June of 2015 is Robots in Disguise month! Check out all the RiD figs below. There are some third party items here too.

• Robots in Disguise Optimus Prime, Walmart, $14.97

• Robots in Disguise Drift, amazon.com, $12.80

• Robots in Disguise Jazz, Target, $14.99

• Perfect Effect Perfect Combiner PC-02 Upgrade Set, tfsource.com, $32.99

• Before & After Alpha Launcher for MP-18 Bluestreak, tfsource.com, $14.95

• ToyWorld Grimshell (Corelock), tfsource.com, $149.95

Before this month, I only bought one RiD figure. That was Grimlock from back in January. I was not terribly impressed with RiD Grimlock. So you might be wondering why I bought all these RiD figs here. Truth be told, I only bought them because there wasn’t a whole lot of other TFs on the shelves. Combiner Wars was in a slight retail pause, and my 3rd party orders haven’t come in yet. But I’m glad I got the RiD figs here. Drift is a great one. If you can only get one RiD fig here, get Drift. Both modes are good, transformation is fun, and build construction of the toy is solid. I love his twin swords. Jazz is a nice one too. I don’t know if I’m feeling that spear/gun weapon, but the figure itself is a worthy addition to Jazz. The Optimus Prime figure is not great, but not bad. There’s some fun stuff going on here, but overall he’s too simple and too small. It’s kind of the same gripes that I have for Grimlock. Though Grimlock is getting (or has gotten) a bigger, beefier version for the collectors. I hope OP gets the same treatment.

Now onto those 3rd party accessories. Perfect Combiner PC-02 Upgrade Set is meant to enhance Combiner Wars Menasor. I got some picks from back in this post. Most fans seem to be gushing over these sets, which is why I got them. I don’t know. I think they’re ok, but in my opinion they don’t add that much to the combined form. Maybe I’m expecting too much. Alpha Launcher for MP-18 Bluestreak by Before & After is an excellent upgrade! I got one pic below that shows it off. I like how the MP toy designers incorporated launchers as part of the transformation. But they are more reflective of Bluestreak’s cartoon look, and they look a tad small. With these Alpha Launchers, Bluestreak now has the firepower to be the true gunner that he’s meant to be. This upgrade set also comes with decals for the MP that are much like the decals of the original G1 toy. I did’t put them on. But know that it’s an option for those that like their figures all decked out with decals.

I have written about ToyWorld Grimlock several times already. He’s officially listed as Grimshell on the box, but sometimes he is listed as Corelock on store sites. Anyway, I have raved on and on about this figure here and here. So I won’t repeat my G1 fanboy praises yet again. Just go read those.

Below is a group photo of the bunch (minus the upgrade set for Menasor).

Transform and Roll Out.

Behold my fellow TransFans… ToyWorld Dinobots!!! This set looks so good together, I had to make a post on this topic alone. Focus your optics on the pic below.

For those that don’t know, this set of Dinobots is made by 3rd party ToyWorld. Obviously they have to use their own names for the characters since they have no rights to any Hasbro properties. None of them come with any Autobot symbols for the same reason. I bought some TF faction stickers last year, and I applied one to each figure with the exception of Grimlock. The faction stickers are applied to the area that would become the chest in robot mode, so you don’t really see them in this pic (except for Slag, if you look carefully). Here is the name mapping for each character to figure:

• Grimlock – Grimshell (or Corelock)
• Slag – Iron Dreg
• Sludge – Muddy
• Snarl – Roar

I assembled this set together when I received Sludge last week. I actually bought Sludge months ago, back in March. TF Source had a weekend sale so I was able to snag Sludge at $80. But I had nothing else to ship with Sludge, til now. Slag I received about a month ago. Much like Sludge, BBTS had a daily sale on Slag for a tad over $90, and so I snagged him quick. I already kind of went into Grimlock and Snarl. And so here’s the four of them together. I know what you’re thinking… where’s Swoop?! Don’t worry TransFans, I will get him. I’ll take a another pic with the full force when I do.

From a transformation perspective, I like Sludge the best. His transformation is fun and intuitive, and at the same time complex enough to satisfy the mature TransFan without being overly complicated or frustrating. Snarl is good too, but I don’t like how his tail keeps coming off during transformation. It makes me feel like he’s puzzle forming. It is possible to have it stay on, but you would have to be super delicate. Slag is a little too simple transformation wise when going from Dino to Robot. Going back, there is something that’s kinda frustrating with the legs, to have it positioned exactly so it would align with the back. Grimlock has a cool transformation, but in my opinion his T-Rex mode is so much better than the robot mode, so most of the time I just don’t bother. Don’t get me wrong, I think his robot mode is solid. But the T-Rex kicks ass!

I might also take a pic of them all in robot mode. And maybe even the combined mode after I get Swoop! But that’s for another post.

Me Grimlock say… Dinobots kick butt!

Me Grimlock say too… Transform and Roll Out!

April of 2015 continues with more Combiner Wars and 2 third party figs.

• Combiner Wars Breakdown, hasbrotoyshop.com, $14.81

• Combiner Wars Dead End, hasbrotoyshop.com, $14.81

• Combiner Wars Offroad, hasbrotoyshop.com, $14.81

• Combiner Wars Air Raid, hasbrotoyshop.com, $14.81

• Combiner Wars Blackjack, Target, $9.49

• Combiner Wars Megatron and Armada Megatron, tfsource.com, $89.99

• Mastermind Creations Felisaber, tfsource.com, $75.95

• ToyWorld Roar, gift

The 4 deluxe figures are all from Combiner Wars Wave 2. They are not that different from the Wave 1 figures in the way they are constructed. Individually, I definitely like the CW Stunticons better than the CW Aeiralbots, because there is more variety for the limb figures. Air Raid is cut from the same cloth as Skydive and Firefly. Breakdown and Dead End are different enough from Dragstrip and from each other that it doesn’t feel like buying the same figures over and over. Hasbro came up with another figure called Offroad for the Stunticons, just like they did Alpha Bravo for the Aerialbots. Wildrider would be released later, so there is no reason to buy Offroad just to complete Menasor.

Blackjack is a fun little figure. I like his transformation from car to robot. Both modes look good. He’s not bad for a figure of this size. In combined form, he is meant to attach onto Menasor’s chest like a shield. I mentioned before in another post that he doesn’t connect that well in this form. This can be fixed, however. I will mention this again when I go into the 2nd Motormaster that will come out later (with fixed hips). But even the 2nd Motormaster has the peg problems for attaching Blackjack, so it will require this fix. Sometimes I feel Hasbro really should test these things before they put the figures on the shelves.

Next up are the 2 Megatrons. I love these Megatrons! The G1 version of the figure is especially sweet for a G1 purist such as myself. This is probably the best G1 inspired Megatron that Hasbro has made in quite some time. In robot mode, this is unmistakably Megatron. The head mold, body stylings, and colors are pure G1. Transformation to tank mode is actually fairly simple for a figure of this size, but there is enough to do here that should satisfy even the most hardcore of TransFans. Tank mode is superb as well. Construction of this figure is super solid. This Megatron will easily withstand some rough play. The Armada version of this figure is exactly the same mold-wise, but has different colors and a different had mold.

Next up is MMC Felisaber. I already went into Felisaber back in this post, so I won’t go into detail again here. Felisaber is meant to be Catilla. Catilla has the privilege of being among the first TFs to be named in a Before Carly post on this blog, so check it out.

Finally, there is Roar, TW’s homage to Snarl. I mentioned Roar here, so read that post for more info of Roar’s awesomeness. Roar was a gift from my wife (my fiancee at the time). I put a bunch of figures on my wishlist at TFSource, and she picked Roar. She has good taste!

I will be out of the country for the next 2 weeks, so I won’t be posting. I will be in Asia. Hopefully I will find some good TFs on the trip! Transform and Roll Out!

Much like this previous post from about a year ago, today let’s take a look at some CHUG Autobots from G1 Season 3.

CHUG is an acronym for Classics Henkei Universe Generations. These are all terms that Hasbro or Takara has used to label various Transformers lines that represent a modern update of classic G1 characters. I have also seen some fans refer to them collectively as G3, since it follows G1 and G2. Whatever you call it, they are all modern toy interpretation of Generation 1, though not necessarily in their exact G1 forms.

All characters below are regulars in G1 Season 3. Though they may have had their origins well before that.

I chose these 5, mostly because I have them handy. Let’s look at each of them in detail, in the order of release.

Rodimus, Reveal the Shield, 2011
If you are talking about G1 Season 3, you must include Rodimus. He is the leader of the Autobots for most of the season. Sure, he never lived up to Optimus Prime, but those are big shoes to fill for anyone. Originally in 1986, his name was Hot Rod. And he would become Rodimus Prime after receiving the Autobot Matrix of Leadership. For licensing reasons, Hasbro could not use the name Hot Rod nowadays. So now the Hot Rod incarnation of this character goes simply by Rodimus. The first version of this particular figure came out all the way back in 2006. That Rodimus was one of only 6 figures first released for the Classics line. I have that figure too, but he’s stuck in a box somewhere in the back of the closet. So I am using this Reveal the Shield version instead, only because he was easier to get to. This figure was released in 2011 as part of a 2-pack with Cyclonus. He’s more cartoon color accurate than the initial version, though I’m not sure that’s a good thing here. This figure still holds up well today. The alt mode is nice and sleek while being G1 accurate, and the robot mode is robust with nice poseability. Transformation is also well engineered. In my opinion, this is still the definitive CHUG Rodimus even 10 years later. But he might be due for another upgrade soon. We’ll see what Hasbro does.

Springer, Generations Thrilling 30, 2013
I know I have written about this Springer back in this post. If you read that post, I mention that I was so excited to open this fig that I didn’t even stop to take pics of it in the box. This Springer is one of the best figs that Hasbro has ever produced! That’s a strong statement coming from me. I have limited space for displaying figs. So usually what happens is I display a new figure for a while, then it goes into some storage somewhere. I acquired this Springer back in May of 2013. And almost 3 years later today, I have continuously displayed this on some shelf, never going back into a box! That should tell you how much I like this fig. This figure is hands down the best triple changer that Hasbro has ever made. All 3 modes look good. Transformation is complex enough to satisfy the true fan, while being not overly complex to reduce any fun factor. As of this writing, he’s still very affordable on Amazon. So get one if you don’t have one yet. This mold was later re-worked slightly to be Sandstorm. That fig is good too.

Arcee, Generations Thrilling 30, 2014
This Arcee figure was mentioned in the very last post. I acquired the fig in 2015, but I believe her release was in 2014. Regardless, she is the definitive CHUG Arcee. Mostly because this is the only CHUG Arcee released. As the most famous female Autobot in the history of TF, you would think Hasbro would want to do this figure well before 2015. But better late than never. This Arcee figure is a worthy rendition of the character. I like the alt mode. It well represents the sporty future/Cybertronian car that she transforms into in G1. In robot mode she’s got some back kibble. And transformation wise, she’s a bit of a shell-former. But I can overlook it because I do understand the challenges of making Arcee. Most other TF characters that appear in G1 are toy-first, meaning the designs are based on an existing toy. Arcee is the opposite of that. She was created for the 1986 G1 Movie, and toy makers are now doing a figure based on that design. Overall I am happy with this figure. Not perfect, but pretty solid.

Corelock (aka Grimlock), ToyWorld, 2015
Dinobots are forever favorites among the G1 fandom. By the time Season 3 rolled around, all 5 Dinobots are still kicking butt and taking names. But the only one that made regular appearances in the season is Grimlock. In Season 3, he talks more then ever before, in his classic Grimlock speech. And much like when I made the post for Season 1 Autobots, I am using the ToyWorld version of Grimlock. As a 3rd party, ToyWorld cannot officially call him Grimlock. So he is listed as Corelock (and sometimes Grimshell). Of all the Grimlock toys that I own, this one is hands down my favorite (and I own a lot). In T-Rex mode and robot mode, Corelock captures the G1 look down to the last detail. Transformation follows the tried and true G1 formula for Grimlock, but there are enough engineering differences here to make this figure feel modern. Construction is solid and robust. He is the perfect size for CHUG too. Hasbro has made some CHUG dinos, but scale wise they feel too small. Corelock displays well next to other CHUG Autobots, as you can see in the pics. Large enough to be CHUG, but not so large as the 3rd Party MP dinos. (A sidebar: the FansToys MP style G1 Dinos are awesome figures, which I must write about in a future post.) He can also combine with the other ToyWorld Dinos to form a giant robot. G1 Dinos never did this, so I won’t go into this too much. I know what you’re thinking: how does he compare with MP Grimlock? That is a very tough comparison. I really like that figure too. But I feel Corelock edge him out just a little as the better Dino, only because Corelock is more playable than MP Grimlock. Overall, Corelock gets my highest recommendation. If you need a Grimlock in your CHUG lineup, look no further.

Ultra Magnus, Combiner Wars, 2015
Last but not least, there is Ultra Magnus. I love Ultra Magnus. He never got enough credit as a member in the Autobot leadership hierarchy. Always the 2nd in command, but consistently available to make leadership decisions and fight in tough battles when the Primes are not around. Sure, no one was gonna take the place of Optimus (and rightfully so), but he should have got his chance instead of Rodimus (like Optimus instructed). As a toy, this character never got much love until perhaps the late 2000s. Before that, he was ALWAYS a repaint of the Optimus Prime toy. G1 was nice enough to give him a different trailer at least, so in robot mode he appears completely different. These days, UM always rightfully get his own figure (including a nice MP figure). This Combiner Wars figure is the first full-fledged Ultra Magnus that we get in the CHUG line that is NOT a repaint of Optimus Prime. And boy did they do a good job here. Personally, this is my favorite UM figure of all time, surpassing even the MP. He is Leader class size, like he should be. He looks great in robot mode. One of my complaints about the MP UM fig is that he’s too blocky. CW UM does not have that problem. He appears exactly like he does in the show. In truck mode he looks great too. Some might complain that the cab is a bit small, but if that scales right, UM would be way too big in robot mode. Transformation follows the standard UM formula, but in this case it’s not a bad thing. The cab and trailer is integrated into one when he transforms. He also comes with a Mini-Con, which I don’t really care for. As for this writing, he is lower than MSRP on Amazon. He is released as part of the Combiner Wars lineup, but he doesn’t really combine with anything. Gets your now if you don’t have one already. No true TransFan can live without this UM in their collection.

Below is a pic of the figs in alt mode.

Season 3 Autobots… Transform and Roll Out!

OK, I am now finally getting back to documenting my monthly purchases. I swear to Primus I will finish this and catch up to where I am currently. Might take many posts, but it shall be done!

• Robots in Disguise Grimlock, Toys R Us, $16.99

• Generations Thrilling 30 Arcee and Chromia, tfsource.com, $31.99

• Combiner Wars Optimus Prime, amazon.com, $24.99

• Combiner Wars Silverbolt, amazon.com, $24.99

• Combiner Wars Thundercracker, amazon.com, $10.99

• Combiner Wars Powerglide, amazon.com, $10.99

• Combiner Wars Windcharger, amazon.com, $10.99

• Combiner Wars Bombshell, amazon.com, $10.99

• Toyworld TW-H04 Infinitor, tfsource.com, $114.95

• Microblaze Creations MBC002 Military Titans, tfsource.com, $109.95

• Masterpiece Ultra Magnus, hlj.com, $122.77

• Masterpiece Bumble, hlj.com, $44.26.

Here are the stats breakdown for the month:

• 1 fig from Robots in Disguise
• 2 figs from Generations Thrilling 30
• 6 figs from Combiner Wars
• 2 Masterpiece figs
• 2 Third Party figs

First up is RiD Grimlock. I think this was my first figure from the Robots in Disguise line. RiD figures as a whole seems cheap and simplistic. But this is Grimlock, so I gave it a shot. I dunno… he’s not bad, but not great either. Fun to play with for a while, but very forgettable once the fig is put away. I don’t think too highly of the RiD line, and this figure doesn’t do anything to change that perception.

Arcee and Chromia are the last of the Generations Thrilling 30 figs that I would buy. I still don’t know where this Thrilling 30 tag comes from… I am guessing maybe it’s the 30th anniversary of TF. Whatever the reason, I have enjoyed figs from this line. Arcee was one that I waited for. We finally get a good CHUG representation of everybody’s favorite female Autobot in her G1 stylings. Alt mode for Arcee looks awesome. Robot mode wise, she’s got some kibble on the back, but nothing I can’t live with. Transformation wise she’s a bit of a shell-former, which again deals with the back kibble. But I think I’m just so happy to get an official CHUG Arcee that I’m willing to overlook these minor shortcomings. Chromia is an excellent figure. I believe Chromia is a minor remold of Transformers Prime Arcee. In robot mode they look very similar, but Hasbro did enough modifications to the alt mode to make Chromia feel like a brand new figure. She looks like those bikes out of Tron. Very very cool! I actually enjoyed playing Chromia more so than Arcee. But I am glad I have both TF fembots in my collection.

OK – Now on to Combiner Wars! This is a series that I have looked forward to for some time. Combiner Wars officially kicked off in January of 2015. CW is a G1-inspired subline in the TF Generations line of figures. The gimmick here is that one voyager sized figure and 4 deluxe sized figures can combine to form a giant robot. Much like the combiners from G1, the toy limb components can be mixed with any bodies in any combination (like Scramble City). Third parties have been doing combiners for quite some time now. So I guess it’s about time Hasbro got on this trend and make some money off their own properties, instead of letting third parties hog all the action.

I wasn’t able to find any deluxe sized figs this month, but I was able to get 2 voyager figs and 4 legends figs in CW. These won’t combine obviously, but I like all these characters so I bought them all.

To start things off, we get CW Optimus Prime. Yes friends, they made OP into a combiner. Not technically G1-esque, but whatever. They are also using this mold as Motormaster (which I will go into in future posts), so this is more of a way for me to check out the mold. The robot mode is kinda blocky. Truck mode is not bad. I’m personally not too impressed with this mold in combiner body form. There is a problem with the hips of the figure. But between robot and truck modes, the construction is solid and robust. So for me, the CW OP fig is just ok.

Next in the line is CW Silverbolt. The famous G1 Aerialbot leader is finally getting a modern upgrade! Yeah, there was an Ultra Class figure released around 2008 (and later repainted into Skyfall). But that figure did not combine, so he was never a true Silverbolt in my opinion. The CW Silverbolt is a G1 homage through and through. In both jet and robot modes, he looks accurate to his G1 self. Transformation may be a tad simple for mature collector, but is still leaps and bounds more involved than the Ultra Class figure (which in my opinion was one of the simplest figures ever made, especially considering something of this size). In combined body mode, this figure really shines. The body mode looks good, is G1-accurate, and provides good mechanics as the center of a giant robot. He connects easily to other limb components, and mechanically well-serves the weight distribution challenges of a combiner. I guess one can always say that the jet mode has too much bulk on the underside, but all combiner jets in this history of TF has had that problem. Overall Silverbolt is a great figure. No wonder this figure is repainted into Cyclonus and Scattershot later.

CW Thundercracker is just a repaint of Thrilling 30 Starscream, while CW Windcharger is a repaint of Thrilling 30 Tailgate. So I won’t go into them too much.

CW Powerglide is a fun little figure. Both robot and jet modes are nice, and transformation feels adequate for a figure of this size. Powerglide is another figure where Hasbro has released an Ultra Class version. But true G1 enthusiasts will always think of Powerglide as a Mini-Bot, and so a legend class fig is much more appropriate. CW Bombshell is another welcome addition to this line. We already got Skrapnel (Shrapnel), so having Bombshell is a must (now I’m hoping they do Kickback). This Bombshell is a terrific figure in my opinion. Both modes are fun to play with. He comes together really nice in the beetle mode. Bombshell is my favorite Insecticon, so I am glad to see Hasbro give him a proper modern rendition.

Now onto the 3rd party purchases for the month. I still have not opened Military Titans as of this writing in April of 2016 (shame on me), so I won’t go into him. I did open ToyWorld Infinitor. This is an homage to Fortress Maximus, but a much more smaller and playable version. I never had the pleasure of the G1 Fort Max toy. There are re-issues out there, but he’s a huge piece that would take up way too much space for me. In the G1 cartoons, Fort Max is a city-size robot (like Metroplex). However in the comics, Fort Max is a large but ordinary size Autobot. I think that is what Infinitor is going for. Regardless, Infinitor is a solid, well-built figure. I can’t say for certain since I never had the G1 toy, but Infinitor feels essentially like G1 Fort Max shrunken down to playable size. He’s very blocky, like you would expect. The Headmaster gimmick is alive and well on Infinitor. He’s got the robot mode, a space cruiser mode, and 2 different city modes (though admittedly the 2 city modes look and feel similar). Overall I think this figure is ok. Get him if you like Fort Max, but not a must have in my opinion.

Finally, we are getting to the Masterpieces for the month. First up is MP Ultra Magnus, a figure that many fans have praised over and over. Some even go so far as to suggest that this should win figure of the year. Overall I think MP Ultra Magnus is pretty good. The alt mode could not be more G1. He scales well with other MPs in this mode. Transformation to robot mode uses the familiar scheme, but there are enough differences in the engineering to make him MP worthy. The robot mode of this figure is where I’m not as impressed. He’s still too blocky for me, and I was really hoping those brilliant Takara engineers could produce a robot mode that is more true to the G1 cartoon UM aesthetic. I hold MPs to a higher standard. Maybe figs like the MP-10 Optimus Prime set the bar too high, and I was expecting too much. Nevertheless, MP Ultra Magnus is a figure that is worthy of your collection. He’s not perfect in my opinion, but still something you should consider if you collect MPs or if you’re a fan of Ultra Magnus.

And last but not least, there is MP Bumblebee. This is a figure that gets no complaints from me whatsoever. We finally have in our hands the ultimate version of Bumblebee in all his G1 glory. The VW bug is nothing short of accurate. Transformation to robot is pure genius. And in robot mode, he looks like he jumped straight out of the G1 cartoon. Takara gave us another MP perfection in Bumblebee. He’s very well built and have amazing poseability. Oh, he also comes with Spike in his Exo-Suit, as seen in the 1986 G1 movie. This Spike figure is not bad, but I got this for Bumblebee, which is what I play with most of the time. If you could buy only one figure that I listed here for this month, get Bumblebee. You will not be disappointed.

That was a lot of TFs for one month. Things will slow down a bit after this. Til next time… Transform and Roll Out!

Today I’m going to feature some figures on the top layer of my Detolf shelf. I have assembled a collection of some of my favorite Season 1 Autobots from CHUG. For those of you that don’t know, CHUG is an acronym for Classics Henkei Universe Generations. These are all terms that Hasbro or Takara has used to label various Transformers lines that represent a modern update of classic G1 characters. I have also seen some fans refer to them collectively as G3, since it follows G1 and G2. Whatever you call it, they are all modern toy interpretation of Generation 1, though not necessarily in their exact G1 forms.

All these characters appeared starting in Season 1 of Transformers Generation 1.

There are a total of 6 figures here. I will describe each of them in depth, in the order of their release.

Optimus Prime, Classics, 2006
This Optimus Prime figure is part of the 6 initial figures that kicked off the Classics line back in 2006. It’s hard to imagine if Hasbro knew what kind of trend they were about to set in motion when these 6 figures took physical form. Hasbro tapped into something that was part of every action figure collector that grew up in the 80s with the launching of this Classics line. Anyway, this Optimus figure was one of only 2 Voyager size figures in the initial 6 (the other was Megatron, duh). To this day, this figure remains one of my favorite Optimus figures of all time. He looks good in both modes, the transformation was clever yet familiar for its time, and his overall appearance evokes instant G1 nostalgia while giving the character some mid-2000s updates. 9 years later as I write this, I still play with this figure from time to time. In the pics above he is holding his iconic G1 rifle that came as part of the BTS-03 G1 Prime Matrix of Leadership Upgrade Set by BTS Toys. I also have the FansProject G3 Trailer that can be added to this figure, but that was not featured anywhere on this blog. Maybe I should.

Sideswipe, Universe, 2008
For whatever reason, people love Sideswipe. I read a caption somewhere that stated he’s never done anything important, but he’s such a fan favorite. Maybe it’s because the G1 toy was such a good piece for its time. Or maybe it’s because he’s a fun loving character who does his job well without taking himself too seriously. Or maybe people just love his sexy Lamborghini alt mode. Whatever the reason, I gotta admit he’s also one of my all-time favorites. When the Universe toy came out back in 2008, I was beyond thrilled. And the toy did not disappoint. I knew Hasbro had no official licensing for Lamborghini, but I was pleased with the fictional alt mode they came up with to represent what would be a Lambo. The transformation of the figure is fun and satisfying. In the pics above, Sideswipe is using is G1 rifle and shoulder mounted missile launcher from the Heroic Duo Custom Kit Version 2.0 by Beelzeboss. I highly recommend this upgrade kit.

Jazz, Reveal the Shield, 2010
Jazz is another one of my all time favorites. Do a quick search for Jazz on this blog, and you will see there are many, many entries. Jazz is a character that has appeared in almost every TF continuity. In G1, Jazz completes missions with so much style and pizzazz, it’d be criminal if he was any cooler. This Jazz figure more than does justice to the Special Operations agent and Optimus Prime’s right hand man. I did a in depth review of the figure in this post, so I won’t do it again here.

Bumblebee, Age of Extinction, 2014
Bumblebee is a character that needs no introduction. He may be the most famous TF of all time, even surpassing Optimus Prime. Hasbro released so many CHUG Bumblebees over the years that I could have used many others for this lineup, but I used this one because I think he scales the best. And no, this is not the Generations Thrilling 30 Bumblebee. Though this is a exact repaint of the same mold, released as a Toys R Us exclusive 2-pack along with deluxe Age of Extinction Bumblebee (the modern Camero). That’s why I labeled it Age of Extinction above. This Bumblebee is a fun little figure. And I think that captures the spirit of Bumblebee. In the movie lines, Hasbro released way too many Bumblebees that are way too large and way too complicated. To me that is never Bumblebee.

Roar (aka Snarl), ToyWorld, 2014
Not counting the upgrade kits, Snarl is the only 3rd party figure on here. Technically he’s Roar, ToyWorld’s homage to Snarl. This figure is a gift to me from my fiancee. For a long time now, I was wondering why no third parties would do CHUG size Dinobots. Hasbro did do a deluxe size Grimlock, but that figure is not well received by most hardcore TransFans. No other CHUG Dinobots were made by Hasbro. Dinobots are forever fan favorites, so it seemed like a natural fit for third parties to come in and do what Hasbro will not. So it was a real mystery to me why no third party would attempt this. And believe me, there are no shortage of third party these days. But then all of a sudden, starting I think in early 2014, a whole bunch of third party companies announced that they will be making Dinobots. Off the top of my head, I can think of 4 CHUG size lineups (ToyWorld, FansProject, GCreation, Planet X) and 3 Masterpiece size lineups (FansToys, Bullsfire, GigaPower). Anyway I’m getting off topic. I love Dinobots, and I love ToyWorld products, so I had to have their Snarl. The toy comes in dino mode. Transformation to robot mode is well engineered and fun. I love how the hind dino legs can fold into the robot legs. This appears to be the trend with all the modern Dinobots. Construction of the figure is solid. Both modes look very G1 accurate. This is a third party figure I highly recommend. I already have TW Corelock (aka Grimlock) on preorder.

Jetfire, Generations Thrilling 30, 2014
Jetfire is a character with a rather complicated history in the world of Transformers. Originally based on the Takatoku toy of Macross VF-1 fame, Hasbro got the right to the merchandise of this toy and created the character of Jetfire. I’m not sure why he is called Skyfire in the G1 cartoons, or why the show designers decided to give him a somewhat different appearance from the toy. Whatever the reason, Jetfire became an instant fan favorite. As one of the very few Autobots that could fly in Season 1 of G1, the Jetfire toy was sought after by nearly every kid who was interested in Transformers at the time. Very early in the Classics line, Hasbro came out with a Voyager class toy that resembled the G1 cartoon look for Jetfire. That is an excellent figure, but in 2014 Hasbro released a Leader class figure that is even better! This Jetifire is a must-own. Both modes look sweet, and he looks like he jumped straight out of the show. Transformation is fun without being overly complicated. Some might even consider him too simple for his size, but I can easily overlook it due to the sheer fun factor. His massive size scales nicely with other CHUG figures. Jetfire gets the vote for figure of the year from many fans, and it’s certainly very hard to make a case against it. As of this writing, Jetifre can be found in store and online at MSRP (sometimes below MSRP). Make sure you pick up yours while you can!

Autobots… Transform and roll out!

Merry Christmas and Happy New Year!

Before I say goodbye to 2013, it is time to count up the Transformers for December.

• Generations Thrilling 30 Doubledealer, hasbrotoyshop.com, $15.99

• Generations Thrilling 30 Rhinox, hasbrotoyshop.com, $15.99

• Mech Ideas Apex and Geminus, tfsource.com, $69.95

• Crazy Devy CDMW-34, tfsource.com, $28.00

• Mech Ideas W-01 Longblast Upgrade Kit, tfsource.com, $15.95

• ToyWorld Trace, tfsource.com, $64.95

• Generations Thrilling 30 Ratbat, gift from Gemini

• TF Prime RID Vehicon with custom head, gift from Gemini

2013 ended on a good note with all these TFs! This might be the only month where I had more 3rd party items than offical Hasbro or Takara items. Altogether, there were 8 purchases for 7 figures (Apex and Geminus was one purchase, and add-ons I don’t count as figures). 9 items total, 4 official products and 5 3rd party products.

Doubledealer, Rhinox, and Ratbat I have not opened yet, but will soon. It’s kind of a drag that Doubledealer still has the same mechanical problems as Blitzwing. I was hoping Hasbro would get around to fixing it for Doubledealer, but no such luck. As for Rhinox, I am hearing good things about the figure, so I’m optimistic. Ratbat is a repaint of Generations Scourge. That is a fantastic mold, so I expect this to be good as well.

I haven’t opened the two upgrade kits either, but I plan to do that soon. I need to dig out Hercules, then add this Crazy Devy head to it to check out the LED visor. The Longblast Upgrade Kit is designed to work with RTS Special Ops Jazz. I think I will use this kit on my G2 Jazz of the same mold. But I mostly got this kit for the little Shockwave and Megatron guns. I can’t wait to try those guns with other CHUG figures.

I opened Trace as soon as I got him. I really liked Aurora, so I had to get Trace. ToyWorld did not let me down with this Chase homage. I’m very happy with how Trace turned out. He’s bigger than Aurora. In fact, he’s about the size of standard deluxes that Hasbro used to make in years past, while Aurora is that of the deluxes now in store (which are smaller). Check out pics in my last post for some size comparisons. I like how ToyWorld decided to base Trace on the Lamborghini Urus Concept. He looks pretty accurate to the real thing in alt mode. In robot mode, Trace is nicely proportioned, very poseable, and free of mechanical issues. I highly recommend this figure.

I heard good things about Apex and Geminus from Mech Ideas so I had to get them. At only about 70 bucks for 2 third party figures, they were a really good deal. Anyway, I also give these figures the highest possible recommendation. They are easy to transform and extremely fun to play with. They are obivous homages to G1 Jumpstarters Topspin and Twin Twist. If you need some figures to complete your Wreckers, then look no further. Apex and Geminus are durable and nicely detailed. Obviously they don’t have the original G1 auto transformation gimmick, but as adult TransFans we probably don’t much care for that anyway.

The Vehicon with the custom head is a gift from Gemini. This particular head works great with the Vehicon mold. Since this guy now looks different from the others, I think I’ll make him the Vehicon leader. I now have 6 Vehicons total. Getting a Vehicon as a gift for Christmas appears to be a trend lately. Probably won’t continue for 2014 haha.

OK, now let’s look at some statistics for 2013. Here is the break down:

• 26 figures from Transformers Prime
• 20 figures from Generations Fall of Cybertron (FOC)
• 23 figures from Generations Thrilling 30
• 10 Masterpieces
• 10 3rd Party figures
• 1 Power Core Combiner (PCC)

That’s a grand total of 90 figures for the year. It comes to 7.5 figures a month. This is less than 2012. For me that’s probably a good thing, since I have way too many TFs. I think I have been more selective in what I buy.

Also, I see most of my figs come from Generations. That’s great news, since I love CHUG. Also, Masterpieces and 3rd party figs I choose to buy are all G1 inspired. That means most of my figures are G1 derivatives. What else did you expect from a G1 guy? 🙂

And as far as the stats from month to month, I don’t really see a trend of when I buy the most TFs in 2013. Next year this might change, since it will be a movie year.

On a more personal note, I’m a little sad to be saying goodbye to 2013. This year has been good to me, both personally and professionally. I hope this good fortune will continue into 2014. And as for TFs, we know Hasbro will release a whole mess of figures since TF4 will be due out in the summer. Long time readers of this blog knows that I’m not the biggest fan of Michael Bay TFs (notice that for 2013 I did not buy a single movie TF haha). So I’m somewhat skeptical of the kinds of toys that will be put on the shelves. I just hope they don’t disturb the release of Generations.

Oh, and one more thing, I got some big changes planned for this blog in early 2014, so stay tuned. Happy New Year and long live Transformers! Transform and Roll Out!

There are quite of bit of figures taking up room on my shelf. Before I put them away, I’ll give them their 15 minutes of fame and feature them in a post.

Same pic, different angle.

From left to right
Top shelf, in robot mode: MMC Bovis, TFP Beast Hunters Shockwave, Fans Toys Quakewave, Masterpiece Acid Storm, Generations FOC Thundercracker
Top shelf, in alt mode: Generations Megatron, Generations FOC Kickback, Generations Blitzwing, TFP Breakdown, TFP Silas Breakdown, Generations FOC Shockwave
Middle shelf: Generations Orion Pax, Generations Bumblebee, Generations Springer, Generations Sandstorm, TFP Beast Hunters Optimus Prime, TFP Beast Hunters Ultra Magnus, , Generations Hoist, Generations Trailcutter
Bottom shelf: Masterpiece Prowl, Masterpiece Streak, Generations Blurr, ToyWorld Trace, ToyWorld Aurora

Can you tell who it is the oldest figure on here? That’s right, it is Blurr. I believe he was released 2010. I dug him out recently for display because he’s such an awesome fig!

With the exception of Blurr, Breakdown, and FOC Shockwave, all figures on here were acquired in 2013.

4 figures are from third parties: MMC Bovis, Fans Toys Quakewave, ToyWorld Trace, and ToyWorld Aurora.

There are 3 Masterpiece figures: Acid Storm, Prowl, and Streak. Though one could certainly make a case for Quakewave. He’s a third party fig, but he fits into the MP toys just fine.

OK, time to make more room for the figs of 2014. Into the closets these will go. Transform and Roll Out.

Once again it is the end of the month, where I count up the Transformers that have come into my possession for the duration. In contrast to September, I received all these TFs in the first half of the month. And in direct contrast to October of last year, where I set a record number of TF figures purchased in a single month, this October is quite modest in terms of figures bought.

• Masterpiece Acid Storm, Toys R Us, $74.99

• Generations Thrilling 30 Optimus Prime and Roller, amazon.com, $10.94

• Generations Thrilling 30 Bumblebee and Blazemaster, amazon.com, $10.94

• ToyWorld Aurora, bbts.com, $49.99

• Mastermind Creations Bovis, bbts.com, $89.99

This comes to a total of 7 figs for October. 4 figs from Generations Thrilling 30, 1 Masterpiece fig, and 2 third party products.

MP Acid Storm was a pleasant find (though that same day, he was also available online). I have been hunting at TRU for about a month on a regular basis before I found him early in October. I really like the new Seeker MP molds. Acid Storm is an exact repaint of MP Thundercracker, and I have already mentioned what a awesome figure that is. Acid Storm certainly does not disappoint. I really wish Hasbro would also re-release Starscream and Skywarp in the US in the new MP molds.

The little Generations Thrilling 30 figures were ordered from Amazon. I have never seen these in store. So when I saw them on Amazon for only $1 more than MSRP, I wasted no time buying them. Technically they were not from Amazon, they were from TFSource selling through Amazon. That particular arrangement worked out quite well for me. I don’t live in the same state as TFSource so I don’t have to pay tax, and this is sold through Amazon so it qualifies for free ship with Amazon Prime (which I have). Anyway, the OP fig is just ok. The Bumblebee fig is not half bad. They are fun distractions, and they pose well with Metroplex.

The two third party figs are nothing short of incredible! Aurora by ToyWorld is an homage to Searchlight, a G1 Throttlebot. This figure transforms quite well. He looks nice in both modes, and the construction is solid. ToyWorld does intend to make all 6 Throttlebot homages, and supposedly they will combine! I know G1 Throttlebots never did this, but it’s nice to see ToyWorld go out of their way to make this happen. Now that I’ve seen how cool Aurora is, I plan on getting the rest of them. I got Trace (Chase homage) on pre. Now I need to get Grind Rod (Rollbar).

That leaves Bovis. Fans have been gushing left and right on TF sites and forums about how well Mastermind Creations products are. They are right. Words alone cannot do justice to the quality that MMC have put into this figure. Bovis is a homage to Tantrum, a G1 Predacon. MMC is making the whole team. If the rest of the figs turn out as well as Bovis, then we are really in for a treat. Anyway, I transformed Bovis from robot to bull. He is a really solid piece that any G1 fan needs to own. Bovis is certainly large for a figure that can combine. Predaking will be massive! I love it.

Happy Halloween! Transform and Roll Out!

Behold my fellow TransFans! Feast your optics on my complete collection of G1 Throttlebots!

Back row (left to right): Chase, Wideload, Searchlight
Front row (left to right): Goldbug, Rollbar, Freeway

Haha ok I know these are not the most impressive bunch. But I guess my interest in this often forgettable sextet got rebooted after ToyWorld started making homages to them.

The gimmick of the Throttlebots is that they have the pullback motors that were very popular of toys back in the 80s. In G1, Jump Starters and Battle Chargers had this same gimmick as well. But those sub-groups also transform automatically as part of the release sequence (from alt mode to robot). Throttlebots differ in that they must be transformed manually, but the pullback mechanism can be initiated in either car or robot mode. As Transformers, they pretty much sucked. Though technically not repaints, all six figures in the group transform exactly the same. Like Bumblebee and Cliffjumper from Season 1. Transformation is super simple, even for G1 standards. All you do is raise the figure, flip out the arms, flip back the rear to reveal the head, and push in the motor. They have absolutely no articulation at all, a total fail even for G1.

The first of these that I got was Goldbug, at a Thrifty. I got him because he reminded me of Bumblebee (before I found out he is in fact Bumblebee). Not sure why I decided to get Rollbar and Freeway later. Guess I was bored and had some extra spending money. But yeah, these 3 I had since G1, and I know for a fact they’re the real deal.

Now that ToyWorld is making their homages, I decided to get the rest now in 2013. One seller had Chase and Searchlight, which I bought for $8 shipped on eBay (he took my best offer). Then I won another auction for Wideload at $5 shipped. These 3 are all used, but all in pretty good shape. As far as I can tell, these are all authentic genuine Hasbro products. Being able to complete the set at these prices was well worth it for a G1er such as myself.

I am looking forward to ToyWorld’s homages to this group. I thought it was kind of funny and weird for ToyWorld to update this particular team. But after I saw reviews of Grind Rod (Rollbar) and Aurora (Searchlight), I am quite impressed. They will supposedly combine into a Gestalt as well. Like I mentioned in my last post, I pre-ordered Trace (Chase), who is the 3rd fig in the group. I may need to order the first 2 figs before they’re gone.

Throttlebots… Transform and Roll Out!