Archive

Posts Tagged ‘Masterpiece’

Happy St Patrick’s Day 2024! Keen in Green Transformers!

March 17th, 2024 Comments off

After a 18+ month blogging hiatus, I am back! My last real entry in this blog was this one, dated around August of 2022. I didn’t think I would be away for this long. I am still very actively collecting TFs. But other responsibilities in life, both personal and professional, has kept me away from TFMatrix. But no more! I am picking up right where I left off, and I will continue to share what I’ve been doing as a TransFan with renewed vigor!

In a well-honored tradition of TFMatrix, I like to do special posts about my green Transformers on St Patrick’s Day. And I always feature green TFs that I have never featured before. So without further ado, for 2024, feast your optics on these green figures!

Green TFs 2024

Quick bits about each figure:

  • Masterpiece Hoist – This is the most expensive figure in this group. Hoist needs no introduction, and HasTak finally got around to re-molding MP Trailbreaker into MP Hoist. This figure is solid, and he looks good in both robot and alt modes. There is one part with the shoulder transformation that’s a bit scary, like it could easily be broken. But overall, Hoist is well-engineered and a lot of fun. I had Artifex, a 3P MP-style Hoist by MMC (Mastermind Creations). Artifex is horrible, and I sold it years ago (for a profit no less). MP Hoist is the one you need in your collection.
  • Legacy Evolution Armada Megatron – This is the largest figure in this group (if you count his shoulder protrusions). And he’s the easiest one to transform. Armada Megatron in the Legacy Evolution line is a figure you can easily pick up and play, which is not a bad thing in my book. This is a solid figure with a straightforward transformation. I don’t know much about Armada, as that came around during my TF Hiatus. The only other Armada Megatron I own was released back in Combiner Wars. I don’t recall that figure too well, but I should dig it out one of these days and compare it to the Legacy Evolution version.
  • Legacy Road Hauler – Road Hauler is a repaint of War for Cybertron Earthrise Grapple. So if you are familiar with that figure, you already know what you’re getting with Road Hauler. A few notable points make Road Hauler worthy of inclusion in your collection. First, I love this lime green. It really pops on this figure, and reminds me of the color of Constructicons. Second, I love that face! He seriously looks like he’s screaming for dear life, as if he’s aboard that doomed shuttle with Ironhide and Prowl in the 86 movie. And finally, Road Hauler may be a tribute to Hauler, a yellow crane vehicle we see in the very first ep of G1 Transformers. When Hound was shot by Laserbeak and fell into a ravine, we see some Autobots come to his rescue later. Cliffjumper looks up to a crane and says, “Hauler, pull him up!” Fans have theorized who exactly is Hauler over the years. Some suggest that Hauler is really Grapple, some thinks Hauler is some kind of drone, while others claim it’s another Autobot. If you subscribe to that last theory, then Road Hauler may be the figure you have long wanted.
  • Legacy Cosmos – Legacy Cosmos is perhaps the most sought-after figure in this group. He was released as a Walmart exclusive, in a limited sub-line under Legacy called Velocitron Speedia 500 Collection. Cosmos was the most recognizable G1 character in the collection, and the only figure who had a new mold (the rest were repaints, Road Hauler being one of them). So needless to say, fans and scalpers snatched him up quick. I never saw Cosmos in store. Luckily, my friend Gemini was able to track one down for me at the Walmart near him. Legacy Cosmos is a terrific figure. He has a fun transformation, and both modes look toon accurate. Engineering and tolerances are above par. Scales nicely with other CHUG figures. Legacy Cosmos is going anywhere from $70 to $150 these days. If you missed out, don’t despair. A re-release of Cosmos with some minor paint app differences is coming soon. Wait for that figure instead.
  • Legacy Prime Bulkhead – The last figure in this group is Bulkhead from TF Prime, released in the Legacy line. As a figure, Legacy Bulkhead is not bad. He is well-built and both modes look good. The overall transformation scheme is tried and true, but there are bits in the implementation that’s both refreshing and unusual. I will admit that there’s always something about this transformation that stumps me if I haven’t handled the figure in a while. Also, I don’t find this Bulkhead to be too screen accurate. He had a very different alt mode in the show, and in robot mode he looks way too blocky. Still, the figure is solid. Not a must-have by any means, though.

Links to previous St Patrick’s Day posts.

I can’t talk about St Patrick’s Day without mentioning March Madness. My school, UCLA, has a very dim chance of being selected to the field of 64. But even if they don’t, I’m still gonna try to watch as many games as I can.

Happy St Patrick’s Day everyone! Transform and Roll Out!

 

Categories: Pics

Masterpiece Optimus Prime and Season 1 Carbots

May 29th, 2022 Comments off

This is something I wanted to do for a while now. I rounded up Optimus and all my Season 1 Carbots in some kind of MP form and assembled them for a group photo! I had almost all of them in alt mode in pure happenstancce, so I only had to transform a few into their vehicle forms to get them all ready to roll out!

Feast your optics on the pics below.

This is the lineup, in order of purchase:

Some of these characters can be represented by other MP style figs that I have. Such is the case with Optimus and Mirage. For Optimus, I could have used Transform Element OP Leader. But he was in robot mode and I didn’t feel like doing the work to get him in alt mode. I have done one round trip transformation with OP Leader so I know it’s a challenging process. Plus I would’ve had to use the MP-10 trailer anyways. For Mirage, I also have DX-9 Invisible. But Transform Element Phantom is the newer figure, and most would agree it’s the superior figure. So Phantom wins.

I have some new MP figs on pre-order that will update some of these. One figure is Fans Toys Jive, who is their version of Jazz. Another is MP-56, the official MP Trailbreaker. The pics of both of these look excellent, and I’m curious how much superior they will be to Downbeat and Aegis, respectively. I can’t wait to get them.

I like to get all the Season 1 Minibots in some kind of MP form as well, so all my Season 1 Autobots would be complete in MP form. I got Bumblebee, Brawn (Fans Toys Hunk), Huffer (Fans Toys Rig), and Cliffjumper (X-Transbots Toro). I just need Windcharger and Gears. Time to look at some 3P MP options for these 2.

I’m gonna transform them all into their robot selves and then assemble them again for another group photo. That may take a while. But it shall be done.

Autobots… Transform and Roll Out!
 

Categories: Pics

Fans Toys Hunk Quick Review

September 24th, 2020 Comments off

I first featured Fans Toys Hunk in this post. FT’s version of MP Brawn is getting his 15 minutes today.

He’s packed in robot mode, so let’s start there.

Hunk in classic A-stance.

View from the side. A bit of backpack kibble, but not too bad.

Back view.

Close up of the face. That’s a great sculpt. Good job FT.

Overall I’m very happy with Hunk’s robot mode appearance. This is a robot mode that does Brawn justice. I can nitpick here and there, but I don’t think there is a figure in existence that comes closer to how Brawn look in the G1 cartoons. The face is spot on. The colors are spot on. Brawn is stockier in the animation, so you might say Hunk’s proportions are a bit too slim. But I like it.

Here we see Hunk with his trademark pistol that the G1 animators created for him. As far as I can tell, this gun resembles the cartoon weapon fairly well. Hunk only comes with three accessories: this gun, another face of Hunk yelling (not pictured in this review), and a drill bit he uses in vehicle (more on this later).

Hunk in action.

Hunk celebrating.

Hunk standing around looking cool.

The articulation in robot mode is ok, but some may find it too limiting. The arms are not bad. Shoulder, elbow, and wrist rotations are all there. The legs ain’t too shabby either. Hip swivel, knee bend, and ankle pivots are all accounted for. Head rotation is very limited. There is no up and down, and side to side is extremely limited due to the back flap behind Hunk’s head. I’ve seen pics of Hunk with waist swivel, but I could not get the waist to twist. If possible, it’s really hard to do. I didn’t try it too hard in fear of breaking the toy. All the official FT pics don’t show Hunk with any waist swivel. There’s no ab crunch of any kind.

Here is Hunk next to the famous MP-10 Optimus Prime. They scale together pretty well.

When I took this pic, I had Hunk in one hand and the MP-10 in the other. To my surprise, Hunk weighs more! This is the US Version of the MP-10, and it’s unclear to me if the Japanese version uses any die-cast. But to have Hunk weigh more than the Hasbro MP-10 is still a testament to the fact that FT uses some quality materials. Bravo.

I detect no weaknesses in Hunk’s construction. All joints are at the right tolerance, nothing too loose or too tight.

As far as the robot mode’s appearance, I have next to no gripes. At first I thought the feet looked weird, in that they’re too big and they’re the wrong shape. But then I checked the G1 animation model and the comic book model, and that’s exactly how they look (especially in the US Marvel comics). So again, props to Fans Toys for being so toon accurate, something they never fail to do. I already mentioned about the size of the backpack when viewed from the side. Yes it’s not perfect, but easily forgivable considering how well everything else looks.

Transformation to vehicle mode is more on the complex side for a figure of this size. He’s not impossible like FT Rouge, but he’s also not simple like FT’s earlier offerings (Stomp, Soar, Sever, etc).

The leg transformation deserves special mention. Each leg splits apart, and ends up forming the sides of the vehicle. It sounds hokey on paper, but seeing this transformation implemented in action is kind of cool. G1 purists will bash this for being an unfaithful transformation, but that would fall into the area of hardcore nitpicking.

Going to alt mode, getting the backpack to be formed properly as the vehicle’s top rear section can be a bit frustrating. It takes perfect alignment for the whole assembly to snap into place. There are also a bunch of small transformation pieces on both the waist and legs that, in my opinion, detract from the overall enjoyment of the transformation process.

Hunk looks good in alt mode once the transformation is complete. Check the pics below.

Super accurate alt mode to the cartoon.

Another angle. Hunk comes with rubber tires and rolls well on a flat surface.

Side view.

Front view.

Back view. They did not forget the gas canister.

Bottom view. Notice there is storage for the weapon. Nice.

Here we see Hunk using that alt mode drill that Brawn used in The Ultimate Doom. I see this more as a novelty accessory, but kudos to FT for including it.

Another shot of the drill.

Now for some alt mode size comparisons. Here he is next to MP Bumblebee.

Now next to MP Sideswipe.

Next to both of them. For a mini-bot Hunk does seem a bit big in alt mode. But seeing as he is a Jeep off-road type of vehicle, I think it works.

Hunk is definitely a worthy purchase for your Masterpiece collection. Most of my gripes are transformation related. I think he’s more complicated than he needs to be. Fan of intricate articulation may also find Hunk a bit lacking in this regard. But this figure scores high in all other areas. I recommend Hunk with no reservation. The only other Masterpiece style Brawn that I’m aware of is Bad Cube Brawny. I don’t have that figure. I’m told Brawny is good too, but comes with a very punishing transformation process that is not for the faint of heart.

On a completely separate but related note, this marks my third review of a Brawn figure. The other two are my reviews for Revenge of the Fallen Brawn and Titans Return Brawn. Why am I reviewing so many Brawns? Is he subconsciously my favorite character? Probably not. I hope not.

Transform and Roll Out.
 

Categories: Pics, Toy Reviews

Masterpiece Optimus Prime and Autobots, Team 5

August 27th, 2020 Comments off

MP Optimus is back with another team of trusted Autobots to lay waste to some undisciplined Decepticons up to no good.

This is Team 5. Here were the previous teams: Team 1, Team 2, Team 3, Team 4.

With the exception of MP-10 Optimus, all figures here are 3rd party and purchased within the last year. This really shows how far 3rd parties have come.

Fans Toys got 2 representatives here in Hunk and Sheridan. Hunk is a great figure, possibly the best MP Brawn on the market today. Both modes look toon accurate. Transformation to car mode can be a tad frustrating in the final steps. I have yet to transform Sheridan, but he definitely looks good in robot mode.

X-Transbots have undoubtedly improved their status as a 3rd party company of transforming figures in recent years. I’m generally very impressed with their offerings, and I got 3 here to prove it. I chose Neptune after looking through many choices in 3P MPs of Seaspray. He is in my opinion the best MP Seaspray on the market, in terms of cartoon accuracy and figure engineering. (Sidebar: the upcoming Spindrift 2.0 by Fans Toys may change that, but only time will tell.) Klaatu was also chosen among many 3P MP offerings of Cosmos. He looks the most toon accurate in both modes. I went with the metallic version, and I’m oh so glad I did. The picture here does not do this paint job justice, it has to be seen to be fully appreciated. Klaatu is a bit chunky in bot form, and he does present a bit of scale issues with other Mini-bots.

X-Transbots Aegis stars as MP Trailbreaker. In G1, Trailbreaker was my very first Carbot, so I’m extremely partial to Trailbreaker. He was the last Carbot to get any love in CHUG, something that I wasn’t entirely happy about. And now he is the last Carbot to appear in my Autobot MP Teams. I feel kinda bad about that. But better late than never, and in this case I could almost say I saved the best for last. XT Aegis is better than all previous attempts at an MP Trailbreaker. I won’t go into what those are, but if you are in the market for a MP Trailbreaker, you need only consider Aegis.

Transform and Roll Out.
 

Categories: Pics

Masterpiece Sunstreaker Quick Review

June 8th, 2020 Comments off

During the COVID-19 shelter-in-place order (which is still happening as of this writing), I gave myself a Transformers Challenge that involved transforming 5 difficult figures. One of those figures is Masterpiece Sunstreaker (MP-39). I already knew what an awesome figure Sunstreaker is, but transforming him from robot back to alt mode doubly reaffirmed that notion.

Sunstreaker’s twin brother Sideswipe was the first MP Carbot (MP-12). A review of that figure appears on this blog, nearly 8 years ago. It’s only fitting that Sunstreaker get a review too.

The box.

Look at what’s inside: Sunstreaker, a pistol, a rifle, two extra faces, Chip Chase, his wheelchair, and the monster mask from Hoist Goes Hollywood!

Instructions, bio-card, and extra side mirrors.

Let’s start with the alt mode.

Beautiful “Super Tuning” Lamborghini alt mode, with Sunstreaker’s iconic exposed rear-mounted engine.

Rear of the vehicle, in “Super Tuning” configuration.

Flip-up head lights.

Doors and front hood opens.

In alt mode Sunstreaker even has the rear-mounted gun that he uses to shoot down Laserbeak in Ep 2 of More Than Meets The Eye. Yes HasTak loves you. No detail was spared.

And because HasTak loves you, there is the ability to configure Sunstreaker to look like a standard Lamborghini, as opposed to the “Super Tuning” version. So don’t say that HasTak never does anything for you. In this configuration, Sunstreaker is virtually the same as his twin Sideswipe. The most obvious difference is the lack of the exposed rear-mounted engine, which is now hidden by a panel flip.

Rear of Sunstreaker in non “Super Tuning” form. Notice you get the rear brake lights instead of thrusters.

Before we go on to bot mode, I’ll include some alt mode side-by-side pics of the two brothers.

Transformation to robot mode is nothing short of amazing. It is quite intricate, and could easily make a Top 10 most difficult list if I decided to compile one today. But it’s not so difficult that you can’t figure it out without instructions.

Describing the transformation will not do it justice, so I won’t. I’ll just quickly mention that the forming of the backpack in bot mode deserves special mention. It is quite a feat in TF engineering. The designers of this figure have earned themselves a place in the TF Toy Engineers Hall of Fame.

Sunstreaker in classic A-stance.

Sunstreaker side view. The backpack is perfectly acceptable size. No kibble or junk whatsoever. Bravo.

Back view. Upper back looks extremely toon accurate. A tiny bit of kibble around the butt area, but nothing that I can’t overlook.

Close up of the face. Is Sunstreaker as handsome as he thinks he is? You decide.

Sunstreaker loves to kick butt and look good while doing it. So I included a whole bunch of action shots. This is action pose #1.

Close up of action pose #1. Because Sunstreaker wouldn’t want you to miss out on the details.

Action pose #2 – twin gun action.

Action pose #3 – looking cool after the shot.

Action pose #4 – only Sunstreaker can make kneeling down look good.

I love it when figures have spaces to store weapons when they’re not used. Sunsteaker can store the rifle on his back.

With Chip Chase. Why is Chip included with Sunstreaker? Is it because of that one G1 scene where Chip was riding on Sunstreaker’s shoulder? That seems like a flimsy reason. There are better suited Autobots to pair Chip with, like Prowl. But I’m glad we got a Chip figure somewhere.

Last but not least, this is Sunstreaker wearing the monster mask from Hoist Goes Hollywood. HasTak spared no detail. I wonder if I can get this mask on the other MP Carbots who also wore it on that episode. I should try that.

If you collect Masterpiece Transformers, you no doubt already have MP Sunstreaker in your collection. There’s no reason to be on the fence about this figure. Sunstreaker is one of the best offerings in the entire MP lineup. Both modes are beautiful. Plenty of accessories. Amazing transformation. Superb construction. I would sound like a commercial if I offered any more praises.

The only thing I can say that sort of remotely qualifies as a negative is that he’s not that playable, because of the transformation difficulty. MP Sunstreaker is not a TF you are likely to transform multiple times a day. Once you get it to the other mode, you will likely leave Sunstreaker as is for days, if not weeks or months. In my case, I opened Sunstreaker almost as soon as I got him and transformed him to robot right away. Then I left him like that for about 2 years before I transformed him back.

Fans will obviously compare Sunstreaker with Sideswipe. The are both good figures. Sunstreaker is the more impressive piece, from a toy engineering perspective. He came five years later than Sideswipe, so that’s not a surprise. Sideswipe, however, is more playable with a more straightforward transformation. In my opinion, Sunstreaker is purely a collector’s piece, while Sideswipe achieved the perfect balance of being a collector’s item and toy.

I give MP Sunstreaker the highest possible recommendation. This is another figure that does justice to the Masterpiece line.

“They can’t beat the best!” Transform and Roll Out!
 

Categories: Pics, Toy Reviews

UPDATE: Shelter From Home Transformer Challenge

April 15th, 2020 Comments off

It is now April 15th. Yes I am still doing the whole Shelter in Place thing. But more importantly, I wanted to give an update on how I’m doing with my Transformers Challenge that I outlined in the last post.

I was only able to complete 3 out of the 5 that I set out to do. A bit less than I hoped for, but a 60% completion rate is better than 0.

Fans Toys Roadking

Roadking is successfully transformed into truck mode. Pic below.

From an engineering perspective, this is a really impressive piece. Roadking (aka Motormaster) is only a bit taller than the MP-10 in robot mode, but this truck is equal in size to the MP-10 in alt mode with the trailer! That’s some awesome mass-shifting going on there. Lots of panels collapse onto itself in Roadking’s robot mode, and for alt mode they expand out and form the trailer.

I would say this is a challenging piece, but not impossible. On my next transform I will probably need the instructions again. But I feel like this process can be committed to memory if done repeatedly. At this point I am undecided as to if I would call this a fun transformation. I enjoyed the overall process, but lining up the panels in alt mode is more chore than pleasure.

Masterpiece Sunstreaker

Here is a figure that I had fun transforming back to alt mode. Sunstreaker is looking super sexy in his awesome Lamborghini Countach!

For this transformation back to alt mode, I resorted to using the instructions. But that was more because I didn’t want to accidentally break something (which I’ve done from time to time). Without the instructions, I probably could have figured this out in reasonable time.

Going back to alt mode felt about the same as going to robot mode in terms of difficulty. There are some really small pieces on this figure which makes for an intricate transformation. Engineering wise, Sunstreaker is probably the most impressive official MP Carbot made to date. Definitely a lot going on for a toy this size. One side mirror popped off during my transform back to car mode, and getting it back on took some effort. Other than that, the conversion process is a joy. I intend to transform Sunstreaker more in the future, because it’s fun and challenging. I would say his twin brother Sideswipe is still the better piece as far as being the perfect balance of toy and collector’s item, but Sunstreaker is the more accomplished figure in terms of TF engineering.

Fans Toys Rouge

You could almost say you’ve been to hell and back if you have successfully transformed Fans Toys Rouge. With much sweat and tears, I got this MP style Arcee back to her robot mode.

Looking at the instructions is a must for doing this piece. However, the instructions only show how to go from robot to car. Sure, just “reverse steps to go back” like what all instructions say. That is way easier said than done for something as frustrating as FT Arcee. There a bunch of pieces held together by thin plastic and metal poles. All these pieces move and rotate around these poles, so during transformation Arcee is one hot mess. There is one waist hinge that seems like it would totally break off if you bend her the wrong way. The instructions proved to be only marginally useful. I had to look at another transformation video of FT Rouge going from car to robot. Thank you Chosen Prime for putting that vid together.

The positive about this figure is that Arcee looks absolutely beautiful in both modes. I have no complaints about the appearance of either robot or car mode. She looks like she stepped straight out of the G1 movie. Fans Toys is really all about show accuracy and Rouge is no exception. FT engineers are to be commended for coming up with a figure that looks so good and so accurate in both modes, while the transformation requires no cheating (ex: parts-forming, fake parts, etc). But this figure is not fun at all. It is highly unlikely that I will ever transform Rouge back to car again.

At this point I still got about 3 weeks of Shelter in Place remaining, if plans don’t change. I will get to Megatron and Gewalt in later weeks.

Stay strong and stay home my fellow TransFans. We can beat this pandemic together. Transform and Roll Out (again, not literally out).
 

Categories: Pics, Uncategorized

Shelter From Home Transformer Challenge

April 5th, 2020 Comments off

Here in the San Francisco Bay Area, the coronavirus pandemic has forced most of the local counties to adopt a Shelter in Place order. Everyone needs to “Shelter From Home”. In other words, only go out for essential activities, and stay home otherwise. All food establishments are in to-go only mode. Most other businesses are closed. Social Distancing has become the norm. Initially this order was only to go til April 7th, but now it looks like it will extend to May 1st at the minimum.

I have been working from home full-time since St Patrick’s Day. My wife has been working from home for even longer than that. I am busy doing real work at home, all the while trying to entertain a 2-year-old baby who’s stuck at home with us full time since her daycare is closed from the isolation order. It has been tough.

When you have a 2-year-old, life is always busy. I don’t have that much free time on my hands anymore. But when I do, I need to find different ways to pass the time as going outside is a non-option. I stumbled on this article suggesting 10 Transformers-related activities to beat the self-isolation blues. I am inspired by #8 and #9, and came up with my own challenge. I will select 5 MP-style Transformers that’s been lying around and untouched for some time (or never), and get them transformed! I am selecting these 5 below.

#1 Masterpiece Megatron (MP-36)

MP-36 Megatron is a Transformer that I’ve had since May of 2017, and to this day I still have not transformed him! This may be the only figure in my entire collection that I have opened but not transformed. Now, nearly 3 years later, I will attempt to get him to that awesome Walther P38. This might take a while, but it will be fun.

#2 Fans Toys Roadking

I got Fans Toys’ homage to Motormaster in January of this year. I still haven’t opened him, right up til before writing this blog entry. In preparation for this, I got him opened just now. The pic above is him posed with his sword and gun, in robot mode. I will get him to truck mode.

#3 Masterpiece Sunstreaker (MP-39)

MP-39 Sunstreaker is probably the most demanding piece in the entire MP Carbot lineup. I got him back in January of 2018. I opened him pretty soon after he arrived, and got him transformed to robot. He’s been stuck in robot ever since then. Now after 2 years later, I will transform him back to that superb Lamborghini Countach. Since I’ve gone through this once, I am mentally prepared to give my transforming senses a workout. It wasn’t easy going from car to robot, and I anticipate that going backwards will be even tougher.

#4 Fans Toys Rouge

I bought Fans Toys Rouge in May of 2019, about a year ago. I opened her pretty quick. She’s packed in robot mode, and I got her transformed to alt mode fairly soon after opening the figure. But I remember the transformation process being a nightmare. This is not a fun transformation at all. If I compiled a list of top frustrating figures to transform, FT Rouge would top the list. And because of that, Rouge stayed in alt mode all this time. Don’t get the wrong, both modes are fantastic. I salute Fans Toys’ engineers for making a figure that looks true to Arcee in both modes while requiring no parts-forming or puzzle-forming. But damn, the conversion process is not for the faint of heart. I’m hoping that going back to robot will be easier. We’ll see.

#5 DX9 Gewalt

DX9 Gewalt is another figure I acquired in January of 2018. Currently, most fans agree this is the best MP-style Blitzwing on the market. Gewalt is packed in tank mode. I transformed him to jet mode pretty soon after I got him, then transformed him to robot mode. He’s stayed in robot mode all this time. The transformation is not impossible, but definitely challenging. I will attempt to do the reverse transformations from memory, but most likely I will resort to looking at instructions or online videos.

There you have it. My self-imposed Transformer challenge for this Shelter From Home episode. I will attempt to get this challenge done by April 15th. Yes, I know that some of you out there reading this think you can do all this in less than a day. If you really can, then I congratulate you on all the free time you have on your hands. I am not so fortunate. Despite being sheltered at home, I still have a full-time job, and a 2-year-old to tend to. Time is not my friend.

What kind of Transformers related activities are you doing during this difficult time? Feel free to comment below.

Stay safe and stay healthy everyone. We will beat this pandemic together. Transform and Roll Out (again, not literally go out).
 

Categories: Uncategorized

Happy St Patrick’s Day 2020! Green in Quarantine

March 17th, 2020 Comments off

Welcome to this special edition of another St Patrick’s Day celebration post. Here in the SF Bay Area, the coronavirus outbreak has forced local governments to implement a “Shelter in Place” order. It’s not a full lockdown, but pretty close. Details here. I’ve been ordered to work from home.

This is a St Patrick’s Day unlike any other. No one will be out. Bars are forced to close. But that won’t stop me from making another St Patrick’s Day post with my green Transformers. Seriously, I got nothing better to do at home in quarantine.

Back row, left to right: Masterpiece Acid Storm, Studio Series Brawl

Front row, left to right: X-Transbots Klaatu (Metallic version), Generations Thrilling 30 Acid Storm, WFC Siege Springer

I keep forgetting to include the 2 Acid Storm figures on previous St Patrick’s Day posts. The MP was purchased in 2013, and the Generations legend fig in 2015. They get to shine today.

Brawl is one of the better figs from the Movie SS line. If you dig movie figs, get this one.

War for Cybertron Siege Springer is the best Springer released by HasTak, probably even better than Generations Thrilling 30 Springer. He is now in mass retail as of this writing. Go get yours.

X-Transbots Klaatu is obviously a homage to Cosmos. This is a great figure! He is superbly constructed with tight ratchets. Figure looks screen accurate in both modes. And what an awesome paint job! I’m so glad I got the metallic version. If you want an MP Cosmos for your collection, get Klaatu.

Links to previous St Patrick’s Day posts.

2019
2018
2015
2013
2012
2011

We need Perceptor and Ratchet to give us a vaccine to COVID-19 stat!

Stay indoors and stay safe everyone. Wash your hands. Transform and Roll Out (well, don’t literally go out).
 

Categories: Pics

Masterpiece Optimus Prime and Autobots, Team 4

May 7th, 2019 Comments off

MP Optimus returns with a different team of MP Autobots to give the Decepticons some serious beat down.

This is Team 4. Here were the previous teams: Team 1, Team 2, Team 3.

With the exception of Optimus Prime, all other MP figs were acquired in the last two years. Not only that, half these figs are 3rd party. Just goes to show how far the 3Ps have come.

The only one that I will not wholeheartedly recommend here is Artifex (Hoist). He’s a good display piece in both robot and alt modes, but during transformation the figure is somewhat flimsy. I intend to get a different representation of MP Hoist at some point.

I transformed Optimus a bunch of times. Downbeat I transformed several times. Sunstreaker, Grapple, Toro, and Artifex I have only transformed once, from alt mode to robot mode. I need to give these figs more love.

Transform and Roll Out.
 

Categories: Pics

Transformers Purchased in January 2018

February 12th, 2019 Comments off

2018 is starting off with a bang. Power of the Primes is in full swing. Some nice 3P products and one Masterpiece figure adds to this month’s collection to start the new year right.

  • Power of the Primes Micronus, Target, $4.99
  • Power of the Primes Liege Maximo, Target, $4.99
  • Power of the Primes Vector Prime, Target, $4.99

  • Power of the Primes Grimlock, amazon.com, $24.99

  • Power of the Primes Slug, Walmart, $16.82

  • Power of the Primes Swoop, Walmart, $16.82

  • Titans Return Arcee, toysrus.com, $24.99
  • Titans Return Grotusque, toysrus.com, $24.99

  • Power of the Primes Evolution Optimus Prime, Target, $44.99

  • Power of the Primes Evolution Rodimus Prime, Target, $44.99

  • Masterpiece Sunstreaker, amiami.com, ¥9959 (about $91.48)

  • Dr. Wu Blue Skybreaker Sword, tfsource.com, $17.99

  • DX9 Gewalt, tfsource.com, $139.99

Micronus, Liege Maximo, Vector Prime

I like the Prime Masters. For those that don’t know, Prime Masters are the master class figures that came released as part of the Power of the Primes line. The master figures can go inside an exo-suit, and the exo-suit transforms into a weapon. G1-ers can think of them as a Targetmaster and Pretender rolled into one.

In my opinion, the Prime Masters are countless times superior to Titan Masters. Titan Masters are the modern day equivalent of Headmasters, but the accessory that comes with them are so lame. With Prime Masters, Hasbro actually made Pretenders cool. Didn’t think I would live to see this day.

The 3 Prime Masters below are Micronus, Liege Maximo, Vector Prime. Though G1-ers will instantly recognize they are using the Pretender shells of Cloudburst, Skullgrin, and Metalhawk. Good to see that Hasbro did not forget their G1 roots. As a sidebar, I still have my Couldburst and Skullgrin from G1, in pretty good shape too.

In the pic below, the Prime Masters are inside the outer shell.

All transformed to weapons, shown in the pic below. Notice the Prime Master of each figure is transformed into a block attached on top of the weapon. You could do this or just leave them inside in weapon mode.

Overall, I highly recommend the Prime Masters. They are fun to play with and their weapon modes serve a real purpose.

Grimlock, Slug, Swoop

Power of the Primes finally gives us some G1-worthy updates of the Dinobots. And I don’t just mean Grimlock. PotP is doing the whole team. Purchased this month are Grimlock, Slug (Slag), and Swoop. Below I have them in their dino modes.

As a whole, these Dinobots are not too shabby. They are true G1 derivatives, updated for this modern era. However, in my last post, I did mention that this PotP Grimlock pales in comparison to the many 3P offerings that are available today. If you have bought any of them, you will find that these PotP Dinobots simply don’t compare in quality or aesthetics. But on the other hand, you can’t get better G1-esque Dinobots for the price. Grimlock is only about $25, the rest about $17. Hasbro is offering a way to get decent upgrades of G1 Dinobot characters without breaking the bank.

The pic above shows off Grimlock, Slug (Slag), and Swoop. They each look solid in their dino mode, and in robot mode (not pictured) they look just as good too. Transformation of each of these is on the simple side, with obvious transformation schemes for anyone familiar with G1 and CHUG. When complete, the 5 figures will combine. I kinda wish they didn’t do this, as implementing the combination mechanics means putting restrictions on other aspects of the figure, such as the dino modes, robot modes, and sizes of the figures. Grimlock at voyager size is fine, but I do with the other Dinobots are bigger than deluxe.

Overall, I recommend these. Sure they’re not as good as the 3P stuff out there, but Hasbro hasn’t done anything this G1 for the Dinobots in, like, never. Do them a solid and show that you appreciate this effort by buying them.

Arcee and Grotusque

Arcee and Grotusque are Toys R Us exclusives. This was the last online purchase I made from Toys R Us, before they went belly up. To this day I still have not opened these. It’s mostly because I love the packaging that they come in, that I don’t want to ruin it. And these are both repaints, so it’s not like I haven’t seen the mold. Arcee is a repaint of TR Brainstorm and TR Blurr. Grotusque is a repaint of Twinferno. I am more inclined to open Grotusque, to complete my Monsterbots (I will have Repugnus in a later month).

I will show off how they look in the cool packaging. Pics below.

Each of these figs come with two Titan Masters. Grotusque comes with Scorponok and Fengul, and Arcee comes with Ultra Magnus and Leinad. What kind of name is Leinad? It’s Daniel spelled backwards. Oh what will these crazy Hasbro writers think of next.

Optimus Prime and Rodimus Prime

Toward the end of the month, I started my paternity leave. Having a baby changes your life. The wife sent me to Target for some baby stuff one Saturday night. I welcomed the opportunity as it allowed me to get out of the house. But more importantly, it gave me a chance to hunt for some TFs. I love my daughter, but anyone who’s had a baby will tell you that you need to do some stuff that reminds you of the person you were prior to the baby. For me, hunting for TFs satisfy that requirement. That, and writing in this blog.

But back to the topic at hand. On this trip to Target, I found Evolution Optimus Prime and Rodimus Prime. Both are leader class figs, and both have the “Evolution” tag written above their names. This is because both figs include a smaller fig that represents their persona before taking on the mantle of Autobot leadership: Orion Pax for Optimus, and Hot Rod for Rodimus.

Let’s look at Optimus first. He looks great in the box. At Target I was astonished how close he looks to MP-10 Optimus. After I opened the figure and had him side by side with MP-10 (and I should have taken a pic of this), I was amazed at how much Evolution OP resembles MP-10. The two are about the same size. In your hands, MP-10 weights quite a bit more than Evolution OP. But the details and the paint job of Evolution OP is on par with the MP figure. I’m especially impressed with the head mold of Evolution OP, it’s MP quality.

To transform, the smaller figure detaches from the rest through the back. This smaller figure transforms into the cab, while the rest of the body forms the trailer. Think of how G1 Ultra Magnus or Powermaster Optimus Prime does it. Picture below.

Obviously the cab can detached from the trailer. The cab can then transform into Orion Pax by itself. The whole things sounds gimmicky, but Evolution OP implements all this very well. A review is definitely in order and I plan to do one soon.

Rodimus Prime has all the similar features. It’s packed in robot mode just like Optimus. Rodimus is a bit more of a puzzle former, and he does remind of the FansProject Protector upgrade kit designed for Classics Rodimus. To transform, you first detach Hot Rod from the rest of the figure. Hot Rod will transform into the front cab, while the body forms the trailer. Pic below.

The front cab will come out as the Hot Rod race car. And this can transform into Hot Rod. All in all, I like this figure too. I recommend both the Evolution leader figures. They are not perfect, but they offer very good alternatives to buying MP versions of these characters at affordable prices. And for both of them, you get two characters in one package. Oh, and they both come with Matrix holders where you can plug Titan Masters into them.

Sunstreaker

MP Sunstreaker was pre-ordered months ago. During my paternity leave, it finally showed up on my doorstep (or maybe it was in the mailbox). He is packaged in car mode like all the other MP cars. And you would expect this to scale well with all other MP cars, especially Sideswipe.

I looked through all my pics, and I guess I didn’t take any of Sunstreaker by himself in alt mode. I can only find pics of him and Sideswipe, so here they are. Notice how well they scale together.

I cannot be happier with the alt mode of Sunstreaker. The Lamborghini alt mode is just as good as Sideswipe’s, and the scale is so on par. He is in his trademark yellow, and his iconic rear mounted engines is proof of having a “Super Tuning” Lamborghini alt mode.

MP Sunstreaker is VERY VERY IMPRESSIVE from an engineering perspective. The transformation is something to behold. And yes, he is difficult. I used instructions because I’m always worried that I’ll break something for such a complicated piece, but it is possible to do it without them if you’re looking for a challenge. I only transformed him once, from car to robot. So I don’t remember it too well now as I write this. But I do remember there were a lot of steps, and I that the backpack transforming sequence is simultaneously awe-inspiring and demanding. Sunstreaker is definitely not a figure that you actively play often to transform it over and over. But when you are finally done, it is so rewarding. Check out the awesome looking robot mode.

Sunstreaker is well built. All joints are nice and tight. In robot mode he scales well with other MP Autobot cars. He can be put into some nice action poses.

Great face sculpt worthy of the handsome Autobot.

Below are shots of the backpack. A lot goes on to get the backpack in this configuration, and this is a testament to the engineering brilliance of this figure. Those that like to nit-pick could argue there’s a bit of junk here, the backpack is quite thick when viewed from the side. But when you consider how much of the alt mode is folded into this, I can easily overlook this minor distraction. The rest of Sunstreaker is completely kibble-free.

Sunstreaker can store his pistol on the back. He also comes with a Chip Chase figure. MP Sunstreaker is not too playable because of the high difficulty, but as a collector piece he gets my highest possible recommendation.

Blue Skybreaker Sword

I got the Blue Skybreaker Sword to push my order over $150 to get free shipping (the order was this and Gewalt, below). I chose this accessory because I still need a sword to go with my TF Prime Beast Hunter Optimus Prime. The stock sword is broken, and the handle is stuck in his right fist. The story of that incident is documented here. As soon as I can get that handle out, I will consider this figure repaired and using this better sword. See the pic above in all its shiny blue glory. I can’t wait for OP to try this sword in his robot mode.

Gewalt

Last but certainly not least, we have Gewalt, DX9’s homage to Blitzwing. And I’ll get straight to it: Gewalt is awesome! As of this writing, there has been some attempts at a MP Blitzwing by various 3Ps. DX9 Gewalt is by far the best, and the preferred MP Blitzwing by most hard core fans. Fans Toys does have their offering coming up, but that’s been on pre-order for more than 2 years now and to this day still no real pics other than computer renders. FT usually has me impressed, but I got sick of waiting for them. Gewalt is so thoroughly spectacular that FT needs to come up big for me to consider their interpretation of Blitzwing.

Gewalt is German for violence, if any of you are wondering. He comes packed in tank mode, and for good reason. The tank mode is the most compact mode, and thus easy to fit into the box. The tank mode is good, and I should have took a pic. However, I would consider the tank mode the weakest of the 3 modes. Gewalt really shines in his 2 other modes. Consider the jet mode below.

Now that is Blitzwing! This is the MiG-25 that he was meant to be. Yes I know some G1 purists will bash it for not having the thick tank-kibble wings that he had in G1, but c’mon. The wings in that shape was nasty and in no way reflect how a MiG-25 looks. They only looked like that because of the toy limitations in the 80s. Gewalt’s jet mode is a vast improvement and updates this alt mode to modern MP standards.

The colors in this mode are unmistakably Blitzwing. I have a pic above showing off Gewalt in jet mode next to ToyWorld Requiem (or Elegy, as he is sometimes called). Gewalt is a big figure, but scales nicely with other MPs.

Now for his robot mode. Check it out:

Now if that’s not Blitzwing, than I don’t know what is. The way he looks, it’s like he stepped straight out of the G1 Movie. Blitzwing got a decent amount of screen time in the movie, up til the fracas inside Astrotrain after the injured Decepticons were jettisoned.

Articulation for Gewalt is pretty good. And the figure is so well built that he can hold all those poses. Gewalt’s transformation does test your abilities as a TransFan. I won’t say it’s difficult, like say Sunstreaker, but it’s certainly not easy. I only transformed it once from tank to jet, then again from jet to robot. I’m not sure I will be able to go back without looking at the instructions. But that’s a challenge for another day.

For accessories, he comes with his rifle, his sword, the tank cannon (which can be removed), an extra screaming face, and some extra waist parts (I’m not entirely sure that they’re waist parts, and I don’t know if they go on Gewalt or some other DX9 figure).

Here I have a pic of Gewalt with a fabulous rub-on faction decal.

That’s all the items for the month. Again, 2018 started with a bang, with so many figures. And they’re all quality products too. The only two pieces here that I would possibly not recommend is Arcee and Grotusque, and I only say that because they’re repaints. I recommend everything else. It’s a good time to be a TransFan.

Transform and Roll Out!

 

Categories: On The Hunt, Pics