Today I proudly present my Ramjet collection. I could swear I have more Ramjets, but this appears to be it. I did sell one Ramjet, but that figure was built so poorly it does not deserve to be in my collection. Yes I only keep the best.

I have a thing for Ramjet. The simplicity and stupidity of his attacks – very appealing. I would consider myself fortunate if I could solve all my problems like Ramjet. I’m not sure who would be my favorite Seeker. It’s either Starscream, Skywarp, or Ramjet.

From left to right: ToyWorld Combuster, Classics Ramjet, War For Cybertron Earthrise Ramjet

Some quick bits about each of these figs, in the order released.

Classics Ramjet

Classics Ramjet was released pretty early in the era of modernizing classic G1 characters, I think in either 2006 or 2007. Classics Starscream was released as part of the first wave of Classics, so we knew the Coneheads wouldn’t be far behind. Ramjet was the only one released in mass retail as part of Classics in the United States. For Dirge and Thrust, you had to either get them imported as part of Henkei, or wait for the later Generations line.

Classics Ramjet is still a fun figure today to pick up and play, but it is a dated figure for sure. Even for a CHUG fig, the robot mode has its limitations by today’s standards. There’s no waist swivel or ankle tilt. The arms seem a bit short as they don’t extend at all from jet to robot mode. The wings on the legs cannot fold back, so they are stuck extending straight outward.

As dated as this figure is, I still recommend getting one today if you can find one at reasonable price. The jet mode still holds up well. The figure is well constructed. Mine is still in very good shape despite an adequate amount of play. This Ramjet figure is a good first attempt at a modern day Conehead Seeker. And in the halls of TF history, the figure is a good representation of where we were and where we’ve been. This figure paved the way for better Conehead Seekers today.

ToyWorld Combuster

I kind of already summarized my thoughts about the ToyWorld Seekers back in this post. ToyWorld Assault (Thrust) was given more treatment here, and ToyWorld Requiem (Dirge) here. Today is Combuster’s turn. In short, I like Combuster way more than the official MP Ramjet.

Looking at Combuster now in 2021, it’s becoming a bit dated. The jet mode is still great, but the robot mode is beginning the show its age when compared with recent offerings of what a MP style jet robot could potentially be. I don’t have MP-52 Starscream, but I’ve seen enough pics, watched enough reviews, and have friends verbally confirm that the robot mode is out-of-this-world awesome. Looking at pics of MP-52, then looking at pics of Combuster, it’s clear who is a toy and who is the superior physical manifestation of a show character.

But don’t get me wrong. Combuster was a great 3P MP Ramjet for its time, and is still a solid transforming figure today. The jet mode is awesome and scales well with official MPs. The robot mode is a tad tall, which is perhaps the only real weakness in this mode. Combuster sports super solid construction backed by quality materials. The paint job is superb. Transformation is fun and intuitive. Complex enough to be MP, but definitely not frustrating. I don’t know if I would get one today, considering that HasTak would probably take the MP-52 mold and reformat that into Conehead Seekers. But as of this very moment, Combuster is still in my opinion the best MP Ramjet on the market.

WFC Earthrise Ramjet

My newest Ramjet figure is the one from War From Cybertron Earthrise. This was released in 2020 as an Amazon exclusive 2-pack with Dirge. And if you missed out on this 2-pack, it sucks to be you. As of this writing, this 2-pack goes for $219.99! Yikes. MSRP was $59.99. It’s only been about 18 months since release. I guess they seriously didn’t make enough, or damn scalpers are at it yet again. And in case you’re wondering, Thurst was a Target exclusive. And now that I think about it, Thundercracker and Skywarp was also a Target exclusive 2-pack. I’m conflicted about all these exclusivity deals that Hasbro is making. On one hand I’m glad they’re released, but on the other it’s like you have to be on top of releases or you’ll miss out. First world problems at its best.

But back to this Ramjet figure. This is by far the best and most G1 accurate Ramjet that HasTak has came up with. The overall mold is a re-work off of WFC Siege Starscream. When that fig came out, we all knew HasTak would repaint this at least 5 more times, one for each G1 Seeker. And they really made it happen. This figure is highly similar to the Classics Seeker mold, in that overall transformation feels identical. But many improvements are made to modernize the figure. For starters, it’s Voyager size, the size that Seekers should have always been. Ankle tilt has been added, for better stability in A-stance. The arms now have an extension mechanism, from jet to robot mode. Wings on the legs can how fold back. Yes all my gripes about the Classics Ramjet has been addressed. I think HasTak planned for all these repaints when they designed Starscream, because the mechanical differences in Ramjet feels fluid and not tacked on. My only gripe now is the weapons. WFC Ramjet still comes with the same null-ray blasters mold that Starscream has. He should have something that more resemble cruise missiles. I was expecting a 3rd party accessory company to do this (like Dr. Wu Customs perhaps). Maybe someone did, I’m not sure.

I totally recommend this figure. But I wouldn’t pay the scalping prices. My hunch is Hasbro would re-release this for a general release at some point. Wait for that.

“If it flies, crash it!” Wiser words have never been said. Maybe except this… Transform and Roll Out!
 

CHUG 2015 Lineup
Pic taken from Generations Season 3 Autobots.

• Combiner Wars Ultra Magnus
• ToyWorld Corelock (TW-D03)
• Generations Thrilling 30 Arcee
• Reveal the Shield Rodimus
• Generations 30 Thrilling Springer

CHUG 2021 Lineup

• War For Cybertron: Kingdom Ultra Magnus
• Studio Series 86 Grimlock
• War For Cybertron: Earthrise Arcee
• Studio Series 86 Hot Rod
• War For Cybertron: Siege Springer

 
Who wore it better? You decide.

Transform and Roll Out!

 

After a LONG hiatus from me documenting my monthly TF purchases, I’m gonna continue here. There’s a lot of TF purchase action in June. Let’s get started.

• Studio Series Brawl, amazon.com, $29.99

• Studio Series Megatron, amazon.com, $29.99

• Power of the Primes Snarl, Target, $16.99

• Power of the Primes Moonracer, Target, $16.99

• Titans Return Trypticon, Amazon seller, $103.65

• Zeta Toys Flyfire, gift

• NBK Bulldozer, showz.com, $9.99

• ToyWorld Constructor, chosenprime.com, $469.99

Brawl

SS 12 Brawl is my third movie Brawl figure. The first one is the original leader class figure that made 2 of my top ten lists (most difficult and broken). The 2nd one is the original deluxe figure, which I never opened. I really don’t have too much recollection of leader class Brawl. It’s a big figure, sitting at the bottom of a box in a closet somewhere. That’s the problem when you have too many Transformers; you just don’t have enough time for all of them.

It’s inevitable that there will be comparisons of this SS 12 Brawl to leader class Brawl from the first movie. And I can’t do that compare here. All I can do is rate SS 12 Brawl on its own.

Like all offerings in the Studio Series line, Brawl is packaged in robot mode, and comes with cardboard backing that may be used as the movie backdrop. In Brawl’s case, he gets a very fitting graphic of the battle in Mission City from the first movie.

Brawl’s robot mode much resembles his movie appearance. He only appeared in the first movie, but the toy designers captured his look in this figure quite well. Construction of the figure feels good. Joints are at the right tolerance, nothing too tight or too loose. There is a lot going on in this figure as far as weapons, but nothing feels out of place as the solid construction is able to keep it all together. Most of the fiddly bits clean up quite well in robot mode. And if something is dangling around, it is more intended as part of the design and not a production flaw. The back of the robot cleans up nicely too (which I should have took a pic). There’s not a lot of unwanted kibble on the back, so kudos to HasTak.

Brawl is a bit limited in the articulation category. Part of it is because of his design; he’s very bulky with lots of kibble, and that in itself limits articulation. The design of the feet, while movie accurate, don’t allow for any ankle tilt, which hinders poses. The hands are molded directly into the forearms, and don’t come out. Arm articulation as a whole suffers from all the weapons and extra kibble present all around.

Transformation to tank mode is fun. I don’t remember any other figure quite like SS 12 Brawl, not even the original leader class figure. The leg transformation is fairly straightforward. Arms form the tank turret, and they come together in an interesting and unique way. The hardest part to describe is the chest. This section folds on itself several times, and there are other minor pieces that complement this scheme to produce a robot to tank transformation unlike anything else we’ve seen before. SS 12 definitely gets points for transformation originality.

In my opinion, the thank mode looks really good. This is on par to the looks of the leader class Brawl figure in alt mode. In the movie, I think there is only one scene of Brawl in tank mode. It was when he was first summoned along with the rest of the Decepticons. This tank mode looks extremely close to that tank on screen. There are no working tank treads here, but I wasn’t expecting that for a $30 toy. With all weapons attached in tank mode, Brawl really looks like the menacing ground assault Decepticon that he is.

Brawl comes with 2 accessories: a missile launcher with 4 missiles, and a claw type weapon. Add to that all the molded-in weapons (the main cannon, 2 sub cannons, and 2 4-set missiles, all on the turret), he will give Age of Extinction Hound a run for his money as the TF with the most arsenal. I recommend SS 12 Brawl with no reservations.

Megatron

I never realized something until I started doing this post, and I had to confirm by looking at my TF List: I only have 2 movie Megatrons! Considering how many movie Optimus Primes I have, that’s almost a crime. The two movie Megatrons I have is Dark of the Moon voyager fuel truck Megatron, and The Last Knight voyager jet Megatron.

I never got the original jet leader class Megatron from the first movie, or the ROTF leader class tank Megatron. I didn’t want them as a silent protest to how Michael Bay completely butchered the G1 roots of Megatron and created this weird amalgamation that is supposed to represent the Decepticon leader. In retrospect, I kind of regret not buying them. From a pure toy perspective, they were unique, and Hasbro never released anything like them again.

So when I heard that the Studio Series are coming out with a new take on ROTF Megatron, I had to look into it. Here is the figure in robot mode.

I’m never gonna warm up to the looks of movie Megatron. I’m a G1 die-hard that will never recognize this as Megatron. But that being said, and rating purely on the toy’s representation of the movie depiction, I love the look of SS 13 Megatron in robot mode. His proportions are very balanced, and HasTak captured that alien bug-like appearance of Megatron really well. I like the giant sword weapon that he has in the right arm. All the mechanical tentacles on the left arm gives me a satisfying yet creepy conception of what could happen if they got hold of unsuspecting Autobots (or any other kind of prey).

Construction of the figure is solid. Megatron has the articulation chops for a variety of poses, and the solid construction allows him to hold those poses. For the most part, he’s a kibble-free figure. That’s not easily done with a design like his. Much credit to HasTak here.

SS 13 ROTF Megatron is not too shabby in alt mode, either. I like the look of this alien tank. I’m not sure how close it looks to the movie, though I will admit that my recollection of ROTF the movie is faint at best. I honestly don’t even remember Megatron in alt mode, but I’m sure there are fans out there that will correct me.

I do feel like SS 13 Megatron is one of those figures that, if you haven’t transformed it for some time, it will throw you for a loop. That’s especially true for robot to alt mode. This Megatron tank is alien, so there’s not the usual earth mode cues to go on. Everthing does tab into place, however, so you know you didn’t do something right if the resulting alt mode feels more floppy than solid. I think for that reason, I didn’t like this piece at first. But he grew on me, and on subsequent transformations, I regard SS 13 Megatron as one of the better figures in the Studio Series line. This figure gets my recommendation.

Snarl

Continuing the trend of the Power of the Primes Dinobots, this month we get Snarl. Grimlock, Slug (aka Slag), and Swoop were released in January, while Sludge came around in March. Snarl completes everybody’s favorite quintet of dinos.

He comes in robot mode, like all the other PotP dinos.

I really like Snarl, and I am happy that HasTak has finally given him some official love by updating the G1 version of this character. But PotP Snarl is a mediocre figure in every sense of the word. Overall transformation is the same standard scheme that every G1 fan is familiar with, albeit updated with some modern mechanics. He comes with his classic sword, but no blaster. Poseability is sort of there, not great yet not bad. Construction of the figure is adequate. Some parts are a bit too loose in my opinion, but not so horrible that the figure can’t hold any poses on its own. The figure is somewhat playable. You think he would be easy to transform, and that’s true for the most part. But PotP Snarl is one of those figures that, if you haven’t touched it for a while, it will surprise you with transformation impediments here and there. Not because it’s hard, but because there are little mechanical details that you are supposed to remember, but you don’t because you either forgot or didn’t think it’s important.

The one good thing about PotP Snarl is that he looks good in both modes. Here he is in dino mode.

For a retail deluxe class figure, I think the detail on PotP Snarl is more than adequate. You won’t confuse this character with any other.

The 5 Dinobots will combine. I never tried this, but I might if I get bored enough. I have mentioned before that I wish they didn’t, because implementing combination mechanics means putting restrictions on other aspects of the figure, such as the dino modes, robot modes, and sizes of the figures. Grimlock at voyager size is fine, but I do wish the other Dinobots are bigger than deluxe.

If you got the other 4 dinos, then you will get this regardless of what I say. It’s hard to see anyone buying just Snarl and none of the others. But if that happens to be you, then you are indeed an original. Bravo.

Moonracer

HasTak has been releasing many Fembots in recent years. The female Autobots was something completely made up by the G1 show creators in a desperate attempt to win over more girls to the toyline. Whether that worked is anyone’s guess. But what it did do is create demand for toys of the Fembots among the hardcore G1 TF nerds.

HasTak loves you and has started creating toys of the Fembots in CHUG. In January of 2015, Generations Thrilling 30 Arcee and Chromia were introduced. Then PotP Elita-1 was released in March of this year. This month we get Moonracer, one of the original 4 Fembots in the G1 episode “The Search for Alpha Trion”.

First let’s take a look at Moonracer in robot mode. Looking from the front, the figure is not half bad. She’s got a distinctive female body shape, and the head mold resembles her cartoon design fairly well.

But looking at Moonracer from the side, this figure becomes a total fail. Look at that huge backpack. Moonracer has got some serious back junk. Maybe that’s how Powerglide likes it.

Transformation to alt mode is pretty easy and intuitive, so I’m won’t describe it too much. Moonracer is a bit guilty of being a shell-former. Not G1 Scourge bad, but still a shell-former nonetheless. That huge backpack should have clued you in.

The alt mode itself is not badly done. I don’t remember how Moonracer really looked in alt mode, and I’m not going to look it up for the purpose of this post. Power of the Primes Moonracer has a vehicle mode that looks truly Cybertronian, and that works well enough in my book.

So do I recommend Moonracer? If it wasn’t for that giant backpack issue, I would classify this figure as good. But as it stands, Moonracer is still a decent toy. The robot mode is not half bad, as long as you’re only looking at it from the front. Poseability of the figure in this mode is solid. I have no complaints about the alt mode. But if you’re even remotely thinking about buying Moonracer, you are probably a G1 fan that grew up with the cartoons. If that’s the case, you will go buy this figure no matter what I say. Having these characters come to life 30+ years later is a G1ers dream come true. Go buy the figure and fully engage yourself in the TF nerdgasm that is Moonracer.

Trypticon

I first reported on the news of a Trypticon release back in March of 2017. I think in the fall of 2017, Titans Return Trypticon was released. It’s generally agreed that this is a good fig, though reports of hips breaking from the super tight hip ratchets put a damper on things. There are many proposed fixes out there; Google the topic and you’re bound to find some good ones.

With Metroplex and Fortress Maximus, the prices quickly dropped after only a few months of its release. I’m not sure why that is. My theory is that there are only so much demand for such figures. Titans class figures that are clearly G1 inspired would only appeal to the most hardcore G1 enthusiasts, willing to part with hundreds of dollars on a single Transformer figure. The average Transformer fan would take a look in store, stare at the figure in awe, and walk away. Little kids who happened on these figs in the toy aisle would have a hard time convincing their parents to buy such items, and that’s if they even took an interest in the first place.

MSRP for Trypticon is $149.99. Not surprisingly, the fig was going for around that much upon first release. But I was expecting this to follow the pattern of both Metroplex and Fort Max, and have the price reduced soon. I got Metroplex for a bit over $100, and Fort Max for $75. The 2017 Holidays rolled around, and Trypticon was still close to MSRP. I think the lowest I saw at the time was around $120 on Amazon, and after adding in tax it would go over $130. I thought it could go lower so I waited, but then the stock dried up and no more Trypticons would go on sale for a while.

Fast forward to June of 2018, and I saw one third party seller offering this at $103.65. This was a third party seller on Amazon, and not in the same state as me, which means no sales tax. So I quickly jumped on this and got me Trypticon.

I am disappointed to report that, to this day, my Trypticon still sits in the closet, unopened. I don’t know why I’m so hesitant. Maybe it’s because I know of the hip ratchets issue. Maybe I was always more of a fan of Metroplex. Or maybe I’m just too busy, with a 2 year old baby girl in the house.

But I’ll get to this one day. And if you’re reading and think you missed out, don’t. I just checked. Amazon has Trypicon at $109.99, while bbts has it at $99. Value of Trypticon has not gone up at all. Maybe the hip ratchets thing really hurt it. Compare that to Metroplex, which third party sellers on Amazon list at about $650.

Flyfire

I first mentioned Zeta Flyfire back in this post. And in the purchase post for last month (May 2018), I went into Air Strike. So I won’t repeat all that stuff here. Just know that these 2 Zeta Aerialbots are highly similar, definitely cut from the same cloth.

In the pic below, you see that Flyfire uses the exact same kind of packaging as Air Strike. And just like Air Strike, Flyfire comes with the same number and kind of accessories: a rifle, 4 missiles, instructions, and bio-card. Very minimalist, and in my opinion not a bad thing.

Flyfire in bot mode below.

Overall, I would say that Flyfire is about the same as Air Strike in robot mode, but comes together better in jet mode. I mentioned that, for Air Strike, there’s this weird issue with the front landing gear in jet mode. Flyfire has no such issue. It seems like Zeta fixed these minor annoying things this time around. Flyfire is the sophomore release in this series and it shows.

As of this writing, all 5 Zeta Aerialbots are released. My friend Gemini has all 5, and pics of the combined mode into Zeta Superion is impressive. However, Fans Toys have come out with their own set of Aerialbots. I have not yet decided if I want to stick with Zeta, or change direction mid-course and go with Fans Toys. I have a hunch that I will make this decision based on how I feel about Roadking, FT’s version of Motormaster. I received Roadking a few weeks ago, but have not had a chance to open the fig yet.

Bulldozer

By the end of 2015, there already exist several modern interpretations of Constructicons. Two were done by 3rd party: TFC Toys Hercules, and MakeToys Giant. Hasbro also released it’s own update on this popular combiner group. None of these sets are perfect, each with its pros and cons. But all of them can be considered good, and you can make a case for each as to which is the best. Instead of being forced to choose just one and suffer analysis paralysis, I got all 3. And if you were to point a fusion cannon to my head right now and force me to choose the winner among these 3, I probably go with Hercules by TFC Toys.

As if all these options weren’t already enough, in 2017 two more 3rd party companies decided to enter the fray and do their own take on Constructicons. One is Constructor by ToyWorld, which is the next entry (scroll down below). The other is ReBuilder by Generation Toy.

For those that don’t know, NBK is 4th party (read: knock-offs of 3rd party). I have no idea what NBK stands for. In this case, NBK Bulldozer is a knock-off of Generation Toy ReBuilder GT-99D Bulldozer. NBK didn’t even bother giving this figure a new name and just stuck with Bulldozer. And we all know this is supposed to represent Bonecrusher.

So is NBK Bulldozer any good? For a knock-off, it is surprisingly good! It’s packed in alt mode. The box is very minimal, but I will stress again I consider that to be a plus. As for accessories, he comes with a pistol, and the attachment that will become the forearm.

In alt mode, all pieces come together to form a nice cohesive whole.

There is placement for the forearm attachment in alt mode. It can be hooked up to the rear, like a trailer.

The pistol can be folded and tucked underneath the vehicle. See if you can identify where it is in this pic.

I’m guessing Generation Toy took some liberties with the design of Bulldozer, but to me he still seems very G1 for the most part. For color issues, the giant one that immediately pops up is why is the bulldozer blade purple. That’s probably a question that only NBK can answer. Knock-offs are notorious for botching color schemes, and whether or not that’s intentional is anyone’s guess.

Transformation is fun. And I will emphasize that again… FUN! That’s something I feel is often missing from today’s Transformers. 3rd party will often make something that is impressive in how it transforms, but transforming it becomes a chore. And as for HasTak, sometimes the figure is so simple, there is no fun. Sometimes bad construction issues ruin an otherwise well designed piece that would have been fun. NBK Constructor suffers from none of these pitfalls. The superb design is probably more a credit to Generation Toy, but NBK has built a piece that feels more than solid enough to be played with. All joints are at the right tolerance. Things snap together when they need to, and come apart when they should.

The transformation process itself should be familiar enough to anyone who has played with enough G1 style TFs in the modern era. But it’s not super-obvious either, with enough challenge to offer mature fans something to marvel at. Some G1 diehards will complain about transformational design changes, such as the 180 turning at the chest and how the bulldozer blade splits and ends up on the shoulders. I personally feel these are refreshing changes that offer a different yet familiar take on an old and tired scheme.

Below are some pics of the robot mode. I’ll let them do the talking.

Again, G1 diehards will complain about the non-G1-ness. But I like it. Bulldozer is well proportioned in robot mode. He looks different enough from G1 Bonecrusher, but still similar enough to be Bonecrusher. The figure is pretty poseable. And again, I don’t know if the purple bits are by design, this being knock-off and all.

The head mold should satisfy all G1 requirements.

The designers of this mold did account for storage of the arm attachment in robot mode. I guess this is supposed to be a giant backpack thruster kind of thing. It’s kind of hokey, but hey, they tried. Points for effort.

As for the arm attachment in combined mode, the fist flips out from inside the forearm. I like this. I’m not a fan of using extra combining pieces, and GT really minimized this in the design.

Overall I really recommend this toy. Get the Generation Toy version if you don’t mind spending the money. Or get this NBK KO version if you’re on a budget. Speaking of being on a budget, this is the first and only time I got something from ShowZ. I heard about the store, prior to this. At only $9.99 for NBK Bulldozer, I had to try it. That’s $9.99 from China, no extra shipping fees and no taxes! The figure arrived in reasonable time. So if you’re hesitant about the store, don’t be. ShowZ is legit. It’s not one of the China scammers that I have wrote about.

As of this writing, I do have all 6 of the NBK knock-off Constructicons. But I’ll save my thoughts about this NBK set for another day. Because we have something extraordinary to get to. And that is…

Constructor

I saved the best for last. Ladies and gentlemen… I give you… (drum roll)… Constructor!

I will say this right now, so you don’t have to read through all the details: if you want the best Devastator in this modern era, then pick up ToyWorld Constructor. This is hands down the best team in the combined form! If you care nothing for the individual robot or alt modes, then this is the set for you. ToyWorld Devastator is truly worthy of the name, and will put all other Devastators to shame.

But just to be complete, I will show pics of the other modes. Below is each fig in alt mode.

Individually in robot mode.

And now the pics you have been waiting for… the combined mode! Behold the awesomeness that is ToyWorld Constructor.

I spent $469.99 buying this set, and in this form, he’s worth every penny. Constructor is at the size he needs to be to properly scale with MPs. ToyWorld really hit it out of the park with this awesome set.

Doing a full review here won’t pay enough homage to group, so I intend to do a separate review later. So I will quickly list some pros and cons in bullet points.

Pros:

• Awesome Devastator! (I can’t say that enough)
• Solid build and construction
• Nice individual robot and alt modes
• G1 accurate – TW took very little liberties in the design
• Fun transformation that’s intuitive and not frustrating

Cons:

• Uses combining parts – and many of the parts have nowhere to go when in individual mode
• Individual modes do not scale well in MP – way too big

The bullets in Cons are points you kinda would expect, for Constructor to be so good. Unless someone really figures out show to mass shift, either the combined mode would be too small, or the individual bots would be too big. TW took the latter approach, but that’s to give us a Devastator that is truly representative of what we see in G1. As for using combined parts, I will concur with the naysayers and agree that it’s kinda cheating. Especially when the parts have nowhere else to go in the individual modes. But the proportions of Constructor is so good, I’m almost willing to forgive this. Almost. How you feel about using combiner parts is up to you, but I still see it as a negative.

When this set was first released, each bot had to be purchased separately, costing about $100 each. TW has gone away from that and now only release the complete set as one. The edition that I have here is the regular edition. It’s a very minimal set that only comes with the essentials. I don’t even remember if I have the Devastator gun, I’ll have to check. Other editions come with extra heads and different color thigh parts. TW knew they had a winner here, and kinda went crazy and released all sorts of different versions of Constructor. There’s a yellow one, an orange one, a clear green one, a clear orange one, a limited edition metallic one, and some more that I don’t remember. As of this writing, this regular edition that I feature here is on longer available. But there is a limited ultimate edition that costs about $500. I’m not sure what’s exactly in this ultimate version, but I see that it has more realistic paint. Some minor tweaks to the molds were made, probably after getting fan criticism on certain issues. It might come with all the extras. For only $30 more on top of what I paid, I wish I waited for this version. Oh well. Am I hardcore enough to get this version too? Most likely not. Probably not. I hope not.

And another quick FYI… sometimes the other color sets may go for crazy cheap. I think I have seen the clear orange one go for $299. It might have been ShowZ. Or maybe one of the other dealers on a weekend sale.

Whew… that was a WAY longer post than I had intended. Sometimes when the writing mood hits me, I don’t stop. This may have been my longest post ever. Longer post equals more proof reading, something I hate doing. It takes time away from playing with the awesome figs featured here.

Transform and Roll Out.

 

I got a bunch of third party Masterpiece-styled red jets lying here and there, so I thought I compile them and make a post. Here they are.

From left to right: ToyWorld Assault, Zeta Toys Flyfire, DX9 Richthofen

Assault

This 3P homage to Thrust by ToyWorld is an incredible figure. I kinda went into their awesomeness back in this post, see that for all the details. Lots of TransFans give these TW Coneheads a hard time, and I say they’re totally trippin’. Don’t believe them. Subscribe to my TF authority and go get these while you can.

Flyfire

Newcomer Zeta Toys is responsible for this 3P MP homage to Aerialbot Fireflight. Fireflight is probably my least favorite Aerialbot. His alt mode as a F-4 Phantom is one of the worst of the jets. And he has no personality whatsoever. Honestly, I can’t really say anything else about him. Other than he was mysteriously missing when all the other Aerialbots were fighting that giant purple robot griffin in “Aerial Assault“, one of my favorite eps from G1.

Zeta Toys is supposedly a split-off from ToyWorld. Well, split-off may be too professional a term here. What I heard is that the design engineers at ToyWorld didn’t feel they were getting what they deserved and had a falling out with management. So they took their designs, left ToyWorld, and formed their own company. The result is Zeta Toys. This is evidenced by how some products overlap between ToyWorld and Zeta.

Anyway, back to Flyfire. I like the figure. He looks good in both alt mode and robot mode. The engineering is top-notch, and I wouldn’t have expected any less from the designers behind some of ToyWorld’s best offerings. The transformation is satisfying, striking a good balance between complexity and fun. Flyfire is Zeta’s second Aerialbot, the first being Airstrike (Air Raid). I liked Airstrike as well, but there were some minor construction hiccups here and there. Zeta has obviously learned their lesson from that first offering, and as the sophomore figure Flyfire is much more polished. At only $65.99, Zeta is making these extremely affordable. However, that does come at a price. The materials used for both Flyfire and Airstrike feels incredibly cheap for something that is supposed to be MP quality. That’s pretty much my only complaint about these figures. Next to TW Assault, the cheap plastic become more than obvious. I wonder if TW planned to make these with superior materials, but now we’ll never know. But as it is, Flyfire is still a recommended figure. These are currently the best MP styled Aerialbots you can buy on the market.

ZT is getting quite clever with the naming. Hasbro can no longer use the term Fireflight, so modern productions of this character go with Firefly. ZT just reversed it and call it Flyfire. What will these crazy Chinese engineers think of next.

Richthofen

The last of these 3P MP red jets is DX9 Richthofen. I had to Google what is Richthofen. Apparently that was the last name of the Red Baron. Anyway, this figure is obviously Powerglide. And what a figure this is. I have been really enjoying all my purchases from DX9, such as Invisible, Carry, and Gewalt. I hold DX9 in the highest regard possible, and they did not let me down with Richthofen. This is an amazing figure.

Both alt mode and robot mode looks good. DX9 really studied the G1 animation models and produced a figure faithful to the show’s appearance. Unlike Flyfire, nice quality materials are used for the figure. Construction of Richthofen is superb. In fact, it may be too good, as all the joints are super tight. My hands hurt when trying to transform this guy. This may be due to the fact that some productions runs of Richthofen had a manufacturing problem, where there was a loose tail fin. DX9 corrected this in later runs, but the result is all the joints became way too tight. I got one such figure. Still, I rather have joints that are too tight than too loose.

Other than the tight joints, Richthofen is a blast to transform. It’s just the right amount of complexity and challenge. I’m hoping the joints will soften after a few transformations. He even comes with a Astoria figure, from “The Girl Who Loved Powerglide“. And when you open his chest panel, there is a heart shaped mold engraved there. Gotta give DX9 points for show accuracy, as cheesy as this feature is.

Richthofen has a place in your collection.

Transform and Roll Out.
 

Some very good items were purchased in August of 2017.

• Optimus Prime Autobot Legacy 2-Pack (Amazon Exclusive), amazon.com, $29.99

• The Last Knight Hound, Walmart, $26.86

• ToyWorld Assault, Combuster, Requiem, tfsource.com, $159.99

Optimus Prime and Orion Pax

I’m not sure what is the official name of this 2-Pack. This Amazon exclusive is officially listed on their website as Optimus Prime Autobot Legacy 2-Pack. I have seen it listed elsewhere as the Optimus Prime Evolution Pack. There is also the name of Transformers Tribute written on the upper left corner of the box. And I’m not sure if this falls under Titans Return, Power of the Primes, or something else. But whatever it’s called, it’s a good 2-Pack to have.

Both figures in the set are repaints. As of this writing, I have not opened the set. The Optimus Prime figure is a repaint of War For Cybertron Optimus Prime. I see some minor paint app differences between this release and the WFC figure, and I’m gonna assume everything else is the same. Do not underestimate the complexity of this deluxe figure. If I am to compile a top 10 most difficult Transformers list today, this figure would easily make the list. The Orion Pax figure is a repaint of Titans Return Kup. This is an excellent mold to be re-used as Orion Pax.

Buy this set if you don’t have either of the figures used as the base for the repaint. But even if you do, this set is still worth getting. There has not been that many Orion Pax figures made. Not counting this one, I only recall two others. One in Generations Thrilling 30, and another as the base figure in the Leader Class Evolution Optimus Prime that will be released in the Power of the Primes line. This 2-Pack adds another Orion Pax to your collection and that alone is worth the price of admission.

Hound

This is my second figure from The Last Knight. TLK gave us another excellent Hound figure, after the superb Hound we got from Age of Extinction.

The figure comes packed in robot mode. In this mode, he’s a bit stocky, but that may more accurately reflect his movie proportions. Arm articulation is decent, but there’s not that much going on in the head, chest, or legs. The front wheels of the vehicle mode transforms into the feet. This makes standing the figure somewhat challenging. Not impossible, but you will have to balance Hound just right if you want to get him into any kind of action pose.

He comes with five pieces of weapons: 2 pistols, 2 heavy rifles, and 1 weapons connector type thing. There are many ways to assemble and configure this assortment.

Transformation of TLK Hound is where this figure truly shines. The overall transformation mechanism is one of the most unique I have seen in some time. I mentioned that the feet becomes the front wheels, but worth mentioning are other engineering feats besides the feet (pun intended). The legs collapse in an impressive way too complicated to explain in words. The arms are placed bent in alt mode and it works. The entire package is well constructed. When done right, the alt mode feels like a cohesive whole.

TLK Hound looks a bit different from AoE Hound in alt mode. I don’t know if either is movie accurate, and I won’t bother looking into it because both movies pretty much suck. AoE Hound is more of a van, while TLK Hound is more of a pick-up truck with a scary big missile launcher attached on top of the bed. TLK Hound is in a lighter shade of green, which seems a bit more movie accurate as far as I know.

TLK Hound appears below with other TLK figs Barricade, Drift, and Bumblebee.

Overall, I like TLK Hound. The transformation is unique, and the alt mode comes together well. TLK Hound doesn’t sport as many weapons as his AoE counterpart, but what’s there is more than sufficient.

I should note that the Japanese version of this figure comes with a riot shield. And I’m guessing the shield goes over the bed of the truck in alt mode. But since I don’t have that version, I’m not able to say if that significantly enhances TLK Hound in any way.

Some will inevitably ask which is the better Hound. In my opinion, AoE Hound is superior. AoE Hound is sleeker looking, has more weapons, and a robot mode that is easier to stand on. But these two figures are different enough that comparing the two is like comparing apples and oranges. If you like movie figures, get them both.

Requiem, Assault, and Combuster

Every once in a while, you find a deal so awesome that you immediately jump on it’s purchase. That was the case with this set of Masterpiece style Conehead Seekers from ToyWorld. They usually retail for a bit over $100 each. So at $159.99 for the set of 3, I wasted no time clicking on that “Buy” button and made sure this online transaction entered the vendor’s system. This was a Labor Day sale. It didn’t take long before this set sold out at this amazing price.

I have documented my long and utter disappointment with the official MP Conehead Seekers, back in this post. So I won’t rant again here. The only thing worth repeating is that they suck, and no self-respecting TransFan should spend any of their hard earned money on such garbage. I have since sold MP Ramjet, and have been looking for 3rd party substitutes for the Coneheads. Thus I’ve had my eye on this set for some time now. Seeing this spectacular deal, I acted with haste.

My fellow TransFans, this is the set of MP Coneheads that you should have in your Decepticon forces. TW gave us a completely new design on MP Coneheads that has far surpassed all my expectations. I touched a bit on the sheer brilliance of these figures in this post about Decepticon air superiority, but some of that is worth repeating here. But before that, let’s take a look at the jet mode, which is what the figures come packed in.

ToyWorld Requiem (Dirge) in his beautiful jet mode.

ToyWorld Assault (Thrust) in his beautiful jet mode.

No scale issues with official MPs in jet mode.

Assault and Combuster in jet mode.

Now let’s look at the robot mode.

All 3 look excellent in robot mode. Nice and slender build, unlike the fat bulky MP Coneheads.

Each figure comes with 2 black display panels that can connect both vertically and horizontally. In these pics I am using all 6. They are also used in the pic above for Hound and the other cars.

In robot mode, the TW Coneheads are quite a bit taller than official MPs.

The TW Coneheads really deserve a review in a separate post, but I’m gonna give some quick thoughts here:

• Both modes look good – no complaints from me as far as the appearance of both jet and robot modes; see the pics for yourself
• Amazing build and construction – nice and tight joints, no quality issues here like the MP Seekers
• Great materials used – these figures feel solid and heft, and by comparison the MP Seekers feel cheap and sloppy
• Excellent design and engineering – an intuitive and enjoyable transformation that is many times superior to official MPs
• Each figure comes with 2 black display panels – TW didn’t have to include this but it’s a great addition
• Front landing gear of each jet and be hard to get out, but that’s a minor complaint
• Requiem (Dirge) and Combuster (Ramjet) come with firing missiles – and they FIRE! Careful not to lose them, they shoot pretty far
• Cockpits open in jet mode
• No scale issues in jet mode with official MPs
• In robot mode, TW Coneheads don’t scale so well; they are a tad taller than official MPs, which may be a turn off for some (see above pic)
• When you have all three and assemble the boxes, they form a nice big image

There is much more I should mention about this set, but I’ll reserve that for my review. I give the TW Coneheads the highest possible recommendation, and that’s the bottom line. If you are looking for Masterpiece style Coneheads for your collection, look no further.

Transform and Roll Out.
 

Here we are again. Another St Patrick’s Day, another post for my green Transformers.

Featured in this year’s green and mean machines:

• Titans Return Hardhead
• MakeToys Gundog
• Toyworld Hardbone
• Unique Toys Allen
• Generations Thrilling 30 Springer

For the first time in the history of these St Patrick’s Day posts, the number of third party figures outnumber the official HasTak figures. Very indicative of the trend in the hardcore TF fandom.

Another weird trend: this is the 4th blog post in a row that I have featured MakeToys Gundog. This is not be design. Maybe I’m secretly in love with Gundog. Smart readers will notice that I took this pic before my last post about the rub on decals, since Gundog still is shown here with his sticker faction logo.

And in the tradition of these St Patrick’s Day posts, I have to mention March Madness. My beloved UCLA is already knocked off in the First Four! They couldn’t even get to the First Round. And I never thought I would see this in my lifetime, but a No. 16 seed has knocked off a No. 1 seed! UMBC just eliminated Virginia in the First Round! This totally busts by bracket. Yes, I picked Virginia to win it all. This is much like 2012, when I picked No. 2 Missouri to win it all and they were upset by Norfolk St. I don’t even know why I try. But this is historic! UMBC didn’t just win, they completely dismantled UVA. And Virginia wasn’t just a No. 1 seed, they were the overall No. 1 in the Tournament. UMBC is a school you have never heard of (unless, of course, you’re from there). You could Google what UMBC is, but after tonight, everyone will know them as U Must Be Cinderella.

Here are links to previous St Patrick’s Day posts:

2015
2013
2012
2011

Have a safe and happy St Patrick’s Day everyone. And congratulations to UMBC! Transform and Roll Out.

 

Exactly 5 years ago on this day, I presented a short post about Decepticon Air Superiority. Well, 5 years later, I also find myself with lots of Decepticons jets lying about here and there. So it’s time for another post that will remind the Autobots of Decepticons’ sheer and utter dominance in the not-so-friendly skies.

The 5 jets presented here are all very nice figs that represents how far transforming toys have come. All of them have clever engineering mechanisms that showcase how well a transforming jet can be made today. The oldest figure here, in terms of when the mold was first released, is Masterpiece Starscream. What I have here is a 2017 re-issue of the MP-11. I missed out on the MP-11 when first released. But I have enough other characters that utilize this mode, including MP Thundercracker (picutred 5 years ago), MP Acid Storm, and MP Sunstorm. This mold is the 2nd one used in the official MP line from Takara. The design feels a little dated today, and the mold’s poor durability after all this time is well documented. But I’m glad to finally have a Starscream in this mold in 2017. And the copy of I have feels ok in terms of build quality.

The two jets in front are some of my most recent acquisitions from The Last Knight: Voyager class Megatron and Nitro. Megatron is the dark grey futuristic looking jet, and Nitro is the light grey F-16 with the black nose cone. Both figures are excellent additions to the LK line. Megatron is a pure joy to transform and play with. Both modes look good, the figure is well built, and the transformation is fun, intuitive, and refreshing. Nitro is one of the more difficult figures in the LK line. But he’s a testament to modern TF engineering. He’s a non-symmetrical transformer, like many of the motorcycle figs. In jet mode, when done right, he comes together so well that the difficult and frustrating transformation sequence is easily forgiven. Both figs were acquired in the past 2 weeks.

The black jet in the center is Combiner Wars Skywarp. I acquired him in November of 2016, and left him out in the open all this time.

Last but not least, we have ToyWorld Requiem, their MP styled homage to Dirge. He’s the blue jet with brown wings. And let me tell you: this is an amazing figure! A lot of other TransFans are turned off by these TW Coneheads because of their scale. Yes in robot mode they are a bit tall. But seriously, don’t let that discourage you! These Coneheads are so well built and designed that they put official MP Seekers to shame. The TW Coneheads have a nice heft to them, and in your hands they feel more like the real deal and make official Takara products feel like knock offs. The Takara Seeker mold is so used now that figures produced feel cheap and sloppy. My Starscream (mentioned above) feels ok, but some fans have not been so fortunate. I have outlined how poorly my official MP Ramjet is in terms of build quality. TW Coneheads have no build issues whatsoever. All joints feel nice and tight. But what ultimately impressed me about TW Requiem is the design and engineering. The transformation is many times superior to Takara MPs. It’s enjoyable and intuitive, and the nice and solid construction means that everything properly tabs into place. In robot mode, Requiem looks slender and sleek instead of wide and bulky. I got the set of 3 TW Coneheads for only $159.99 from TF Source on a sale in August. This is probably the best TF purchase I have made this year.

So who is leading this bunch? LK Megatron? Or MP Starscream? You decide.

Transform and Roll Out.

 

July 2016 is blessed with a heavy dose of TF goodness. This month marks the start of a new TF line – Titans Return! TR is Hasbro’s official update of Headmasters, and I have been looking forward to this series of figures for quite some time now. July also includes some excellent third party acquisitions.

• Titans Return Galvatron, Toys R Us, $24.99

• Titans Return Sentinel Prime, Toys R Us, $24.99

• Titans Return Skullsmasher, Toys R Us, $16.99

• Titans Return Hardhead, Toys R Us, $16.99

• Titans Return Scourge, Toys R Us, $16.99

• Titans Return Blurr, Toys R Us, $16.99

• Titans Return Stripes, Target, $10.29

• Combiner Wars Starscream, HasbroToyshop via eBay, $35.99

• Masterpiece Ramjet, tfsource.com, $179.99

• ToyWorld Muddy, tfsource.com, $80

• DX9 Carry, tfsource.com, $129.99

Quick sidebar: I started a new job in July. It was bittersweet to leave my last job, after 9 and a half years there. For reasons that I won’t go into, it became obvious that I should no longer stay at that job. I like my new job. I won’t say that it’s better than my old job in all aspects, but I’m playing the long game, and I’m confident that this new position will work out better for me in the long run. Besides, my new job allows me more time to dedicate to this blog. This was the first post after starting the new job. I have been more consistent in making new posts since then.

Those of you that read this blog regularly know that I like to hit up stores at lunch time and hunt for TFs. And just like my old job, there is also a TRU near my new job. The very first week on this new job (I think it was Day 2), I found the Titans Return figures at the TRU! I say this is a clear sign that I made the right decision in taking this job.

Titans Return

So let’s go over these TR figures first. I found all the Wave 1 deluxe and voyager figures in one shot. The 4 deluxe figs are Blurr, Scourge, Hardhead, and Skullsmasher. And I like them in that order, from best to worst.

Blurr is an awesome fig. The alt mode is extremely cartoon accurate in appearance. The robot mode is nice and proportionate. Transformation is smooth and intuitive, complex enough to feel like it’s not made for kids, but not too complicated that it distracts from the fun. Construction of the figure is superb, no joints too loose or too tight, and no tolerance issues. My only gripe is the color. The US version of TR Blurr is like this dark turquoise color. Why they decided to go with this color scheme is beyond me. Especially since the Japanese version (called Transformers Legends) has G1 accurate colors. For that reason, many hardcore G1-ers have decided to import the Japanese version. I may do that myself at some point. Blurr was never a Headmaster in G1. In TR, his Headmaster partner (now called Titan Masters) can fit comfortably inside the vehicle in alt mode, and attaches nicely in robot mode. All in all, TR Blurr is highly recommended, despite my gripe with the colors.

TR Scourge is a solid fig. Like Blurr, G1 Scourge was never a Headmaster. And like TR Blurr, the Japanese version of TR Scourge has a color scheme more similar to G1. TR Scourge has a much more accurate cartoon alt mode appearance over the Generations figure that was released around 2011. Sometimes in the cartoons, you see Scourge fly around in alt mode with his head exposed, on top of the spaceship. With TR Scourge, you can reproduce that look. All you need to so is stick the Titan Master in head mode on top of Scourge in alt mode. I like the robot mode as well. When compared to the robot mode of the Generations fig, it’s debatable which is more toon accrurate. They each have their pros and cons. But in my opinion there are no obvious weaknesses with TR Scourge in robot mode. He’s fun to transform, and he’s well built. Scourge became a Targetmaster in Season 4, so I guess making him a Headmaster is not that far-fetched.

Hardhead was one figure that I was really looking forward to in TR. I always regretted not buying the G1 figure, and I had many opportunities to. As a kid in the 80s with a very limited allowance, G1 Hardhead was a bit out of my price range. But I always liked his alt mode, and the robot mode wasn’t too shabby for G1 standards. I do have Hardbone, ToyWorld’s take on Hardhead. I highly recommend that figure, though as of this writing, you may want to consider Iron Will by MakeToys if you are in the market for a 3P Hardhead. Anyway, back to TR Hardhead. He’s only ok. I like the alt mode and the robot mode, but the figure feels a bit flimsy. During transformation, the figure feels extremely hollow. I think the reason for that is equal parts design and construction. And speaking of construction, Hardhead is not the best. He’s ok, but some parts are too loose for my liking, especially in the legs and hips. This figure could have turned out so good if they made some design tweaks, and if the build was improved to have better tolerances. His floppiness is so not worthy of the name Hardhead. As is, I can only recommend Hardhead to hardcore G1 devotees like myself. Casual TransFans should invest their money elsewhere.

Last of the deluxe TR figs is Skullsmasher. In G1 he was called Skullcruncher. I can only assume Hasbro renamed him for license reasons. This alligator Headmaster is probably one of the most unique in the world of TF. I mean, what other figure transforms into an alligator? And on that point, Skullsmasher is awesome. I love his alt mode. The toy designers really hit it out of the park with the look of the mechanical alligator. That alligator head mold has to be seen to be believed. Even the paint job is superb for a $15 toy. Some parts of Skullsmasher have this shiny, metallic finish that you only find in MP or 3P figures, and I commend Hasbro in this application. However, I mentioned that this is my least favorite of the 4 deluxe figs. Transformation and robot mode is where this figure falls apart, literally. Construction of the figure is beyond poor. Many joints are way too loose, and I guarantee you some limbs will fall off the first time you transform the figure. Holding action poses for Skullsmasher in robot mode is difficult if not impossible, due to the weak joints. Some glue or nail polish application in the ball joints should address this, but it’s not something I should have to do. Skullsmasher is recommend for hardcore G1 fans only.

Hasbro, IDW, Paramount, and whoever else is behind the Transformers have been super inconsistent with Sentinel Prime’s appearance. He’s a large and pinkish-red modern fire engine in the Movie-verse, a medium size blue pick-up truck in TF Animated, and (mostly) various shades of orange and yellow in different CHUG lines. Even when focused strictly on CHUG, it’s hard to pin down Sentinel’s appearance. And due to that reason, he’s the perfect character for a first lease of a new mold. Hasbro does this because hardcore fans like me would buy anything when it’s a new mold, then they repaint this mold with a more famous character later and I’ll buy it again (damn you Hasbro). In this case, TR Sentinel Prime is using a mold designed for Astrotrain, which they intend to release later. The body styling resembles Astrotrain, and he’s got a space shuttle alt mode and a train alt mode. All Hasbro had to do is repaint the mold and give the figure a new Titan Master for a different head design. Personally, I think this mold is not half bad. But it’s more appropriate to look at this mold in more detail when Astrotrain is released, so I’ll reserve final thoughts til then. But I will say this now… Sentinel Prime is way too orange. It kind of makes for a goofy looking Transformer.

Last in this TR lineup, but certainly not least… behold… Galvatron! Hasbro has not made that many direct G1 updates of Galvatron in the modern era. The only one I can think of is the deluxe Generations fig that was released in 2008, which was way too hard to transform to be any fun, and no Galvatron fig should be smaller than voyager class. Age of Extinction Galvatron doesn’t count as a real Galvatron. Combiner Wars had Galvatronus (formed with Cyclonus as the main body), but that’s not a standalone figure. So a real voyager sized, G1 inspired, and standalone Galvatron figure is a real treat! And Hasbro did not disappoint. TR Galvatron is the definitive CHUG Galvatron that we have been waiting for. The figure comes packaged in robot mode. This is hands down the most show accurate looking Galvatron produced to date (not counting 3P products). The figure in robot mode is well built and nicely proportioned. I don’t detect any construction issues, and he’s got enough articulation for some nice poses. He’s voyager size, so he scales well with other leaders of this size, such as Optimus and Cyclonus (quick sidebar: I hope Hasbro will one day make a CHUG voyager size Rodimus Prime, but that’s for another day). This Galvatron is both a Headmaster and a Triple Changer. I can see some G1 purists scoff at this change, but I personally don’t see it as a big deal. One alt mode of TR Galvatron is the futuristic Howitzer-like cannon first made famous in the G1 Movie, and the other alt mode is a jet with the huge orange cannon attached in the front. Both alt modes are pretty cool. The transformation mechanism is well designed and superbly implemented. Some parts in certain configurations could probably have been better tabbed in, but it’s a minor gripe. The Titan Master feature is ok. Hasbro chose a weird implementation where there is a helmet that flips out over Galvatron’s chest and it covers the head. I guess this was done so you can use any Titan Master figure with Galvatron. It looks ok, but I still wish he had a non-Headmaster head. I’m hoping that some third party will make a separate, G1 accurate head for TR Galvatron. I highly recommend this figure. Despite some minor negatives, it is the best official Galvatron figure made. Go out and get yours if you haven’t already.

Oh, I should mention that I also got Stripes this month. I found Stripes on the very last day of the month. Seriously, I took all the pics for the figures I got this month earlier, thinking I won’t find anymore. Then Stripes sneaks in on me on the last day! I think Stripes is a totally made up character. This mold is meant to be for Ravage, and the release of Stripes is just another quick cash grab for Hasbro (like Sentinel Prime before Astrotrain). I should have just left him on the shelf at Target, but the TF collector in me won’t let me. I’ll go more into Stripes when I do my purchase post for next month. I found the other 2 figures in the same wave as Stripes next month, so it makes more sense to mention him then.

Combiner Wars

By the middle of 2016, the number of CW figs have dwindled. TR is now in full swing, and that is now the active line considered to be CHUG, catered to mature, adult collectors of TF. Nevertheless, some CW figs are still out there. And here is one that I did not purchase during it’s initial release: Leader class Starscream.

I love Starscream. There is no other character like him in the entire TF universe. I try to get all Starscream figures produced in MP or CHUG form. I bought CW Leader class Starscream one day before I started my new job (on Hasbrotoyshop via eBay). This Starscream is an exact repaint of Leader Thundercracker that came before it. And for that reason, I won’t go into too much detail. I don’t like paying full price for something so similar, so I waited for a bit of a sale before committing to buy. But know that he does come with the bling-bling crown he wore during his gaudy coronation ceremony, shortly before being vaporized by Galvatron, in the 1986 movie.

Masterpiece

The lone MP figure this month is Ramjet. And I’ll get right to it… he’s disappointing. I wanted to like this figure, I really did. Hasbro and Takara have pumped out so many repaints of the 2nd generation MP seeker, and like an addict I bought all the US versions (including Thundercracker, Acid Storm, and Sunstorm). And I think that’s part of the problem… Hasbro/Takara has used this mold way too many times. I have been told that, when a mold gets used for manufacturing repeatedly, the later batches of figures comes out vastly inferior in quality to the early batches. I don’t exactly understand the specifics of why that is. But many industry insiders have assured me that this is a common problem. In the case of Ramjet, I understand that he’s reworked quite a bit off the standard MP Seekers. But most of it is still the same, and I’m betting this mold is getting seriously old and worn down that the end product is just one lousy mess.

The real problem with the figure is in the construction (probably from the bad mold I just described). It’s most evident in the robot mode. Most of the joints are way too loose, especially in the legs. The arms ain’t much better. Supposedly, this figure was already delayed because of serious issues with the shoulder joints. Takara recalled the figure from the retailers, and they went back to the factory to be repaired. I don’t know, in the end they’re still kinda bad. I would hate to see how this was before the repairs. In robot mode, this figure does not feel like a cohesive whole in the least. The overall design also don’t help matters. This mold was meant to be for the standard Seekers, and modifying it for Conehead Seekers feels like a tacked on design choice. The head transformation is bizarre. The jet nosecone kind of just hangs off the back of the robot mode, and there’s nowhere to plug it like the standard Seekers. Coneheads have their wings on their legs, and doing that in this mode, the robot mode looks too bulky below the waist. Combine that with the awful construction and you get one jumbled disarray of a figure. Takara took the cheap route and decided to rework an existing mold. They should have re-designed the Coneheads from the ground up.

I do like MP Ramjet’s alt mode. It looks show accurate. Some of the transforming mechanism is worthy of recognition. I like how the missiles cover over the guns. Some of the wing and thrusters additions are quite neat. Everything else is what you have seen before. Below are some pics of the alt mode, since this is the better mode.

With Classic Ramjet

MP Ramjet is not at all recommended. The nice alt mode is not enough to save it from the painfully crappy robot mode. And when I think that I paid $179.99, it really hurts. You may want to consider ToyWorld Combuster (or Jets) if you are in the market for a MP sized Ramjet.

To this day I still don’t have a 2nd generation MP Starscream. I missed out on MP-11 when it was first released, and I never found the TRU exclusive US version in store. But I got a MP-11 re-issue on pre-order. I sincerely hope that this re-issue will be better built. Though I have heard that the TRU version is horribly flawed in construction… so I’m keeping my fingers crossed.

Third Party

The first of two awesome 3P figures this month is ToyWorld Muddy, their homage to Sludge. Just like Iron Dreg last month, I also bought Muddy on sale, and he was shipped to me this month. Out of the 4 TW dinos that I now have, Muddy is my favorite. This may be because I never had a Sludge figure. But Muddy is genuinely impressive. The dino mode is fantastic. I love how he looks as a brontosaurus. In robot mode he looks cool too. I had reservations at first, because I thought having the dino front legs hiding in the wings in robot mode would look weird. But having the figure in hand, it really doesn’t look bad at all. And because of that design, the transformation from dino to robot works really well. He’s fun to pick up and play. The transformation is not difficult by any means, but at the same time complex enough for older collectors. One common gripe among fans is that his sword is too small. Yes that is a legitimate complaint, but seeing as how it’s made to compact itself into the neck in dino mode, I’m willing to give TW a pass. Having room to account for all accessories in every mode is always a plus in my book. Like I said already, I think Muddy is the best TW Dinobot out of the 4 that I have. Corelock (Grimlock) has an awesome T-Rex mode, but his robot mode leaves a bit to be desired. Roar (Snarl) is a good figure, but his tail keeps coming off during transformation. And as for Iron Dreg (Slag), it feels like TW didn’t update him enough for today’s standards. Muddy is the only one out of the four where I don’t detect any obvious weaknesses. I like both his modes, he’s well built, transformation is fun, and he’s a good modern update that will do Sludge proud. Muddy is a figure that belongs in your collection.

I reserved the best for last. My fellow TransFans… I am proud to give you (drum roll please)… Carry! Yeah, that name doesn’t do it for me either. But this figure takes 3P TF engineering to new levels. Carry is a homage to Rodimus Prime by DX9. I touched on this figure when I did my purchase post for June 2016 (pictured with Alpha Pack). Hasbro/Takara has given us only one Masterpiece Rodimus Prime figure (MP-09). That figure was met with mixed reactions from fans. Earlier in 2016 there was a MP release for Hot Rod. This figure is awesome, but it’s Hot Rod and not Rodimus Prime. So there is certainly room on my shelf for a 3P Rodimus Prime in MP scale. DX9 answered the call… and the result is amazing. Both modes are great representations of Rodimus in Prime form. He scales nicely with other MPs. Construction of the figure is nothing short of superb. And the transformation engineering of this figure is where DX9 Carry really shines. It is times like these that I wish I did video reviews, because writing about the transformation really does not do it justice. DX9 implemented some very clever mechanisms in the way that Carry converts from vehicle to robot and back. The process is smooth and fluid. The mechanics proceed logically from one step to the next. The transformation is complex yet intuitive. There are lots of steps in the process, but you really don’t feel stuck at any one time in the overall paradigm. He’s a great figure to just pick up and play, and at the same time there’s enough going on that this figure easily classifies as MP. And unlike MP Rodimus Prime, Carry is able to transform from robot to truck without external attachments. The entire truck is wholly contained within the figure. And what’s more amazing is the size differential between robot and alt mode. Carry in alt mode is only about voyager size, but in robot mode he is fully MP size. Some fans have complained that he’s too small in alt mode, but I see this more as testament to the great engineering of the figure. Another minor nitpick from some fans is how his wings appear in robot mode. Personally it doesn’t bother me. Carry comes with a Targetmaster figure. This fig is ok, but in gun mode he can be too heavy for Carry to hold properly. I don’t think of Rodimus Prime as a Targetmaster anyway, so I usually have Carry use some other weapon. The rifle from CW Silverbolt is a good substitute. I got Carry on sale at $129.99, but even at the full retail of $169.99, he’s worth every penny. I give Carry the highest possible recommendations.

Arise, Rodimus Prime

Since there are so many TFs this month, I thought it would be fun to take some group pics. Check them out below! (And like I mentioned already above, no pics of Stripes. He’s coming next month… promise.)

The Autobots:

The Decepticons:

Titans have returned! Transform and Roll Out!

 

My fellow TransFans, June of 2016 is a historic month! For the first time in the history of this blog, I have acquired more 3rd party items than official Takara/Hasbro items! I think something like this phenomenon was brewing for a long time now. And it finally happened. I’ll comment more on this later, but for now let’s take a look at the figs for the month.

• Combiner Wars Groove, bbts.com, $24.99

• ToyWorld Iron Dreg, bbts.com, $91.99

• Fans Toys Grenadier, bbts.com, $82.99

• Spark Toys Alpha Pack, gift

• Warbotron Heavy Noisy, gift

First let’s look at the lone offical Hasbro purchase and get that out of the way. Combiner Wars deluxe Protectobot Groove is a shared exclusive between Amazon and some of the bigger online TF retailers. This figure is not to be confused with the legend size Groove released in 2015, which is available in mass retail. I have wrote about this before, and it’s worth stating again. For the Protectobots, Hasbro gave us deluxe Rook instead of deluxe Groove. I can only guess that this is a cheap ploy to sell more figures. Those of us that are hardcore G1 had to buy deluxe Groove the hard way. Boo Hasbro.

Deluxe Groove on its own is not a bad figure. Both modes look solid, and at first glance there’s not much to complain about. I’m fairly certain he’s a new unique mold, but he feels awfully similar to the other CW limb components. The toy itself feels quite cheap, but all CW deluxe figs share that flaw. The only real reason to get this fig is for hardcore G1-ers to complete the Protectobots with the right characters in the right scale. Below is a pic of CW Defensor formed in the proper G1 configuration.

Now onto the good stuff. First on the agenda is ToyWorld Iron Dreg, their tribute to Dinobot Slag. I believe this figure was bought back in the March of 2016. At the time, I already had Roar (Snarl) and Corelock (Grimlock), and I was so thoroughly impressed with those two that I vowed to complete the TW Dino set. So when I saw Iron Dreg at a discount in March, its purchase was a no-brainer. He wasn’t shipped and received til this month, because I wanted to ship the stack out along with Grenadier and Groove.

As of this writing now in February of 2017, I have 4 of these Dinos, the only missing one being Spear (Swoop). Though I gotta say, out of these 4, Iron Dreg is the weakest figure. I love the dino mode. It is a good modern update of Slag as a powerful metallic triceratops. The transformation and robot mode is where this figure falls a bit short in my opinion. The overall transformation schema is very close to how Slag transformed in the G1 toy. The only noticeable difference is having the rear dino legs fold inside into the lower legs in robot mode, a common motif among all modern interpretations of Dinobots. There are other minor differences, but nothing that really sticks out as a significant mechanical enhancement to the figure. Hardcore G1-ers would probably appreciate this close resemblance to what came before and see this as a plus. Normally I would wholeheartedly agree, but in the case of Iron Dreg, I feel there’s not enough updated from the G1 toy. As a CHUG update, I feel like a modern figure needs to move the toy forward in terms of engineering. It’s one thing to update aesthetics (something that fans passionately debate over), but it’s quite another to update mechanics. Everything feels too familiar. Don’t get me wrong, Iron Dreg is still a decent update of how Slag would be today. But when compared to ToyWorld’s efforts on Corelock, Roar, and Muddy (Sludge), Iron Dreg feels lazy. I guess it’s no accident that Iron Dreg was the 2nd to the last figure released in this team of 5. While we’re on that note, Spear is the last TW Dinobot released. I have read reviews that Spear is not that great of a figure, so I am debating if I want to spend around $100 to buy a bad figure, just to complete the set. First world problems – woe is me 🙁

As for Iron Dreg’s robot mode, I got the same gripe as its engineering – it feels too similar to G1. Again, Iron Dreg is still leaps and bounds superior to the G1 figure. It’s just that there’s nothing that wows me about this robot mode. All the updates that you expect to be there is there, but that’s all. TW most definitely did not go above and beyond with Iron Dreg, and the result feels like a minimally done update to Slag by 2016 standards.

I know I sound really harsh here, but I still recommend Iron Dreg if your aim is to complete the TW Dinobot set. As part of a team, he is solid enough of a figure that he warrants a purchase to occupy a space on your shelf. But as a standalone figure, I would say pass. There are other Dinos from TW that are way better. If you only wanted to get one Dinobot, you would probably get Grimlock anyway. Below is a pic of Iron Dreg in robot form.

Here is a link to the 4 TW Dinos I have thus far, in their dino modes. I love how the team looks together.

Let’s now take a look at a character that’s very dear to me: Bombshell. I have outlined how Bombshell is my very first official Transformer. And for that reason, I try to buy all the modern updates to the character. I have one set of G1 reissues, the FansProject update (as Stormbomb), and the recent Combiner Wars legend figure. I even have Hardshell, a spiritual update of the character in the TF Prime Beast Hunters line.

By the middle of 2016, many third parties have attempted MP interpretations of everyone’s favorite robotic insect pests. I read and watched some reviews, and the general consensus is that Fans Toys make the best MP Insecticons. And since Bombshell is my favorite of the 3, I bought Fans Toys Grenadier. I know many fans prefer the grey chest toon version of this figure. But I elected for the toy version with the purple chest, because that’s how the G1 toy was. I played with this figure over and over as a kid, and transformed him countless number of times that today this figure is in fairly poor condition. The G1 figure had a purple chest, and that’s what I remember, so I went for purple in Grenadier. And honestly, I didn’t even notice that Bombshell had a grey chest in the cartoon until very recently, when third parties started doing their MP Insecticons.

FT Grenadier comes packaged in robot mode. The first thing that you will notice about this figure upon taking it out of the box is that it’s got some decent heft to it! Seriously, Grenadier weighs more than most figures I own, and that’s saying a lot! Below is a pic. This figure is a wonderful representation of Bombshell in MP scale.

FT was smart enough to mold a design on Grenadier’s chest that’s a perfect fit for third party Decepticon stickers. Notice on my Grenadier I have a faction symbol on his chest, using stickers by Ocean Designs that I bought sometime in 2015. I love the look of Grenadier in robot mode. Appearance wise, he’s a perfect homage to Bombshell, and in my opinion he strikes the perfect balance between how he appears in the cartoon and how he should appear as a toy figure. He scales nicely with other MPs on the shelf. Grenadier has got some decent articulation, capable of some dynamic poses if you want to re-enact scenes of Bombshell in action.

Transformation to bug mode can be a mediocre challenge, but not for the reasons you think. As a rule, I think transforming plastic pieces is usually easier than transforming metal pieces. Transforming Grenadier, it feels like the whole figure is metal. I know that’s not true, but the figure has a fair amount of die-cast, and the plastic used is super high quality. While I applaud the materials used, transforming the figure becomes difficult. There’s very little wiggle room for error when such hard pieces on the figure are used, and thus the process becomes unforgiving. The tight joints also do not lend to an easy transformation process. However, all this is balanced out by the transformation mechanism being on the simple side, resulting in a figure of average difficulty on the challenge scale. In a nut shell, not a whole lot of steps in the transformation, and it’s obvious what the next steps should be. But performing the steps could take some work.

In beetle mode, Grenadier does not disappoint. He’s got the same weighty feel and robust construction that he has in robot mode. The appearance of the bug is tremendously faithful to his show likeness. Fans Toys even included a set of alternate legs for the bug mode. I’m not sure what they are for entirely. It’s possible that, in some episodes, Bombshell had legs that looked more like the alternate legs. I should have took a pic of Grenadier alone in beetle mode. Scroll down to the bottom of this post of Grenadier in alt mode in a group shot.

I highly recommend Grenadier. Here is a pic of Grenadier in robot mode with some of his Decepticon cohorts.

The next two figures are gifts from my wife. I have wishlists set up on my favorite TF retail sites, and she just looks at these when she buys me TFs as gifts. It’s always kind of a surprise which figs she would choose.

The first of these is from a new company called Spark Toys. They decided to do their take on a War Within Optimus Prime. Back in 2006, when it was only 2 years after I started collecting TFs again, Hasbro partnered with Galoob to release the Titanium line. The very first figure released in this line is a War Within Optimus Prime. In all fairness, that figure wasn’t bad. I liked both modes of that figure. The transformation, while simple, captured how a Optimus Prime figure should transform. The paint applications of the figure was solid. Where that figure fell apart is in the construction. The selling feature of the Titanium line is that they include die-cast parts. But they say die-cast construction is a lost art, and in the case of Titanium figures, it’s very true. Titanium OP had some of the worst joints imaginable in a TF. They could not support the weight of the die-cast pieces. The result is a figure that can’t hold any kind of pose, and picking up the figure yields a floppy mess of a Transformer.

Well, that was then. 10 years later in 2016, Spark Toys makes their attempt to do justice to War Within Optimus Prime, in MP scale no less. And since they are third party, the name they are calling OP is Alpha Pack. I’m glad to report that Spark Toys’ efforts is a success! The first thing you will notice about getting this guy out of the box is the spectacular paint job! I think of all the TFs that I have acquired, this guy may have the best paint job ever. The reds, blues, and silvers have this shiny and glossy metallic property to its appearance, and it’s great to see that the application is uniform across the figure. Front head lights and rear tail lights are all accented in bright yellow paint. The tires a made of rubber, and in vehicle mode, Alpha Pack rolls well on a flat surface.

Alpha Pack comes with 3 accessories: the famous OP rifle, an axe (not the energon variety), and their take on the Autobot Matrix of Leadership. In alt mode, Alpha Pack can carry the rifle in the top rear area of the truck. To do this, there is a nice little attachment handle that flips out of the rifle, and this can be hidden when Alpha Pack is using the rifle in robot mode. Very very cool. The Matrix can be comfortably stored in the front grill area (which becomes the chest in robot mode). But there is no room for the axe in alt mode.

Below are some pics of the alt mode of Alpha Pack. I love the look of Alpha Pack in this mode – he looks like he jumped straight out of the comics. I applied an Ocean Designs decal to him as well.

Below is a pic of Alpha Pack next to the awesome DX9 Carry (which I will go into next month).

Transformation to robot mode is not difficult at all. I’m going by all memory here, but in terms of the transformation paradigm and overall number of steps, it feels like the Alpha Pack is only slightly upgraded from the Titanium figure. The mechanics of how that’s achieved, however, is a vast improvement. Alpha Pack does not have any die-cast pieces as far as I can tell, but in opinion that’s a good thing. It makes for a more playable figure. And as far as transformation and poseability, not having die-cast poses less issues in these areas. Alpha Pack has nice joints to support the figure, but not having die-cast means it doesn’t need extra joint reinforcement to begin with.

Alpha Pack looks great in robot mode. The figure feels true to his War Within appearance. Look at the top banner of this blog for a pic of War Within OP if you are not familiar with that incarnation. The outstanding paint job shines in this mode as well. Some fans have mentioned that he looks a tad too bulky in robot mode. When standing next to MP-10, it’s hard to argue against that complaint. But personally, I kind of dig this bulky look. This is how a lot of the comic book artists choose to stylize Optimus Prime in his Cybertron days, and I am glad to see Spark Toys hold true to this design. Below is a pic of Alpha Pack next to the US Version of MP-10.

One gripe I have about Alpha Pack is the poseability. Because he is a bit on the bulky side, his range of poses are more limited. This is something to note if you are one of those collectors that love to display your figures in dynamic poses. But despite this weakness, I still highly recommend Alpha Pack. This figure has way more pluses than minuses, and if you are a fan of War Within or any of the modern G1 Transformer origin stories of their era prior to Earth, you should pick up this figure.

The other figure that I got as a gift from my wife this month is Heavy Noisy, which is Warbotron’s rendition of Brawl. This is the 2nd time that my wife has chosen to get me something from the Warbotron Combaticons (the first being Whirlwind, or Vortex). My wife knows nothing about Transformers. She picks out the figures on my wishlist based on appearance alone. She has always joked that she identifies more with the Decepticons, so perhaps she knows more than she’s letting on.

Heavy Noisy is the 4th figure I have in the Warbotron Combaticon line. I gotta say though, this one feels like the weakest out of the four so far. He’s still a decent figure, but something about him just don’t feel quite up to par with the other team members. Both modes are satisfactory. Transforming the arms into tank mode is a bit of a pain because they are so tight, and it’s even worse when you try to get them back to robot mode. I’m also not thrilled about the tank turret becoming a shield. It feels too much like puzzle forming in my book. But Heavy Noisy is not a bad figure by any means. He is solid enough to earn a place in your collection, and you still need him to form Bruticus. I’ll reserve my final thoughts for when I have all 5 members of Warbotron. As of this writing, I have purchased Air Burst (Blast Off). I should have him in hand soon.

Below I have a pic of all the 3rd party figures acquired this month in a group shot.

It’s quite a sight to see how far 3rd party products have come. I still remember my very first 3rd party figure, which was Defender by FansProject. Third parties have really stepped up their game since then. Most of the figures produced recently seem to be in really high quality. They rival anything that Hasbro/Takara has produced in the MP line, and blows away anything that you would find in retail store shelves. Third party products are not getting any cheaper, though. So many companies are getting into this game that I can’t count them anymore. Very often, multiple companies will produce their version of a particular character. As fans, I am glad I have so many options on something that Hasbro will not produce, but I also feel handicapped by all these options. Many studies have been done on the paradox of choice; that too many options can actually make a person unhappy. As for third party TFs, is too much of it presented to the buyer that decision paralysis is now an issue? I was gonna sum up my thoughts on this topic in a short paragraph here, but now I think this may deserve it’s own post.

June 2016 was a great month. So many great figures, by so many different companies. More to come soon… Transform and Roll Out.

Since I started tracking my purchases on this blog, October has provided no shortage of TF action in either figure count and/or spending. October 2012 holds the record for highest TF count in a single calendar month (at 24 figures), and October 2014 holds the record for most TF spending in a single calendar month (at $885.90.. yikes!).

In true October fashion, this month is also filled with TF purchases that are way above my average monthly tally. I don’t think October 2015 sets any new personal records, but there are a lot of figures here nonetheless.

• Combiner Wars Ultra Magnus and Minimus Ambus, amazon.com, $40

• Combiner Wars Ironhide, Target, $14.99

• Combiner Wars Prowl, Target, $14.99

• Combiner Wars Sunstreaker, Target, $14.99

• Combiner Wars Mirage, Target, $14.99

• Combiner Wars Cyclonus, amazon.com, $17.89

• Masterpiece Bumble G-2 Ver., hlj.com, $36.47

• Perfect Effect Perfect Combiner PC-05 Upgrade Set, tfsource.com, $32.99

• Before & After Omega Launcher for MP-17 Prowl, tfsource.com, $14.95

• ToyWorld Devil Star, tfsource.com, $119.99

• Warbotron Sly Strike, tfsource.com, $75.99

• Fans Toys Sever, tfsource.com, $179.95

Let’s start with Combiner Wars Ultra Magnus. This is hands down my favorite Ultra Magnus figure of all time! That’s a strong statement, considering I own almost all of them. I like this figure even better than Masterpiece UM, because the CW fig is less blocky and more playable. I have gone into details about this figure back in the post, so I won’t do it again. Minimus Ambus is a character I know nothing about. I believe he’s from the IDW-verse of comics, but I could be totally wrong here. The Minimus Ambus figure in this package is completely forgettable and adds nothing to the Ultra Magnus toy.

Below is pic of my two favorite Ultra Magnus figs of all time.

Combiner Wars continue with more figures that are very minor reworks of what’s already out there. In this month we get Ironhide, Prowl, Sunstreaker and Mirage. Hasbro really knows how to milk us hardcore G1 fans by tweaking existing molds very slightly and then releasing them as popular G1 characters. I probably could have skipped this foursome altogether, but I’m a total sucker for G1 characters from the first 2 seasons. And I needed figures that would make sense to combine with CW Optimus. Ironhide, Sunstreaker, and Mirage are reworks of existing Stunticons (Offroad, Breakdown, and Drag Strip, respectively). Prowl is a rework of Streetwise. I won’t go into detail since the rework here is so minor that we may as well just call them repaints.

Cyclonus is yet another rework in the CW line. But this is one rework that feels truly like a rework, and not a repaint with different colors and a different head. A rework of CW Silverbolt, I really dig this Cyclonus figure. He looks absolutely fabulous in the stunning purple paint. Robot mode is nicely proportioned, and the jet mode looks fast and sleek. In addition to the different head mold, Cyclonus offers different wing molds and different nosecone mode in jet mode. And of all the CW body figures, the Silverbolt/Cyclonus mold offers the best combining mechanism, in both function and appearance. The combined head mold is also different, as it is a good representation of Galvatron and not Superion. It’s too bad Cyclonus’s weapon is an exact repaint of the Silverbolt’s weapon, but in this case that’s a minor nitpick. I highly recommend Cyclonus. There are enough difference here from Silverbolt that it feels like you are buying a brand new figure.

Galvatronus is the name of the combined form when Cyclonus is the body. Supposedly CW Cyclonus has the power to mind control other limb components and have them merge with him. That’s kind of a hokey backstory, but whatever. I wish they made Scourge and Sweeps as limb components to form Galvatronus, which makes way more sense. That’s actually a pretty awesome combination now that I think about it. Maybe some TF modder out there has done this already. Anyways, below is a pic of Galvatronus using the 4 CW limb Autobots acquired this month.

The only official Masterpice figure this month is G-2 Ver Bumble. I already stated many, many times about how I love MP G1 Bumblebee. The G2 Ver of the figure is the exact same mold, except he’s covered with shiny gold paint that I initially thought this would be Goldbug. And instead of the Spike figure, we get a second face plate that more resembles the original G1 toy, and a nice rocket pack that we have seen Sideswipe or Optimus use (it’s unclear to me if Bumblebee ever used the rocket pack). If you already have the first MP Bumble, then it’s not necessary to get this figure. But I did anyway, because I love this mold, the new shiny paint job, and all the extra accessories.

Perfect Effect Perfect Combiner PC-05 Upgrade Set and Before & After Omega Launcher for MP-17 Prowl are two upgrade kits that are similar to the upgrade sets that I bought back in June of this year. Specifically, they are repaints of Perfect Combiner PC-02 and Alpha Launcher for MP-18, respectively. Perfect Combiner PC-05 is meant to be used with Combiner Wars Superion, but technically you can use them with any of the CW figs in combined form. Omega Launcher are non-firing shoulder missile enhancements for MP Prowl. Again, they are exact repaints of what came before, so I won’t go into them too much. Actually, I have not even had the chance to put Omega Launcher on Prowl. But in theory it should look just as awesome as Alpha Launcher on Bluestreak.

Devil Star is ToyWorld’s interpretation of Astrotrain. I love ToyWorld, and I love Astrotrain, which is why I pre-ordered this figure as soon as I learned that they are doing a G1 cartoon accurate version (TW had another version of this figure prior to this called Evila Star, with colors that are more similar to the original Takara toy). I have so much faith in ToyWorld that I knew they would do Triple Changers justice. However, I later watched some reviews of Devil Star (and Evila Star), and learned that this guy is an absolute pain to transform. He’s very much a panel former, which doesn’t bother me that much. But it’s excruciatingly unpleasant to get all the panels to line up in both alt modes. I wanted to cancel the pre-order as soon as I found out, but I was a little too late on the trigger and the pre-order came in before I knew it. So now I have it stuck in my possession. To this day, the figure is brand new, never opened. And I don’t plan to. Maybe one day he will be worth big bucks and I’ll resell it. Devil Star is a limited edition figure. In the pic above, the big box is the figure itself, but the little box on top are these exclusive train tracks that are produced in very limited quantities. I am looking to sell the figure. If you’re reading this and want to make me an offer, contact me.

It took some time, but it finally happened… I got a figure from Warbotron! I wrote about Warbotron more than 2 years ago before this month, and I’m ashamed to say that it took a sale for me to finally buy something from them. My buddy Gemini has the entire Warbotron Combaticon set, and he thinks Sly Strike (aka Swindle) is the best of the bunch. So I have been eyeing Sly Strike for quite some time now. I almost bought the figure at regular price, and I’m glad I didn’t when I saw that TFSource was selling them at $14 off from MSRP. I wasted no time getting one. Gemini did not let me down – Sly Strike is awesome! He comes packaged in robot mode. The body stylings is modeled more after the G1 toy and not the show, but body proportions is definitely updated to modern standards (old G1 body proportions would be awful). His face and head mold looks like it jumped straight out of the G1 cartoon, as its got the famous purple eyes and that discriminant black-market salesman grin that only Swindle can possess. Chest area has a similar purple molding like the G1 toy, though fans have come up with an alternate configuration for the robot mode where the jeep hood area can form over the chest for a more Binaltech/Alternator appearance. The figure is also designed so the wheels over the shoulders and the back area can be transformed differently to suit your taste. Warbotron took more liberties with the alt mode, and in my opinion that’s not necessarily a bad thing. In G1, Swindle transforms into a FMC XR311 combat support vehicle. Munitioner by FansProject uses a military Humvee as the alt mode. Warbotron decided to use a Jeep type vehicle, like the Jeep Wrangler Commando. Some fans may complain this is not G1 enough, but I think it’s a good modern update. The detail, colors, and moldings of the alt mode is terrific as well. Transformation of the figure is fairly straightforward. It’s not overly complicated, but at the same time complex enough to satisfy collectors of 3rd party items. Construction wise, Sly Strike does suffer from some slight tolerance issues, but nothing so glaringly bad that it would distract from the enjoyment of the figure. As for his weapons, the hand held pistol is almost an exact replica of G1, updated to MP scale and modern detail standards. Warbotron took more liberties with the cannon and gave it a translucent pink barrel, and personally I think it’s a nice touch. All in all I highly recommend Sly Strike as the MP scale figure for Swindle. I thought I got a good price for Sly Strike at $75.99, but TFSource has been clearing them out at $66.99 for the past few months! Get them while they last!

Last but certainly not least, we have Sever, Fans Toys’ interpretation of Snarl in MP scale. Sever is the 2nd figure that I got in the Fans Toys line of MP Dinobots. The first one was Scoria (aka Slag). FT released Soar (aka Swoop) in between Scoria and Sever, but I didn’t have a chance to buy that one. Scoria is generally considered a good figure, but he’s not without his faults. He’s got the now famous loose shoulder issues that many fans complain about. Surprisingly, mine is fine in the shoulders (I did buy the repair parts for $4 just in case). However, my Scoria is quite loose in the hips. If I pick up Scoria, the legs would definitely droop down at the crotch, and he won’t be able to hold any cool poses. Part if this is because there’s so much weight in the legs. Other fans have complained about some other minor construction issues. Overall I like Scoria, but he was not the perfect MP dino that I thought he would be, because of the loose hips. So when Sever came out, I was a little nervous that he would also share similar issues. But I chose to buy him anyway, because of the $20 early bird discount. I am happy to report that Sever is absolutely perfect! I detect no construction issues whatsoever. All joints are just the right amount of tightness. Some fans complain the joints are too tight, but I think they’re fine. He can hold some terrific poses, and the figure has enough articulation to take full advantage of the solid construction. In both mode, Sever looks like he jumped straight out of the G1 show. Transformation is also superb. He’s not terribly difficult to transform, but at the same time there’s enough going on in the mechanics that hardcore collectors of this line would not find him too simple. The details on this figure would satisfy even the most picky. The weapons for Sever are awesome as well. They both have light up LED capabilities, though batteries are not included. Check the LED operation of the weapons as soon as you get Sever, as I heard some fans complain about them not working. And if I have to make one small nitpick, it’s that there’s no place for the weapons in Dino mode. But that aside, it really feels like Fans Toys is taking all their lessons learned with Scoria, and they have implemented them in Sever. (They may have done that with Soar as well, as I have heard nothing but praises.) This is 3rd party MP Dinobot at it’s best. To this day I still have Sever out for display, because I like him that much. I highly, highly recommend Sever. Fans Toys have fully restored my faith in their line of MP Dinos. I am now looking forward to getting both Soar and Stomp (aka Sludge), the latter of which came out after Sever.

That ended up being a way longer post than I meant for it to be. October of 2015 had 12 purchases, for a total of 11 figures and 2 upgrade sets. This is the last month in 2015 with a high number of purchases. This month was also a lot of repaints. By my count, only 4 purchases are not repaints or reworks. Even the 2 upgrade sets are repaints. Sometimes I buy TFs purely based on if I like the character; I think in the future I need to be more mold conscious. I am very happy about Sly Strike and Sever, two of the more expensive purchases this month. A bit regretful that I should have cancelled Devil Star when I had the chance.

Til next time… Transform and Roll Out.