The title post says it all. This is War For Cybertron Earthrise Arcee riding Studio Series 86 Wreck-Gar. It sorta works. Check it out.
Would Arcee prefer to ride someone else? You tell me.
Ride or die. Transform and Roll Out.
CHUG 2015 Lineup
Pic taken from Generations Season 3 Autobots.
CHUG 2021 Lineup
Who wore it better? You decide.
Transform and Roll Out!
It is now April 15th. Yes I am still doing the whole Shelter in Place thing. But more importantly, I wanted to give an update on how I’m doing with my Transformers Challenge that I outlined in the last post.
I was only able to complete 3 out of the 5 that I set out to do. A bit less than I hoped for, but a 60% completion rate is better than 0.
Fans Toys Roadking
Roadking is successfully transformed into truck mode. Pic below.
From an engineering perspective, this is a really impressive piece. Roadking (aka Motormaster) is only a bit taller than the MP-10 in robot mode, but this truck is equal in size to the MP-10 in alt mode with the trailer! That’s some awesome mass-shifting going on there. Lots of panels collapse onto itself in Roadking’s robot mode, and for alt mode they expand out and form the trailer.
I would say this is a challenging piece, but not impossible. On my next transform I will probably need the instructions again. But I feel like this process can be committed to memory if done repeatedly. At this point I am undecided as to if I would call this a fun transformation. I enjoyed the overall process, but lining up the panels in alt mode is more chore than pleasure.
Masterpiece Sunstreaker
Here is a figure that I had fun transforming back to alt mode. Sunstreaker is looking super sexy in his awesome Lamborghini Countach!
For this transformation back to alt mode, I resorted to using the instructions. But that was more because I didn’t want to accidentally break something (which I’ve done from time to time). Without the instructions, I probably could have figured this out in reasonable time.
Going back to alt mode felt about the same as going to robot mode in terms of difficulty. There are some really small pieces on this figure which makes for an intricate transformation. Engineering wise, Sunstreaker is probably the most impressive official MP Carbot made to date. Definitely a lot going on for a toy this size. One side mirror popped off during my transform back to car mode, and getting it back on took some effort. Other than that, the conversion process is a joy. I intend to transform Sunstreaker more in the future, because it’s fun and challenging. I would say his twin brother Sideswipe is still the better piece as far as being the perfect balance of toy and collector’s item, but Sunstreaker is the more accomplished figure in terms of TF engineering.
Fans Toys Rouge
You could almost say you’ve been to hell and back if you have successfully transformed Fans Toys Rouge. With much sweat and tears, I got this MP style Arcee back to her robot mode.
Looking at the instructions is a must for doing this piece. However, the instructions only show how to go from robot to car. Sure, just “reverse steps to go back” like what all instructions say. That is way easier said than done for something as frustrating as FT Arcee. There a bunch of pieces held together by thin plastic and metal poles. All these pieces move and rotate around these poles, so during transformation Arcee is one hot mess. There is one waist hinge that seems like it would totally break off if you bend her the wrong way. The instructions proved to be only marginally useful. I had to look at another transformation video of FT Rouge going from car to robot. Thank you Chosen Prime for putting that vid together.
The positive about this figure is that Arcee looks absolutely beautiful in both modes. I have no complaints about the appearance of either robot or car mode. She looks like she stepped straight out of the G1 movie. Fans Toys is really all about show accuracy and Rouge is no exception. FT engineers are to be commended for coming up with a figure that looks so good and so accurate in both modes, while the transformation requires no cheating (ex: parts-forming, fake parts, etc). But this figure is not fun at all. It is highly unlikely that I will ever transform Rouge back to car again.
At this point I still got about 3 weeks of Shelter in Place remaining, if plans don’t change. I will get to Megatron and Gewalt in later weeks.
Stay strong and stay home my fellow TransFans. We can beat this pandemic together. Transform and Roll Out (again, not literally out).
Here in the San Francisco Bay Area, the coronavirus pandemic has forced most of the local counties to adopt a Shelter in Place order. Everyone needs to “Shelter From Home”. In other words, only go out for essential activities, and stay home otherwise. All food establishments are in to-go only mode. Most other businesses are closed. Social Distancing has become the norm. Initially this order was only to go til April 7th, but now it looks like it will extend to May 1st at the minimum.
I have been working from home full-time since St Patrick’s Day. My wife has been working from home for even longer than that. I am busy doing real work at home, all the while trying to entertain a 2-year-old baby who’s stuck at home with us full time since her daycare is closed from the isolation order. It has been tough.
When you have a 2-year-old, life is always busy. I don’t have that much free time on my hands anymore. But when I do, I need to find different ways to pass the time as going outside is a non-option. I stumbled on this article suggesting 10 Transformers-related activities to beat the self-isolation blues. I am inspired by #8 and #9, and came up with my own challenge. I will select 5 MP-style Transformers that’s been lying around and untouched for some time (or never), and get them transformed! I am selecting these 5 below.
#1 Masterpiece Megatron (MP-36)
MP-36 Megatron is a Transformer that I’ve had since May of 2017, and to this day I still have not transformed him! This may be the only figure in my entire collection that I have opened but not transformed. Now, nearly 3 years later, I will attempt to get him to that awesome Walther P38. This might take a while, but it will be fun.
#2 Fans Toys Roadking
I got Fans Toys’ homage to Motormaster in January of this year. I still haven’t opened him, right up til before writing this blog entry. In preparation for this, I got him opened just now. The pic above is him posed with his sword and gun, in robot mode. I will get him to truck mode.
#3 Masterpiece Sunstreaker (MP-39)
MP-39 Sunstreaker is probably the most demanding piece in the entire MP Carbot lineup. I got him back in January of 2018. I opened him pretty soon after he arrived, and got him transformed to robot. He’s been stuck in robot ever since then. Now after 2 years later, I will transform him back to that superb Lamborghini Countach. Since I’ve gone through this once, I am mentally prepared to give my transforming senses a workout. It wasn’t easy going from car to robot, and I anticipate that going backwards will be even tougher.
#4 Fans Toys Rouge
I bought Fans Toys Rouge in May of 2019, about a year ago. I opened her pretty quick. She’s packed in robot mode, and I got her transformed to alt mode fairly soon after opening the figure. But I remember the transformation process being a nightmare. This is not a fun transformation at all. If I compiled a list of top frustrating figures to transform, FT Rouge would top the list. And because of that, Rouge stayed in alt mode all this time. Don’t get the wrong, both modes are fantastic. I salute Fans Toys’ engineers for making a figure that looks true to Arcee in both modes while requiring no parts-forming or puzzle-forming. But damn, the conversion process is not for the faint of heart. I’m hoping that going back to robot will be easier. We’ll see.
#5 DX9 Gewalt
DX9 Gewalt is another figure I acquired in January of 2018. Currently, most fans agree this is the best MP-style Blitzwing on the market. Gewalt is packed in tank mode. I transformed him to jet mode pretty soon after I got him, then transformed him to robot mode. He’s stayed in robot mode all this time. The transformation is not impossible, but definitely challenging. I will attempt to do the reverse transformations from memory, but most likely I will resort to looking at instructions or online videos.
There you have it. My self-imposed Transformer challenge for this Shelter From Home episode. I will attempt to get this challenge done by April 15th. Yes, I know that some of you out there reading this think you can do all this in less than a day. If you really can, then I congratulate you on all the free time you have on your hands. I am not so fortunate. Despite being sheltered at home, I still have a full-time job, and a 2-year-old to tend to. Time is not my friend.
What kind of Transformers related activities are you doing during this difficult time? Feel free to comment below.
Stay safe and stay healthy everyone. We will beat this pandemic together. Transform and Roll Out (again, not literally go out).
2018 is starting off with a bang. Power of the Primes is in full swing. Some nice 3P products and one Masterpiece figure adds to this month’s collection to start the new year right.
Micronus, Liege Maximo, Vector Prime
I like the Prime Masters. For those that don’t know, Prime Masters are the master class figures that came released as part of the Power of the Primes line. The master figures can go inside an exo-suit, and the exo-suit transforms into a weapon. G1-ers can think of them as a Targetmaster and Pretender rolled into one.
In my opinion, the Prime Masters are countless times superior to Titan Masters. Titan Masters are the modern day equivalent of Headmasters, but the accessory that comes with them are so lame. With Prime Masters, Hasbro actually made Pretenders cool. Didn’t think I would live to see this day.
The 3 Prime Masters below are Micronus, Liege Maximo, Vector Prime. Though G1-ers will instantly recognize they are using the Pretender shells of Cloudburst, Skullgrin, and Metalhawk. Good to see that Hasbro did not forget their G1 roots. As a sidebar, I still have my Couldburst and Skullgrin from G1, in pretty good shape too.
In the pic below, the Prime Masters are inside the outer shell.
All transformed to weapons, shown in the pic below. Notice the Prime Master of each figure is transformed into a block attached on top of the weapon. You could do this or just leave them inside in weapon mode.
Overall, I highly recommend the Prime Masters. They are fun to play with and their weapon modes serve a real purpose.
Grimlock, Slug, Swoop
Power of the Primes finally gives us some G1-worthy updates of the Dinobots. And I don’t just mean Grimlock. PotP is doing the whole team. Purchased this month are Grimlock, Slug (Slag), and Swoop. Below I have them in their dino modes.
As a whole, these Dinobots are not too shabby. They are true G1 derivatives, updated for this modern era. However, in my last post, I did mention that this PotP Grimlock pales in comparison to the many 3P offerings that are available today. If you have bought any of them, you will find that these PotP Dinobots simply don’t compare in quality or aesthetics. But on the other hand, you can’t get better G1-esque Dinobots for the price. Grimlock is only about $25, the rest about $17. Hasbro is offering a way to get decent upgrades of G1 Dinobot characters without breaking the bank.
The pic above shows off Grimlock, Slug (Slag), and Swoop. They each look solid in their dino mode, and in robot mode (not pictured) they look just as good too. Transformation of each of these is on the simple side, with obvious transformation schemes for anyone familiar with G1 and CHUG. When complete, the 5 figures will combine. I kinda wish they didn’t do this, as implementing the combination mechanics means putting restrictions on other aspects of the figure, such as the dino modes, robot modes, and sizes of the figures. Grimlock at voyager size is fine, but I do with the other Dinobots are bigger than deluxe.
Overall, I recommend these. Sure they’re not as good as the 3P stuff out there, but Hasbro hasn’t done anything this G1 for the Dinobots in, like, never. Do them a solid and show that you appreciate this effort by buying them.
Arcee and Grotusque
Arcee and Grotusque are Toys R Us exclusives. This was the last online purchase I made from Toys R Us, before they went belly up. To this day I still have not opened these. It’s mostly because I love the packaging that they come in, that I don’t want to ruin it. And these are both repaints, so it’s not like I haven’t seen the mold. Arcee is a repaint of TR Brainstorm and TR Blurr. Grotusque is a repaint of Twinferno. I am more inclined to open Grotusque, to complete my Monsterbots (I will have Repugnus in a later month).
I will show off how they look in the cool packaging. Pics below.
Each of these figs come with two Titan Masters. Grotusque comes with Scorponok and Fengul, and Arcee comes with Ultra Magnus and Leinad. What kind of name is Leinad? It’s Daniel spelled backwards. Oh what will these crazy Hasbro writers think of next.
Optimus Prime and Rodimus Prime
Toward the end of the month, I started my paternity leave. Having a baby changes your life. The wife sent me to Target for some baby stuff one Saturday night. I welcomed the opportunity as it allowed me to get out of the house. But more importantly, it gave me a chance to hunt for some TFs. I love my daughter, but anyone who’s had a baby will tell you that you need to do some stuff that reminds you of the person you were prior to the baby. For me, hunting for TFs satisfy that requirement. That, and writing in this blog.
But back to the topic at hand. On this trip to Target, I found Evolution Optimus Prime and Rodimus Prime. Both are leader class figs, and both have the “Evolution” tag written above their names. This is because both figs include a smaller fig that represents their persona before taking on the mantle of Autobot leadership: Orion Pax for Optimus, and Hot Rod for Rodimus.
Let’s look at Optimus first. He looks great in the box. At Target I was astonished how close he looks to MP-10 Optimus. After I opened the figure and had him side by side with MP-10 (and I should have taken a pic of this), I was amazed at how much Evolution OP resembles MP-10. The two are about the same size. In your hands, MP-10 weights quite a bit more than Evolution OP. But the details and the paint job of Evolution OP is on par with the MP figure. I’m especially impressed with the head mold of Evolution OP, it’s MP quality.
To transform, the smaller figure detaches from the rest through the back. This smaller figure transforms into the cab, while the rest of the body forms the trailer. Think of how G1 Ultra Magnus or Powermaster Optimus Prime does it. Picture below.
Obviously the cab can detached from the trailer. The cab can then transform into Orion Pax by itself. The whole things sounds gimmicky, but Evolution OP implements all this very well. A review is definitely in order and I plan to do one soon.
Rodimus Prime has all the similar features. It’s packed in robot mode just like Optimus. Rodimus is a bit more of a puzzle former, and he does remind of the FansProject Protector upgrade kit designed for Classics Rodimus. To transform, you first detach Hot Rod from the rest of the figure. Hot Rod will transform into the front cab, while the body forms the trailer. Pic below.
The front cab will come out as the Hot Rod race car. And this can transform into Hot Rod. All in all, I like this figure too. I recommend both the Evolution leader figures. They are not perfect, but they offer very good alternatives to buying MP versions of these characters at affordable prices. And for both of them, you get two characters in one package. Oh, and they both come with Matrix holders where you can plug Titan Masters into them.
Sunstreaker
MP Sunstreaker was pre-ordered months ago. During my paternity leave, it finally showed up on my doorstep (or maybe it was in the mailbox). He is packaged in car mode like all the other MP cars. And you would expect this to scale well with all other MP cars, especially Sideswipe.
I looked through all my pics, and I guess I didn’t take any of Sunstreaker by himself in alt mode. I can only find pics of him and Sideswipe, so here they are. Notice how well they scale together.
I cannot be happier with the alt mode of Sunstreaker. The Lamborghini alt mode is just as good as Sideswipe’s, and the scale is so on par. He is in his trademark yellow, and his iconic rear mounted engines is proof of having a “Super Tuning” Lamborghini alt mode.
MP Sunstreaker is VERY VERY IMPRESSIVE from an engineering perspective. The transformation is something to behold. And yes, he is difficult. I used instructions because I’m always worried that I’ll break something for such a complicated piece, but it is possible to do it without them if you’re looking for a challenge. I only transformed him once, from car to robot. So I don’t remember it too well now as I write this. But I do remember there were a lot of steps, and I that the backpack transforming sequence is simultaneously awe-inspiring and demanding. Sunstreaker is definitely not a figure that you actively play often to transform it over and over. But when you are finally done, it is so rewarding. Check out the awesome looking robot mode.
Sunstreaker is well built. All joints are nice and tight. In robot mode he scales well with other MP Autobot cars. He can be put into some nice action poses.
Great face sculpt worthy of the handsome Autobot.
Below are shots of the backpack. A lot goes on to get the backpack in this configuration, and this is a testament to the engineering brilliance of this figure. Those that like to nit-pick could argue there’s a bit of junk here, the backpack is quite thick when viewed from the side. But when you consider how much of the alt mode is folded into this, I can easily overlook this minor distraction. The rest of Sunstreaker is completely kibble-free.
Sunstreaker can store his pistol on the back. He also comes with a Chip Chase figure. MP Sunstreaker is not too playable because of the high difficulty, but as a collector piece he gets my highest possible recommendation.
Blue Skybreaker Sword
I got the Blue Skybreaker Sword to push my order over $150 to get free shipping (the order was this and Gewalt, below). I chose this accessory because I still need a sword to go with my TF Prime Beast Hunter Optimus Prime. The stock sword is broken, and the handle is stuck in his right fist. The story of that incident is documented here. As soon as I can get that handle out, I will consider this figure repaired and using this better sword. See the pic above in all its shiny blue glory. I can’t wait for OP to try this sword in his robot mode.
Gewalt
Last but certainly not least, we have Gewalt, DX9’s homage to Blitzwing. And I’ll get straight to it: Gewalt is awesome! As of this writing, there has been some attempts at a MP Blitzwing by various 3Ps. DX9 Gewalt is by far the best, and the preferred MP Blitzwing by most hard core fans. Fans Toys does have their offering coming up, but that’s been on pre-order for more than 2 years now and to this day still no real pics other than computer renders. FT usually has me impressed, but I got sick of waiting for them. Gewalt is so thoroughly spectacular that FT needs to come up big for me to consider their interpretation of Blitzwing.
Gewalt is German for violence, if any of you are wondering. He comes packed in tank mode, and for good reason. The tank mode is the most compact mode, and thus easy to fit into the box. The tank mode is good, and I should have took a pic. However, I would consider the tank mode the weakest of the 3 modes. Gewalt really shines in his 2 other modes. Consider the jet mode below.
Now that is Blitzwing! This is the MiG-25 that he was meant to be. Yes I know some G1 purists will bash it for not having the thick tank-kibble wings that he had in G1, but c’mon. The wings in that shape was nasty and in no way reflect how a MiG-25 looks. They only looked like that because of the toy limitations in the 80s. Gewalt’s jet mode is a vast improvement and updates this alt mode to modern MP standards.
The colors in this mode are unmistakably Blitzwing. I have a pic above showing off Gewalt in jet mode next to ToyWorld Requiem (or Elegy, as he is sometimes called). Gewalt is a big figure, but scales nicely with other MPs.
Now for his robot mode. Check it out:
Now if that’s not Blitzwing, than I don’t know what is. The way he looks, it’s like he stepped straight out of the G1 Movie. Blitzwing got a decent amount of screen time in the movie, up til the fracas inside Astrotrain after the injured Decepticons were jettisoned.
Articulation for Gewalt is pretty good. And the figure is so well built that he can hold all those poses. Gewalt’s transformation does test your abilities as a TransFan. I won’t say it’s difficult, like say Sunstreaker, but it’s certainly not easy. I only transformed it once from tank to jet, then again from jet to robot. I’m not sure I will be able to go back without looking at the instructions. But that’s a challenge for another day.
For accessories, he comes with his rifle, his sword, the tank cannon (which can be removed), an extra screaming face, and some extra waist parts (I’m not entirely sure that they’re waist parts, and I don’t know if they go on Gewalt or some other DX9 figure).
Here I have a pic of Gewalt with a fabulous rub-on faction decal.
That’s all the items for the month. Again, 2018 started with a bang, with so many figures. And they’re all quality products too. The only two pieces here that I would possibly not recommend is Arcee and Grotusque, and I only say that because they’re repaints. I recommend everything else. It’s a good time to be a TransFan.
Transform and Roll Out!
Much like this previous post from about a year ago, today let’s take a look at some CHUG Autobots from G1 Season 3.
CHUG is an acronym for Classics Henkei Universe Generations. These are all terms that Hasbro or Takara has used to label various Transformers lines that represent a modern update of classic G1 characters. I have also seen some fans refer to them collectively as G3, since it follows G1 and G2. Whatever you call it, they are all modern toy interpretation of Generation 1, though not necessarily in their exact G1 forms.
All characters below are regulars in G1 Season 3. Though they may have had their origins well before that.
I chose these 5, mostly because I have them handy. Let’s look at each of them in detail, in the order of release.
Rodimus, Reveal the Shield, 2011
If you are talking about G1 Season 3, you must include Rodimus. He is the leader of the Autobots for most of the season. Sure, he never lived up to Optimus Prime, but those are big shoes to fill for anyone. Originally in 1986, his name was Hot Rod. And he would become Rodimus Prime after receiving the Autobot Matrix of Leadership. For licensing reasons, Hasbro could not use the name Hot Rod nowadays. So now the Hot Rod incarnation of this character goes simply by Rodimus. The first version of this particular figure came out all the way back in 2006. That Rodimus was one of only 6 figures first released for the Classics line. I have that figure too, but he’s stuck in a box somewhere in the back of the closet. So I am using this Reveal the Shield version instead, only because he was easier to get to. This figure was released in 2011 as part of a 2-pack with Cyclonus. He’s more cartoon color accurate than the initial version, though I’m not sure that’s a good thing here. This figure still holds up well today. The alt mode is nice and sleek while being G1 accurate, and the robot mode is robust with nice poseability. Transformation is also well engineered. In my opinion, this is still the definitive CHUG Rodimus even 10 years later. But he might be due for another upgrade soon. We’ll see what Hasbro does.
Springer, Generations Thrilling 30, 2013
I know I have written about this Springer back in this post. If you read that post, I mention that I was so excited to open this fig that I didn’t even stop to take pics of it in the box. This Springer is one of the best figs that Hasbro has ever produced! That’s a strong statement coming from me. I have limited space for displaying figs. So usually what happens is I display a new figure for a while, then it goes into some storage somewhere. I acquired this Springer back in May of 2013. And almost 3 years later today, I have continuously displayed this on some shelf, never going back into a box! That should tell you how much I like this fig. This figure is hands down the best triple changer that Hasbro has ever made. All 3 modes look good. Transformation is complex enough to satisfy the true fan, while being not overly complex to reduce any fun factor. As of this writing, he’s still very affordable on Amazon. So get one if you don’t have one yet. This mold was later re-worked slightly to be Sandstorm. That fig is good too.
Arcee, Generations Thrilling 30, 2014
This Arcee figure was mentioned in the very last post. I acquired the fig in 2015, but I believe her release was in 2014. Regardless, she is the definitive CHUG Arcee. Mostly because this is the only CHUG Arcee released. As the most famous female Autobot in the history of TF, you would think Hasbro would want to do this figure well before 2015. But better late than never. This Arcee figure is a worthy rendition of the character. I like the alt mode. It well represents the sporty future/Cybertronian car that she transforms into in G1. In robot mode she’s got some back kibble. And transformation wise, she’s a bit of a shell-former. But I can overlook it because I do understand the challenges of making Arcee. Most other TF characters that appear in G1 are toy-first, meaning the designs are based on an existing toy. Arcee is the opposite of that. She was created for the 1986 G1 Movie, and toy makers are now doing a figure based on that design. Overall I am happy with this figure. Not perfect, but pretty solid.
Corelock (aka Grimlock), ToyWorld, 2015
Dinobots are forever favorites among the G1 fandom. By the time Season 3 rolled around, all 5 Dinobots are still kicking butt and taking names. But the only one that made regular appearances in the season is Grimlock. In Season 3, he talks more then ever before, in his classic Grimlock speech. And much like when I made the post for Season 1 Autobots, I am using the ToyWorld version of Grimlock. As a 3rd party, ToyWorld cannot officially call him Grimlock. So he is listed as Corelock (and sometimes Grimshell). Of all the Grimlock toys that I own, this one is hands down my favorite (and I own a lot). In T-Rex mode and robot mode, Corelock captures the G1 look down to the last detail. Transformation follows the tried and true G1 formula for Grimlock, but there are enough engineering differences here to make this figure feel modern. Construction is solid and robust. He is the perfect size for CHUG too. Hasbro has made some CHUG dinos, but scale wise they feel too small. Corelock displays well next to other CHUG Autobots, as you can see in the pics. Large enough to be CHUG, but not so large as the 3rd Party MP dinos. (A sidebar: the FansToys MP style G1 Dinos are awesome figures, which I must write about in a future post.) He can also combine with the other ToyWorld Dinos to form a giant robot. G1 Dinos never did this, so I won’t go into this too much. I know what you’re thinking: how does he compare with MP Grimlock? That is a very tough comparison. I really like that figure too. But I feel Corelock edge him out just a little as the better Dino, only because Corelock is more playable than MP Grimlock. Overall, Corelock gets my highest recommendation. If you need a Grimlock in your CHUG lineup, look no further.
Ultra Magnus, Combiner Wars, 2015
Last but not least, there is Ultra Magnus. I love Ultra Magnus. He never got enough credit as a member in the Autobot leadership hierarchy. Always the 2nd in command, but consistently available to make leadership decisions and fight in tough battles when the Primes are not around. Sure, no one was gonna take the place of Optimus (and rightfully so), but he should have got his chance instead of Rodimus (like Optimus instructed). As a toy, this character never got much love until perhaps the late 2000s. Before that, he was ALWAYS a repaint of the Optimus Prime toy. G1 was nice enough to give him a different trailer at least, so in robot mode he appears completely different. These days, UM always rightfully get his own figure (including a nice MP figure). This Combiner Wars figure is the first full-fledged Ultra Magnus that we get in the CHUG line that is NOT a repaint of Optimus Prime. And boy did they do a good job here. Personally, this is my favorite UM figure of all time, surpassing even the MP. He is Leader class size, like he should be. He looks great in robot mode. One of my complaints about the MP UM fig is that he’s too blocky. CW UM does not have that problem. He appears exactly like he does in the show. In truck mode he looks great too. Some might complain that the cab is a bit small, but if that scales right, UM would be way too big in robot mode. Transformation follows the standard UM formula, but in this case it’s not a bad thing. The cab and trailer is integrated into one when he transforms. He also comes with a Mini-Con, which I don’t really care for. As for this writing, he is lower than MSRP on Amazon. He is released as part of the Combiner Wars lineup, but he doesn’t really combine with anything. Gets your now if you don’t have one already. No true TransFan can live without this UM in their collection.
Below is a pic of the figs in alt mode.
Season 3 Autobots… Transform and Roll Out!
OK, I am now finally getting back to documenting my monthly purchases. I swear to Primus I will finish this and catch up to where I am currently. Might take many posts, but it shall be done!
Here are the stats breakdown for the month:
First up is RiD Grimlock. I think this was my first figure from the Robots in Disguise line. RiD figures as a whole seems cheap and simplistic. But this is Grimlock, so I gave it a shot. I dunno… he’s not bad, but not great either. Fun to play with for a while, but very forgettable once the fig is put away. I don’t think too highly of the RiD line, and this figure doesn’t do anything to change that perception.
Arcee and Chromia are the last of the Generations Thrilling 30 figs that I would buy. I still don’t know where this Thrilling 30 tag comes from… I am guessing maybe it’s the 30th anniversary of TF. Whatever the reason, I have enjoyed figs from this line. Arcee was one that I waited for. We finally get a good CHUG representation of everybody’s favorite female Autobot in her G1 stylings. Alt mode for Arcee looks awesome. Robot mode wise, she’s got some kibble on the back, but nothing I can’t live with. Transformation wise she’s a bit of a shell-former, which again deals with the back kibble. But I think I’m just so happy to get an official CHUG Arcee that I’m willing to overlook these minor shortcomings. Chromia is an excellent figure. I believe Chromia is a minor remold of Transformers Prime Arcee. In robot mode they look very similar, but Hasbro did enough modifications to the alt mode to make Chromia feel like a brand new figure. She looks like those bikes out of Tron. Very very cool! I actually enjoyed playing Chromia more so than Arcee. But I am glad I have both TF fembots in my collection.
OK – Now on to Combiner Wars! This is a series that I have looked forward to for some time. Combiner Wars officially kicked off in January of 2015. CW is a G1-inspired subline in the TF Generations line of figures. The gimmick here is that one voyager sized figure and 4 deluxe sized figures can combine to form a giant robot. Much like the combiners from G1, the toy limb components can be mixed with any bodies in any combination (like Scramble City). Third parties have been doing combiners for quite some time now. So I guess it’s about time Hasbro got on this trend and make some money off their own properties, instead of letting third parties hog all the action.
I wasn’t able to find any deluxe sized figs this month, but I was able to get 2 voyager figs and 4 legends figs in CW. These won’t combine obviously, but I like all these characters so I bought them all.
To start things off, we get CW Optimus Prime. Yes friends, they made OP into a combiner. Not technically G1-esque, but whatever. They are also using this mold as Motormaster (which I will go into in future posts), so this is more of a way for me to check out the mold. The robot mode is kinda blocky. Truck mode is not bad. I’m personally not too impressed with this mold in combiner body form. There is a problem with the hips of the figure. But between robot and truck modes, the construction is solid and robust. So for me, the CW OP fig is just ok.
Next in the line is CW Silverbolt. The famous G1 Aerialbot leader is finally getting a modern upgrade! Yeah, there was an Ultra Class figure released around 2008 (and later repainted into Skyfall). But that figure did not combine, so he was never a true Silverbolt in my opinion. The CW Silverbolt is a G1 homage through and through. In both jet and robot modes, he looks accurate to his G1 self. Transformation may be a tad simple for mature collector, but is still leaps and bounds more involved than the Ultra Class figure (which in my opinion was one of the simplest figures ever made, especially considering something of this size). In combined body mode, this figure really shines. The body mode looks good, is G1-accurate, and provides good mechanics as the center of a giant robot. He connects easily to other limb components, and mechanically well-serves the weight distribution challenges of a combiner. I guess one can always say that the jet mode has too much bulk on the underside, but all combiner jets in this history of TF has had that problem. Overall Silverbolt is a great figure. No wonder this figure is repainted into Cyclonus and Scattershot later.
CW Thundercracker is just a repaint of Thrilling 30 Starscream, while CW Windcharger is a repaint of Thrilling 30 Tailgate. So I won’t go into them too much.
CW Powerglide is a fun little figure. Both robot and jet modes are nice, and transformation feels adequate for a figure of this size. Powerglide is another figure where Hasbro has released an Ultra Class version. But true G1 enthusiasts will always think of Powerglide as a Mini-Bot, and so a legend class fig is much more appropriate. CW Bombshell is another welcome addition to this line. We already got Skrapnel (Shrapnel), so having Bombshell is a must (now I’m hoping they do Kickback). This Bombshell is a terrific figure in my opinion. Both modes are fun to play with. He comes together really nice in the beetle mode. Bombshell is my favorite Insecticon, so I am glad to see Hasbro give him a proper modern rendition.
Now onto the 3rd party purchases for the month. I still have not opened Military Titans as of this writing in April of 2016 (shame on me), so I won’t go into him. I did open ToyWorld Infinitor. This is an homage to Fortress Maximus, but a much more smaller and playable version. I never had the pleasure of the G1 Fort Max toy. There are re-issues out there, but he’s a huge piece that would take up way too much space for me. In the G1 cartoons, Fort Max is a city-size robot (like Metroplex). However in the comics, Fort Max is a large but ordinary size Autobot. I think that is what Infinitor is going for. Regardless, Infinitor is a solid, well-built figure. I can’t say for certain since I never had the G1 toy, but Infinitor feels essentially like G1 Fort Max shrunken down to playable size. He’s very blocky, like you would expect. The Headmaster gimmick is alive and well on Infinitor. He’s got the robot mode, a space cruiser mode, and 2 different city modes (though admittedly the 2 city modes look and feel similar). Overall I think this figure is ok. Get him if you like Fort Max, but not a must have in my opinion.
Finally, we are getting to the Masterpieces for the month. First up is MP Ultra Magnus, a figure that many fans have praised over and over. Some even go so far as to suggest that this should win figure of the year. Overall I think MP Ultra Magnus is pretty good. The alt mode could not be more G1. He scales well with other MPs in this mode. Transformation to robot mode uses the familiar scheme, but there are enough differences in the engineering to make him MP worthy. The robot mode of this figure is where I’m not as impressed. He’s still too blocky for me, and I was really hoping those brilliant Takara engineers could produce a robot mode that is more true to the G1 cartoon UM aesthetic. I hold MPs to a higher standard. Maybe figs like the MP-10 Optimus Prime set the bar too high, and I was expecting too much. Nevertheless, MP Ultra Magnus is a figure that is worthy of your collection. He’s not perfect in my opinion, but still something you should consider if you collect MPs or if you’re a fan of Ultra Magnus.
And last but not least, there is MP Bumblebee. This is a figure that gets no complaints from me whatsoever. We finally have in our hands the ultimate version of Bumblebee in all his G1 glory. The VW bug is nothing short of accurate. Transformation to robot is pure genius. And in robot mode, he looks like he jumped straight out of the G1 cartoon. Takara gave us another MP perfection in Bumblebee. He’s very well built and have amazing poseability. Oh, he also comes with Spike in his Exo-Suit, as seen in the 1986 G1 movie. This Spike figure is not bad, but I got this for Bumblebee, which is what I play with most of the time. If you could buy only one figure that I listed here for this month, get Bumblebee. You will not be disappointed.
That was a lot of TFs for one month. Things will slow down a bit after this. Til next time… Transform and Roll Out!
Several weeks ago I went into a post about all my Team Prime figures in the Robots in Disguise (RID) line. Today I’m featuring the same Autobot figures, but in the First Edition (FE) line.
Let me point out real quick right now that Ratchet is not FE. This is the RID version. I don’t think there is a FE Ratchet. I just put him here to be complete. It would not be Team Prime without Ratchet.
I’m going to give some quick thoughts below on each figure between the 2 lines.
Optimus Prime: I definitely prefer the FE version. I think the FE figures looks better in both robot and alt modes. Color wise, I think the FE also looks a little more show accurate. The weapons of the FE figure also looks cooler. The silly mech-tech weapon of the RID just don’t make sense to me. However, I can’t really say which transformation is more show accurate. On the FE figure, the chest plates do not form the cab windshield, which in my opinion is kind of a letdown. From a mechanical engineering perspective, they are both pretty good, but the FE wins out by just a little. There are some little paint touch-ups that I like better on the RID figure, such as the silver around the chest, and how the headlights are colored yellow. But the final verdict is that the FE is the superior figure. Unfortunately the FE is not available in mass retail in the United States, so online dealers are your only bet. I got mine for fifty some dollars, and I’ve seen online dealers ask for more than 100. If that price turns you off, then by all means pick up the RID. It’s not as good as the FE, but still a very good figure.
Bulkhead: Again, this is a figure where I strongly recommend the FE over the RID. In alt mode, I think both figures are pretty good, and I just be nitpicking if I recommended one over the other. However, in robot mode is where the FE really shines. It’s not that the RID is bad, it’s just that the FE is oh so impressive. He’s well articulated and all parts lock into place well where they should. Take a careful look around the chest and shoulder area of both figures, and right away it will be apparent that the FE is a lot more show accurate. Many fans also complain about the wings on the RID version, that they shouldn’t be there. Mechanical engineering on the FE is a great feat in TF design, a lot more so than the RID. And the mech-tech weapon on the RID is just a huge conglomeration of crap that I won’t even bother writing about. But just like FE Optimus, FE Bulkhead is not available in the US. Hasbro loves to stick it to us. I got mine FE from eBay for about $70. Definitely buy the RID figure, because it’s only $20 and it’s very good. But if you’re after true Bulkhead greatness, you will need to get the FE.
Arcee: For these shots, I used the FE pink version since that’s the only one I have opened. I also have the blue FE version, but that one is still sealed in the package. Comparing between the FE and the RID, I think they both have their pros and cons. The FE has a more impressive design, but the RID is better built. I also like the paint apps on the RID figure a little better. FE comes with two blades, while RID comes with one blade and a gun. Transformation is probably a little more accurate on the FE. I think these are both very good figures. I would just buy them both.
Bumblebee: Hasbro has been making way too many Bumblebees that I don’t even feel like comparing the two. A lot of fans bash the RID figure, which in my opinion isn’t that bad. I think the RID figure is very playable, a lot more so than the FE figure. I think of all the TF Prime figures that I bought, I find Bumblebee to be the least impressive (both FE and RID). It’s not that either one of them is bad, it’s just that these figures really don’t offer anything new when compared to the movie Bumblebee figures. Mechanically they feel very similar. Most fans would probably say that the FE figure is better. I guess I’m so sick of Bumblebee that I’m not even interested enough to agree or disagree with that assertion.
Ratchet: Same figure. RID Only. I’ve said before that I think this is the best Ratchet figure I own. That should be your hint to go out and get one now.
There you have it. My thoughts on each Team Prime figure in each toy line. Overall, they’re all really good. Hardcore TransFans would probably get both versions anyway. For the more casual fans, find the FEs if you can, especially Optimus and Bulkhead. But what’s in the stores is very good too, and is a good substitute if you don’t feel justified in spending more than $20 for a TF.
Team Prime… Transform and Roll Out!
I’ve been watching Transformers Prime Season 1 on Blu-ray. I finally finished the set sometime last week, and let me just say that this is an awesome show! This might be my favorite Transformers series, next to G1. If you’re a TransFan and you have not been watching, it’s time to get with the program! Plenty of fan uploads on YouTube. But for the best HD quality, go out and get the Blu-ray like I did.
Anyway, the core 5 Autobots featured in Transformers Prime are Optimus, Bumblebee, Arcee, Ratchet, and Bulkhead. This group stationed on Earth is often referred to as Team Prime. Last week I found Robots in Disguise Voyager Bulkhead, which completes my Team Prime Autobots in the RID line. Below are pics of them as a group. For reasons that elude me, RID Voyagers are called Powerizers and RID Deluxes are called Revealers. Hasbro needs to stop it with all these terms.
I recommend all of these figures. Yeah I know that there are plenty of TransFans out there that would recommend the First Edition figures over these. For the most part I would as well, based on what I’ve seen. But that doesn’t mean the RID figures are bad by any means. If you’re not willing to shell out the money for overpriced FE figures, then these are very good substitutes. Actually, for Bumblebee and Arcee, I would not say that the FE figures are hands down better. RID versions of these 2 characters have their pros too. To this date I still have not opened my FE Optimus, and I just ordered FE Bulkhead on eBay, so I’ll reserve my thoughts for the Voyagers until I open them. And as far as I know, there is not a FE Ratchet.
After FE Bulkhead arrives, I’ll do group shot of the FE Team Prime (but still using RID Ratchet). Transform and Roll Out!
April seems to have gone by in a flash. As far as shopping for Transformers goes, we seem to be in a dry spell. For the hardcore TransFan, not a whole lot new stuff hit the shelves this month. Below I present the TFs that I bought in April
I first bought Soundwave in March. But like I mentioned in the March post, I wanted to see if I can find it cheaper. On April 1st I found him at Walmart (and returned the 1st one to TRU). Also on the same day I got Arcee at Target. Both of these figures are excellent. This particular Soundwave is a very refreshing take on the character, and both alt mode and robot mode are accurate to his show appearance. RID Arcee is also a solid figure that will give the FE version a run for her money. In fact, I can’t decide which is the better Arcee. They both have their pros and cons. TF Prime figures as a whole have been nothing short of spectacular. There’s not a single one thus far that I would not recommend.
As for Darksteel, the $3,90 price is not a mistake. Regular price is $16.99 as you can see in the pic, but they were having a sale. I also had one of those $10 Kohl’s gift cards that I frequently get in the mail. So final price after tax was $3.90. Not a bad deal at all. I already bought Darksteel last year, but I broke one of the foot pieces so I thought I buy it again.
Only 3 TFs for April… that’s very unlike me. Hopefully there will be more TFs in May. Transform and Roll Out!