A very modest number of TFs were acquired in September of 2017. And none of them were Decepticons. Autobots, roll!

• Titans Return Hot Rod, amazon.com, $9.99

• The Last Knight Drift, Walmart, $15.83

• The Last Knight Bumblebee, Walmart, $15.83

Hot Rod

TR Hot Rod was already first acquired back in Dec of 2016. So why did I buy this a second time? In the post for Dec 2016, I mentioned that I broke off the head connection mechanism while removing Firedrive from Hot Rod on the very first transformation attempt. Read that post for all the details and for my thoughts on the figure. But suffice it to say I don’t like having broken Transformers in my collection. And at less than $10, I felt justified in getting another Hot Rod. He is the star of the G1 Movie, after all. I took care not to break the connection mechanism this time.

The packaging arrived in less than perfect condition, as you can clearly see in the above pic. I would definitely file a complaint with Amazon if my intention was to keep this figure mint on the card. But I planned to open this, and at less than $10, it’s not really worth my time.

Drift

The Last Knight figures continue with Drift. AoE gave us a very good Deluxe class Drift, one of my few favorites from that line. So how does TLK Drift fare? Overall, he’s not bad. In robot mode, he’s got decent articulation and his proportions are well balanced. The iconic twin swords are on full display here. This Drift is colored mostly red in robot mode, and that’s quite a departure from the blue AoE Drift.

TLK Drift in an action pose.

Close up shot. Pretty good face sculpt. Drift has got the full samurai motif going on, from the samurai face plate to the samurai shoulder pads. Notice the Mercedes logo on the center of the chest. Drift is luxury class samurai… no ghetto swordsman here.

Backview of TLK Drift. Notice he has twin shorter swords, stored on his back over the shoulders. So this guy comes with a total of 4 blades. Very, very cool.

In TLK, Drift transforms into a Mercedes, while in AoE he was a Bugatti. Transformation to car mode is completely different from AoE. In AoE, the front of the vehicle transforms into the chest, while in TLK it transforms into the feet. I won’t describe the rest of it too much since the transformation is not that complicated and not terribly original.

In alt mode, he’s mostly black, with just a touch of red on the very bottom of the vehicle. He looks good as a Mercedes, though I still prefer it if he was a Bugatti. Below is a shot of TLK and AoE Drift side by side.

All in all, I like this Drift. I think AoE Drift is still better, but TLK Drift has got some nice features going on too. Recommended.

Bumblebee

We really don’t need any more Movie-verse Bumblebees. But I suppose the execs at Hasbro just love pumping out more of the one Transformer character that even the most casual of fans can identify by name. This is the second Deluxe class Bumblebee figure in the TLK line. I passed on buying the first one, which was just a repaint of AoE Deluxe class Bumblebee. This second one is a brand new mold.

Word has it that this new TLK Bumblebee is a mass retail toy representation of Masterpiece Movie Bumblebee (MPM-3). I can neither confirm nor deny that assertion, since I don’t have MPM-3. And I’m not gonna pay about $100 to find out. From what I know, the overall transformation schema is the same. But TLK Bee is obviously smaller. I will also guess that the materials used are cheaper and the mechanical complexity is toned down.

In robot mode, TLK Bee looks good. I like the details on the figure. Compared to previous deluxe Movie Bumblebees, TLK Bee appears more show accurate.

TLK Bee is capable of some fairly dynamic poses since he’s pretty well articulated. He comes with a gun-arm accessory, which he uses in the shot below. This can be used on either arm. However, the arm does need to be removed to attach the gun-arm.

I should point out that the construction of TLK Bumblebee is not the best. The feet pieces are quite loose. The hip joints are a bit loose too. The result is that it’s difficult to stand the figure. While TLK Bee is capable of a wide range of poses, he cannot hold it because of the weak construction.

Close up shot of TLK Bee. The face sculpt is quite good, and I like that the eyes are painted blue. I believe the Autobot logo on the forehead is painted on. In this pic below it looks a bit sloppy since it’s totally magnified, but under the naked eye it actually looks quite good. I commend Hasbro for including this bit of detail.

Transformation to alt mode is a completely new design. Like I said, I don’t know how much of this is borrowed from MPM-3, but for a deluxe class mass retail toy it’s definitely cool. From a engineering perspective, I rate this deluxe Bumblebee second among all the deluxe Movie Bumblebees. And if you’re wondering who gets first honors, it’s Battle Blade Bumblebee from Revenge of the Fallen, Hunt for the Decepticons subline.

In alt mode, TLK Bee has black coloring painted over the hood and roof. All the Movie deluxe Bumblebees has been pretty good in alt mode, and TLK Bee is no exception.

The gun-arm accessory can be attached in alt mode, but it looks quite silly.

Underside of the vehicle.

All in all, this Bumblebee is good, but just short of great. I would give it much higher recommendation if the build and construction had no issues. But as is, I would still get it. It’s without a doubt one of the better deluxe Bumblebees made. I don’t think you would be missing out on too much if you passed on this, especially if you already have too many Movie Bumblebees taking up precious shelf space. But I would definitely get this Bee over many others that have been made in the Movie-verse.

Here is a pic of Drift, Bumblebee, and Hound, all from The Last Knight.

Autobots, Transform and Roll Out!

 

I have previously reviewed these awesome faction rub on decals for your Transformers. Today I’m gonna show off some more pictures of them being used on my 3rd party and 4th party transforming figures.

Kubianbao MP-10V Optimus Prime – white backing
 

Mech Planet Hot Soldiers Bumblebee – clear backing
 

Fans Toys Mercenary – clear backing
 

Transform and Roll Out.
 

There was no shortage of purchases in April of 2017. Figures from every TF line of the time was represented this month, including Titans Return, Robots in Disguise, and for the first time, The Last Knight. Even third party products were not left out. Some of these figures are pretty darn good. And some of them, not so much. If you just want to get to my final thoughts about a figure, scroll down to the bottom of the post.

There’s a lot to get through, so let’s get to it.

• Robots in Disguise Soundwave, Walmart, $14.97

• Robots in Disguise Blurr, Walmart, $14.97

• The Last Knight Barricade, Walmart, $15.83

• Titans Return Broadside, Target, $24.99

• Titans Return Sky Shadow, Target, $40.99

• Titans Return Bumblebee, Kickback, Gnaw, tfsource.com, $32.99

• Keiths Fantasy Club E-Nergeon Cubes, tfsource.com, $9.99

• FansProject Function-XV MADLAW, tfsource.com, $39.99

• Warbotron WB03-A Turbo Ejector, tfsource.com, $79.99

Soundwave and Blurr

The two Robots in Disguise figures this month are Soundwave and Blurr. I found these two very early in the month.

I could never get enough Soundwave figures. I love the character, and I’m pleased he has a figure in the RiD line (though I don’t watch the show so I don’t know if he makes an appearance). RiD Soundwave takes design cues from many previous incarnations of the character. In robot mode, he’s got the iconic Soundwave colors and right-shoulder mounted cannon. Overall body shape takes design aesthetics from War For Cybertron Soundwave, and the head mold is an obvious homage of Transformers Prime Soundwave. I dig Soundwave’s overall appearance in robot mode. The red featureless face is a good fit for the character, and works well as a light piping feature. The figure is capable of some good poses in robot form, though most of it is achieved through cheap plastic ball joints. Transformation of RiD Soundwave is not difficult by any means. But unless you do it all time, there are some minor twists to an overall familiar motif that could have you very slightly stumped during the process. I don’t transform the figure that much, and every time I do it, I find myself asking silently, “How do I do that again?” RiD Soundwave’s alt mode is most certainly taken from War For Cybertron. But that’s not a bad thing. The Cybertronian car/SUV works well for the character. In my opinion, there are not that many good figures from Robots in Disguise, but Soundwave is one of them. This is a recommended figure. Get it.

Let’s look at Blurr next. The figure features the iconic Blurr colors that we have grown accustomed to. His head mold is an unique take on Blurr. It looks like he’s wearing a helmet with a visor, something Blurr would use if he was a human race car driver. I dunno, I think it’s design gimmicks like these that turns me off on Robots in Disguise. The show heavily attempts to humanize every Transformer, and I think they’re forgetting that they’re robots, not humans. Blurr is super easy to transform, just like every other figure in the RiD line. His transformation motif features nothing that we haven’t seen before. Arms to the sides, snap the legs together, and fold the back assembly over to the top of the vehicle. Flip in the feet pieces and line up the spoilers. That pretty much describes the entire transformation. It’s painfully simple, even by RiD standards. Granted, the alt mode does look cool. This futuristic race car reminds of me Crasher from the GoBots. I bet a customizer has already made a Crasher using this figure. Blurr’s weapon is in a translucent blue, and it comes with 2 pegs so you can position the weapon in two different orientations. All in all, this is not a bad figure, but offers nothing new for the mature collector.

Barricade

I am pleased to introduce my very first figure from The Last Knight: Barricade. There has been many deluxe movie Barricades made, and none of them are that good. I have the very first Barricade, from the 1st movie, as part of “First Encounter” 2 pack. And I have deluxe Barricade from Dark of the Moon. DotM Barricade is slightly better than the first Barricade, but neither one set the world on fire.

Hasbro used the term “Premier Edition” to label TLK toys that are more geared towards collectors, kind of like how Age of Extinction used the “Generations” banner. I started seeing the Premier Edition figs at Walmart in early April. Right away I liked the packaging. Even for the deluxe size figs, they are packed in boxes and not on cardboard. That’s always a plus in my book. In addition to Barricade, there was Bumblebee, Berserker, and Slash in the first wave of Premier Edition deluxe figs. I’m pretty sure Bumblebee and Slash are repaints from AoE. Berserker didn’t look all that interesting. That only leaves Barricade. Out of these 4, he does look the best in the box. And since I was never satisfied with the previous Barricades, I was really hoping this figure would be better. So I left the store with only Barricade.

I’m gonna go over the alt mode first. Barricade’s police car paint job is quite good. This Barricade is more of a dark blue, and not black. The Decepticon logo and the “POLICE” markings are painted very sharply on both sides. Front headlights and the police siren lights on the grill are also nicely painted. Same goes for the rear brake lights. This Barricade still has the phrase “To Punish and Enslave” written in cursive right above the rear wheels, and this application looks better than ever. What I find most impressive about this alt mode is that it’s got room for all his accessories. There are peg holes for the pistol and the night stick underneath the vehicle. And with those attached, there is still plenty of clearance for the police car to roll well on a flat surface. But what’s really impressive is how the arm cannon is placed in alt mode. The round arm cannon fold apart to form 2 semi-circles, and in this form the cannon is pegged in on the rear windshield. It’s a very cool effect and I commend Hasbro for this design. Barricade feels cohesive in this mode, nothing dangling or flopping around. If I was only judging this by alt mode, this is the best Barricade ever made.

Transformation to robot mode is pretty simple. That seems to be the trend for movie figures these days, even the ones made for collectors. It’s nothing we haven’t seen from the movie line, so I won’t describe it too much. In robot mode, Barricade looks ok, not great. I feel that his proportions are off. The legs appear a bit short in my opinion, giving more of a stocky look. The big weakness of the robot mode is that there is way too much back kibble. The roof of the car is draped over almost the entire back side. In fact, the roof of the car accounts for about 70% of the height in robot mode. It’s not AoE Crosshairs bad, but pretty close. Articulation is decent for a fig in this class, though I gotta point out there is no waist articulation and the head only moves from side to side, not up and down. The pistol and nightstick can be held in either hand. The same peg holes for their storage in alt mode is now positioned to the side of the thighs, so he can store them there in bot mode for kind of a cool look. The arm cannon can be wrapped around either arm. In my opinion, the robot mode is mediocre at best.

So should you get Barricade? I do feel this is the best Barricade made to date, but that’s not saying too much. Alt mode is excellent, but bot mode is so-so. If you’re not crazy about the character, then perhaps wait for the MP Barricade that is due out sometime this year.

Below is a pic of Barricade with some other TLK figures, that will come in later months.

I mentioned in earlier entries that I made a visit to New Zealand and Australia in 2017. That was a great trip! And I wanna go back there so bad. Anyways, that happened in April of 2017. The 3 figures featured so far were found before the trip. All other figures this month were acquired after the trip. And believe me, I tried hunting for Transformers in Australia. I did locate some Toys R Us stores on Google Maps, but they were too far out of the way from where we stayed and where we went for attractions. Bummer. I would have liked to see Toys R Us in Australia, like I did for Paris and Shanghai. And now that Toys R Us is officially closing all stores here in the United States (and in the U.K.), I wonder if the international stores will survive.

Broadside

TR Broadside is one of the last figures I found in April, but I’m gonna talk about him now. For a long time, I was really hoping Hasbro would make a Broadside. I featured my CHUG Wreckers a while back, in this post. Look on the 3rd shelf, and I got all the original Wreckers updated in modern day form. Except for Broadside. So now having Broadside is a dream come true. That is, until I opened the figure.

Broadside is one of the original Autobot Triple Changers, along with Springer and Sandstorm. His 2 alt modes is a jet and an aircraft carrier. The concept of such a figure already boggles the mind. From a story perspective, Broadside has to be doing some crazy mass shifting to go from a regular sized bot to an aircraft carrier. And as for the toy, it’s very, very had to implement in physical form, because the shape of an aircraft carrier is very different from the shape of a jet. I never had the G1 toy, but I understand it’s not the best.

Titans Return is taking a stab at doing this difficult figure to please the hardcore completist fans, and I do appreciate them trying. But the end result is less than stellar. The aircraft carrier mode is decent, the robot mode is passable, but the jet mode is horrendous. The front of the jet looks ok, but the rear of the jet looks like something a fan would make up out of a toy as another mode. It’s as if the toy designers did not know what to do with the robot legs, so they kinda just stuck it in an awkward configuration for the rear of the jet called it a day. There is so much bulk at the back that this can’t be considered a good jet mode by any means. I don’t recommend this figure. Here are some pics.

Sky Shadow

Another figure I got towards the end of the month is Sky Shadow. He’s the last TR figure for the month. I did a quick review for him already, so read all the juicy details here. Sky Shadow is a recommended figure for this month.

Bumblebee, Kickback, Gnaw

The 3 TR legend class figures were bought as a set, for $32.99. I did find them all individually later in store for cheaper, but I wanted to lock them in early since legend figures always go fast when they first come out.

TR Bumblebee is not bad, but not great. Transformation uses the tried and true Bumblebee formula. Poseability is decent and construction is solid. I love the head and face sculpt, it’s done really well for a $10 figure. The Autobot logo is also nicely painted on and not a cheap sticker. The alt mode, while not a G1 bug, resembles something that Bumblebee would choose to be today. This figure doesn’t do anything that previous CHUG legend Bumblebees haven’t done, with the exception of one thing: A Titan Master can ride inside him in alt mode. You read that right. Most figures first released under the Titans Return line can have a Titan Master ride somewhere in their alt modes. And legend figures are no exception (if the alt mode is a vehicle). In Bumblebee’s case, the chest cavity is made hollow enough that a Titan Master can be squeezed in there in alt mode. However, this does mean that getting the car mode to clean up nicely after transformation is a bit tougher. The panel pieces surrounding the hollow cabin can collapse on itself inwards. My final verdict is that TR Bumblebee is a nice offering. Worth picking up if you have no other CHUG Bumblebees, or if you dig the the Titan Master riding feature. As for everyone else, this is an optional purchase.

TR Kickback is the last of the 3 famous Insecticons to be released in legend scale, in some kind of Generations line. We already got Thrilling 30 Skrapnel (Shrapnel) and Combiner Wars Bombshell (glad they could keep the name and not use Bombshock). Titans Return Kickback completes the trio. Overall, I like this Insecticon less than the other 2. The figure is ok, but he’s more flimsy than his Insecticon brothers. Construction of the figure feels cheap. He’s got parts dangling about in both modes, but that’s more of an issue with the initial character design. The insect mode is the weakest of the 3, by far. The mechanics of the transformation seems rushed and lazy. All TR legend figures use cheap ball joints, but Kickback’s implementation of them appear really obvious. If you got the other 2, than by all means pick up this figure to assemble the trio. But if you don’t, Kickback can be a skip. Or better yet, get one of the other ones first. My favorite out of these 3 is Bombshell, and it’s not because I’m partial to the character. He’s the most robust and solid out of the 3 Insecticons.

The last in this set of threesome is Gnaw. Anyone who has seen the G1 Movie knows that Gnaw makes up the drone soldiers of the Sharkticon army, under direction of the Quintessons. A G1 figure of Gnaw was made, and I think his allegiance was Sharkticon on the Tech Spec Bio. However, they still put a Decepticon logo on the toy, and I don’t recall if the name Gnaw was ever used in the G1 Movie or Cartoons. So was a figure made after the Movie designed this character, or did they take this toy and then make up the whole Quintesson backstory? We may never know. But what I do know is that TR Gnaw is pretty cool. He is one of the most unique figures that I have purchased in some time. His colors are unmistakably Gnaw. In robot mode he’s kinda stocky, but that actually reflects how he looked in the G1 Movie. Transformation to the metal shark creature is one of the most unique I have seen, and mechanically it actually works quite well. Robot head folds back, and the legs go backwards and form the shark back and head. Robot arms become the shark legs. The weapon becomes the shark tail. It doesn’t do justice when I describe it in words, but trust me it’s cool. I love how Gnaw looks as the shark creature. He’s got nice clear yellow eyes and a working lower jaw. Shark arms can be rotated, and the shark legs has a decent level of articulation. The alt mode also comes together well, forming a solid cohesive piece despite the fact that he’s got arms and legs. My only gripe is that he’s only legend class. In the Movie he’s actually a tad bigger than Hot Rod and Kup, so a deluxe or voyager class figure would have made more sense. But as legend class, I suppose some hardcore fan out there can get a bunch of these and assemble a Sharkticon army. I give Gnaw the highest level of recommendation. This figure is a required purchase for G1 fans.

E-Nergeon Cubes

I made quick post about these cubes here. See that post for a more in depth look at this high quality 3P accessory made to scale with your MP figures. Highly recommended.

MADLAW

Sixshot is not the only Six-Changer in the TF Universe. There is also an Autobot Six-Changer: Quickswitch. Only the most hardcore of G1-ers know about Quickswitch, and that’s for good reason. The toy came about way too late in G1 to matter. And, to be quite frank, G1 Quickswitch is not the best figure by any standards. In robot mode he looks like he’s wearing diapers, the puma mode is a mess, and his weird color palette of red and green is worthy of arrest by the Cybertron fashion police.

MADLAW is FansProject’s attempt at a modern Quickswitch, much like Hexatron is to Sixhot. Upon first hearing about MADLAW, I was quite excited. When he was finally released, there wasn’t much fanfare or fan buzz. Then the figure faded into obscurity, buried among the many 3P products that we are now saturated with today. Now I know why. Unlike the awesome Hexatron, Quickswitch is not a figure that will knock your socks off.

I purchased MADLAW sometime in late 2016. Tfsource.com had a sale for it at $39.99. I figured you can’t go wrong at this price. I didn’t have anything else to ship with MADLAW so I waited til now. And MADLAW did not make this worth the wait. He’s packed in robot mode. He looks alright in this mode, not great but not bad. He’s significantly smaller than Hexatron. So I guess MADLAW is meant to scale with CHUG.

The first mode I tried to transform him to is the boat mode. I didn’t get very far before I noticed something weird. On one side, the foot piece wouldn’t rotate and line up correctly to go into this alt mode no matter how hard I tried. Turns out, I got left foot pieces on both legs! At this point I gave up on trying to transform the figure and MADLAW stayed in robot mode all this time.

I contacted Tfsource.com to have the situation remedied. Tfsource made me take pictures of the issue, so I did and sent it to them. Then they come back saying I contacted them after 30 days, and per their policy they can’t do anything after 30 days. I got two problems here. One: why did they make me take pictures if all they are gonna say is this is past 30 days? That was a total waste of my time. Two: quoting a policy to not remedy the problem is simply hiding behind policy to do nothing. Real good here, tfsouce. Aren’t you the one that makes the policies? There is no faster way to alienate customers than hiding behind stupid policies. I have since given tfsource way less business. Both capturedprey.com and thechosenprime.com have gone to much greater lengths to take care of me. I mentioned how capturedprey.com got a replacement stand piece for me for Soar. And more recently, thechosenprime.com got me a replacement piece for Contactshot. On a part that I broke! And I broke it about 4 months after the purchase! I now give these 2 much more business. Screw Tfsource!

Anyways, back to MADLAW. Even without the foot piece issue, I don’t think he’s such a great figure. He is kinda small for today’s standards. The only alt mode I tried to get him to didn’t look all that good, even if there was not a wrong foot piece getting in the way. Transformation for that one mode also didn’t feel that smooth. I realize I didn’t fully give the figure a chance here, but if FansProject had better QA, I would have. I blame FP for including the wrong part to begin with, and tfsouce for not fixing the problem. As it stands, I do not recommend this figure. For that reason, I’m not gonna include any pics of MADLAW out of the box. My thoughts about the figure may change, if I choose to dig out this figure and play with it more. But that seems highly unlikely.

If you’re wondering why this figure is called MADLAW, it’s because each letter in the name is also the first letter for each of the modes. For example, W stands for Wood Runner (the puma mode).

All this reminds me of the time I got two left hands for the TF Animated Rodimus figure. How do errors like these happen? Sometimes I really wonder what goes on at a transforming figure toy factory. I have a feeling I might not wanna know. I hope it’s not as bad as what I read about Apple factories.

Is another 3P going to take a stab at their own Quickswitch? Only time will tell.

Turbo Ejector

Last but certainly not least, I have to mention Turbo Ejector. This awesome figure is Warbotron’s interpretation of Technobot Afterburner in MP scale. I did a quick review of the figure. Go read that for all the details, or just trust me and go buy this figure now.

To summarize, these are the grades for the figures this month:

Recommended:

• RiD Soundwave
• TR Gnaw
• TR Sky Shadow
• E-Nergeon Cubes
• Warbotron Turbo Ejector

Mediocre:

• TR Bumblebee
• TR Kickback
• RiD Blurr
• TLK Barricade

Not Recommended:

• TR Broadside
• FansProject Function-XV MADLAW (though this may change)

Transform and Roll Out.

 

I love the Masterpiece line of Transformers. Takara has done so many characters now. Some of the MP interpretations of Autobots from Season 1 are still my favorites. Below I have pics of MP Optimus Prime with different teams of Autobots, ready to roll out and kick some Decepticon butt!

Team 1 was already featured back in this post. I kept Prime and swapped in some other MP Autobots for Team 2.
 

Team 1

• Optimus Prime
• Ironhide
• Wheeljack
• G2 Bumblebee
• Bluestreak – with Alpha Launcher
• DX9 Invisible (aka Mirage)

 

Team 2

• Optimus Prime
• Ratchet
• Sideswipe
• Bumblebee
• Prowl – with Omega Launcher
• MakeToys Gundog (aka Hound)

 

Transform and Roll Out!
 

I have a lot of Transformers. I do play with them, and I try to be as careful as I can be when transforming them. But when you have as many as I do, you’re bound to break some. Occasionally the figures come broken (yes this has happened). Sometimes an inherent flaw in manufacturing or design lends the figure to breaking after only a few play.

Below are 10 of the figures from my collection where something has occurred to render them less than perfect. My heart breaks every time one of my Transformers breaks. Read on and see if you have mishandled any of these 10.
 

Brawl (Leader Class)
Series: Movie (2007)
Allegiance: Decepticon
Function: Ground Assault
Mode in Package: Robot
Known Redecos: Movie Deep Desert Brawl
Status: Returned to store; got replacement

The Figure:
Movie Leader Class Brawl is one of only few Leader Class figures I have from the entire Movie-verse. I highly recommend him. The robot mode is decent, but the tank mode is where this figure truly shines. He also has working lights and sounds, if that’s your thing.

The Incident:
First time I purchased this figure was from Toys R Us, and he was already broken out of the box. I documented this already, back in this post. There was a peg that came broken. It’s been more than 10 years now, so I don’t remember exactly which peg. But I think it was on the turret.

The Aftermath: I quickly returned Brawl to Toys R Us. I would have simply asked for a exchange, if they only had more of the figure. Since they didn’t, I asked for a refund and then bought it again on Amazon. And for cheaper too – looking up my old Amazon records, I re-purchased him for only $31.99! Can’t imagine getting a Leader Class figure for that price nowadays.
 

Samurai Prowl (Deluxe Class)
Series: Animated
Allegiance: Autobot
Function: Autobot Spy
Mode in Package: Motorcycle with Sidecar
Known Redecos: none
Status: Returned to store; no replacement

The Figure:
Samurai Prowl is one of the hardest figures to find from the Animated line. I was super thrilled when I found one on pure happenstance. He appeared on a TRU shelf when the TFA line of toys was officially over. I documented that purchase here and a review here.

The Incident:
I outlined how I damaged the toy in the review. Specifically, the connection between the motorcycle and the side car is broken. The whole thing happened in such a way that I didn’t even notice it when the breakage occurred. I have must broken it on the first transform from alt mode to robot mode, because I saw the breakage on the reverse transformation. I’m forced to think that connection must have been super brittle. However I haven’t seen any other documented cases of this, so it’s possible I was being too rough. Though that’s not like me at all – when it comes to my TFs I’m usually careful to a fault.

The Aftermath:
I wasn’t happy about the breakage at the time, and I don’t feel any better about it now. I returned the figure to TRU, because perhaps the TF OCD in me can’t stand to have broken figures in my collection. But like I said, this figure is hard to find. I only saw him one other time. It was at the dealer’s room at a BotCon. The dealer wanted $40 for it, and no way was I gonna pay that. Sad to say, I never saw the figure in store again. Checking on Amazon just now, the lowest price is around $100. In retrospect, maybe I should have just hung on to my broken Samurai Prowl, or spent the $40 at BotCon for another one.
 

Bumblebee (Deluxe Class)
Series: Animated
Allegiance: Autobot
Function: Autobot Speedster
Mode in Package: Car
Known Redecos: Elite Guard Bumblebee, Jetpack Bumblebee
Status: Damaged; got replacement

The Figure:
From one TFA figure we go to another. I got TFA Deluxe Bumblebee in a pack of 15 figures I bought used on Cragislist, something that I documented here. TFA figures as a whole don’t have the best construction. They often feel like cheap plastic cobbled together into a toy by ill-fitting ball joints. Bumblebee is a prime example of this. The alt mode cockpit pieces that form the back of the legs are connected by ball joints. One of them is too loose, and keeps coming off.

The Incident:
I tried to fix said loose joint by applying some nail polish to the socket. Unfortunately, I applied too much and now the ball won’t go in at all. So I guess you could say I broke this by trying to fix it.

The Aftermath:
I tried to buy another Bumblebee in store, but by then the Animated line was officially over. Online retailers were all charging a markup. Bumblebee is a mediocre figure at best, so I’m not paying markup for such a figure. Fortunately for me, I was able to get a Japanese version of this figure at a pretty good price, way less than whatever the MSRP was. That purchase was outlined here. The Japanese version is better anyway, with shiny chrome paint and slightly better construction. This is the figure that represents my Bumblebee in my TFA line. As for the “broken” Bumblebee, I keep him around for spare parts. He has come in handy, which brings me to my next entry…
 

Megatron (Voyager Class)
Series: Transformers United
Allegiance: Decepticon
Function: Decepticon Leader
Mode in Package: Robot
Known Redecos: Classics Megatron, Henkei Megatron
Status: Repaired

The Figure:
I am still not sure what exactly is Transformers United. It was a Japanese only line. As far as I can tell, Takara took a bunch of Henkei figures, repainted them, and released this United line. There was no US equivalent. Anyways, Classics Megatron was one of the first 6 figures produced in the Classics line. The line is significant in that it started an update of classic G1 characters in modern forms while still capturing the G1 spirit. As a figure, the design of Classics Megatron is questionable. He does transform into a gun, which all G1-ers love. But Classics Megatron fits the very definition of shell-former (think G1 Scourge). Also, his alt mode kinda looks like a futuristic Cybertron pistol at best, and a toy water gun at worst. The Classics colors also don’t help matters, and even I have to agree that the US version of the figure used some kid friendly colors that made Megatron look like a Nerf toy gun. And so I wanted a more G1 accurate version of this figure. I was at BotCon 2011, and saw a dealer selling the United version of this figure at a reasonable price. So I bought it.

The Incident:
I’m not in the habit of opening my toys at the convention. After I got home, I find that something is wrong with the transformation. I can’t get the waist to properly align correctly for alt mode. Upon closer inspection, I see that a part in the waist is installed backwards! The whole thing is assembled with a screw, so all you really had to do is unscrew the assembly, re-position the part, and re-screw. However, it took me sometime to figure all this out. And by the time I did, I totally mangled the head of the screw. Fortunately I got the screw out, but there was no way it could be used again.

The Aftermath:
In the last entry I mentioned I use TFA Bumblebee for spare parts, and he has a screw that kinda fits into United Megatron. I now use that screw to secure this part of Megatron’s waist. The part in question is only visible during transformation. The fit with Bumblebee’s screw is not perfect. Rotation of the part using this screw is quite loose. However, the loose rotation is only apparent during transformation. And the waist as a whole has other parts that lock it into place in both alt and robot modes. So I’m ok with this fix. I have made peace with the fact that my United Megatron is not perfect, but functional (que “I still function” from the G1 Movie).
 

Darksteel (Deluxe Class)
Series: Dark of the Moon
Allegiance: Decepticon
Function: ???
Mode in Package: Sports Car
Known Redecos: DotM Sideswipe
Status: Damaged; got replacement

The Figure:
Dark of the Moon Darksteel is not a character in the movie. I’m not sure if he has an appearance anywhere. Darksteel is another quick cash grab off an existing mold, in this case Sideswipe from the same movie. In all honesty, this mold is pretty cool. The redeco colors chosen for Darksteel is smashingly striking, and he does have a unique head mold that differentiate him from Sideswipe. I bought one when the figure was first released. I transformed him from alt mode to robot mode no problem.

The Incident:
Some months later I decided to transform him back to alt mode. It was late a night and I guess I was a bit too careless. Long story short, I bent one of the feet pieces the wrong way and broke it. I have transformed Sideswipe many times so I thought I knew the process, but I will admit that I don’t remember how TFs transform as well as I used to.

The Aftermath:
Some months after the first breakage, I went to shop at Kohls because they mailed me a $10 certificate, good for anything in the store. Most people don’t know this, but Kohls also has a toy section. Occasionally they will have Transformers. Anyways, on this particular trip, I find that they had Darksteel. They were already having a 10% off sale. And with the $10 certificate, the final price of Darksteel came to only $3.90. I documented that purchase here. To this day, I still have this 2nd copy of Darksteel mint in the package. I’ll probably keep this unopened. He’s not worth so much now, but maybe one day.
 

Optimus Prime (Voyager Class)
Series: Transformers Prime Beast Hunters
Allegiance: Autobot
Function: Autobot Leader
Mode in Package: Robot
Known Redecos: Beast Hunters Optimus Prime (with extra green armor)
Status: Attempting repairs; got replacements

The Figure:
You didn’t think I was gonna get through this list without having an Optimus Prime figure on here, did you? Hasbro makes so many Optimus figures that it would be weird not to break one if you collected as many TFs as I did. I really like Beast Hunters Optimus. The toy is a good size to play with. He’s got a fun and intuitive transformation, and the figure looks good in both modes. I’m not crazy about the head mold, and hardcore TFP fans love to point out that his sword in the show is blue, not green. Still, at less than $20, this is a terrific OP figure.

The Incident:
I have only ever broken one Optimus Prime figure, and it’s this one. It could be worse, like if I broke the MP-10. But like I said, BH Optimus is one of the better figures of the famous Autobot Leader, so I’m still a bit bothered by it. Also, this figure represents something significant in my personal life, as I have documented here. So it kinda pains me to see it less than perfect. What happened is I broke the sword while Optimus is holding it, so now the handle of the sword is stuck in Prime’s right fist. I felt the sword being stuck in the fist, yet I still tried to force it out. Not a good move. Though I’m sure it was a bad job with the tolerance that led to this. My buddy Gemini had the same problem. Only he was more patient and submerged the fist and sword in really hot water and pulled it out.

The Aftermath:
To compensate for this breakage, I went out and purchased more BH Optimus figures, documented in the same post. I got both the US and Japanese versions of this, so now I have two unopened BH Optimus Prime figures sitting in a closet. I’m glad I did, because they are now worth quite a bit. I still want to attempt a fix on my original figure though. I recently bought the 3rd party Blue Skybreaker Sword by Dr Wu that is way better than the sword that came with BH Optimus. Now I just need to get the broken sword handle out of Optimus’ right fist. If I can do that, I will consider this figure back in perfect condition. Maybe I’ll try Gemini’s hot water trick.
 

Bumblebee (Deluxe Class, part of TRU Exclusive 2-pack)
Series: Age of Extinction
Allegiance: Autobot
Function: ???
Mode in Package: Robot
Known Redecos: AoE Bumblebee, standard edition
Status: Damaged; no replacement

The Figure:
How many Deluxe Bumblebees did they make from the Movie-verse? Too many to count, that’s for sure. I got one Deluxe Bumblebee in modern Camaro form from each of the 5 movies. The one featured here is from the 4th movie: Age of Extinction. After a while, all these Bumblebees just kinda blend together. The later Bees became one giant yellow blur. I don’t remember anything special about this one, other than the two circular disc type weapons that he has. For AoE, I got the special TRU 2-pack edition. The package comes with the standard AoE Deluxe Bumblebee that’s painted a bit more orange, and a repaint of Generations Legend Bumblebee from the Thrilling 30 line. One of these days I should put together all my Deluxe Movie Bumblebees for a group photo.

The Incident:
One night when I was transforming AoE Bumblebee from robot to car, I broke off the this right shoulder piece. This piece becomes the front right area of the hood in alt mode. I don’t even know what happened exactly. The part just broke on me. I dunno, I might have forced something, or maybe the part was just weak. Movie toys usually don’t have the best construction to begin with.

The Aftermath:
I thought about buying another standard Deluxe AoE Bumblebee to replace this broken one. But my feelings about this figure is mediocre at best. I didn’t wanna pay MSRP, though I was never able to find another one at less than that. So chances are this figure will just remain broken, not getting replaced or repaired.
 

Bumblebee (Deluxe Class, part of Bumblebee vs Barricade First Encounter 2-pack)
Series: Movie (2007)
Allegiance: Autobot
Function: ???
Mode in Package: Robot
Known Redecos: Movie (2007) Bumblebee standard edition, Target Exclusive Evolution of Bumblebee 2-pack
Status: Damaged; no replacement

The Figure:
How many Bumblebees are we gonna have on this list? And why do I keep breaking them? This is the last one, I promise. This is the very first Deluxe Bumblebee released in the Movie-verse. This figure transforms into a classic Camaro, the car that Sam first owns for the first half of the original Movie (and still the best). All the initial Movie toys had this crazy gimmick called “Advanced Automorph Technology”, sometimes just Automorph for short. Basically, several parts of the figure will auto transform upon moving a single piece. This is usually done through spring-loaded action built into the figure. In the case of this classic Caramo Bumblebee figure, the hood will automatically fold down to form the chest upon doing something else (of which I don’t recall anymore). It sounds cool, but it really isn’t.

The Incident:
The problem with these kinds of physical gimmicks is that they’re prone to breakage, and that’s exactly what happened. Years after I owned this figure, I dug him out of a box in the closet. I usually keep my figures in alt mode. When I found him, I saw that the car’s front hood is folded down. I tried to fold it back up, but it won’t click into position anymore. This figure broke while it was in storage. Some plastic pieces broke off after years of holding Automorph spring pressure. I probably should have stored this guy in robot mode. Lesson learned.

The Aftermath:
I actually had another version of this figure as part of the Target Exclusive Evolution of Bumblebee 2-pack. I kept it new but then sold it later, before I found out about the breakage. I do kind of want another one of this Bumblebee, not because it’s a great figure, but for it’s significance as part of a toyline that crossed from animation into live action media. Not a priority though.
 

M-F-B
Series: N/A
Allegiance: Autobot
Function: N/A
Mode in Package: N/A
Known Redecos: None
Status: Damaged; no replacement

The Figure:
This isn’t technically a figure. This is a gun accessory called M-F-B by 3rd party MakeToys. Due to licensing reasons, they can’t call it what it is, which is My First Blaster. In the IDW line of TF comics, this is a weapon for smaller sized Autobots. Swerve is often seen holding the weapon. MakeToys made this accessory to go with their Swerve figure (called Trash-Talk).

The Incident:
I got this accessory in the hopes that it would fit the Generations Thrilling 30 version of Swerve. Turns out, it doesn’t. The handle for M-F-B is 3mm, while Swerve’s hands are for 5mm weapons. Also, I didn’t know this came as a model kit (or maybe I did, but then forgot). I’m terrible at building models. During assembly, I broke off one of the light green bulbs that go on top of the M-F-B. Total bummer.

The Aftermath:
The breakage is beyond repair. And since this actually doesn’t even fit Generations Swerve, and I don’t have Trash-Talk, there’s no point for me to hunt down another one. This M-F-B will stay broken.
 

Soar (Blue)
Series: N/A
Allegiance: Autobot
Function: Bombadier
Mode in Package: Robot
Known Redecos: Soar (Red), Soar (Red comic), Soar (Blue comic)
Status: Repaired

The Figure:
Soar by Fans Toys is an awesome homage to G1 Swoop. I have written about this figure already, so read all the details here. If you are collecting Masterpiece style figures and you need to round out your Dinobot collection, you need this figure.

The Incident:
Nothing was technically broken on my Soar. However, when I got the figure, it was missing the large vertical piece of the display stand that Soar sits on in dino mode. I couldn’t believe it! This is the largest piece in the package next to Soar itself. I love Fans Toys, but where was the QC on this?!

The Aftermath:
Capturedprey.com was gracious enough to hunt down a replacement piece of the stand for me. It took several months, but better late than never. I now have a fully completed Soar figure in perfect condition with all accessories intact. Thank you Capturedprey!
 

I do have more figures that are broken/damaged/missing parts, but these 10 will do for now. I’ll make another post when I have another 10. Hopefully that won’t occur. Though with the amount of Transformers I have, it’s only a matter of time.

What figures have you broken? Or come damaged or missing parts? Feel free to comment below.

Transform and Roll Out.
 

So I finally watched this movie. And I’ll get straight to it: I was entertained, but this is not a good movie by any stretch of the imagination.

I watched Transformers the Last Knight with several others. We probably had more fun making fun of the movie than really trying to follow what’s going on. The Last Knight is filled with humorous and ridiculous sequences. One example is a scene where Cade Yeager had to jump off a building and onto some TFR automatons as if they’re platforms, like if he was playing Frogger or Pitfall. The Last Knight is the least successful of the 5 films, financially speaking. That’s no surprise. I watched the first 4 movies in the theater, but passed on this one. We rented the movie from iTunes, but only because we had free credits. So technically we spent no money on LK (not counting some figures I bought).

The Last Knight is going for a Arthurian knight motif. That’s obvious by looking at the trailers. Both Prime and Megs look more like knights in this one, and personally I think it’s kinda silly. Mark Wahlberg returns from the previous installment. Josh Duhamel, John Turturro, and Stanley Tucci come back for more as well (though Tucci as a different character). Anthony Hopkins joins the cast. Why someone of his caliber wants to lend his talents to this hot mess of a movie is beyond me. Tyrese wanted to come back, but he obviously wanted to spend his time in a superior franchise (FF8). Early reports were that Megan Fox would be back, but I’m guessing people got confused since Laura Haddock looks so similar in some early leaked shots. Good thing Peter Cullen and Frank Welker are both back as Prime and Megs.

LK is full of your usual Michael Bay movie mayhem. Big explosions, check. Bad editing that jumps for scene A to F to M, check. Immature, racist, and juvenile dialogue, check. Robots that all look the same, check. Uber male objectification of women, check. Plot that you can’t follow, check. And even if you could follow it you see that it makes no sense, check.

But believe it or not, I don’t think LK is the worst film in the franchise. Here’s how I rate the 5, from best to worst:

• Transformers
• Transformers: Dark of the Moon
• Transformers: The Last Knight
• Transformers: Age of Extinction
• Transformers: Revenge of the Fallen

As for the toys, LK is below average when compared to other movies. As of this writing I have bought 6 figures total from LK, and I feel like I have enough to rate the line as a whole. Here’s how I rate them, from best to worst:

• Transformers: Revenge of the Fallen
• Transformers: Dark of the Moon
• Transformers
• Transformers: The Last Knight
• Transformers: Age of Extinction

Both Michael Bay and Mark Wahlberg have said they are not coming back for more. I suppose that’s the good news in all of this. Bay must be sick of this franchise after 5 outings. Personally I feel like he never really cared for what Transformers represents to long-time fans that have supported it all these years through thick and thin. After the first movie, Bay has so thoroughly twisted the Transformers mythos that anything moving forward bear only a shallow semblance to the original source material. I actually like Mark Wahlberg as an actor, but I think he’s got better things to do. Wahlberg has complained about this franchise after LK hit theaters, including that he doesn’t like his haircut in part 5. I agree. Time for a new leading man.

It will be interesting to see how things wrap up in part 6, which is already confirmed for Summer 2019. I’m curious how the movie would feel without Bay’s influence. But before this, a Bumblebee spin off is slated for late 2018. I’m not sure where or when the story would take place in the TF Movie-verse. Hailee Steinfeld is confirmed to be in the movie.

I hope the Bumblebee movie will be better. New blood will be good for the franchise. Transform and Roll Out.
 

Michael Bay blow stuff up crapfest #5 will soon be upon us. The teaser trailer was released yesterday. Check it out.

I dunno. I have been excited and jaded by the past 3 movies. This article sums up how I feel. Still, that one shot of Unicron has me all giddy like I’m 12 again. Maybe… just maybe… this will be good. But in the end this movie will suck. And I will have paid to watch it in the theaters.

Every TF movie thus far has had an older white guy in a position of authority. Jon Voight in the original movie. Rainn Wilson in Revenge of the Fallen. John Malkovich in Dark of the Moon. Kelsey Grammer in Age of Extinction. And now we have Anthony Hopkins in The Last Knight??!! What’s with this weird trend? I do give credit to Michael Bay for attracting some big Hollywood talent. And it also looks like Megan Fox begged her way back to Bay’s good graces. I guess that’s not news considering she was in TMNT.

Let’s hope we at least get some good toys for TF5. Transform and Roll Out.

Since I started tracking my purchases on this blog, October has provided no shortage of TF action in either figure count and/or spending. October 2012 holds the record for highest TF count in a single calendar month (at 24 figures), and October 2014 holds the record for most TF spending in a single calendar month (at $885.90.. yikes!).

In true October fashion, this month is also filled with TF purchases that are way above my average monthly tally. I don’t think October 2015 sets any new personal records, but there are a lot of figures here nonetheless.

• Combiner Wars Ultra Magnus and Minimus Ambus, amazon.com, $40

• Combiner Wars Ironhide, Target, $14.99

• Combiner Wars Prowl, Target, $14.99

• Combiner Wars Sunstreaker, Target, $14.99

• Combiner Wars Mirage, Target, $14.99

• Combiner Wars Cyclonus, amazon.com, $17.89

• Masterpiece Bumble G-2 Ver., hlj.com, $36.47

• Perfect Effect Perfect Combiner PC-05 Upgrade Set, tfsource.com, $32.99

• Before & After Omega Launcher for MP-17 Prowl, tfsource.com, $14.95

• ToyWorld Devil Star, tfsource.com, $119.99

• Warbotron Sly Strike, tfsource.com, $75.99

• Fans Toys Sever, tfsource.com, $179.95

Let’s start with Combiner Wars Ultra Magnus. This is hands down my favorite Ultra Magnus figure of all time! That’s a strong statement, considering I own almost all of them. I like this figure even better than Masterpiece UM, because the CW fig is less blocky and more playable. I have gone into details about this figure back in the post, so I won’t do it again. Minimus Ambus is a character I know nothing about. I believe he’s from the IDW-verse of comics, but I could be totally wrong here. The Minimus Ambus figure in this package is completely forgettable and adds nothing to the Ultra Magnus toy.

Below is pic of my two favorite Ultra Magnus figs of all time.

Combiner Wars continue with more figures that are very minor reworks of what’s already out there. In this month we get Ironhide, Prowl, Sunstreaker and Mirage. Hasbro really knows how to milk us hardcore G1 fans by tweaking existing molds very slightly and then releasing them as popular G1 characters. I probably could have skipped this foursome altogether, but I’m a total sucker for G1 characters from the first 2 seasons. And I needed figures that would make sense to combine with CW Optimus. Ironhide, Sunstreaker, and Mirage are reworks of existing Stunticons (Offroad, Breakdown, and Drag Strip, respectively). Prowl is a rework of Streetwise. I won’t go into detail since the rework here is so minor that we may as well just call them repaints.

Cyclonus is yet another rework in the CW line. But this is one rework that feels truly like a rework, and not a repaint with different colors and a different head. A rework of CW Silverbolt, I really dig this Cyclonus figure. He looks absolutely fabulous in the stunning purple paint. Robot mode is nicely proportioned, and the jet mode looks fast and sleek. In addition to the different head mold, Cyclonus offers different wing molds and different nosecone mode in jet mode. And of all the CW body figures, the Silverbolt/Cyclonus mold offers the best combining mechanism, in both function and appearance. The combined head mold is also different, as it is a good representation of Galvatron and not Superion. It’s too bad Cyclonus’s weapon is an exact repaint of the Silverbolt’s weapon, but in this case that’s a minor nitpick. I highly recommend Cyclonus. There are enough difference here from Silverbolt that it feels like you are buying a brand new figure.

Galvatronus is the name of the combined form when Cyclonus is the body. Supposedly CW Cyclonus has the power to mind control other limb components and have them merge with him. That’s kind of a hokey backstory, but whatever. I wish they made Scourge and Sweeps as limb components to form Galvatronus, which makes way more sense. That’s actually a pretty awesome combination now that I think about it. Maybe some TF modder out there has done this already. Anyways, below is a pic of Galvatronus using the 4 CW limb Autobots acquired this month.

The only official Masterpice figure this month is G-2 Ver Bumble. I already stated many, many times about how I love MP G1 Bumblebee. The G2 Ver of the figure is the exact same mold, except he’s covered with shiny gold paint that I initially thought this would be Goldbug. And instead of the Spike figure, we get a second face plate that more resembles the original G1 toy, and a nice rocket pack that we have seen Sideswipe or Optimus use (it’s unclear to me if Bumblebee ever used the rocket pack). If you already have the first MP Bumble, then it’s not necessary to get this figure. But I did anyway, because I love this mold, the new shiny paint job, and all the extra accessories.

Perfect Effect Perfect Combiner PC-05 Upgrade Set and Before & After Omega Launcher for MP-17 Prowl are two upgrade kits that are similar to the upgrade sets that I bought back in June of this year. Specifically, they are repaints of Perfect Combiner PC-02 and Alpha Launcher for MP-18, respectively. Perfect Combiner PC-05 is meant to be used with Combiner Wars Superion, but technically you can use them with any of the CW figs in combined form. Omega Launcher are non-firing shoulder missile enhancements for MP Prowl. Again, they are exact repaints of what came before, so I won’t go into them too much. Actually, I have not even had the chance to put Omega Launcher on Prowl. But in theory it should look just as awesome as Alpha Launcher on Bluestreak.

Devil Star is ToyWorld’s interpretation of Astrotrain. I love ToyWorld, and I love Astrotrain, which is why I pre-ordered this figure as soon as I learned that they are doing a G1 cartoon accurate version (TW had another version of this figure prior to this called Evila Star, with colors that are more similar to the original Takara toy). I have so much faith in ToyWorld that I knew they would do Triple Changers justice. However, I later watched some reviews of Devil Star (and Evila Star), and learned that this guy is an absolute pain to transform. He’s very much a panel former, which doesn’t bother me that much. But it’s excruciatingly unpleasant to get all the panels to line up in both alt modes. I wanted to cancel the pre-order as soon as I found out, but I was a little too late on the trigger and the pre-order came in before I knew it. So now I have it stuck in my possession. To this day, the figure is brand new, never opened. And I don’t plan to. Maybe one day he will be worth big bucks and I’ll resell it. Devil Star is a limited edition figure. In the pic above, the big box is the figure itself, but the little box on top are these exclusive train tracks that are produced in very limited quantities. I am looking to sell the figure. If you’re reading this and want to make me an offer, contact me.

It took some time, but it finally happened… I got a figure from Warbotron! I wrote about Warbotron more than 2 years ago before this month, and I’m ashamed to say that it took a sale for me to finally buy something from them. My buddy Gemini has the entire Warbotron Combaticon set, and he thinks Sly Strike (aka Swindle) is the best of the bunch. So I have been eyeing Sly Strike for quite some time now. I almost bought the figure at regular price, and I’m glad I didn’t when I saw that TFSource was selling them at $14 off from MSRP. I wasted no time getting one. Gemini did not let me down – Sly Strike is awesome! He comes packaged in robot mode. The body stylings is modeled more after the G1 toy and not the show, but body proportions is definitely updated to modern standards (old G1 body proportions would be awful). His face and head mold looks like it jumped straight out of the G1 cartoon, as its got the famous purple eyes and that discriminant black-market salesman grin that only Swindle can possess. Chest area has a similar purple molding like the G1 toy, though fans have come up with an alternate configuration for the robot mode where the jeep hood area can form over the chest for a more Binaltech/Alternator appearance. The figure is also designed so the wheels over the shoulders and the back area can be transformed differently to suit your taste. Warbotron took more liberties with the alt mode, and in my opinion that’s not necessarily a bad thing. In G1, Swindle transforms into a FMC XR311 combat support vehicle. Munitioner by FansProject uses a military Humvee as the alt mode. Warbotron decided to use a Jeep type vehicle, like the Jeep Wrangler Commando. Some fans may complain this is not G1 enough, but I think it’s a good modern update. The detail, colors, and moldings of the alt mode is terrific as well. Transformation of the figure is fairly straightforward. It’s not overly complicated, but at the same time complex enough to satisfy collectors of 3rd party items. Construction wise, Sly Strike does suffer from some slight tolerance issues, but nothing so glaringly bad that it would distract from the enjoyment of the figure. As for his weapons, the hand held pistol is almost an exact replica of G1, updated to MP scale and modern detail standards. Warbotron took more liberties with the cannon and gave it a translucent pink barrel, and personally I think it’s a nice touch. All in all I highly recommend Sly Strike as the MP scale figure for Swindle. I thought I got a good price for Sly Strike at $75.99, but TFSource has been clearing them out at $66.99 for the past few months! Get them while they last!

Last but certainly not least, we have Sever, Fans Toys’ interpretation of Snarl in MP scale. Sever is the 2nd figure that I got in the Fans Toys line of MP Dinobots. The first one was Scoria (aka Slag). FT released Soar (aka Swoop) in between Scoria and Sever, but I didn’t have a chance to buy that one. Scoria is generally considered a good figure, but he’s not without his faults. He’s got the now famous loose shoulder issues that many fans complain about. Surprisingly, mine is fine in the shoulders (I did buy the repair parts for $4 just in case). However, my Scoria is quite loose in the hips. If I pick up Scoria, the legs would definitely droop down at the crotch, and he won’t be able to hold any cool poses. Part if this is because there’s so much weight in the legs. Other fans have complained about some other minor construction issues. Overall I like Scoria, but he was not the perfect MP dino that I thought he would be, because of the loose hips. So when Sever came out, I was a little nervous that he would also share similar issues. But I chose to buy him anyway, because of the $20 early bird discount. I am happy to report that Sever is absolutely perfect! I detect no construction issues whatsoever. All joints are just the right amount of tightness. Some fans complain the joints are too tight, but I think they’re fine. He can hold some terrific poses, and the figure has enough articulation to take full advantage of the solid construction. In both mode, Sever looks like he jumped straight out of the G1 show. Transformation is also superb. He’s not terribly difficult to transform, but at the same time there’s enough going on in the mechanics that hardcore collectors of this line would not find him too simple. The details on this figure would satisfy even the most picky. The weapons for Sever are awesome as well. They both have light up LED capabilities, though batteries are not included. Check the LED operation of the weapons as soon as you get Sever, as I heard some fans complain about them not working. And if I have to make one small nitpick, it’s that there’s no place for the weapons in Dino mode. But that aside, it really feels like Fans Toys is taking all their lessons learned with Scoria, and they have implemented them in Sever. (They may have done that with Soar as well, as I have heard nothing but praises.) This is 3rd party MP Dinobot at it’s best. To this day I still have Sever out for display, because I like him that much. I highly, highly recommend Sever. Fans Toys have fully restored my faith in their line of MP Dinos. I am now looking forward to getting both Soar and Stomp (aka Sludge), the latter of which came out after Sever.

That ended up being a way longer post than I meant for it to be. October of 2015 had 12 purchases, for a total of 11 figures and 2 upgrade sets. This is the last month in 2015 with a high number of purchases. This month was also a lot of repaints. By my count, only 4 purchases are not repaints or reworks. Even the 2 upgrade sets are repaints. Sometimes I buy TFs purely based on if I like the character; I think in the future I need to be more mold conscious. I am very happy about Sly Strike and Sever, two of the more expensive purchases this month. A bit regretful that I should have cancelled Devil Star when I had the chance.

Til next time… Transform and Roll Out.

OK, I am now finally getting back to documenting my monthly purchases. I swear to Primus I will finish this and catch up to where I am currently. Might take many posts, but it shall be done!

• Robots in Disguise Grimlock, Toys R Us, $16.99

• Generations Thrilling 30 Arcee and Chromia, tfsource.com, $31.99

• Combiner Wars Optimus Prime, amazon.com, $24.99

• Combiner Wars Silverbolt, amazon.com, $24.99

• Combiner Wars Thundercracker, amazon.com, $10.99

• Combiner Wars Powerglide, amazon.com, $10.99

• Combiner Wars Windcharger, amazon.com, $10.99

• Combiner Wars Bombshell, amazon.com, $10.99

• Toyworld TW-H04 Infinitor, tfsource.com, $114.95

• Microblaze Creations MBC002 Military Titans, tfsource.com, $109.95

• Masterpiece Ultra Magnus, hlj.com, $122.77

• Masterpiece Bumble, hlj.com, $44.26.

Here are the stats breakdown for the month:

• 1 fig from Robots in Disguise
• 2 figs from Generations Thrilling 30
• 6 figs from Combiner Wars
• 2 Masterpiece figs
• 2 Third Party figs

First up is RiD Grimlock. I think this was my first figure from the Robots in Disguise line. RiD figures as a whole seems cheap and simplistic. But this is Grimlock, so I gave it a shot. I dunno… he’s not bad, but not great either. Fun to play with for a while, but very forgettable once the fig is put away. I don’t think too highly of the RiD line, and this figure doesn’t do anything to change that perception.

Arcee and Chromia are the last of the Generations Thrilling 30 figs that I would buy. I still don’t know where this Thrilling 30 tag comes from… I am guessing maybe it’s the 30th anniversary of TF. Whatever the reason, I have enjoyed figs from this line. Arcee was one that I waited for. We finally get a good CHUG representation of everybody’s favorite female Autobot in her G1 stylings. Alt mode for Arcee looks awesome. Robot mode wise, she’s got some kibble on the back, but nothing I can’t live with. Transformation wise she’s a bit of a shell-former, which again deals with the back kibble. But I think I’m just so happy to get an official CHUG Arcee that I’m willing to overlook these minor shortcomings. Chromia is an excellent figure. I believe Chromia is a minor remold of Transformers Prime Arcee. In robot mode they look very similar, but Hasbro did enough modifications to the alt mode to make Chromia feel like a brand new figure. She looks like those bikes out of Tron. Very very cool! I actually enjoyed playing Chromia more so than Arcee. But I am glad I have both TF fembots in my collection.

OK – Now on to Combiner Wars! This is a series that I have looked forward to for some time. Combiner Wars officially kicked off in January of 2015. CW is a G1-inspired subline in the TF Generations line of figures. The gimmick here is that one voyager sized figure and 4 deluxe sized figures can combine to form a giant robot. Much like the combiners from G1, the toy limb components can be mixed with any bodies in any combination (like Scramble City). Third parties have been doing combiners for quite some time now. So I guess it’s about time Hasbro got on this trend and make some money off their own properties, instead of letting third parties hog all the action.

I wasn’t able to find any deluxe sized figs this month, but I was able to get 2 voyager figs and 4 legends figs in CW. These won’t combine obviously, but I like all these characters so I bought them all.

To start things off, we get CW Optimus Prime. Yes friends, they made OP into a combiner. Not technically G1-esque, but whatever. They are also using this mold as Motormaster (which I will go into in future posts), so this is more of a way for me to check out the mold. The robot mode is kinda blocky. Truck mode is not bad. I’m personally not too impressed with this mold in combiner body form. There is a problem with the hips of the figure. But between robot and truck modes, the construction is solid and robust. So for me, the CW OP fig is just ok.

Next in the line is CW Silverbolt. The famous G1 Aerialbot leader is finally getting a modern upgrade! Yeah, there was an Ultra Class figure released around 2008 (and later repainted into Skyfall). But that figure did not combine, so he was never a true Silverbolt in my opinion. The CW Silverbolt is a G1 homage through and through. In both jet and robot modes, he looks accurate to his G1 self. Transformation may be a tad simple for mature collector, but is still leaps and bounds more involved than the Ultra Class figure (which in my opinion was one of the simplest figures ever made, especially considering something of this size). In combined body mode, this figure really shines. The body mode looks good, is G1-accurate, and provides good mechanics as the center of a giant robot. He connects easily to other limb components, and mechanically well-serves the weight distribution challenges of a combiner. I guess one can always say that the jet mode has too much bulk on the underside, but all combiner jets in this history of TF has had that problem. Overall Silverbolt is a great figure. No wonder this figure is repainted into Cyclonus and Scattershot later.

CW Thundercracker is just a repaint of Thrilling 30 Starscream, while CW Windcharger is a repaint of Thrilling 30 Tailgate. So I won’t go into them too much.

CW Powerglide is a fun little figure. Both robot and jet modes are nice, and transformation feels adequate for a figure of this size. Powerglide is another figure where Hasbro has released an Ultra Class version. But true G1 enthusiasts will always think of Powerglide as a Mini-Bot, and so a legend class fig is much more appropriate. CW Bombshell is another welcome addition to this line. We already got Skrapnel (Shrapnel), so having Bombshell is a must (now I’m hoping they do Kickback). This Bombshell is a terrific figure in my opinion. Both modes are fun to play with. He comes together really nice in the beetle mode. Bombshell is my favorite Insecticon, so I am glad to see Hasbro give him a proper modern rendition.

Now onto the 3rd party purchases for the month. I still have not opened Military Titans as of this writing in April of 2016 (shame on me), so I won’t go into him. I did open ToyWorld Infinitor. This is an homage to Fortress Maximus, but a much more smaller and playable version. I never had the pleasure of the G1 Fort Max toy. There are re-issues out there, but he’s a huge piece that would take up way too much space for me. In the G1 cartoons, Fort Max is a city-size robot (like Metroplex). However in the comics, Fort Max is a large but ordinary size Autobot. I think that is what Infinitor is going for. Regardless, Infinitor is a solid, well-built figure. I can’t say for certain since I never had the G1 toy, but Infinitor feels essentially like G1 Fort Max shrunken down to playable size. He’s very blocky, like you would expect. The Headmaster gimmick is alive and well on Infinitor. He’s got the robot mode, a space cruiser mode, and 2 different city modes (though admittedly the 2 city modes look and feel similar). Overall I think this figure is ok. Get him if you like Fort Max, but not a must have in my opinion.

Finally, we are getting to the Masterpieces for the month. First up is MP Ultra Magnus, a figure that many fans have praised over and over. Some even go so far as to suggest that this should win figure of the year. Overall I think MP Ultra Magnus is pretty good. The alt mode could not be more G1. He scales well with other MPs in this mode. Transformation to robot mode uses the familiar scheme, but there are enough differences in the engineering to make him MP worthy. The robot mode of this figure is where I’m not as impressed. He’s still too blocky for me, and I was really hoping those brilliant Takara engineers could produce a robot mode that is more true to the G1 cartoon UM aesthetic. I hold MPs to a higher standard. Maybe figs like the MP-10 Optimus Prime set the bar too high, and I was expecting too much. Nevertheless, MP Ultra Magnus is a figure that is worthy of your collection. He’s not perfect in my opinion, but still something you should consider if you collect MPs or if you’re a fan of Ultra Magnus.

And last but not least, there is MP Bumblebee. This is a figure that gets no complaints from me whatsoever. We finally have in our hands the ultimate version of Bumblebee in all his G1 glory. The VW bug is nothing short of accurate. Transformation to robot is pure genius. And in robot mode, he looks like he jumped straight out of the G1 cartoon. Takara gave us another MP perfection in Bumblebee. He’s very well built and have amazing poseability. Oh, he also comes with Spike in his Exo-Suit, as seen in the 1986 G1 movie. This Spike figure is not bad, but I got this for Bumblebee, which is what I play with most of the time. If you could buy only one figure that I listed here for this month, get Bumblebee. You will not be disappointed.

That was a lot of TFs for one month. Things will slow down a bit after this. Til next time… Transform and Roll Out!

August is typically not a good month for finding new Transformers. In both 2012 and 2013, this month proved to be unproductive for TF hunting. Not so for 2014. Feast your optic sensors on all the goodies acquired August 2014.

• Generations Thrilling 30 Roadbuster, Target, $22.99

• Generations Thrilling 30 Sky Byte, Target, $22.99

• Generations Thrilling 30 Tankor, Toys R Us, $14.99

• Mastermind Creations Talon, CapturedPrey.com, $71

• Transformers Prime Beast Hunters Optimus Prime (Japanese release), amazon.com, $38

• Transformers Prime Beast Hunters Optimus Prime, ebay.com, $21.95

• Age of Extinction Lockdown, Toys R Us, $16.24

• Age of Extinction Bumblebee 2-pack, Toys R Us, $16.25

• Masterpiece Sunstorm, Toys R Us, $76.48

Let’s go over some stats first. 9 purchases for 10 figures total. 3 online purchases and 6 in-store purchases. 3 Generations figs, 3 AoE figs, 2 TF Prime figs, 1 MP fig, and 1 third party fig. 5 are Autobots, and 5 are bad guys from various factions (Decepticons, Predacons, Independents). Pretty good distribution overall.

The Generations Thrilling 30 figures were a pleasant find. In the previous months, there weren’t any TFs on store shelves other than offerings from Age of Extinction. So seeing something from my favorite TF lineup is a sight for sore optics. Roadbuster was one figure I have wanted Hasbro to release for some time now. The Wreckers are always fan favorites, and Hasbro’s Roadbuster takes it one step further to completing this lineup (here’s to hoping they will do Broadside). There has been some third party Roadbusters, but I don’t want to pay those kind of prices on every fig. Hasbro Roadbuster is a solid figure. I like both the robot mode and alt mode. Transformation is simple yet fun. Appearance wise, Roadbuster retains his unmistakable G1 look. He’s got weapons galore! He will give AoE Hound a run for his money.

Sky Byte are Tankor are characters that I do not recognize. Out of all my Transformers, I don’t have any figures that transform into sharks, and that makes Sky Byte one-of-a-kind in my collection. The shark mode is pretty good too. In robot mode, Sky Byte could pass for a G1 Pretender Shell. Not exactly my cup of energon, but I can see some fans dig this. I am not at all familiar with Tankor. And no, this is not the Universe triple-changing Tankor that is a homage to Octane. This is a separate character, which I could tell you nothing about. This toy is… unique to say the least. He doesn’t particularly impress me in either mode. His appearance does not seem to fit into any of the TF continuities. This figure reminds me of an old 80s figure that I have. That figure is not a Transformer or a GoBot, but some other 3rd party line that was looking to cash in around the same time frame. I still have that figure at home somewhere. Maybe I’ll dig out that figure some day and compare it to Tankor in the future at some point.

The only 3rd party figure this month is MMC Talon, which is an homage to G1 Divebomb of the Predacons. If memory serves, I pre-ordered this all the way back in January of 2013. Back then I never even heard of MMC. All I learned was that some new 3rd party is doing Predacons, so I pre-ordered instantly. Talon was supposed to be the first figure released in that lineup. But then I heard that something less than perfect happened with the manufacturing of the wings, and MMC really wanted to get it right, so they delayed it’s release. Props to MMC for their dedication to perfection. I haven’t actually played with Talon that much. He comes packaged in robot mode. Transformation to bird mode is pretty simple, if I remember right. I had both Bovis and Fortis before Talon arrived, and Leo Dux and Tigirs soon followed Talon’s release. So when that happened, I quickly transformed Talon to arm mode to form the fearsome Feral Rex (aka Predaking)! As of this writing I still have them combined. I think I will separate them soon, and play with them individually some more.

This month I got two Beast Hunter Optimus Prime figures from TF Prime, both the Japanese and US release. You might wonder why I did that. Back in May of 2013, I bought the US version of the fig. I really like this fig. Both modes are nice, transformation is fun, and overall construction is sturdy. But furthermore, I bought this fig immediately after meeting the girl who would become my fiancee. I still remember that day well. We met at Starbucks and chatted for 3 hours. And in true TF geekness, right after I met up with her, I went to the nearby Walmart to hunt for TFs. That’s when I picked up this Beast Hunter OP. So yeah, this figure has sentimental value for me. Fast forward to July or August of 2014. I had the sword plugged into the right fist, which is a super tight fit. When I tried to remove the sword, the handle broke off from the sword, and now the handle is stuck in the fist. Apparently this is a common problem. My buddy Gemini had the same issue, and he had to heat up the fist to get the sword out. I wish I did that instead of trying to force the issue. Anyway, the fig is now imperfect. I don’t like any of my figs being imperfect, especially one that holds so much sentimental value for me. At first I looked at possible fixes. I know I can get a third party sword (which is better). But the handle is still stuck in the first, and there’s no way to remove it. And I can’t find any third party hands for this fig. So in the end I decided to bite the bullet and just get a new one. At first I got the Japanese version from Amazon. I chose this over the US version because of the more show-accurate blue sword, and to get the feeling I’m not buying the same thing again. But then I saw a US version of the fig on ebay for a good price, so I bought that too. I guess I went a little overboard.

The AoE figures this month are Lockdown and the two Bumblebees. After watching TF4 with the GF (before she was my fiancee) at the theater, she remarked I should get the black Lambo. Of course she was referring to Lockdown. At the time, I wasn’t even sure if Hasbro would make a Lockdown in the AoE Generations subline. But they did eventually. The figure is not bad. The vehicle mode is nice, but I feel it could have been more black instead of this weird brown/grey color. Robot mode is ok. Arms are a bit too long in my opinion. The deluxe Camaro Bumblebee is not too shabby, but it really doesn’t offer anything new after all the deluxe Camaro Bumblebees that have been made in the first 3 movies. He’s not the best construction-wise, though. I already broke off a shoulder piece that forms the front corner bumper. The little Bumblebee that came in the 2-pack is a repaint of the Generations Thrilling 30 Bumblebee. This Bumblebee is the one I featured in my last post.

Last but not least, there’s Masterpiece Sunstorm. He is a repaint of the new MP Seeker mold with absolutely no new additions or enhancements. This mold was only released twice previously in the United States, once as Thundercracker and once as Acid Storm. These two were Toys R Us exclusives, and Sunstorm also continues that trend. As Sunstorm, some fans have complained of construction issues, specifically that the wings don’t stay attached to the back in robot mode. But mine seems just fine. I have done enough gushing over this mold in the past, so I will not repeat that here.

OK… that was quite a lot of TFs. Next month it slows down. Can’t have this many figures every month, or I’ll go broke.

Transform and Roll Out.