the house.

But I’ll get to this one day. And if you’re reading and think you missed out, don’t. I just checked. Amazon has Trypicon at $109.99, while bbts has it at $99. Value of Trypticon has not gone up at all. Maybe the hip ratchets thing really hurt it. Compare that to Metroplex, which third party sellers on Amazon list at about $650.

Flyfire

I first mentioned Zeta Flyfire back in this post. And in the purchase post for last month (May 2018), I went into Air Strike. So I won’t repeat all that stuff here. Just know that these 2 Zeta Aerialbots are highly similar, definitely cut from the same cloth.

In the pic below, you see that Flyfire uses the exact same kind of packaging as Air Strike. And just like Air Strike, Flyfire comes with the same number and kind of accessories: a rifle, 4 missiles, instructions, and bio-card. Very minimalist, and in my opinion not a bad thing.

Flyfire in bot mode below.

Overall, I would say that Flyfire is about the same as Air Strike in robot mode, but comes together better in jet mode. I mentioned that, for Air Strike, there’s this weird issue with the front landing gear in jet mode. Flyfire has no such issue. It seems like Zeta fixed these minor annoying things this time around. Flyfire is the sophomore release in this series and it shows.

As of this writing, all 5 Zeta Aerialbots are released. My friend Gemini has all 5, and pics of the combined mode into Zeta Superion is impressive. However, Fans Toys have come out with their own set of Aerialbots. I have not yet decided if I want to stick with Zeta, or change direction mid-course and go with Fans Toys. I have a hunch that I will make this decision based on how I feel about Roadking, FT’s version of Motormaster. I received Roadking a few weeks ago, but have not had a chance to open the fig yet.

Bulldozer

By the end of 2015, there already exist several modern interpretations of Constructicons. Two were done by 3rd party: TFC Toys Hercules, and MakeToys Giant. Hasbro also released it’s own update on this popular combiner group. None of these sets are perfect, each with its pros and cons. But all of them can be considered good, and you can make a case for each as to which is the best. Instead of being forced to choose just one and suffer analysis paralysis, I got all 3. And if you were to point a fusion cannon to my head right now and force me to choose the winner among these 3, I probably go with Hercules by TFC Toys.

As if all these options weren’t already enough, in 2017 two more 3rd party companies decided to enter the fray and do their own take on Constructicons. One is Constructor by ToyWorld, which is the next entry (scroll down below). The other is ReBuilder by Generation Toy.

For those that don’t know, NBK is 4th party (read: knock-offs of 3rd party). I have no idea what NBK stands for. In this case, NBK Bulldozer is a knock-off of Generation Toy ReBuilder GT-99D Bulldozer. NBK didn’t even bother giving this figure a new name and just stuck with Bulldozer. And we all know this is supposed to represent Bonecrusher.

So is NBK Bulldozer any good? For a knock-off, it is surprisingly good! It’s packed in alt mode. The box is very minimal, but I will stress again I consider that to be a plus. As for accessories, he comes with a pistol, and the attachment that will become the forearm.

In alt mode, all pieces come together to form a nice cohesive whole.

There is placement for the forearm attachment in alt mode. It can be hooked up to the rear, like a trailer.

The pistol can be folded and tucked underneath the vehicle. See if you can identify where it is in this pic.

I’m guessing Generation Toy took some liberties with the design of Bulldozer, but to me he still seems very G1 for the most part. For color issues, the giant one that immediately pops up is why is the bulldozer blade purple. That’s probably a question that only NBK can answer. Knock-offs are notorious for botching color schemes, and whether or not that’s intentional is anyone’s guess.

Transformation is fun. And I will emphasize that again… FUN! That’s something I feel is often missing from today’s Transformers. 3rd party will often make something that is impressive in how it transforms, but transforming it becomes a chore. And as for HasTak, sometimes the figure is so simple, there is no fun. Sometimes bad construction issues ruin an otherwise well designed piece that would have been fun. NBK Constructor suffers from none of these pitfalls. The superb design is probably more a credit to Generation Toy, but NBK has built a piece that feels more than solid enough to be played with. All joints are at the right tolerance. Things snap together when they need to, and come apart when they should.

The transformation process itself should be familiar enough to anyone who has played with enough G1 style TFs in the modern era. But it’s not super-obvious either, with enough challenge to offer mature fans something to marvel at. Some G1 diehards will complain about transformational design changes, such as the 180 turning at the chest and how the bulldozer blade splits and ends up on the shoulders. I personally feel these are refreshing changes that offer a different yet familiar take on an old and tired scheme.

Below are some pics of the robot mode. I’ll let them do the talking.

Again, G1 diehards will complain about the non-G1-ness. But I like it. Bulldozer is well proportioned in robot mode. He looks different enough from G1 Bonecrusher, but still similar enough to be Bonecrusher. The figure is pretty poseable. And again, I don’t know if the purple bits are by design, this being knock-off and all.

The head mold should satisfy all G1 requirements.

The designers of this mold did account for storage of the arm attachment in robot mode. I guess this is supposed to be a giant backpack thruster kind of thing. It’s kind of hokey, but hey, they tried. Points for effort.

As for the arm attachment in combined mode, the fist flips out from inside the forearm. I like this. I’m not a fan of using extra combining pieces, and GT really minimized this in the design.

Overall I really recommend this toy. Get the Generation Toy version if you don’t mind spending the money. Or get this NBK KO version if you’re on a budget. Speaking of being on a budget, this is the first and only time I got something from ShowZ. I heard about the store, prior to this. At only $9.99 for NBK Bulldozer, I had to try it. That’s $9.99 from China, no extra shipping fees and no taxes! The figure arrived in reasonable time. So if you’re hesitant about the store, don’t be. ShowZ is legit. It’s not one of the China scammers that I have wrote about.

As of this writing, I do have all 6 of the NBK knock-off Constructicons. But I’ll save my thoughts about this NBK set for another day. Because we have something extraordinary to get to. And that is…

Constructor

I saved the best for last. Ladies and gentlemen… I give you… (drum roll)… Constructor!

I will say this right now, so you don’t have to read through all the details: if you want the best Devastator in this modern era, then pick up ToyWorld Constructor. This is hands down the best team in the combined form! If you care nothing for the individual robot or alt modes, then this is the set for you. ToyWorld Devastator is truly worthy of the name, and will put all other Devastators to shame.

But just to be complete, I will show pics of the other modes. Below is each fig in alt mode.

Individually in robot mode.

And now the pics you have been waiting for… the combined mode! Behold the awesomeness that is ToyWorld Constructor.

I spent $469.99 buying this set, and in this form, he’s worth every penny. Constructor is at the size he needs to be to properly scale with MPs. ToyWorld really hit it out of the park with this awesome set.

Doing a full review here won’t pay enough homage to group, so I intend to do a separate review later. So I will quickly list some pros and cons in bullet points.

Pros:

  • Awesome Devastator! (I can’t say that enough)
  • Solid build and construction
  • Nice individual robot and alt modes
  • G1 accurate – TW took very little liberties in the design
  • Fun transformation that’s intuitive and not frustrating

Cons:

  • Uses combining parts – and many of the parts have nowhere to go when in individual mode
  • Individual modes do not scale well in MP – way too big

The bullets in Cons are points you kinda would expect, for Constructor to be so good. Unless someone really figures out show to mass shift, either the combined mode would be too small, or the individual bots would be too big. TW took the latter approach, but that’s to give us a Devastator that is truly representative of what we see in G1. As for using combined parts, I will concur with the naysayers and agree that it’s kinda cheating. Especially when the parts have nowhere else to go in the individual modes. But the proportions of Constructor is so good, I’m almost willing to forgive this. Almost. How you feel about using combiner parts is up to you, but I still see it as a negative.

When this set was first released, each bot had to be purchased separately, costing about $100 each. TW has gone away from that and now only release the complete set as one. The edition that I have here is the regular edition. It’s a very minimal set that only comes with the essentials. I don’t even remember if I have the Devastator gun, I’ll have to check. Other editions come with extra heads and different color thigh parts. TW knew they had a winner here, and kinda went crazy and released all sorts of different versions of Constructor. There’s a yellow one, an orange one, a clear green one, a clear orange one, a limited edition metallic one, and some more that I don’t remember. As of this writing, this regular edition that I feature here is on longer available. But there is a limited ultimate edition that costs about $500. I’m not sure what’s exactly in this ultimate version, but I see that it has more realistic paint. Some minor tweaks to the molds were made, probably after getting fan criticism on certain issues. It might come with all the extras. For only $30 more on top of what I paid, I wish I waited for this version. Oh well. Am I hardcore enough to get this version too? Most likely not. Probably not. I hope not.

And another quick FYI… sometimes the other color sets may go for crazy cheap. I think I have seen the clear orange one go for $299. It might have been ShowZ. Or maybe one of the other dealers on a weekend sale.

Whew… that was a WAY longer post than I had intended. Sometimes when the writing mood hits me, I don’t stop. This may have been my longest post ever. Longer post equals more proof reading, something I hate doing. It takes time away from playing with the awesome figs featured here.

Transform and Roll Out.

 

Categories: On The Hunt, Pics

Titan Class Devastator – Combiner Wars

February 17th, 2015 Comments off

Quick follow up to my last post. There are now official pics to Titan Class Devastator. I am way more interested in this than I was before!

Constructicons… Transform and Roll Out!

Categories: Pics, TF News

Titan Class Devastator

February 9th, 2015 Comments off

OMG! I did not see this coming from Hasbro! After two modern updates of Devastator by third party companies, Hasbro is finally releasing their own. Check out this pic below, from what I think is a toy fair in Germany.

Supposedly each individual fig is gonna be Voyager size, and the Devastator combined will be Titan class! That’s Metroplex size! Though early rumors seem to indicate that the engineering will be quite basic. I speculate Hasbro has finally decided to do something about 3rd Parties making money off their property.

I’m debating if I want more Constructicons in my collection. After wonderful interpretations by both TFC Toys and MakeToys, I’m not sure I need another Devastator. Knowing me, I will get this if the price is right.

Prepare for Extermination! Transform and Roll Out!

Categories: Pics, TF News

TFC Toys Hercules

April 8th, 2012 5 comments

As the first combiner team in the TF Universe, the Constructicons are the most recognizable gestalt group among hardcore TransFans. Many combiner teams have come since their appearance, but no other unit has had the legacy that is claimed by this platoon of six Decepticon construction vehicles. They made their first appearance in 1984 in the G1 episode “Heavy Metal War”, one of my favorite G1 eps of all time. The six evil builders sneaked into the Ark for some mischief, not expecting to be overpowered individually by the Dinobots. And just when it looked like the Dinos were gonna turn them to slag, the Constructicons combined to form the fearsome Devastator!

Since the introduction of Classic figures in 2006, hardcore G1-ers such as myself have been crying for an update of the Constructicons that would fit well into the Classic-verse. We all knew that the chance of it really happening was small. Hasbro has not made a true combiner team since god knows when. Their recent approach to gestalts, such as the ROTF Constructicons and PCCs, are nothing short of disappointing. A true combiner team in the G1 spirit does indeed feel like a heavy undertaking, something Hasbro was not prepared to invest in.

Enter TFC Toys, a third party in the same vein as FansProject or iGear. I don’t have any background information on this company. But they were willing to give us what Hasbro will not. Similar to the 2010 FansProject homage to Combaticons, TFC Toys is giving us “Hercules”, a team of six constructions vehicles that can each transform into a robot and combine to form the giant Hercules. Since TFC Toys is not affiliated with Hasbro in any shape or form, they cannot use official Hasbro names to the characters. But it’s obvious that this team of 6 is an homage to the original Constructicons.

This set is not cheap. Each figure is about $100. I’ll let you do the math for how much it cost for the entire set. Clearly this is for hardcore collectors only. Each figure is about Voyager size. I bought the first one back in Oct of 2011, and I completed the set in Feb of this year. Each is packaged in robot mode. A group shot of them individually appears below.

Top row (left to right): Exgraver (Scavenger), Heavy Labor (Long Haul), Neckbreaker (Bonecrusher).
Bottom row (left to right): Madblender (Mixmaster), Dr. Crank (Hook), Structor (Scrapper).

And here is a group shot of them individually in their alt modes.

Each figure in the set is well constructed and feels solid and robust. From a pure aesthetics perspective, these figures draw heavy influences from G1 and the Classic-verse (no weird Movie designs here). Transformation for each figure is also not difficult, and should be obvious to anyone who has played with enough G1 or CHUG toys. I won’t go too much into each figure individually. Just know that I am impressed with each of the 6.

I should point out however that there are 2 constructions issues. The first one has to do with Heavy Labor’s hip joints. TFC was willing to acknowledge the issue and has included a replacement part with Neckbreaker. This post goes into the fix in good detail. The other issue has to do with Neckbreaker itself. It’s a pretty easy fix that I did in about 5 min. Check out this post for the fix. I realize that at $100 a piece, they should be issue-free. However this is TFC Toy’s first attempt, and they were responsible enough to provide fixes, so I don’t see it as a big deal.

Ok, now onto the real reason I bought this set, the giant Hercules. This figure is awesome when combined! Check it out!

Hercules is such a towering giant of a robot that you can’t help but be impressed when the figure is witnessed in person. Transformation of each of the individual components is not difficult, but putting them together to form Hercules does require some work. The joints that connect each component is super tight! I really had to apply force to get the pieces to combine. That’s probably a good thing, considering that each figure is Voyager size, so the tight connection will help Hercules stay combined.

Neckbreaker also comes with a visor that you can put over the eyes of the head of Hercules. This is so you can decide between how you want Hercules to look, either more like the G1 toy (no visor) or more like the G1 show (with visor). The picture above is the only one here where I did not put on the visor. Personally I like how he looks in the G1 cartoons, so the visor is included in all shots below.

One thing that I really like about this set is the fact that extraneous pieces are not required for combining. With the G1 toys, merging into the mighty Devastator required a extra head piece, a extra chest piece, a extra hip piece, 2 extra forearms, and 2 extra fists. Many of these pieces had no where to go when the Constructicons are separated, in either or both alt and robot modes. Combining the toys were impossible without the head and hip piece. The Hercules set has no such issues. Extraneous pieces are not required for combination. Almost everything needed is built into the figures. Take Hercules’ head for example. It is built into Dr. Crank’s back. All connectors are also built into each component. The only pieces that can be argued as add-ons are the fists and chest shield. However, there are places to store these in both individual alt and robot modes, so they are accounted for. Even the guns used by individual figures are accounted for when combined (more on this later). I give TFC Toys high praise for engineering a combination mechanism where add-on pieces are very minimally used.

Below are some size comparisons pics. See for yourself what a massive figure Hercules really is.

For a gestalt, Hercules is quite poseable. There are pivot points at the neck, shoulder, elbows, fists, fingers, hips, and feet. The only key places absent of articulation are the knees. The gestalts made by Hasbro are not articulated at all, so I feel TFC Toys has given us more than enough.

One last thing that I wanted to show is the giant rifle used by Hercules. Take a careful look at the picture below. The rifle is formed by taking the six pistols used by each figure and combining them. Very very cool. I did not know of this until I bought the set. TFC Toys really put a lot of thought into the design of Hercules.

To summarize, I cannot say enough good things about Hercules. I give this set the highest possible recommendation. Yes I know the price is gonna be a turnoff for many, but it is so worth it. As of this writing, BBTS has a sale on third party figures, which may alleviate some of the financial burden of owning something so awesome. If you like combining transforming robots, you owe it to yourself to acquire this in your collection.

With Hercules, TFC Toys has established themselves as a solid 3rd party in the Transformers Universe. I look forward to what they will produce next… Transform and Roll Out!

Categories: Pics, Toy Reviews

My KO Constructicons

July 8th, 2011 5 comments

Once again I’m back home. In anticipation of the upcoming Encore reissue Constructicons, I decided to dig out my knock off Constructicons from back in the mid 80s. These are supposed to be knock offs of the original Diaclone toys, that’s why they’re red and yellow.

In alt form they’re in pretty good shape. I didn’t put the accessories on any of these since I think they look better without them.

In robot mode they began to show their age. Left arm on Mixmaster is broken so I left it at the side. Right leg on Hook is broken at the knee, though you can’t tell from the pic. They show some sticker wear but overall not too bad, unlike my G1 Combaticons where all the stickers are in bad shape. My favorite of these is Bonecrusher. I like his transformation the best. I got all the little guns that each of them have, but after 25+ years I can’t remember which gun goes to who so I didn’t bother.

Combined as the fearsome Devastator. They still hold up pretty well after all this time. Granted, it wasn’t that good to begin with since it’s KO, but after 25+ years this set feels about the same connection wise. Some attachments actually felt tighter than I remembered. KO Devastator is all colorful, kinda like movie Devastator.

Below is KO Devastator next to a genuine Diaclone Slag.

As a kid I treasured this set even though I knew they were KO. Nowadays I keep these around for a good laugh.

Transform and Roll Out!

Categories: Pics

Top 10 Transfomers with No Mouths

November 3rd, 2009 Comments off

The other day I happened upon an image of movie Optimus Prime, and seeing him with lips just don’t do it for me. That G1 mouthpiece is just too iconic, and seeing movie Prime yap his trap is just silly.

This got me to thinking, what do Transformers need mouths for anyway? Like all machines, they have infinite ways to communicate that humans can only dream of. If they feel the need to “talk”, or if audio transmission is only to communicate with humans, they can easily do it through other standard audio channels. They don’t need to eat. Ingest Energon maybe, but I’m sure they have other means to do so. A mouth for a Transformer simply serves no purpose, but it seems like most TFs have them.

But some clearly do not. So I got to thinking, what are my top favorite TFs that have no mouths? This includes TFs that either use a mouthpiece or is missing a mouth altogether. Below I humbly present my top 10 favorite Transformers that let their actions do their talking for them, instead of their pie holes.

10. Sixshot
Sixshot is unique in the TF universe for being the first TF with 6 modes (I think the only other one is Quickswitch). Truly a one-robot army, he came way too late in the US G1 cartoons to fully make an impact. In the Japanese continuation, however, he has a much bigger role. Sixshot lets all his transformations do the talking for him. It should be noted that his wolf mode does have a mouth, but that’s probably just there to bite all his enemies to shreds. I think my cousin had this toy when we were kids. I believe he was re-issued this decade in Japan, I should hunt one down. Better yet, I like to see a Classic update of this character. To accommodate 6 modes, he’s gotta be Voyager class or bigger. With the toy technology they have today, he would be so awesome. Oh man I’m getting excited just thinking about it.

9. Getaway
I have always loved the Powermasters. The idea that a Nebulan partner transforms into the engine, which then unlocks the Transforming mechanism of the TF, is… well… pretty stupid actually. If I was a TF, and I needed a partner to unlock what I could’ve done any time I pleased, I might as well shoot myself. However, the toys themselves were cool. Getaway made this list mainly because I had his toy as a kid (and I still do, complete, intact, and in good shape with tight joints), and I’m always partial to TFs that I own. But more importantly, the G1 Powermaster figures all had pretty good molds, with cool designs and robust construction. Getaway in my opinion was the best of the Autobot car Powermasters. His alt mode is supposedly a Mazda RX-7, and the robot mode looks nicely balanced. His profile is also unique for being the masterful escape artist, something not shared by any other TF to my knowledge. In the Movie line of toys, he appeared as Breakaway (repaint of Cybertron Excellion), a Walmart exclusive. Getaway did not appear at all in the US G1 cartoons. However, he appeared many times in the US Marvel Comics continuity, and has a significant role in Vol 3 of the War Within series (which is unfortunately unfinished).

8. Bombshell
I have always too loved the Insecticons. Transforming into insects is just too freakin’ cool. I also went into why Bombshell is special for me in a previous post. Bombshell is the only Insecticon without a mouth. Though all Insecticons feed like crazy so I guess they put the mouths in their bug modes to good use. Bombshell has the special ability to mind control his targets with cerebral shells. All 3 Insecticons (and maybe even the deluxe guys from G1) would be good to re-do in the Classic line. There shouldn’t be any licensing issues whatsoever, and with insects the toy designers should be able to get very creative.

7. Scrapper
The Constructicons are one of my favorite sub-groups of all time in the TF universe. They were the first Combiner group introduced, and Devastator gave the Autobots all they can handle. Not only powerful, the Constructicons are also master builders and engineers. It’s hard to say who is the most famous Constructicon, but Scrapper definitely deserves consideration. As the Constructicon leader, he’s always supervising the Decepticon’s latest construction project, whether it be a new weapon, space cruiser, command outpost, or whatever. He seems to take an evil delight in all his creative pursuits, and I love the way he orders the team to unite when the Autobots are about to kick their butt.

6. Wheeljack
The resident “mad scientist” of the Autobots, Wheeljack is always working on something when he’s not too busy helping Ratchet repairing their wounded comrades. Wheeljack is famous for being the first TF we see on screen in the G1 cartoons and for creating the Dinobots. He does not have a mouth at all. When he speaks, the two pieces to the sides of his head lights up, indicating he has communicated. This is actually how I anticipate TFs to talk. Rumor has it that Wheeljack is getting an update in the next wave of Classic figures, something I highly anticipate.

5. Bruticus
Of all the Combiner teams, the Combaticons are my favorite. I remember back in grade school, my classmates and I would argue over which is the best Combiner team. Many voted for the Stunticons, some liked the Aerialbots. They were both good choices, but my vote goes to the Combaticons. Let me explain why. For the Stunticons and Aerialbots, the figures that form the limbs are not at all diverse. All the Aerialbot jets transform the same way, and so does the Stunticon cars (though to a lesser degree). Once you bought one, it’s like you bought them all. The Construction toys were old and outdated by the time the newer Combiners rolled around. And the Protectobots, well, they were a bunch of wussies in the cartoon so I don’t think anyone liked them. Not counting the later seasons, this only leaves the Combaticons. They were powerful in the cartoon, many times beating the other combiner teams. And as for the toy, each limb component were truly unique from each other, in both transformation and alt mode. And they all transform into combat vehicles! I don’t think it’s any surprise that Hasbro re-released this figure set 6 times after G1! That in itself should prove this is the most popular combiner set. My first Combaticon was Blastoff, and I slowly collected the rest as time went. Finding Vortex back then was a real challenge, I think he’s the rarest one out of the five. I still have my G1 set, all complete, the pride and joy of my G1 collection (though Onslaught is getting quite loose). I think all the Decepticon combined forms has the same personality (strong and dumb), but Bruticus comes from my favorite team so I had to put him on here. And when I was compiling this list, it dawned on me that all the Combaticons except for Swindle have mouthpieces, but for the sake of variety I just let Bruticus represent all of them.

4. Shockwave
If I was re-born as a Transformer, this is how I want to look like, because no one would know what I was thinking or feeling. Nevermind not having a mouth, Shockwave is completely devoid of all facial features, except for his iconic cyclops eye. When he talks, the eye starts flashing in sync with his words. So is he talking through his eye? Does the round object on his face function as both eye and mouth? We may never know, but that quality of being extremely efficient matches well with Shockwave’s personality. In the G1 cartoons he is simply the guy waiting on Cybertron (for 4 million years!), but in the comics he is given a much bigger role, often taking command of the Decepticons and conducting unorthodox experiments, such as Triple Changing and Combining technology.

3. Grimlock
“Me Grimlock not kisser, me Grimlock no need mouth!” The bad-ass that is Grimlock represents some of the very best that the Autobots have to offer. Grimlock is one of the Autobot’s most powerful warriors regardless of which TF continuity you follow, but in the US Marvel Comics continuity (and extended in the comic prequel War Within), we see that he is also a very capable leader, even taking on role as Autobot Leader form time to time when Optimus is missing or deactivated. In the cartoons, and especially in the G1 movie, he is often portrayed as the comedy relief despite being very powerful. However, no one forgets that he was the first TF character to have a T-Rex as an alt mode, and that in itself is just too damn cool. Grimlock seems to enjoy his Dino mode a lot more so than his robot mode (in the cartoon anyway), perhaps because as a T-Rex, he’s got a much bigger mouth to chomp his enemies into itty bitty pieces.

2. Soundwave
Ask any true TF fan to name his top 5 favorite Decepticons, and Soundwave is bound to be on that list. The Decepticon communications officer earned his place in TF legend not by being the most powerful warrior, but through his exploits in stealth and cunning, his monotone way of speaking, his non-personality, and last but not least, his numerous henchmen that he can eject as cassettes from his tape deck. As far as G1 toys go, Soundwave is perhaps the most accurate to the G1 cartoon. Let’s face it, the cartoons made most characters look much better than their toy representations (I’m looking at you, Ratchet and Ironhide). Soundwave is the lone exception. If you looked at him in the cartoons and imagine in your mind how his toy would look, well, that’ how it looks. His G1 mold still holds up well today. In fact it’s so good that I don’t think a Masterpiece version can really improve on it, other than making him bigger and perhaps a little more detail.

1. Optimus Prime
Like I would put anyone other than Optimus Prime in the top spot. Optimus Prime is perhaps the most iconic Transfomer of all time. His dedication to the freedom and welfare of all living beings is unrivaled. Optimus has got it all, being both a powerful warrior and capable commander. He (along with Megatron) has appeared in every Transformer continuity and spin-off. The earlier renditions of Optimus all has him appear with the mouthpiece, but later versions of the character tend to give him the lips with the mouthpiece serving as some kind of lower face shield when he’s in battle (such as Beast Wars, the Michael Bay movies, and the Animated Series). I don’t know what is the reason for this evolution, but the G1 purist in me will probably never get used to seeing Prime with moving lips. And I think not seeing the lips gives a character more authority in appearance. This is the design I prefer for Prime. There are many Optimus figures where you can pose him with the mouth shield on or off. Guess how I pose mine?

Honorable Mentions: Warpath, Powerglide, Hoist, Seaspray, Cosmos

Until next time… Transform and Roll Out!

Categories: Top Ten