Nearly six years ago, I made posts showing off my Grimlock Collection (alt mode and robot mode). I have acquired more Grimlock figures since then, especially in the past year. It’s high time for an update.

For this update I’m only including new G1 and direct derivatives of the character. That means no Grimlocks from the Movie-verse or Robots in Disguise.

These are the 3 Grimlocks I’m feature here:

• Fans Toys Grinder – This is a 3rd party MP Grimlock by FT. It’s the large one in the group.
• Mech Fans Toys Grmlock – A 4th party product, by MFT. This is the figure with the really silver paint job.
• Power of the Primes Grimlock – The only official Grimlock here. It’s the only one in the group with an Autobot symbol.

Dino Mode

Standard dino pose.

Me Grimlock king.

Doing their best Jurassic World impersonation, looking fearsome from the front.

Robot Mode

Grimlocks standing at attention.

Similar shot, different angle.

“Quick guys, look cool! Get into our synchronized action pose.”

Some quick thoughts about each of these Grimlocks:

Grinder: This is a terrific figure. Possibly the best Grimlock ever made. He is larger than MP-8, the official MP Grimlock. And so he scales better with the rest of the Fans Toys Dinos and the rest of the MP Autobots. MP-8 is simply too small by today’s MP scale (in robot mode MP-8 is about the same height as MP-10 Optimus), and Grinder addresses that problem more than adequately. FT made many mechanical improvements over MP-8. The transformation sequence seems much more intuitive. The figure looks good in both modes. Grinder is super solid, no construction issues whatsoever with clicky joints all over the place. My only gripe is that, in T-rex mode, from some angles he looks too much like Barney. I think it’s the dino head mold. Good thing FT does offer an alternate dino head for Grinder (sold separately). I will get it and hopefully that will make this the perfect Grimlock figure.

Grmlock: I touched on this figure back in this post. This figure is 4th party (read: knock offs of 3rd party products). I’m not sure which 3rd party figure they copied, but Grmlock is quite good. I love that silver paint. His transformation scheme is a bit different from the standard Grimlock paradigm that every TransFan is familiar with by now, but that’s not a bad thing. Grmlock hides the T-rex head into the robot chest as opposed to letting it hang on the back, and the way it’s done is actually pretty cool. This figure is super tight in all its joints – almost too tight. Your hands will hurt when transforming this guy. As for Mech Fans Toys, I have no idea who they are. Even this company’s name is a ripoff of Fans Toys (as far as I know FT and MFT are not related whatsoever).

PotP Grimlock: The only official product here, PotP Grimlock kinda pales in quality next to the other 2. He’s decent for a mass produced retail toy. And I’m glad that Hasbro is finally putting out a CHUG Grimlock in voyager scale that G1-ers would consider true enough to the original. But next to the other 2 here, PotP Grimlock very much indeed feels like a toy, while the other 2 are more collector items. I like the robot mode, but some may complain that the arms are too long. And in T-rex mode he appears a bit off, like his tail is too long. Part of the problem is that he is made to combine with the other PotP dinos in which he forms the body. This requirement puts a limitation on what the robot mode and alt mode could look like. Still, I like PotP Grimlock overall. He’s worth buying if you find one.

Go Grimlocks! Transform and Roll Out.
 

Much like June 2016 and March 2017, November 2017 is another month where the 3P products outnumber the official products. Well, sort of. In term of figure count, that number is up for debate. But In terms of purchase count, the number of 3P products win hands down. It’s not even close.

Let’s take a look at all the goodies.

• Titans Return Siege on Cybertron, bbts.com, $99.99

• Unique Toys Allen, bbts.com, $59.99

• MakeToys Contactshot, thechosenprime.com, $89.99

• MakeToys Despotron, thechosenprime.com, $69.99

• Fans Toys Phoenix, capturedprey.com, $210.00

Siege on Cybertron

The only official product purchased this month is the Siege on Cybertron set. This set is released in the United States as a Big Bad Toy Store exclusive. On the box, the set advertises that it includes 5 figures. They are:

• Magnus Prime (leader class)
• Tidal Wave (voyager class)
• Metalhawk (deluxe class)
• Pounce (legend class)
• Thunderwing (master class)

They are packed in the box as shown in the pic below.

Magnus Prime is obviously the big draw here. I missed out on Transformers Legends Super Ginrai (LG-35), a Japanese only release. I wasn’t paying attention, and thought that Super Ginrai is simply a Japanese repaint of Titans Return Powermaster Optimus Prime. Big mistake. Super Ginrai is generally regarded as a superior figure to TR Powermaster Optimus Prime by most fans. When I came out of my TF stupor and realized that Super Ginrai is something different entirely, it was sold out at everywhere, except for online dealers that were charging crazy markups.

It was around this time that BBTS announced that they would be releasing this Siege on Cybertron set. The set includes Magnus Prime, which is a very slight repaint of Super Ginrai. Furthermore, MSRP of Super Ginrai is $109.99, while Siege of Cybertron is only $99.99 and includes a bunch of other things. So I bought this set with no hesitation.

It’s now almost a year later as I write this, and I still have not opened this set. I took it out of the box (as pictured above), but all figures are still on twist ties. This whole set just looks so damn good in the package that I’m reluctant to take it out. I’ll probably remove Magnus Prime from the twist ties in the future, to check out this mold. And while we’re on that topic, I have no idea who is Magnus Prime. Maybe he was a previous Prime to Optimus, or maybe he’s some kind of enhanced Optimus. I could look it up on TFWiki, but I won’t. I’m gonna regard this figure as Optimus Prime.

The only other new mold in the set is Pounce. And when I say new, I mean that it did not previously have a mass retail release in the United States. Pounce is one part of a clone, the other part being his twin Wingspan. These 2 have not been produced since G1 (to my knowledge), so I’m glad they got a modern update. Unfortunately, this set only includes Pounce and not Wingspan. I would have to get Wingspan elsewhere.

The remaining full-size figures in the set are all repaints of something previously released. Metalhawk is a repaint of Triggerhappy, while Tidal Wave is a repaint of Broadside. They come with Titan Masters that are different from their respective repaints (more on this later). I really like the Triggerhappy mold, but Broadside is just so-so.

Siege on Cybertron advertises 5 figures. The last “figure” here is Thunderwing. I put that in quotes because this is just a Titan Master. It’s debatable if they should count as figures. If you choose to, shouldn’t this set be 8 figures then (the 5 listed, plus the heads for Magnus Prime, Metalhawk, and Tidal Wave)? And if you choose not to, then this set should only be 4 figures. Either way, the 5 figure count is misleading. I know I’m nitpicking here, but I think it’s important to get this right. Anyway, Thunderwing is supposed to be a huge Transformer, in the pages of both Marvel and IDW. All we’re getting here is the head of Thunderwing. I suppose HasTak can make the body later. But including only the head here and then advertising as having Thunderwing feels like a cheap inclusion. I don’t care that this Titan Master is exclusive to this set.

Again, I don’t have any of this open, so I can’t speak to the quality of any of these figs. But assuming they are as good as their repaint counterparts or Japanese versions, Siege on Cybertron is a good set to buy. At only $99.99, you are getting 4 full-fledged figures, plus 4 Titan Masters. As of this writing, the set is a bit marked up now. But it can still be found for around $120, which is still a good deal if you missed out.

Allen

The first 3P figure for this month is Allen, Unique Toys’ tribute to Springer. I did a quick review of Allen, so see that post for all the details. At only $59.99, it was almost a crime to not get this, if only to check it out. And I don’t regret it one bit. Yes, Allen is not the perfect 3P Springer. There are many other options now. And to my knowledge, none are perfect. Most fans seem to elect Fans Toys Apache as the best 3P Springer produced to date. But there are qualities to Allen that makes him worthy of your collection. He’s very robust and very playable. The transformation engineering is impressive, and all modes look good in my opinion.

Allen was purchased in the same order as Siege of Cybertron above. Buying together saves money on shipping. But you all knew that.

Contactshot

Contactshot by MakeToys is the first of three Black Friday purchases that I made from The Chosen Prime. This online dealer will feature MakeToys products at insane discounts every now and then. I’m guessing MakeToys have a close working business relationship with The Chosen Prime, if the figs can be offered at such low prices. I got Contactshot for only $89.99, way less than its MSRP of $139.99.

Contactshot is an homage to Pointblank, a Targetmaster that came around in G1 Season 4. You don’t need to be too hardcore in G1 to know about Pointblank, but at the same time he’s not a character that casual G1 fans would know about. He was one of the better G1 Targetmaster toys produced when this line was first introduced. His Nebulos gun partner is Peacemaker. In the US G1 cartoons for Season 4, Pointblank made some appearances in the three episode arc “Rebirth”. This was such a short season that none of the new characters were given enough screen time. My understanding is that, in the Japanese continuity from Season 4 onwards, Pointblank is given much more detailed treatment. However I know next to nothing about the Japanese continuity, so I cannot confirm nor deny that assertion.

Truth be told, I had a feeling that Contactshot would become a Black Friday sale item. As a character, he’s not that well known. Fans have been saying Contactshot is a quality piece, but nothing that puts it in the groundbreaking territory. The regular price point of $139.99 is a bit much for fans with no familiarity of the character. Contactshot wasn’t exactly flying off the shelves, so I had a hunch he would go on sale for Black Friday. And I was right! When I saw that The Chosen Prime was letting him go for $89.99, I ordered with haste.

I have played with Contactshot for a while now, and transformed him twice to alt mode and twice back to robot mode (including breaking a piece, but more on this later). I agree with the consensus of the TF fandom: Contactshot is a pretty good figure, but not so good that it’s a must get if you don’t know the character. But first let’s take a look at Contactshot in the package.

Contactshot comes in a pretty small box, and he’s sandwiched between standard fitted clear clam shells. It’s a no-frills packaging, and it works. However, if you’ve paid MSRP, you might make a case that the packaging needs to be more elaborate. He comes with his Targetmaster partner Peacemaker, an accessory that doubles as a vehicle top-side spoiler/thruster and robot arm cannon, one extra helmet, and two extra face plates. The extra helmet and face plates are for if you want to create a G1 toy accurate look, or the G1 Japanese continuity look.

In your hands, Contactshot feels solid and weighty. It’s clear that good materials are used for the figure. Most of it is high quality plastic, with bits of diecast added here and there. Articulation is pretty good in robot mode. He can be put into some fairly dynamic poses, and the figure’s construction is solid enough that he can hold the poses. Transformation to alt mode is satisfying. Some of it is fairly straightforward, while other areas can be somewhat frustrating. The leg transformation to alt mode can be a bit annoying. It’s fairly obvious what you need to do, but actually doing it takes some work. I do like the look of the alt mode though. Pic below.

This is a very true representation of Pointblank in alt mode. I don’t remember seeing Pointblank in this mode in the Season 4 US Cartoons. But if you’re comparing to the original G1 Pointblank toy, Contactshot is spot on. The future race car shape and colors are all accurate. Even the iconic wings/spoiler on top of the vehicle is there. The Targetmaster can ride inside the cockpit.

If you have a thing for Pointblank the character, or if you like seeing modern interpretations of Targetmasters, then Contactshot may be for you. This figure is a solid toy. But at it’s usual MSRP, I feel that it does not offer enough as a toy alone.

I mentioned I broke off a piece of Contactshot on my first transform back to robot mode. This was mentioned above, and also in a brief bit back in this post (scroll down to the part highlighted in yellow). It was my mistake entirely. I kinda forgot how to properly do it, and just tried to force it through. Big mistake. One of the red pieces on the side of one chest broke off. This was about 4 months after the purchase. I reached out to thechosenprime.com, and they were able to contact the manufacturer and send me a replacement piece! That made me really happy. I want to give them a big shout out again here. There are other online TF retailers that can’t or won’t do this (I’m looking at you, TFSource!). Thechosenprime.com is now my go to retailer for anything 3rd party or MP.

Despotron

The 2nd Black Friday item acquired from The Chosen Prime is MakeToys Despotron, their stab at a MP Megatron. Despotron was released before the 2nd official release of MP Megatron (MP-36). At the time of Despotron’s release, there were already other 3Ps in the MP Megatron game. Some stiff competition included Apollyon by X-Transbots and Mightron by DX9. It was kind of up to individual taste as to which of these 3P Megs was the right one for you. None of the three were perfect. They each have their pros and cons.

MP-36 was released after all these Megs. It is not the perfect Megatron either. But for the most part, fans seem to agree that MP-36 is slightly superior to all the 3Ps. This may simply be that MP-36 is the official product, and, rightly or wrongly, official products carry more weight in the TF fandom just by being official.

After MP-36 was released, demand for all these 3P Megs went down. I predicted at least one of the 3P Megs would go one sale for Black Friday, and once again my TF hunch was right. Though I didn’t think it would be Despotron, and I certainly didn’t think the price would come down this much. MSRP of Despotron is close to $150, and on this Black Friday it went down to $69.99! I wasted no time getting one, despite the fact I already had MP-36. Despotron was the one I wanted out of the 3Ps, before I knew of MP-36.

I studied many pics online and watched many vids of the 3P Megatrons, and what drawn me to Despotron is the way he looks and the way he transforms. In robot mode, you can see his proportions are somewhat different from the G1 TV cartoons. Despotron is a bit bulkier. Many have said that these proportions more resemble modern Megatron interpretations in the pages of Dreamweave and IDW. And some have said that this is a transforming version of Revoltech Megatron, which I do have. I personally feel that the G1 Movie Megatron had a bulkier frame than his cartoon counterpart. Despotron looks like someone that can go toe to toe with Optimus and then some. Take a look at some pics of Despotron in the box.

If you’re worried about that orange plug, don’t. It comes right out. In fact, it’s kinda loose that having it stay on takes more work.

As for transformation, I think Despotron wins hands down, even if you count MP-36. He has the cleanest transformation of all the MP Megs. He hides the gun bits the best in robot mode. He has the cleanest backside with virtually no gun kibble. And he’s actually fun to transform. This is a MP Megs figure that is not frustrating or overly difficult, and that’s saying a lot for a modern MP Megatron. With instructions, I got him transformed to gun mode pretty quickly on the first go, like less than 20 min.

I think he looks pretty spectacular in the gun mode. For a MP Megatron that’s fun to transform, Despotron is the clear choice.

Despotron does have his faults. The face sculpt is adequate, but I feel it is the weakest of all the modern MP Megs offerings. He comes with very little accessories when compared to the competition. All other figures come with silencer and shoulder stock attachment, which Despotron is glaringly missing. And considering that the MSRP was close to $150, that’s not good value.

All in all, I recommend Despotron, but only if you can find it at way less than MSRP like I did. He offers an alternate interpretation of G1 Megatron that feels very different from MP-36. Despotron is a fun transforming toy, something the MP-36 can make no claim whatsoever. I really want to do a review of this figure in the future.

Phoenix

I have saved the best for last. Ladies and gentlemen, I give you… drum roll please… Phoenix!

Let me make this clear: Phoenix is the ultimate interpretation of a MP Jetfire. Other companies have tried, with varying levels of success. I don’t have any of those other figures, and I don’t need to. Fans Toys have outdone themselves again and hit this one way out of the park. Phoenix is G1 Jetfire materialized as a masterpiece figure. I can yap on and on about how great he looks, but I’ll let the pics below do the talking.

FT Phoenix robot mode.

FT Phoenix jet mode.

FT always look very carefully at the G1 animation models and then produces figures that match that look. Phoenix is no exception. In both modes, he looks like he stepped straight out of the G1 cartoons. But what’s more important is that Phoenix bears no semblance whatsoever to the original Takatoku Valkyrie toy that is the original G1 Jetfire figure. In other words, Phoenix is entirely based on the cartoon designs of Skyfire.

Transformation of Phoenix is actually not terribly complicated, for something so massive and easily integrates itself into the MP line. I’m almost tempted to say it’s simple, but there is enough going on in the transformation to keep most TransFans interested. All modern Jetfires have been on the easy side in terms of transformation. Classics Jetfire and Generations Thrilling 30 Jetfire comes to mind.

Construction and build quality of the figure is on par with everything that FT has produced to date. And if you’re wondering what that means, it means that it’s freakin’ awesome! All joints are nice, tight, and clicky. No dangling pieces or loose limbs. A jet mode that feels and plays like a cohesive whole.

Look at the pics below for scale with some other MP Autobots. Some argue he’s a tad too big, and I could see their point. But I just love this figure so much I’m willing to look past it.

FT Phoenix with MP Smokescreen, MP Red Alert, and MP Inferno.

FT Phoenix with MP Sunstreaker, MP Sideswipe, and MakeToys Gundog.

As for accessories, he comes with his gun (also modeled after the G1 animation model and not the Takatoku toy gun). FT gives you two removable chest plates where the faction symbol would go. So you can do one as Autobot and one as Decepticon, and reproduce that famous G1 scene where he switches allegiance. Very, very cool. The jetpack is not removable, and is a permanent (albeit transformable) piece as part of Phoenix. I don’t remember if he comes with other accessories, but I intend to do a full review soon and I’ll revisit this then.

Phoenix gets the highest possible recommendation from this TransFan.

I mentioned that I made 3 Black Fri purchases. The third one is MakeToys Ironwill, their interpretation of Hardhead. He won’t arrive for a while, so he’s not featured here. But he will get his 15 minutes. Until then… Transform and Roll Out.
 

I have previously reviewed these awesome faction rub on decals for your Transformers. Today I’m gonna show off some more pictures of them being used on my 3rd party and 4th party transforming figures.

Kubianbao MP-10V Optimus Prime – white backing
 

Mech Planet Hot Soldiers Bumblebee – clear backing
 

Fans Toys Mercenary – clear backing
 

Transform and Roll Out.
 

Only 2 Transformers were purchased in July of 2017. This is the lowest purchase count in a month since March of 2014. But what was lacking in quantity, this month makes up for in quality.

• Titans Return Seaspray, Walmart, $9.84

• Fans Toys Stomp, thechosenprime.com, $199.99

I already reviewed Titans Return Seaspray. He’s a terrific little figure that all G1-ers need in their collection.

Now let us focus on Stomp, a 3rd party Masterpiece interpretation of Dinobot Sludge. Stomp is produced by Fans Toys, and Fans Toys is probably the highest regarded 3rd party toy company in the TF fandom. And I’ll get straight to it: Stomp is an awesome figure! FT hit this one out of the park and delivered a MP Sludge figure that exceeded all expectations.

Stomp is the 4th Dinobot figure I have from FT. FT calls this line of figures the Iron Dibots. The first one I got was Scoria, their tribute to Slag. Scoria was pretty good for it’s time as the first MP style Dinobot by a 3rd party. But it is kind of lacking by today’s standards. And from a build and engineering perspective, Scoria was not without its issues. Many have complained about loose shoulder joints. Mine is ok, but I don’t like how Scoria’s hip joints droop down when the figure is picked up, because the weak hip joints cannot support the heavy die-cast legs. Next I got Sever (Snarl) and Soar (Swoop). These 2 were much better. I hold both of these in very high regard, close to TF perfection. Now I’m happy to add Stomp to the mix.

Like I mentioned already, Stomp is awesome, like his brothers Sever and Soar. Stomp deserves a review of its own, but I will mention here some quick points on why you need Stomp in your collection.

• Look great in both modes! Robot mode is well proportioned, and dino mode is large and intimidating.
• G1 accurate transformation. Sometimes 3P takes too many liberties in the way a figure transforms. I give that points for creativity, but some may consider it straying too far from the original source. Stomp’s transformation scheme is identical to that of G1 Sludge. Obviously it’s implemented with modern day engineering, which takes me to my next point…
• Solid build and engineering. It seems that FT took all the lessons learned from the previous FT Iron Dibots, and improved on their design choices in how Stomp is constructed. The drooping hips/legs issue I mentioned for Scoria, none of that applies to Stomp. There is a spring tabbing mechanism that locks Stomp’s hips into place in robot mode. So despite the heavy legs, no drooping occurs. Bravo Fans Toys!
• Quality materials used for the figure.
• Comes with working LED blaster and sword.
• Premium paint job.

There are other pros about the figure, but I’ll stop here. Check out some pics for yourself.

Stomp comes packaged in robot mode.

With his pal Soar.

Stomp in his awesome dino mode.

With his creator Wheeljack.

With ToyWorld Muddy.

Now I am debating if I should buy Fans Toys Grinder (Grimlock) to complete the set of FT Iron Dibots. I have MP Grimlock, but he’s too small when scaled next to the Iron Dibots. I can’t have have the leader of the Dinobots be the smallest one!

And I’m also considering getting the next evolution in Scoria, which is Perfect Fusion Cesium. As far as I know, Perfect Fusion is a spin-off sister company of Fans Toys. PF took everything wrong with Scoria, went back to the drawing board, and produced another version of MP-style Slag called Cesium that fixes everything wrong with Scoria. I am tempted to buy Cesium. However, in robot mode he seems to big. In fact, he is even a smidge taller than Grinder. For that reason I am hesitant. At $139.99, Cesium is a bit cheaper than the Iron Dibots (usual MSRP is $199.99). I may get him. Or not.

Transform and Roll Out.
 

Many of my 3P figures use faction stickers that are independently purchased. I have used both official (such as Ocean Designs) and unofficial (such as TOYHAX) stickers. For the most part they do the job. But once in a while I wish they could be better. Take MakeToys Gundog, for example. The figure is seen in last month’s post with an Autobot faction sticker applied. It looks ok, but it can certainly be improved.

My buddy Gemini recently introduced me to rub on decals of faction symbols. He got some and was super impressed with the results. This I had to see for myself, so I got some too.

The sheet of decals appears below. I forgot to take a pic of mine before I started using them, so here I’m using the pic that Gemini took of his.

The full sheet is pretty big, about the size of a standard 11″ by 8.5″ piece of paper. They decals are organized into 3 sections. Decals across the top section are all clear backing, and across the bottom section are all white backing. Those in the middle section is a mix of clear and white backing.

Notice on the left hand side are some Hasbro logo decals. I used these for practicing before I really applied one. Not sure why anyone would want to put Hasbro logos on anything.

I peeled off the Autobot sticker on Gundog and applied the rub on decal. The results are amazing! He looks way better. After application, they have a slight 3D look to them, as if they are engraved or molded on. Very very cool. Take a look at the pics below of some 3P figures using rub on decals.

MakeToys Gundog – clear backing
 

Fans Toys Sovereign – white backing
 

DX9 Gewalt – white backing
 

It does take a bit more skill to use these decals, though. Lining up the faction symbols so they are in alignment can be tricky. Often times, your first try can be off center, in either position or rotation. They also don’t peel off easy. I don’t know of an easy way to get them off once they’re applied.

Despite these negatives, using rub on decals are still the way to go. They look many times better than stickers. I highly recommend them for use with your 3P Masterpiece style figures.

Transform and Roll Out.

 

Some impressive figures arrived in March. And like June of last year, this is another month where 3P products outnumber official products. Is this a new trend among hardcore TF collectors? Only time will tell. But for now let’s focus our optics on the goodies below.

• Titans Return Sixshot, Toys R Us, $46.99

• Masterpiece Grapple, hlj.com, ¥11200 (about $102.72)

• MakeToys Gundog, thechosenprime.com, $79.99

• Fans Toys Mercenary, thechosenprime.com, $82.99

• Warbotron Air Burst, bbts.com, $71.19

Sixshot

Let’s first take a look at Sixshot. This is an official Hasbro update of the character. There was a time when I was really hoping for Hasbro or Takara to do their modern interpretation of Sixshot, something I have expressed all in way back in 2009. This became reality 8 years later in 2017. However, one third party beat them to the punch. I featured MMC Hexatron in a previous post. I bought the figure in 2014, but I believe he was released in 2013. So Hasbro/Takara is late to the party. That kind of took some of the hoopla out of Sixshot’s release now. And fans will undoubtedly compare Sixshot to Hexatron.

I will say this now: Sixshot is not as good as Hexatron. If you want a MP scaled Sixshot with better construction quality, more detail, and superior transformation, Hexatron is the way to go. When the two are compared side by side, Sixshot feels like the toy while Hexatron feels like the collector’s piece. But this doesn’t mean that Sixshot is a bad figure in any way, shape, or form. I will outline some of the pros and cons of Sixshot below.

Pros:

• At only $46.99, better value over Hexatron
• There are some specific areas of Sixshot where the engineering has pleasantly surprised me, not many of these areas though
• Comes with a Titan Master (or Headmaster) figure, though hardcore G1 purists will argue this is a con
• In each of the six modes, there is a different place to store the Titan Master

Cons:

• Detail not as good as Hexatron
• Engineering not as good as Hexatron
• Scale may be an issue; too big for CHUG, and too small to be MP

I would say that if you already have Hexatron, you may want to skip Sixshot. But if you don’t collect 3P products, or if you’re just a completist, then by all means pick up Sixshot. He’s a perfectly solid figure with no severe shortcomings.

Grapple

The only other official product this month is MP Grapple. Grapple is a repaint of MP Inferno, which was purchased last month. To this day I still have not opened Grapple. I have been meaning to, but I just haven’t got around to it. I’m gonna trust that he’s as good as Inferno. In fact, some fans have said that he’s better. I’m told that Takara reworked enough bits on Grapple that he feels like a different figure. I can’t confirm nor deny that. I will open him soon and see for myself.

Gundog

Let’s now turn our attention to the 3P products of the month. But first, I want to mention a new online TF retailer that I decided to try: The Chosen Prime. I have bought from them before, though it was through Amazon, for a legend class Acid Storm. This month is the first time I ordered from them direct. And let me say this: they have surpassed all my expectations! The items were carefully packed and delivered on time. There was a mix-up about how I wanted the items shipped, but a short email to their customer service quickly resolved the issue. Since then, they have become one of my trusted go-to stores online for collector grade TFs. Bravo Chosen Prime!

First item from Chosen Prime is MakeToys Gundog, their tribute to G1 Hound. Hound needs no introduction. He got significant screen time in the first 3 eps of G1, “More Than Meets The Eye”. It looks like he was gonna be best friends with Spike, until later Bumblebee took that role. Hound is perhaps best known for his hologram projections, which he used to fool Decepticons time and time again. As a G1 toy, Hound is memorable as only one of a few Jeep type vehicles in all of G1. As of this writing, there is still not an official Masterpiece update of Hound. So it’s left up to third parties to step up to the plate.

There are currently two flavors of 3P Hound: MakeToys Gundog and Fans Toys Willis. I looked at the pictures over and over, and considered which one I wanted to represent my Hound. In the end I went with Gundog. I won’t bore you all with what went into this selection process, but suffice it to say it was not an easy decision. They both have their pros and cons. It comes down to mostly aesthetics. Gundog represented the G1 toy a bit more and that won me over.

I am very happy with Gundog. I opted for the cartoon accurate green version (over the toy accurate dark green version). He comes packed in robot mode. The details in the head mold is excellent, and the design is unmistakably Hound. He’s got enough articulation to satisfy those fans who like dynamic poses in their figures. I do have two small gripes about the robot mode. The legs can appear a bit thick. And the upper portion of the figure does not appear to be able to snap in with the lower half, resulting in a figure that like to bend forward at the waist when it’s being handled.

Gundog’s transformation is one of the most ingenious that I have seen in recent years. The arms have this very original unfolding mechanism that flats out into the base of the Jeep. I love Gundog in the alt mode and I find no weaknesses in this mode whatsoever. He rolls fine on a flat surface. Gundog comes with many accessories, and in alt mode is where all these accessories truly make an impact. Below I have some Minions cruising around in Gundog.

Mercenary

Next up is Fans Toys Mercenary, also purchased from The Chosen Prime. I had already committed to the Fans Toys Insections, starting with Grenadier (Bombshell). By March of 2017, it was getting difficult to secure purchases of the Fans Toys Insecticons. Most hardcore fans seem to agree that FT does the best 3P MP-style Insecticons, and these figures were selling fast. When I saw that Chosen Prime had a copy of Mercenary remaining, I quickly jumped at it.

As you can no doubt see, Mercenary is Shrapnel, unofficial leader of our favorite robotic insect pests. Fans Toys did a remarkable job with this figure. He looks cartoon accurate in both modes, and in bug mode he feels G1 toy accurate as well. These FT insects may be small, but they got some heft to them. The weight and feel seem to suggest that some diecast parts are used. Transformation follows the same overall G1 motif for Sharpnel. However, there are some minor mechanics that you should watch for if you decide to get this figure and transform it. Also, since there are diecast parts, transformation can be more difficult than you might expect. It’s hard for me to explain this in words, but transforming and manipulating diecast takes more effort than plastic. But don’t let these annoyances stop you if you want MP style Insecticons in your collection. Shrapnel looks fantastic. The beetle horns are painted an excellent silver chrome (unlike the FansProject Insecticons, which came with a dull grey and had to be custom painted silver). He scales accurately with other MP Decepticons. Construction of the figure is solid. All these positives are wrapped up in a package of around $80. You will not be disappointed with Mercenary.

Air Burst

The final entry of the month is Air Burst. It’s also the final piece that I needed to complete my Warbotron Combaticons. Ironically, Air Burst (aka Blast Off) was the first figure released in the Warbotron line. Back in G1, Blast Off was my first Combaticon purchased. So why did I get all the other Warbotron figs first? All the Warbotron figs were already released when I started buying them. I was recommended to go with Sly Strike (aka Swindle) first, since many fans have voiced that he’s the best one of the bunch. And also because I found him at a good sale. Then my wife got me Whirlwind (aka Vortex) and Heavy Noisy (aka Brawl) as gifts. Fierce Attack (aka Onslaught) was found at a sale shortly after. And this leaves only Air Burst. I actually found him at a sale too, and got him sometime late in 2016. I held back on shipping him because I thought I was gonna get more items. As it turns out, I didn’t. So I waited to ship him all the way til March of 2017 for nothing. Super bad planning on my part.

I thought I was going to be disappointed with Air Burst, since many fans have expressed dissatisfaction of sorts. I’m not sure what everyone’s complaining about, because I love the figure! Just to be clear, I got V1 of this figure, and not the supposedly fixed V2. (Sidebar: Earlier releases of Fierce Attack comes with V2 parts, but unfortunately I was not aware of that and got a later release that doesn’t 🙁 ) I don’t detect any issues to have a crying fit. I love both the alt mode and the robot mode. I love the way he transforms – simple enough to be fun but complex enough to be satisfying. I have no issues with his appearance. He’s very G1 accurate as far as I’m concerned. Warbotron figs are known to have minor tolerance issues, but I detect nothing of the sort on my Air Burst. The arm connection mechanism for the combined mode is what is supposedly fixed for V2. I dunno, I combined Bruticus with my V1 Air Burst and everything seems fine. I guess my only gripe about Air Burst is that there’s a bit of puzzle forming, in that the rear thrusters form the arm cannons. I would have liked to see the thrusters incorporated into the transformation and be parts in robot mode, but it’s something I can live with.

Now for some group pics. Air Burst looks great with his fellow Combaticon cohorts. Check it out!

Now that the team is complete, it’s time combine! Combaticons, transform and merge into Bruticus!

I love this combiner set. Warbotron did justice to my favorite combiner team from G1. I have absolutely no regrets with buying this set for my MP styled Combaticons. I know there are some newer 3P offerings coming for the Combaticons. But only time will tell if any of the newer sets are hands down superior to Warbotron. For now, these are my MP Combaticons.

One last thing: the boxes for each Warbotron fig can combine and form a giant piece of artwork. It’s kinda cool. Check out the pic below.

Below are some extra pics of the three 3P figs this month in their alt modes.

That wraps it up for March of 2017. Until next time, Transform and Roll Out!
 

I have a lot of Transformers. I do play with them, and I try to be as careful as I can be when transforming them. But when you have as many as I do, you’re bound to break some. Occasionally the figures come broken (yes this has happened). Sometimes an inherent flaw in manufacturing or design lends the figure to breaking after only a few play.

Below are 10 of the figures from my collection where something has occurred to render them less than perfect. My heart breaks every time one of my Transformers breaks. Read on and see if you have mishandled any of these 10.
 

Brawl (Leader Class)
Series: Movie (2007)
Allegiance: Decepticon
Function: Ground Assault
Mode in Package: Robot
Known Redecos: Movie Deep Desert Brawl
Status: Returned to store; got replacement

The Figure:
Movie Leader Class Brawl is one of only few Leader Class figures I have from the entire Movie-verse. I highly recommend him. The robot mode is decent, but the tank mode is where this figure truly shines. He also has working lights and sounds, if that’s your thing.

The Incident:
First time I purchased this figure was from Toys R Us, and he was already broken out of the box. I documented this already, back in this post. There was a peg that came broken. It’s been more than 10 years now, so I don’t remember exactly which peg. But I think it was on the turret.

The Aftermath: I quickly returned Brawl to Toys R Us. I would have simply asked for a exchange, if they only had more of the figure. Since they didn’t, I asked for a refund and then bought it again on Amazon. And for cheaper too – looking up my old Amazon records, I re-purchased him for only $31.99! Can’t imagine getting a Leader Class figure for that price nowadays.
 

Samurai Prowl (Deluxe Class)
Series: Animated
Allegiance: Autobot
Function: Autobot Spy
Mode in Package: Motorcycle with Sidecar
Known Redecos: none
Status: Returned to store; no replacement

The Figure:
Samurai Prowl is one of the hardest figures to find from the Animated line. I was super thrilled when I found one on pure happenstance. He appeared on a TRU shelf when the TFA line of toys was officially over. I documented that purchase here and a review here.

The Incident:
I outlined how I damaged the toy in the review. Specifically, the connection between the motorcycle and the side car is broken. The whole thing happened in such a way that I didn’t even notice it when the breakage occurred. I have must broken it on the first transform from alt mode to robot mode, because I saw the breakage on the reverse transformation. I’m forced to think that connection must have been super brittle. However I haven’t seen any other documented cases of this, so it’s possible I was being too rough. Though that’s not like me at all – when it comes to my TFs I’m usually careful to a fault.

The Aftermath:
I wasn’t happy about the breakage at the time, and I don’t feel any better about it now. I returned the figure to TRU, because perhaps the TF OCD in me can’t stand to have broken figures in my collection. But like I said, this figure is hard to find. I only saw him one other time. It was at the dealer’s room at a BotCon. The dealer wanted $40 for it, and no way was I gonna pay that. Sad to say, I never saw the figure in store again. Checking on Amazon just now, the lowest price is around $100. In retrospect, maybe I should have just hung on to my broken Samurai Prowl, or spent the $40 at BotCon for another one.
 

Bumblebee (Deluxe Class)
Series: Animated
Allegiance: Autobot
Function: Autobot Speedster
Mode in Package: Car
Known Redecos: Elite Guard Bumblebee, Jetpack Bumblebee
Status: Damaged; got replacement

The Figure:
From one TFA figure we go to another. I got TFA Deluxe Bumblebee in a pack of 15 figures I bought used on Cragislist, something that I documented here. TFA figures as a whole don’t have the best construction. They often feel like cheap plastic cobbled together into a toy by ill-fitting ball joints. Bumblebee is a prime example of this. The alt mode cockpit pieces that form the back of the legs are connected by ball joints. One of them is too loose, and keeps coming off.

The Incident:
I tried to fix said loose joint by applying some nail polish to the socket. Unfortunately, I applied too much and now the ball won’t go in at all. So I guess you could say I broke this by trying to fix it.

The Aftermath:
I tried to buy another Bumblebee in store, but by then the Animated line was officially over. Online retailers were all charging a markup. Bumblebee is a mediocre figure at best, so I’m not paying markup for such a figure. Fortunately for me, I was able to get a Japanese version of this figure at a pretty good price, way less than whatever the MSRP was. That purchase was outlined here. The Japanese version is better anyway, with shiny chrome paint and slightly better construction. This is the figure that represents my Bumblebee in my TFA line. As for the “broken” Bumblebee, I keep him around for spare parts. He has come in handy, which brings me to my next entry…
 

Megatron (Voyager Class)
Series: Transformers United
Allegiance: Decepticon
Function: Decepticon Leader
Mode in Package: Robot
Known Redecos: Classics Megatron, Henkei Megatron
Status: Repaired

The Figure:
I am still not sure what exactly is Transformers United. It was a Japanese only line. As far as I can tell, Takara took a bunch of Henkei figures, repainted them, and released this United line. There was no US equivalent. Anyways, Classics Megatron was one of the first 6 figures produced in the Classics line. The line is significant in that it started an update of classic G1 characters in modern forms while still capturing the G1 spirit. As a figure, the design of Classics Megatron is questionable. He does transform into a gun, which all G1-ers love. But Classics Megatron fits the very definition of shell-former (think G1 Scourge). Also, his alt mode kinda looks like a futuristic Cybertron pistol at best, and a toy water gun at worst. The Classics colors also don’t help matters, and even I have to agree that the US version of the figure used some kid friendly colors that made Megatron look like a Nerf toy gun. And so I wanted a more G1 accurate version of this figure. I was at BotCon 2011, and saw a dealer selling the United version of this figure at a reasonable price. So I bought it.

The Incident:
I’m not in the habit of opening my toys at the convention. After I got home, I find that something is wrong with the transformation. I can’t get the waist to properly align correctly for alt mode. Upon closer inspection, I see that a part in the waist is installed backwards! The whole thing is assembled with a screw, so all you really had to do is unscrew the assembly, re-position the part, and re-screw. However, it took me sometime to figure all this out. And by the time I did, I totally mangled the head of the screw. Fortunately I got the screw out, but there was no way it could be used again.

The Aftermath:
In the last entry I mentioned I use TFA Bumblebee for spare parts, and he has a screw that kinda fits into United Megatron. I now use that screw to secure this part of Megatron’s waist. The part in question is only visible during transformation. The fit with Bumblebee’s screw is not perfect. Rotation of the part using this screw is quite loose. However, the loose rotation is only apparent during transformation. And the waist as a whole has other parts that lock it into place in both alt and robot modes. So I’m ok with this fix. I have made peace with the fact that my United Megatron is not perfect, but functional (que “I still function” from the G1 Movie).
 

Darksteel (Deluxe Class)
Series: Dark of the Moon
Allegiance: Decepticon
Function: ???
Mode in Package: Sports Car
Known Redecos: DotM Sideswipe
Status: Damaged; got replacement

The Figure:
Dark of the Moon Darksteel is not a character in the movie. I’m not sure if he has an appearance anywhere. Darksteel is another quick cash grab off an existing mold, in this case Sideswipe from the same movie. In all honesty, this mold is pretty cool. The redeco colors chosen for Darksteel is smashingly striking, and he does have a unique head mold that differentiate him from Sideswipe. I bought one when the figure was first released. I transformed him from alt mode to robot mode no problem.

The Incident:
Some months later I decided to transform him back to alt mode. It was late a night and I guess I was a bit too careless. Long story short, I bent one of the feet pieces the wrong way and broke it. I have transformed Sideswipe many times so I thought I knew the process, but I will admit that I don’t remember how TFs transform as well as I used to.

The Aftermath:
Some months after the first breakage, I went to shop at Kohls because they mailed me a $10 certificate, good for anything in the store. Most people don’t know this, but Kohls also has a toy section. Occasionally they will have Transformers. Anyways, on this particular trip, I find that they had Darksteel. They were already having a 10% off sale. And with the $10 certificate, the final price of Darksteel came to only $3.90. I documented that purchase here. To this day, I still have this 2nd copy of Darksteel mint in the package. I’ll probably keep this unopened. He’s not worth so much now, but maybe one day.
 

Optimus Prime (Voyager Class)
Series: Transformers Prime Beast Hunters
Allegiance: Autobot
Function: Autobot Leader
Mode in Package: Robot
Known Redecos: Beast Hunters Optimus Prime (with extra green armor)
Status: Attempting repairs; got replacements

The Figure:
You didn’t think I was gonna get through this list without having an Optimus Prime figure on here, did you? Hasbro makes so many Optimus figures that it would be weird not to break one if you collected as many TFs as I did. I really like Beast Hunters Optimus. The toy is a good size to play with. He’s got a fun and intuitive transformation, and the figure looks good in both modes. I’m not crazy about the head mold, and hardcore TFP fans love to point out that his sword in the show is blue, not green. Still, at less than $20, this is a terrific OP figure.

The Incident:
I have only ever broken one Optimus Prime figure, and it’s this one. It could be worse, like if I broke the MP-10. But like I said, BH Optimus is one of the better figures of the famous Autobot Leader, so I’m still a bit bothered by it. Also, this figure represents something significant in my personal life, as I have documented here. So it kinda pains me to see it less than perfect. What happened is I broke the sword while Optimus is holding it, so now the handle of the sword is stuck in Prime’s right fist. I felt the sword being stuck in the fist, yet I still tried to force it out. Not a good move. Though I’m sure it was a bad job with the tolerance that led to this. My buddy Gemini had the same problem. Only he was more patient and submerged the fist and sword in really hot water and pulled it out.

The Aftermath:
To compensate for this breakage, I went out and purchased more BH Optimus figures, documented in the same post. I got both the US and Japanese versions of this, so now I have two unopened BH Optimus Prime figures sitting in a closet. I’m glad I did, because they are now worth quite a bit. I still want to attempt a fix on my original figure though. I recently bought the 3rd party Blue Skybreaker Sword by Dr Wu that is way better than the sword that came with BH Optimus. Now I just need to get the broken sword handle out of Optimus’ right fist. If I can do that, I will consider this figure back in perfect condition. Maybe I’ll try Gemini’s hot water trick.
 

Bumblebee (Deluxe Class, part of TRU Exclusive 2-pack)
Series: Age of Extinction
Allegiance: Autobot
Function: ???
Mode in Package: Robot
Known Redecos: AoE Bumblebee, standard edition
Status: Damaged; no replacement

The Figure:
How many Deluxe Bumblebees did they make from the Movie-verse? Too many to count, that’s for sure. I got one Deluxe Bumblebee in modern Camaro form from each of the 5 movies. The one featured here is from the 4th movie: Age of Extinction. After a while, all these Bumblebees just kinda blend together. The later Bees became one giant yellow blur. I don’t remember anything special about this one, other than the two circular disc type weapons that he has. For AoE, I got the special TRU 2-pack edition. The package comes with the standard AoE Deluxe Bumblebee that’s painted a bit more orange, and a repaint of Generations Legend Bumblebee from the Thrilling 30 line. One of these days I should put together all my Deluxe Movie Bumblebees for a group photo.

The Incident:
One night when I was transforming AoE Bumblebee from robot to car, I broke off the this right shoulder piece. This piece becomes the front right area of the hood in alt mode. I don’t even know what happened exactly. The part just broke on me. I dunno, I might have forced something, or maybe the part was just weak. Movie toys usually don’t have the best construction to begin with.

The Aftermath:
I thought about buying another standard Deluxe AoE Bumblebee to replace this broken one. But my feelings about this figure is mediocre at best. I didn’t wanna pay MSRP, though I was never able to find another one at less than that. So chances are this figure will just remain broken, not getting replaced or repaired.
 

Bumblebee (Deluxe Class, part of Bumblebee vs Barricade First Encounter 2-pack)
Series: Movie (2007)
Allegiance: Autobot
Function: ???
Mode in Package: Robot
Known Redecos: Movie (2007) Bumblebee standard edition, Target Exclusive Evolution of Bumblebee 2-pack
Status: Damaged; no replacement

The Figure:
How many Bumblebees are we gonna have on this list? And why do I keep breaking them? This is the last one, I promise. This is the very first Deluxe Bumblebee released in the Movie-verse. This figure transforms into a classic Camaro, the car that Sam first owns for the first half of the original Movie (and still the best). All the initial Movie toys had this crazy gimmick called “Advanced Automorph Technology”, sometimes just Automorph for short. Basically, several parts of the figure will auto transform upon moving a single piece. This is usually done through spring-loaded action built into the figure. In the case of this classic Caramo Bumblebee figure, the hood will automatically fold down to form the chest upon doing something else (of which I don’t recall anymore). It sounds cool, but it really isn’t.

The Incident:
The problem with these kinds of physical gimmicks is that they’re prone to breakage, and that’s exactly what happened. Years after I owned this figure, I dug him out of a box in the closet. I usually keep my figures in alt mode. When I found him, I saw that the car’s front hood is folded down. I tried to fold it back up, but it won’t click into position anymore. This figure broke while it was in storage. Some plastic pieces broke off after years of holding Automorph spring pressure. I probably should have stored this guy in robot mode. Lesson learned.

The Aftermath:
I actually had another version of this figure as part of the Target Exclusive Evolution of Bumblebee 2-pack. I kept it new but then sold it later, before I found out about the breakage. I do kind of want another one of this Bumblebee, not because it’s a great figure, but for it’s significance as part of a toyline that crossed from animation into live action media. Not a priority though.
 

M-F-B
Series: N/A
Allegiance: Autobot
Function: N/A
Mode in Package: N/A
Known Redecos: None
Status: Damaged; no replacement

The Figure:
This isn’t technically a figure. This is a gun accessory called M-F-B by 3rd party MakeToys. Due to licensing reasons, they can’t call it what it is, which is My First Blaster. In the IDW line of TF comics, this is a weapon for smaller sized Autobots. Swerve is often seen holding the weapon. MakeToys made this accessory to go with their Swerve figure (called Trash-Talk).

The Incident:
I got this accessory in the hopes that it would fit the Generations Thrilling 30 version of Swerve. Turns out, it doesn’t. The handle for M-F-B is 3mm, while Swerve’s hands are for 5mm weapons. Also, I didn’t know this came as a model kit (or maybe I did, but then forgot). I’m terrible at building models. During assembly, I broke off one of the light green bulbs that go on top of the M-F-B. Total bummer.

The Aftermath:
The breakage is beyond repair. And since this actually doesn’t even fit Generations Swerve, and I don’t have Trash-Talk, there’s no point for me to hunt down another one. This M-F-B will stay broken.
 

Soar (Blue)
Series: N/A
Allegiance: Autobot
Function: Bombadier
Mode in Package: Robot
Known Redecos: Soar (Red), Soar (Red comic), Soar (Blue comic)
Status: Repaired

The Figure:
Soar by Fans Toys is an awesome homage to G1 Swoop. I have written about this figure already, so read all the details here. If you are collecting Masterpiece style figures and you need to round out your Dinobot collection, you need this figure.

The Incident:
Nothing was technically broken on my Soar. However, when I got the figure, it was missing the large vertical piece of the display stand that Soar sits on in dino mode. I couldn’t believe it! This is the largest piece in the package next to Soar itself. I love Fans Toys, but where was the QC on this?!

The Aftermath:
Capturedprey.com was gracious enough to hunt down a replacement piece of the stand for me. It took several months, but better late than never. I now have a fully completed Soar figure in perfect condition with all accessories intact. Thank you Capturedprey!
 

I do have more figures that are broken/damaged/missing parts, but these 10 will do for now. I’ll make another post when I have another 10. Hopefully that won’t occur. Though with the amount of Transformers I have, it’s only a matter of time.

What figures have you broken? Or come damaged or missing parts? Feel free to comment below.

Transform and Roll Out.
 

October has historically been a month filled with many TF purchases. That is not so in 2016. But there are some cool items this month, and one surprising trend that I didn’t notice before.

• Titans Return Powermaster Optimus Prime, amazon.com, $39.99

• Titans Return Apeface, Target, $4.99
• Titans Return Skytread, Target, $4.99

• Robots in Disguise Paralon, Toys R Us, $9.99

• Fans Toys Soar, capturedprey.com, $180

Like I said, October 2016 does not have a crazy TF purchase count, as was the case in 2012, 2014, and 2015. This October is more on par with 2013 with a modest number of TF purchases.

Let’s take a look first at Powermaster Optimus Prime! Growing up, I really wanted G1 Powermaster Optimus Prime. I know, the concept of a Powermaster is really lame. But all Powermaster figures were good toys, for G1 standards anyway. And back in the 80s, Hasbro was not in the habit of releasing 10 different Optimus Prime figures every year across all toylines and sizes. Believe it or not, Powermaster Optimus Prime was only the 2nd OP figure produced, after the original season 1 toy. It was already Season 5 when Powermasters rolled around, and us fans were all itching for a new figure of OP.

My cousin had G1 Powermaster OP. I played with the figure quite a bit. For G1 standards, this was an awesome figure. I tried to buy one back in the 80s, but didn’t have the money. Now nearly 30 years later, Hasbro is giving us a homage to the original Powermaster OP in the Titans Return line. In this case he’s really a Headmaster, but he’s still got his 80s Powermaster design and aesthetics.

The figure is a heavy retool of the wonderful Combiner Wars Ultra Magnus figure that I went into back in this post. Hasbro took that mold and reconfigured it to resemble G1 Powermaster Optimus Prime with modern stylings and updates. The result is quite nice, and I’m happy that Hasbro took the effort to give us true fans something to homage the Powermasters, even though the figure is not a ture Powermaster. The Titan Master (or Headmaster figure) transforms into Prime’s head in robot mode. The helmet of the head is part of Prime’s body, flipped out from the cab. We’ve seen this mechanism before on TR Galvatron.

Since this technically a repaint, I won’t comment too much more. But he is recommended. Below is a pic of the alt mode. Notice how similar the cab appears when compared with CW Ultra Magnus.

Next up are two Titan Masters figures. Hasbro makes a whole bunch of these. For this month I got Apeface and Skytread. Yes, these are small figures that transform to heads. And FYI, all heads are interchangeable for figures in the TR line. Meaning you can take the head for Blurr and stick it on Scourge, or any other combination you see fit. Why you would wanna do this is beyond me. And with these small Titan Master figures, you get extra heads to swap between figures to your heart’s content. I got Apeface because I liked the original G1 Horrocon (and I’m hoping Hasbor will give him a true modern update). Not sure why I bought Skytread. The small Titan Masters also have another alt mode, in addition to the robot mode and head mode. To this day I still have not opened Apeface and Skytread, but I did open some other ones (purchased in later months). These figures are mostly forgettable in opinion. Oh, in my TF count page, I specifically stated that I don’t count mini-figures, such as Targetmasters and Mini-Cons. So I’m not adding Titan Masters to the figure count either. I truly seem them more as accessories. But they will add to the purchase count, since I did have to buy them separately.

The only RiD purchase this month is Paralon. I dont’ even know who Paralon is, as my knowledge of Robots in Disguise is severely limited. I only bought him because I like the purple scorpion. Supposedly, this is a Toys R Us exclusive. And Paralon was released before Scorponok, a brown repaint of this figure. So this was another case where Hasbro gave a new mold to an unknown secondary character, and released the more famous character later. However, when I saw Paralon, Scorponok was already on the shelve too. I chose Paralon anyway because I liked the purple, and honestly, I don’t much care for Scorponok as a character. Anyways, the toy itself is just ok. Like I said, a giant purple scorpion is very unique. Transformation is kind of unorthodox too. The shoulder mechanism requires that you take parts off, but the part never really completely comes off as it still dangles on the arm. So does this count as parts-forming? Who knows. Get Paralon or Scorponok if you’re partial to either character. Most fans could probably skip these two. They’re not bad figures, but they don’t have much going for them either.

Last but not least… ladies and gentlemen… I give you, Soar! That’s right folks! This month we have yet another outstanding 3P Dinobot from Fans Toys. And this time it is our favorite flyer of the group, Swoop! For trademark reasons, FT can’t call this figure Swoop, so they went with Soar. Gotta give them credit from coming up with these creative names.

Soar is packaged in robot mode, like all the other FT Dinos so far. Right upon getting this guy out of the box, the first thing you will notice is that he weighs quite a bit. I think he’s actually heavier than Scoria or Sever. Size wise, he’s smaller than these 2 when you don’t count the wings, so FT packed a lot of heft into the core frame of the figure. This is already a plus in my book.

The robot mode is a sight to behold. I went with the cartoon accurate blue version (FT also produced a G1 toy accurate red version, and I had G1 Swoop as a kid, all broken today). Check out the pic below. It’s like Swoop stepped straight out of the show!

“Me Swoop no see nothing.”

Seriously, this is so cartoon accurate that I can’t gush enough. Everything from the colors to the proportions, it’s like FT looked very carefully at every single one of Swoop’s show appearance and faithfully constructed a figure out of what they saw. Construction of this figure is absolutely superb. All joints are of the ratchet variety, and every one of them is tight enough to support the weight of this heavy figure. Soar is capable of some nice poses. I had him in several action poses, but unfortunately I didn’t take any pics. Take my word for it. If dynamic posing is your thing, Soar will not let you down.

Soar comes with the two iconic G1 wing missiles, as you can see in the pic. Unfortunately they do not fire. He also comes with his sword, which looks just like what he had with the G1 toy. The sword is attached to his back in the pic above. LED lights are featured in the sword (batteries are not included, however). I can’t remember if I have ever seen Swoop use this sword in the cartoon. All these weapons can be held in his hand, or pegged where they are in the pic in robot mode.

Transformation to pterodactyl is fairly simple. Soar is probably the easiest to transform out of all the FT Dinos so far. The overall transforming paradigm is exactly what it was in G1: bird head and beak flip up from the chest, arms and chest collapse toward the middle, and legs fold up to the back of the bird. Obviously this is all updated with modern mechanical engineering. G1 purists should have nothing to complain about in the design of transformation. Check out the pterodactyl mode below.

This dino bird is absolutely amazing! I took a quick measure of the wingspan, and in the above configuration, the wingspan is close to 18 inches! Soar looks fantastic flying above all your other MPs in this mode. The wings hold their position fairly well. On my figure, one side of the wings is nice and tight, while the other side can be argued to be a bit loose. But it still holds up well in alt mode and it does not droop down, so it works well enough for me. Soar comes with an extra set of wings. The default attached wings are more chrome, while the extra wings are more metallic. I did not try the extra wings yet. Fans Toys have thought of everything. They really love you.

In alt mode, the missiles go where you expect them to go. I detect no storage location for the sword in alt mode, but that’s a minor gripe. The beak opens and closes. The beak joint is tight and I expect no less. The alt mode comes together nicely as one cohesive whole. All parts are tabbed into place where they should be. No dangling parts whatsoever. This is the Dinobot pterodactyl that the Autobots deserve.

Last but not least, Soar comes with this awesome display stand for the figure in alt mode. You can see it in the pic above. This stand is large and robust, with enough support for this heavy figure without any worries. Oh, my figure was missing the vertical piece of the display stand when it was first shipped to me. Props to capturedprey.com for contacting Fans Toys and shipping me the missing part. I have complete faith in this retailer and I will use them more in the future. Minor issues with Fans Toys figures are not uncommon, however. I have been lucky thus far, until Soar. Other fans have complained of missing weapons, missing accessories, non-working LED weapons, batteries that should have been included but are not, etc. These periphery issues seem to plague Fans Toy’s track record. So open your FT figures as soon as you get them. Most respectable retailers will work to make it right within the proper time frame.

I give Soar the highest possible recommendation. If you want a MP Swoop in your collection, look no further than Soar. Get one before they all soar off the shelf (bad pun intended).

The surprising trend that I mentioned at the top of this post is the trend of when I buy the FT dinos. Scoria was purchased in October of 2014, and Sever October of 2015. And now Soar in October of 2016. So it looks like I buy one FT dino every year, and at October. I doubt this trend will last though. I have the 2nd release of Stomp (Sludge) pre-ordered, and he’s set to arrive June or July of 2017. But who knows… maybe he will get delayed til October. I hope not. I heard excellent things about Stomp.

More TFs are to come in the months that will end 2016. Until then, Transform and Roll Out.

 

My fellow TransFans, June of 2016 is a historic month! For the first time in the history of this blog, I have acquired more 3rd party items than official Takara/Hasbro items! I think something like this phenomenon was brewing for a long time now. And it finally happened. I’ll comment more on this later, but for now let’s take a look at the figs for the month.

• Combiner Wars Groove, bbts.com, $24.99

• ToyWorld Iron Dreg, bbts.com, $91.99

• Fans Toys Grenadier, bbts.com, $82.99

• Spark Toys Alpha Pack, gift

• Warbotron Heavy Noisy, gift

First let’s look at the lone offical Hasbro purchase and get that out of the way. Combiner Wars deluxe Protectobot Groove is a shared exclusive between Amazon and some of the bigger online TF retailers. This figure is not to be confused with the legend size Groove released in 2015, which is available in mass retail. I have wrote about this before, and it’s worth stating again. For the Protectobots, Hasbro gave us deluxe Rook instead of deluxe Groove. I can only guess that this is a cheap ploy to sell more figures. Those of us that are hardcore G1 had to buy deluxe Groove the hard way. Boo Hasbro.

Deluxe Groove on its own is not a bad figure. Both modes look solid, and at first glance there’s not much to complain about. I’m fairly certain he’s a new unique mold, but he feels awfully similar to the other CW limb components. The toy itself feels quite cheap, but all CW deluxe figs share that flaw. The only real reason to get this fig is for hardcore G1-ers to complete the Protectobots with the right characters in the right scale. Below is a pic of CW Defensor formed in the proper G1 configuration.

Now onto the good stuff. First on the agenda is ToyWorld Iron Dreg, their tribute to Dinobot Slag. I believe this figure was bought back in the March of 2016. At the time, I already had Roar (Snarl) and Corelock (Grimlock), and I was so thoroughly impressed with those two that I vowed to complete the TW Dino set. So when I saw Iron Dreg at a discount in March, its purchase was a no-brainer. He wasn’t shipped and received til this month, because I wanted to ship the stack out along with Grenadier and Groove.

As of this writing now in February of 2017, I have 4 of these Dinos, the only missing one being Spear (Swoop). Though I gotta say, out of these 4, Iron Dreg is the weakest figure. I love the dino mode. It is a good modern update of Slag as a powerful metallic triceratops. The transformation and robot mode is where this figure falls a bit short in my opinion. The overall transformation schema is very close to how Slag transformed in the G1 toy. The only noticeable difference is having the rear dino legs fold inside into the lower legs in robot mode, a common motif among all modern interpretations of Dinobots. There are other minor differences, but nothing that really sticks out as a significant mechanical enhancement to the figure. Hardcore G1-ers would probably appreciate this close resemblance to what came before and see this as a plus. Normally I would wholeheartedly agree, but in the case of Iron Dreg, I feel there’s not enough updated from the G1 toy. As a CHUG update, I feel like a modern figure needs to move the toy forward in terms of engineering. It’s one thing to update aesthetics (something that fans passionately debate over), but it’s quite another to update mechanics. Everything feels too familiar. Don’t get me wrong, Iron Dreg is still a decent update of how Slag would be today. But when compared to ToyWorld’s efforts on Corelock, Roar, and Muddy (Sludge), Iron Dreg feels lazy. I guess it’s no accident that Iron Dreg was the 2nd to the last figure released in this team of 5. While we’re on that note, Spear is the last TW Dinobot released. I have read reviews that Spear is not that great of a figure, so I am debating if I want to spend around $100 to buy a bad figure, just to complete the set. First world problems – woe is me 🙁

As for Iron Dreg’s robot mode, I got the same gripe as its engineering – it feels too similar to G1. Again, Iron Dreg is still leaps and bounds superior to the G1 figure. It’s just that there’s nothing that wows me about this robot mode. All the updates that you expect to be there is there, but that’s all. TW most definitely did not go above and beyond with Iron Dreg, and the result feels like a minimally done update to Slag by 2016 standards.

I know I sound really harsh here, but I still recommend Iron Dreg if your aim is to complete the TW Dinobot set. As part of a team, he is solid enough of a figure that he warrants a purchase to occupy a space on your shelf. But as a standalone figure, I would say pass. There are other Dinos from TW that are way better. If you only wanted to get one Dinobot, you would probably get Grimlock anyway. Below is a pic of Iron Dreg in robot form.

Here is a link to the 4 TW Dinos I have thus far, in their dino modes. I love how the team looks together.

Let’s now take a look at a character that’s very dear to me: Bombshell. I have outlined how Bombshell is my very first official Transformer. And for that reason, I try to buy all the modern updates to the character. I have one set of G1 reissues, the FansProject update (as Stormbomb), and the recent Combiner Wars legend figure. I even have Hardshell, a spiritual update of the character in the TF Prime Beast Hunters line.

By the middle of 2016, many third parties have attempted MP interpretations of everyone’s favorite robotic insect pests. I read and watched some reviews, and the general consensus is that Fans Toys make the best MP Insecticons. And since Bombshell is my favorite of the 3, I bought Fans Toys Grenadier. I know many fans prefer the grey chest toon version of this figure. But I elected for the toy version with the purple chest, because that’s how the G1 toy was. I played with this figure over and over as a kid, and transformed him countless number of times that today this figure is in fairly poor condition. The G1 figure had a purple chest, and that’s what I remember, so I went for purple in Grenadier. And honestly, I didn’t even notice that Bombshell had a grey chest in the cartoon until very recently, when third parties started doing their MP Insecticons.

FT Grenadier comes packaged in robot mode. The first thing that you will notice about this figure upon taking it out of the box is that it’s got some decent heft to it! Seriously, Grenadier weighs more than most figures I own, and that’s saying a lot! Below is a pic. This figure is a wonderful representation of Bombshell in MP scale.

FT was smart enough to mold a design on Grenadier’s chest that’s a perfect fit for third party Decepticon stickers. Notice on my Grenadier I have a faction symbol on his chest, using stickers by Ocean Designs that I bought sometime in 2015. I love the look of Grenadier in robot mode. Appearance wise, he’s a perfect homage to Bombshell, and in my opinion he strikes the perfect balance between how he appears in the cartoon and how he should appear as a toy figure. He scales nicely with other MPs on the shelf. Grenadier has got some decent articulation, capable of some dynamic poses if you want to re-enact scenes of Bombshell in action.

Transformation to bug mode can be a mediocre challenge, but not for the reasons you think. As a rule, I think transforming plastic pieces is usually easier than transforming metal pieces. Transforming Grenadier, it feels like the whole figure is metal. I know that’s not true, but the figure has a fair amount of die-cast, and the plastic used is super high quality. While I applaud the materials used, transforming the figure becomes difficult. There’s very little wiggle room for error when such hard pieces on the figure are used, and thus the process becomes unforgiving. The tight joints also do not lend to an easy transformation process. However, all this is balanced out by the transformation mechanism being on the simple side, resulting in a figure of average difficulty on the challenge scale. In a nut shell, not a whole lot of steps in the transformation, and it’s obvious what the next steps should be. But performing the steps could take some work.

In beetle mode, Grenadier does not disappoint. He’s got the same weighty feel and robust construction that he has in robot mode. The appearance of the bug is tremendously faithful to his show likeness. Fans Toys even included a set of alternate legs for the bug mode. I’m not sure what they are for entirely. It’s possible that, in some episodes, Bombshell had legs that looked more like the alternate legs. I should have took a pic of Grenadier alone in beetle mode. Scroll down to the bottom of this post of Grenadier in alt mode in a group shot.

I highly recommend Grenadier. Here is a pic of Grenadier in robot mode with some of his Decepticon cohorts.

The next two figures are gifts from my wife. I have wishlists set up on my favorite TF retail sites, and she just looks at these when she buys me TFs as gifts. It’s always kind of a surprise which figs she would choose.

The first of these is from a new company called Spark Toys. They decided to do their take on a War Within Optimus Prime. Back in 2006, when it was only 2 years after I started collecting TFs again, Hasbro partnered with Galoob to release the Titanium line. The very first figure released in this line is a War Within Optimus Prime. In all fairness, that figure wasn’t bad. I liked both modes of that figure. The transformation, while simple, captured how a Optimus Prime figure should transform. The paint applications of the figure was solid. Where that figure fell apart is in the construction. The selling feature of the Titanium line is that they include die-cast parts. But they say die-cast construction is a lost art, and in the case of Titanium figures, it’s very true. Titanium OP had some of the worst joints imaginable in a TF. They could not support the weight of the die-cast pieces. The result is a figure that can’t hold any kind of pose, and picking up the figure yields a floppy mess of a Transformer.

Well, that was then. 10 years later in 2016, Spark Toys makes their attempt to do justice to War Within Optimus Prime, in MP scale no less. And since they are third party, the name they are calling OP is Alpha Pack. I’m glad to report that Spark Toys’ efforts is a success! The first thing you will notice about getting this guy out of the box is the spectacular paint job! I think of all the TFs that I have acquired, this guy may have the best paint job ever. The reds, blues, and silvers have this shiny and glossy metallic property to its appearance, and it’s great to see that the application is uniform across the figure. Front head lights and rear tail lights are all accented in bright yellow paint. The tires a made of rubber, and in vehicle mode, Alpha Pack rolls well on a flat surface.

Alpha Pack comes with 3 accessories: the famous OP rifle, an axe (not the energon variety), and their take on the Autobot Matrix of Leadership. In alt mode, Alpha Pack can carry the rifle in the top rear area of the truck. To do this, there is a nice little attachment handle that flips out of the rifle, and this can be hidden when Alpha Pack is using the rifle in robot mode. Very very cool. The Matrix can be comfortably stored in the front grill area (which becomes the chest in robot mode). But there is no room for the axe in alt mode.

Below are some pics of the alt mode of Alpha Pack. I love the look of Alpha Pack in this mode – he looks like he jumped straight out of the comics. I applied an Ocean Designs decal to him as well.

Below is a pic of Alpha Pack next to the awesome DX9 Carry (which I will go into next month).

Transformation to robot mode is not difficult at all. I’m going by all memory here, but in terms of the transformation paradigm and overall number of steps, it feels like the Alpha Pack is only slightly upgraded from the Titanium figure. The mechanics of how that’s achieved, however, is a vast improvement. Alpha Pack does not have any die-cast pieces as far as I can tell, but in opinion that’s a good thing. It makes for a more playable figure. And as far as transformation and poseability, not having die-cast poses less issues in these areas. Alpha Pack has nice joints to support the figure, but not having die-cast means it doesn’t need extra joint reinforcement to begin with.

Alpha Pack looks great in robot mode. The figure feels true to his War Within appearance. Look at the top banner of this blog for a pic of War Within OP if you are not familiar with that incarnation. The outstanding paint job shines in this mode as well. Some fans have mentioned that he looks a tad too bulky in robot mode. When standing next to MP-10, it’s hard to argue against that complaint. But personally, I kind of dig this bulky look. This is how a lot of the comic book artists choose to stylize Optimus Prime in his Cybertron days, and I am glad to see Spark Toys hold true to this design. Below is a pic of Alpha Pack next to the US Version of MP-10.

One gripe I have about Alpha Pack is the poseability. Because he is a bit on the bulky side, his range of poses are more limited. This is something to note if you are one of those collectors that love to display your figures in dynamic poses. But despite this weakness, I still highly recommend Alpha Pack. This figure has way more pluses than minuses, and if you are a fan of War Within or any of the modern G1 Transformer origin stories of their era prior to Earth, you should pick up this figure.

The other figure that I got as a gift from my wife this month is Heavy Noisy, which is Warbotron’s rendition of Brawl. This is the 2nd time that my wife has chosen to get me something from the Warbotron Combaticons (the first being Whirlwind, or Vortex). My wife knows nothing about Transformers. She picks out the figures on my wishlist based on appearance alone. She has always joked that she identifies more with the Decepticons, so perhaps she knows more than she’s letting on.

Heavy Noisy is the 4th figure I have in the Warbotron Combaticon line. I gotta say though, this one feels like the weakest out of the four so far. He’s still a decent figure, but something about him just don’t feel quite up to par with the other team members. Both modes are satisfactory. Transforming the arms into tank mode is a bit of a pain because they are so tight, and it’s even worse when you try to get them back to robot mode. I’m also not thrilled about the tank turret becoming a shield. It feels too much like puzzle forming in my book. But Heavy Noisy is not a bad figure by any means. He is solid enough to earn a place in your collection, and you still need him to form Bruticus. I’ll reserve my final thoughts for when I have all 5 members of Warbotron. As of this writing, I have purchased Air Burst (Blast Off). I should have him in hand soon.

Below I have a pic of all the 3rd party figures acquired this month in a group shot.

It’s quite a sight to see how far 3rd party products have come. I still remember my very first 3rd party figure, which was Defender by FansProject. Third parties have really stepped up their game since then. Most of the figures produced recently seem to be in really high quality. They rival anything that Hasbro/Takara has produced in the MP line, and blows away anything that you would find in retail store shelves. Third party products are not getting any cheaper, though. So many companies are getting into this game that I can’t count them anymore. Very often, multiple companies will produce their version of a particular character. As fans, I am glad I have so many options on something that Hasbro will not produce, but I also feel handicapped by all these options. Many studies have been done on the paradox of choice; that too many options can actually make a person unhappy. As for third party TFs, is too much of it presented to the buyer that decision paralysis is now an issue? I was gonna sum up my thoughts on this topic in a short paragraph here, but now I think this may deserve it’s own post.

June 2016 was a great month. So many great figures, by so many different companies. More to come soon… Transform and Roll Out.

Since I started tracking my purchases on this blog, October has provided no shortage of TF action in either figure count and/or spending. October 2012 holds the record for highest TF count in a single calendar month (at 24 figures), and October 2014 holds the record for most TF spending in a single calendar month (at $885.90.. yikes!).

In true October fashion, this month is also filled with TF purchases that are way above my average monthly tally. I don’t think October 2015 sets any new personal records, but there are a lot of figures here nonetheless.

• Combiner Wars Ultra Magnus and Minimus Ambus, amazon.com, $40

• Combiner Wars Ironhide, Target, $14.99

• Combiner Wars Prowl, Target, $14.99

• Combiner Wars Sunstreaker, Target, $14.99

• Combiner Wars Mirage, Target, $14.99

• Combiner Wars Cyclonus, amazon.com, $17.89

• Masterpiece Bumble G-2 Ver., hlj.com, $36.47

• Perfect Effect Perfect Combiner PC-05 Upgrade Set, tfsource.com, $32.99

• Before & After Omega Launcher for MP-17 Prowl, tfsource.com, $14.95

• ToyWorld Devil Star, tfsource.com, $119.99

• Warbotron Sly Strike, tfsource.com, $75.99

• Fans Toys Sever, tfsource.com, $179.95

Let’s start with Combiner Wars Ultra Magnus. This is hands down my favorite Ultra Magnus figure of all time! That’s a strong statement, considering I own almost all of them. I like this figure even better than Masterpiece UM, because the CW fig is less blocky and more playable. I have gone into details about this figure back in the post, so I won’t do it again. Minimus Ambus is a character I know nothing about. I believe he’s from the IDW-verse of comics, but I could be totally wrong here. The Minimus Ambus figure in this package is completely forgettable and adds nothing to the Ultra Magnus toy.

Below is pic of my two favorite Ultra Magnus figs of all time.

Combiner Wars continue with more figures that are very minor reworks of what’s already out there. In this month we get Ironhide, Prowl, Sunstreaker and Mirage. Hasbro really knows how to milk us hardcore G1 fans by tweaking existing molds very slightly and then releasing them as popular G1 characters. I probably could have skipped this foursome altogether, but I’m a total sucker for G1 characters from the first 2 seasons. And I needed figures that would make sense to combine with CW Optimus. Ironhide, Sunstreaker, and Mirage are reworks of existing Stunticons (Offroad, Breakdown, and Drag Strip, respectively). Prowl is a rework of Streetwise. I won’t go into detail since the rework here is so minor that we may as well just call them repaints.

Cyclonus is yet another rework in the CW line. But this is one rework that feels truly like a rework, and not a repaint with different colors and a different head. A rework of CW Silverbolt, I really dig this Cyclonus figure. He looks absolutely fabulous in the stunning purple paint. Robot mode is nicely proportioned, and the jet mode looks fast and sleek. In addition to the different head mold, Cyclonus offers different wing molds and different nosecone mode in jet mode. And of all the CW body figures, the Silverbolt/Cyclonus mold offers the best combining mechanism, in both function and appearance. The combined head mold is also different, as it is a good representation of Galvatron and not Superion. It’s too bad Cyclonus’s weapon is an exact repaint of the Silverbolt’s weapon, but in this case that’s a minor nitpick. I highly recommend Cyclonus. There are enough difference here from Silverbolt that it feels like you are buying a brand new figure.

Galvatronus is the name of the combined form when Cyclonus is the body. Supposedly CW Cyclonus has the power to mind control other limb components and have them merge with him. That’s kind of a hokey backstory, but whatever. I wish they made Scourge and Sweeps as limb components to form Galvatronus, which makes way more sense. That’s actually a pretty awesome combination now that I think about it. Maybe some TF modder out there has done this already. Anyways, below is a pic of Galvatronus using the 4 CW limb Autobots acquired this month.

The only official Masterpice figure this month is G-2 Ver Bumble. I already stated many, many times about how I love MP G1 Bumblebee. The G2 Ver of the figure is the exact same mold, except he’s covered with shiny gold paint that I initially thought this would be Goldbug. And instead of the Spike figure, we get a second face plate that more resembles the original G1 toy, and a nice rocket pack that we have seen Sideswipe or Optimus use (it’s unclear to me if Bumblebee ever used the rocket pack). If you already have the first MP Bumble, then it’s not necessary to get this figure. But I did anyway, because I love this mold, the new shiny paint job, and all the extra accessories.

Perfect Effect Perfect Combiner PC-05 Upgrade Set and Before & After Omega Launcher for MP-17 Prowl are two upgrade kits that are similar to the upgrade sets that I bought back in June of this year. Specifically, they are repaints of Perfect Combiner PC-02 and Alpha Launcher for MP-18, respectively. Perfect Combiner PC-05 is meant to be used with Combiner Wars Superion, but technically you can use them with any of the CW figs in combined form. Omega Launcher are non-firing shoulder missile enhancements for MP Prowl. Again, they are exact repaints of what came before, so I won’t go into them too much. Actually, I have not even had the chance to put Omega Launcher on Prowl. But in theory it should look just as awesome as Alpha Launcher on Bluestreak.

Devil Star is ToyWorld’s interpretation of Astrotrain. I love ToyWorld, and I love Astrotrain, which is why I pre-ordered this figure as soon as I learned that they are doing a G1 cartoon accurate version (TW had another version of this figure prior to this called Evila Star, with colors that are more similar to the original Takara toy). I have so much faith in ToyWorld that I knew they would do Triple Changers justice. However, I later watched some reviews of Devil Star (and Evila Star), and learned that this guy is an absolute pain to transform. He’s very much a panel former, which doesn’t bother me that much. But it’s excruciatingly unpleasant to get all the panels to line up in both alt modes. I wanted to cancel the pre-order as soon as I found out, but I was a little too late on the trigger and the pre-order came in before I knew it. So now I have it stuck in my possession. To this day, the figure is brand new, never opened. And I don’t plan to. Maybe one day he will be worth big bucks and I’ll resell it. Devil Star is a limited edition figure. In the pic above, the big box is the figure itself, but the little box on top are these exclusive train tracks that are produced in very limited quantities. I am looking to sell the figure. If you’re reading this and want to make me an offer, contact me.

It took some time, but it finally happened… I got a figure from Warbotron! I wrote about Warbotron more than 2 years ago before this month, and I’m ashamed to say that it took a sale for me to finally buy something from them. My buddy Gemini has the entire Warbotron Combaticon set, and he thinks Sly Strike (aka Swindle) is the best of the bunch. So I have been eyeing Sly Strike for quite some time now. I almost bought the figure at regular price, and I’m glad I didn’t when I saw that TFSource was selling them at $14 off from MSRP. I wasted no time getting one. Gemini did not let me down – Sly Strike is awesome! He comes packaged in robot mode. The body stylings is modeled more after the G1 toy and not the show, but body proportions is definitely updated to modern standards (old G1 body proportions would be awful). His face and head mold looks like it jumped straight out of the G1 cartoon, as its got the famous purple eyes and that discriminant black-market salesman grin that only Swindle can possess. Chest area has a similar purple molding like the G1 toy, though fans have come up with an alternate configuration for the robot mode where the jeep hood area can form over the chest for a more Binaltech/Alternator appearance. The figure is also designed so the wheels over the shoulders and the back area can be transformed differently to suit your taste. Warbotron took more liberties with the alt mode, and in my opinion that’s not necessarily a bad thing. In G1, Swindle transforms into a FMC XR311 combat support vehicle. Munitioner by FansProject uses a military Humvee as the alt mode. Warbotron decided to use a Jeep type vehicle, like the Jeep Wrangler Commando. Some fans may complain this is not G1 enough, but I think it’s a good modern update. The detail, colors, and moldings of the alt mode is terrific as well. Transformation of the figure is fairly straightforward. It’s not overly complicated, but at the same time complex enough to satisfy collectors of 3rd party items. Construction wise, Sly Strike does suffer from some slight tolerance issues, but nothing so glaringly bad that it would distract from the enjoyment of the figure. As for his weapons, the hand held pistol is almost an exact replica of G1, updated to MP scale and modern detail standards. Warbotron took more liberties with the cannon and gave it a translucent pink barrel, and personally I think it’s a nice touch. All in all I highly recommend Sly Strike as the MP scale figure for Swindle. I thought I got a good price for Sly Strike at $75.99, but TFSource has been clearing them out at $66.99 for the past few months! Get them while they last!

Last but certainly not least, we have Sever, Fans Toys’ interpretation of Snarl in MP scale. Sever is the 2nd figure that I got in the Fans Toys line of MP Dinobots. The first one was Scoria (aka Slag). FT released Soar (aka Swoop) in between Scoria and Sever, but I didn’t have a chance to buy that one. Scoria is generally considered a good figure, but he’s not without his faults. He’s got the now famous loose shoulder issues that many fans complain about. Surprisingly, mine is fine in the shoulders (I did buy the repair parts for $4 just in case). However, my Scoria is quite loose in the hips. If I pick up Scoria, the legs would definitely droop down at the crotch, and he won’t be able to hold any cool poses. Part if this is because there’s so much weight in the legs. Other fans have complained about some other minor construction issues. Overall I like Scoria, but he was not the perfect MP dino that I thought he would be, because of the loose hips. So when Sever came out, I was a little nervous that he would also share similar issues. But I chose to buy him anyway, because of the $20 early bird discount. I am happy to report that Sever is absolutely perfect! I detect no construction issues whatsoever. All joints are just the right amount of tightness. Some fans complain the joints are too tight, but I think they’re fine. He can hold some terrific poses, and the figure has enough articulation to take full advantage of the solid construction. In both mode, Sever looks like he jumped straight out of the G1 show. Transformation is also superb. He’s not terribly difficult to transform, but at the same time there’s enough going on in the mechanics that hardcore collectors of this line would not find him too simple. The details on this figure would satisfy even the most picky. The weapons for Sever are awesome as well. They both have light up LED capabilities, though batteries are not included. Check the LED operation of the weapons as soon as you get Sever, as I heard some fans complain about them not working. And if I have to make one small nitpick, it’s that there’s no place for the weapons in Dino mode. But that aside, it really feels like Fans Toys is taking all their lessons learned with Scoria, and they have implemented them in Sever. (They may have done that with Soar as well, as I have heard nothing but praises.) This is 3rd party MP Dinobot at it’s best. To this day I still have Sever out for display, because I like him that much. I highly, highly recommend Sever. Fans Toys have fully restored my faith in their line of MP Dinos. I am now looking forward to getting both Soar and Stomp (aka Sludge), the latter of which came out after Sever.

That ended up being a way longer post than I meant for it to be. October of 2015 had 12 purchases, for a total of 11 figures and 2 upgrade sets. This is the last month in 2015 with a high number of purchases. This month was also a lot of repaints. By my count, only 4 purchases are not repaints or reworks. Even the 2 upgrade sets are repaints. Sometimes I buy TFs purely based on if I like the character; I think in the future I need to be more mold conscious. I am very happy about Sly Strike and Sever, two of the more expensive purchases this month. A bit regretful that I should have cancelled Devil Star when I had the chance.

Til next time… Transform and Roll Out.