Halloween is upon us yet again! I can’t believe it has been two years already since my last Halloween post. Time sure flies when… well, it just flies. No matter what you’re doing.

As per tradition here at TFMatrix, I assemble my orange TFs for a pic with my stuffed pumpkin.

I try to use the orange TFs that I haven’t used before. There has actually been quite a few orange figs acquired in the last two years, a lot of them in 2016. Clockwise from top left:

• Combiner Wars Wheelie
• Combiner Wars Wreck-Gar
• Titans Return Sentinel Prime
• Mastermind Creations Tigris (Rampage)
• Robots in Disguise Drift
• Thrilling 30 Jhiaxus
• Titans Return Stripes
• Combiner Wars Huffer

There are probably a few more orange figures that got left out of the group shot. Smart readers will notice that I included Tigris (Rampage), but left out Talon and Bovis (Divebomb and Tantrum). I really wanted to include the rest of the orange Feralcons (Predacons), but I only had Tigris handy. I will include them in the next Halloween special.

Also of note is that all the deluxe or larger figs in the pic are using twin weapons, one in each hand.

Here are links to previous Halloween posts.
Cybertronian Halloween 2014
Cybertronian Halloween 2012 (scroll down to last pic)

Have a safe and happy Halloween! Transform and Roll Out!

As promised in a earlier post, I am compiling some stats on my TF purchase and spending habits. But before that, let’s take a look at how 2015 breaks down.

A total of 77 figures were purchased in 2015. This is by far the lowest total since I started tracking my TF acquisitions in 2012. The figures in 2015 break down as follows:

• 2 figures from Age of Extinction
• 4 Masterpiece figures
• 3 figures from Generation Thrilling 30, which ended either late 2014 or early 2015
• 47 Combiner Wars figures (yikes!)
• 5 figs from Robots in Disguise
• 1 Generations fig
• 15 Third Party figures

These numbers are pretty much what I expected. 77 total figs for 2015 is good. I have way too many TFs already, so it’s a good thing to be more selective about what I buy. This number is trending in the right direction, and it comes to about 6.5 figs a month, or about 1.5 figs every week. As for the individual categories, it’s no surprise that Combiner Wars accounted for more than 50% of all purchases. CW was the main thing going in 2015 for hardcore collectors. As a whole I think CW is ok, but could have been better. I probably bought up everything that was put out as CW, and in retrospect some of those I probably should have left on the shelf. Age of Extinction and Generation Thrilling 30 were already on its last legs by the time 2015 rolled around, so the low count here is completely expected. 4 Masterpiece figs seems about on par with all the other years. Robots in Disguise was the major mainstream TF line for 2015. Personally I’m not terribly impressed with this line, which accounts for the modest 5 figs. The 1 fig from Generations was that rare and weird find of Scourage.

As for Third Party items, 15 also feels about on par with how much I buy every year. But since my total purchase count went down, Third Party items now account for a bigger percentage. As a whole, Third Party items are getting better every year. Multiple companies will often now do the same character in the same time frame. Choosy collectors like me have lots of pick from.

OK, now let’s take a look at how things shake out from year to year. Gathering all the stats I have from 2012 to 2015, below is a plot of how many TFs I buy from month to month, in this 4 year span.

The vertical axis is number of TFs bought in the month, while the horizontal axis is the month. Years are coded by color. The obvious thing that sticks out here is that October seems to have the most action. With the exception of 2013, all other years in this period have Oct as a TF heavy month. I have mentioned that several times on this blog already. And looking at the plot as a whole, most purchases seems to be centered around 2 periods, one at Oct-Nov, and the other at Feb-Mar. Oct-Nov I can understand, since it’s right before Christmas. Not sure why there is an increase in activity around Feb-Mar. Also of note are years where there is a TF movie. In this period, 2014 was the only year with a movie (Age of Extinction). So I guess it’s no surprise that 2014 behaved differently from all the other years. Only 2014 had a sharp peak in the summer months, which is probably all the movie toys.

I’m not sure what other conclusions I can draw from this plot. Maybe it will help me in budgeting. But I usually just buy something when I see it, so perhaps not. Ironically enough, the TF heavy months are also when those of us that live in the United States pay property tax (in California anyway). For you foreign readers out there, property tax in the US is super steep. Not a good time to be releasing non-essentials in these months. But it appears I’m still very active in my TF shopping during property tax time, so perhaps this has no impact on the TF community whatsoever.

Now let’s look at some trends from year to year. Below are two bar graphs that summarize my purchase counts and spending totals from 2012 to 2015.

Again, 2014 seems to be the oddball year in this 4 year period. I guess having a movie in the year really makes that much of a difference. 2014 was the only year where I spend more than $3000 total on TFs. The obvious thing to point at is AoE. But I didn’t like the AoE toys that much, so I would be surprised if the all extra spending really went there. I’m gonna have to look at my detailed stats for 2014. Other than that, the overall trend is I’m buying less TFs. Again, that’s a good thing. I got too many. Which reminds me I really need to start selling off some of these figures.

I will start cataloging my 2016 purchases from this point forward. A bit late since 2016 is almost over, but better late than never. Hopefully soon I catch up to where I am currently, and I can have my purchase posts at the end of every month for that month like I used to.

Transform and Roll Out.

September of 2015 is another month of only 2 TFs.

• Generations Thrilling 30 Acid Storm and Venin, amazon.com, $8.13

• Robots in Disguise Megatronus, Toys R Us, $14.99

Acid Storm is yet another repaint of the legend class Seeker mold. As if having Starscream, Thundercracker, and Skywarp is not already enough. I could have easily passed on Acid Storm (and you should too if you’re on the fence about buying), but at about $8 I figured why not. Plus I never saw him in store before. I got this through Amazon, but it was a 3rd party seller. The seller was The Chosen Prime. This was my only experience with them. I have heard good things about them, but to this day I have not ever made a direct order. I’m gonna have to try them soon. Anyway, Acid Storm does not feel as sturdy as the others Seekers of this mold. I guess they used the mold one too many times. Venin is an exact of repaint of Waspinator that came with Starscream. I have said before that Arcee and Chromia are the last of the Thrilling 30 figs. I totally forgot about Acid Storm. He really is the last of the Thrililng 30. And now as I write this, I realize he’s packaged a bit different from Starscream. Weird. Compare pics here and here.

The only other purchase this month is Megatronus from Robots in Disguise. Megatronus is definitely one of the better figures from RiD. His robot mode and alt mode looks good. Transformation is fun. Hasbro managed to make him feel solid and robust despite the cheap plastic. His joints are the right amount of tightness for some nice poses. I got here the Toys R Us exclusive version, which hit stores first. This version has the head of Megatronus in some kind of battle helmet. A mass retail version would come out later (which I also have). Overall I highly recommend this figure. I think he’s my 2nd favorite of the RiD figs, right behind Drift.

Below are some pics of the 2 figs.

2 figs last month, and 2 figs this month. That is very unlike me. But there was a good reason. I went to Europe at the end of September of 2015. I will make a post soon about my TF hunting experience there, much like I did for when I went to Shanghai. Til next time… Transform and Roll Out!

I’m back from Asia! Actually, I got back at the beginning of the month. I was just being a little lazy in updating this blog. But now I got some free time.

I was in Asia for some personal business. Altogether I was in Shanghai (China), Siem Reap (Cambodia), and Taipei (Taiwan). For the purpose of this blog I will only go into the toy hunting aspect of the trip. Gemini accompanied me on the Shanghai leg of the trip. This is the first time that Gemini and I have traveled together internationally. Being the collectors that we are, of course we are gonna go hunting for TFs and other goodies. But enough background info. Let’s get into what we uncovered!

Shanghai Anime Street

On Friday, May 27th, we decided to hit Shanghai Anime Street. Gemini discovered this area from someone’s blog post. Friday we had a driver in Shanghai, and so we asked him to take us here. It’s a good thing we had a driver for this. This area is really hard to get to. We came here in a van, and anyone that has seen Shanghai traffic will tell you that traveling in a van is ill-advised. When the driver got to this area, I was thinking we are gonna have to go in on foot since the streets are really small. Then the driver drove the van into the area! I was half freaking out. I seriously thought he was gonna hit something for sure. But these professional drivers in China have gotten navigating big vehicles in small spaces down to an art. Needless to say I was amazed.

We got out once we got to Shanghai Anime Street. I only have pics of the outside, since most stores do not allow photography of any kind inside. I never really understood that rule.

I think we went into about 8 or 9 stores total, looking for various things. Only 2 stores carried enough TF of interest. One store had a set of the Prometheus Combiner by TFC Toys, Gundog by MakeToys, some figures of Nero Rex by MMC, and some other stuff that I don’t remember. The other store had some figures of Gravity Builder by Generation Toy (GT). Looking at these figures, I was really impressed. The amount of detail on them is amazing. Looking at these figs and comparing them with TFC Toys Hercules, it’s mind blowing to see how far 3rd party transforming figures have come. I was talking with the store owner there, and he really liked the GT set of Constructicons. Doing the conversion of RMB to Dollar, I saw that it was a little cheaper to buy in China. And so I tried to buy GT Scavenger. But then I find out those were for display only and he wasn’t selling them. Bummer. In the end I left Shanghai Anime Street with nothing, but Gemini was able to find some nice Gundam sets.

Isetan

On Sunday, May 29th, Gemini and I roamed around Shanghai during the day. The Shanghai Metro is totally cool; very fast and very easy to use. We looked up places that have toys and went to Isetan. (Sidebar: China blocks Google, including Google Maps. So using some other site for map navigation is preferred, such as Baidu.) Isetan is basically a huge department store. Shanghai has tons and tons of department stores. But Isetan is one of the few that has a dedicated toy section. And of course department stores allow photography, so I was able to capture some pics below.

There were some TFs, but nothing that I can’t get here in the States for cheaper. The store had lots of the G1 Platinum reissues, including Trypticon, the Blaster and Perceptor set, the Insecticons set, and others. On the shelves were also the Combiner Wars G2 color Aerialbots and Stunticons sets. Again, all these can be purchased cheaper in the States for less. So we left without buying anything. It was cool to see all the toys though. Isetan had a really impressive Lego section.

On the way back from Isetan to our hotel, we stopped by Jing’an Temple again. Last time I was here I saw a nice display for Age of Extinction. This time Hasbro/Takara had another booth, but not for TFs. It was their new robot building toy line. I didn’t get the name of this line, so just check out pics below.

Toys R Us

On Monday, May 30th, we had another driver to take us around. We went all over Shanghai on this day. While we were in the Pudong district, we stopped by Toys R Us. Now here we hit the mother lode! Lots of TFs here! And lots of other toys too. I was able to find stuff here that I never saw in the States! Check out pics below.

Most of the figures on the shelves are from Transformers Robots in Disguise. But they had Cominber Wars stuff too. Gemini and I looked hard through the CW section for Groove, since we know this to be an Asian exclusive. We didn’t have any luck finding Groove. But looking at the Takara version of CW figs, it’s clear that the paint job is much better.

See the pic above. In the lower right corner, there is a voyager sized green Grimlock from TF RiD. This is something I never seen before. Looking at it close, this Grimlock is a repaint/rework of Generations Fall of Cybertron Grimlock, with a new color scheme, new head mold, and some minor mold reworks. Very very cool! I have the deluxe size version of this fig, and I feel that’s just too small to be Grimlock. I wanted to get this at the store, but the price wasn’t worth it. I later saw a online retailer here taking orders, at a much more reasonable price. I may get this later.

See the last pic above. They had a whole section of approximately Voyager class figs that I never even knew of! And believe me when I say I’m on top of everything that will come out. At first glance I thought they must be from the TF RiD Line, but the packaging more suggests the Generations line. There are 5 figs in all: Optimus Prime, Megatron, Starscream, and two kinds of Bumblebees (a G1-styled version and a movie-styled version). Gemini has never seen these before either, so we both stood there for a long time to examine these closely. We came to the conclusion that these are basically bigger versions of Generations legend size figs, particularly Starscream. I would find out later, after returning to the States, that these are part of the Cyber Battalion line. But at the time I was beyond thrilled of finding something new, and so I bought Starscream. I wanted to buy them all, but didn’t know if these would be any good. I picked Starscream because he would scale well in the Generations line of figs. Legend and Deluxe Generations Starscream are much too small in CHUG, and the leader class way too big. This one is just right.

Starscream

And so here is Cyber Battalion Starscream, my only TF purchase for this Asian trip. I won’t review this too much. He is very much like the legend figure, but bigger and slightly more intricate.

The last two pics above show him next to legend Starscream. Cyber Battalion Starscream has feet transformation that’s slightly different, and the wing edges can be folded back. The figure only cost about $15 US, so I don’t expect perfection here. He’s a nice figure to pick up and play since he’s so easy to transform, but at the same time he scales nicely with the rest of my CHUG line-up. I like to pick up the rest of the Cyber Battalion figs when they arrive here in the States.

So that’s the re-cap of the toy-hunting aspects of this Asian trip. I had a blast! I want to go back there soon.

Transform and Roll Out!

OK, I am now finally getting back to documenting my monthly purchases. I swear to Primus I will finish this and catch up to where I am currently. Might take many posts, but it shall be done!

• Robots in Disguise Grimlock, Toys R Us, $16.99

• Generations Thrilling 30 Arcee and Chromia, tfsource.com, $31.99

• Combiner Wars Optimus Prime, amazon.com, $24.99

• Combiner Wars Silverbolt, amazon.com, $24.99

• Combiner Wars Thundercracker, amazon.com, $10.99

• Combiner Wars Powerglide, amazon.com, $10.99

• Combiner Wars Windcharger, amazon.com, $10.99

• Combiner Wars Bombshell, amazon.com, $10.99

• Toyworld TW-H04 Infinitor, tfsource.com, $114.95

• Microblaze Creations MBC002 Military Titans, tfsource.com, $109.95

• Masterpiece Ultra Magnus, hlj.com, $122.77

• Masterpiece Bumble, hlj.com, $44.26.

Here are the stats breakdown for the month:

• 1 fig from Robots in Disguise
• 2 figs from Generations Thrilling 30
• 6 figs from Combiner Wars
• 2 Masterpiece figs
• 2 Third Party figs

First up is RiD Grimlock. I think this was my first figure from the Robots in Disguise line. RiD figures as a whole seems cheap and simplistic. But this is Grimlock, so I gave it a shot. I dunno… he’s not bad, but not great either. Fun to play with for a while, but very forgettable once the fig is put away. I don’t think too highly of the RiD line, and this figure doesn’t do anything to change that perception.

Arcee and Chromia are the last of the Generations Thrilling 30 figs that I would buy. I still don’t know where this Thrilling 30 tag comes from… I am guessing maybe it’s the 30th anniversary of TF. Whatever the reason, I have enjoyed figs from this line. Arcee was one that I waited for. We finally get a good CHUG representation of everybody’s favorite female Autobot in her G1 stylings. Alt mode for Arcee looks awesome. Robot mode wise, she’s got some kibble on the back, but nothing I can’t live with. Transformation wise she’s a bit of a shell-former, which again deals with the back kibble. But I think I’m just so happy to get an official CHUG Arcee that I’m willing to overlook these minor shortcomings. Chromia is an excellent figure. I believe Chromia is a minor remold of Transformers Prime Arcee. In robot mode they look very similar, but Hasbro did enough modifications to the alt mode to make Chromia feel like a brand new figure. She looks like those bikes out of Tron. Very very cool! I actually enjoyed playing Chromia more so than Arcee. But I am glad I have both TF fembots in my collection.

OK – Now on to Combiner Wars! This is a series that I have looked forward to for some time. Combiner Wars officially kicked off in January of 2015. CW is a G1-inspired subline in the TF Generations line of figures. The gimmick here is that one voyager sized figure and 4 deluxe sized figures can combine to form a giant robot. Much like the combiners from G1, the toy limb components can be mixed with any bodies in any combination (like Scramble City). Third parties have been doing combiners for quite some time now. So I guess it’s about time Hasbro got on this trend and make some money off their own properties, instead of letting third parties hog all the action.

I wasn’t able to find any deluxe sized figs this month, but I was able to get 2 voyager figs and 4 legends figs in CW. These won’t combine obviously, but I like all these characters so I bought them all.

To start things off, we get CW Optimus Prime. Yes friends, they made OP into a combiner. Not technically G1-esque, but whatever. They are also using this mold as Motormaster (which I will go into in future posts), so this is more of a way for me to check out the mold. The robot mode is kinda blocky. Truck mode is not bad. I’m personally not too impressed with this mold in combiner body form. There is a problem with the hips of the figure. But between robot and truck modes, the construction is solid and robust. So for me, the CW OP fig is just ok.

Next in the line is CW Silverbolt. The famous G1 Aerialbot leader is finally getting a modern upgrade! Yeah, there was an Ultra Class figure released around 2008 (and later repainted into Skyfall). But that figure did not combine, so he was never a true Silverbolt in my opinion. The CW Silverbolt is a G1 homage through and through. In both jet and robot modes, he looks accurate to his G1 self. Transformation may be a tad simple for mature collector, but is still leaps and bounds more involved than the Ultra Class figure (which in my opinion was one of the simplest figures ever made, especially considering something of this size). In combined body mode, this figure really shines. The body mode looks good, is G1-accurate, and provides good mechanics as the center of a giant robot. He connects easily to other limb components, and mechanically well-serves the weight distribution challenges of a combiner. I guess one can always say that the jet mode has too much bulk on the underside, but all combiner jets in this history of TF has had that problem. Overall Silverbolt is a great figure. No wonder this figure is repainted into Cyclonus and Scattershot later.

CW Thundercracker is just a repaint of Thrilling 30 Starscream, while CW Windcharger is a repaint of Thrilling 30 Tailgate. So I won’t go into them too much.

CW Powerglide is a fun little figure. Both robot and jet modes are nice, and transformation feels adequate for a figure of this size. Powerglide is another figure where Hasbro has released an Ultra Class version. But true G1 enthusiasts will always think of Powerglide as a Mini-Bot, and so a legend class fig is much more appropriate. CW Bombshell is another welcome addition to this line. We already got Skrapnel (Shrapnel), so having Bombshell is a must (now I’m hoping they do Kickback). This Bombshell is a terrific figure in my opinion. Both modes are fun to play with. He comes together really nice in the beetle mode. Bombshell is my favorite Insecticon, so I am glad to see Hasbro give him a proper modern rendition.

Now onto the 3rd party purchases for the month. I still have not opened Military Titans as of this writing in April of 2016 (shame on me), so I won’t go into him. I did open ToyWorld Infinitor. This is an homage to Fortress Maximus, but a much more smaller and playable version. I never had the pleasure of the G1 Fort Max toy. There are re-issues out there, but he’s a huge piece that would take up way too much space for me. In the G1 cartoons, Fort Max is a city-size robot (like Metroplex). However in the comics, Fort Max is a large but ordinary size Autobot. I think that is what Infinitor is going for. Regardless, Infinitor is a solid, well-built figure. I can’t say for certain since I never had the G1 toy, but Infinitor feels essentially like G1 Fort Max shrunken down to playable size. He’s very blocky, like you would expect. The Headmaster gimmick is alive and well on Infinitor. He’s got the robot mode, a space cruiser mode, and 2 different city modes (though admittedly the 2 city modes look and feel similar). Overall I think this figure is ok. Get him if you like Fort Max, but not a must have in my opinion.

Finally, we are getting to the Masterpieces for the month. First up is MP Ultra Magnus, a figure that many fans have praised over and over. Some even go so far as to suggest that this should win figure of the year. Overall I think MP Ultra Magnus is pretty good. The alt mode could not be more G1. He scales well with other MPs in this mode. Transformation to robot mode uses the familiar scheme, but there are enough differences in the engineering to make him MP worthy. The robot mode of this figure is where I’m not as impressed. He’s still too blocky for me, and I was really hoping those brilliant Takara engineers could produce a robot mode that is more true to the G1 cartoon UM aesthetic. I hold MPs to a higher standard. Maybe figs like the MP-10 Optimus Prime set the bar too high, and I was expecting too much. Nevertheless, MP Ultra Magnus is a figure that is worthy of your collection. He’s not perfect in my opinion, but still something you should consider if you collect MPs or if you’re a fan of Ultra Magnus.

And last but not least, there is MP Bumblebee. This is a figure that gets no complaints from me whatsoever. We finally have in our hands the ultimate version of Bumblebee in all his G1 glory. The VW bug is nothing short of accurate. Transformation to robot is pure genius. And in robot mode, he looks like he jumped straight out of the G1 cartoon. Takara gave us another MP perfection in Bumblebee. He’s very well built and have amazing poseability. Oh, he also comes with Spike in his Exo-Suit, as seen in the 1986 G1 movie. This Spike figure is not bad, but I got this for Bumblebee, which is what I play with most of the time. If you could buy only one figure that I listed here for this month, get Bumblebee. You will not be disappointed.

That was a lot of TFs for one month. Things will slow down a bit after this. Til next time… Transform and Roll Out!

Happy Holidays! Today I am documenting all the TFs acquired back in Dec of 2014. I fully realize that’s one whole year ago. I know… I’m getting behind on my blogging. It’s just so hard to find the time. I am beginning to think I should make more frequent blog writing my new years resolution. But that’s a story for another day. Here are the TFs for the last month of 2014.

• Transformers Prime Beast Hunters Prowl, Walgreens, $7.74

• MakeToys M-F-B, BBTS.com, $12.99
• DX9 004 Armor Set, BBTS.com, $44.99

• Generations Thrilling 30 Brainstorm, BBTS.com, $26.99

TF Prime Beast Hunters Prowl is a repeat purchase. I got one back in June of 2014. The one this month was a random find at Walgreens. He’s rare, he was only $7.74, so I figured why not. I kept him unopened all this time. Maybe he will be worth something someday.

The DX9 004 Armor is for Age of Extinction Evasion Mode Optimus Prime. That figure is one of the first figs I got from the AoE line, and one of the best from that line. When I heard of a armor upgrade that would make him more like Powermaster Optimue Prime from the fifth toy season of G1, I was immediately intrigued. I never heard of DX9 at the time, but I looked at enough pics online to take a chance on this set. I am happy I bought the set. With the armor attached, the figure feels way more G1 like. I especially like the head mold. There are some tolerance issues though. The feet pieces are way too tight. You will need to either sand down the pegs on the feet pieces, or make the feet holes bigger on the figure. I only tried this upgrade set in robot mode. These same pieces also can attach in alt mode, but I didn’t try it.

The MFB from MakeToys is acronym for My First Blaster. I am told this weapon for Swerve makes an appearance in the comics by IDW. I won’t comment anymore as I’m no authority on the IDW-verse of TFs. The weapon itself is pretty cool. Be aware it does require some assembling. I’m a terrible model builder, so I already broke off one piece when assembling this. Also, this weapon is designed to go with MakeToys Trash-Talk, or their version of Swerve. This weapon will not operate with the official Hasbro Generations 30 version of Swerve (coincidentally also purchased in June of 2014). I bought it thinking that it would. The pegs are not the same size. Should have done my research first.

Last but not least, there is Generations Thrilling 30 Brainstorm. I first saw this at BotCon 2014. I could not believe my eyes when I saw this. I mean… if Hasbro was gonna venture into Headmasters, that opens up a whole world of possibilities on what they are willing to re-make in this modern era. I’m salivating just thinking about it! Anyways, Brainstorm is an excellent figure. He’s fairly simple in transformation, but in my opinion that’s a good thing. Modern TFs are so darn complicated sometimes that I just want something I can pick up and play. Brainstorm fits that bill. If I have the figure handy, I can sit there and transform him back and forth repeatedly, like I did all my TFs when I was a kid. Both modes look nice. As a voyager figure, he’s bigger than some of the third party Brainstorms that have been produced (such as Smart Robin). Oh, by the way, there are two versions of this figure. I got the fixed version, code 42791. Click here for more detail.

OK, that does it for the figs in 2014. Now I can move onto 2015… in 2016. I know… I suck. But I will get this done and get up to date like I used to be. Transform and Roll Out!

It seems like forever since I wrote any entries in this blog. Finding the time to do so has been extremely difficult. Today I took the day off from work to take care of some personal business, which turned out to be faster than expected. This left we with some extra time that I’ll devote to my TF blog.

Here are the purchases for November of 2014.

• Generations Thrilling 30 Cosmos and Payload, Target, $9.49

• Age of Extinction Snarl, Target, $14.24

• Age of Extinction Hot Shot, Target, $14.24

• Fall of Cybertron Air Raid, amazon.com, $17.80

• Masterpiece Wheeljack, hlj.com, $49.10

Cosmos is a figure I wanted for some time now. Back around either 2009 or 2010, Hasbro made some legend size figures as remakes of G1 Minibots in the Classic 2.0 lineup. I managed to find them all, except for Cosmos. He was the rarest one of the bunch, and scalpers wasted no time jacking up his price to around $50. No way I’m paying those prices for a tiny legend figure. So when I heard of this Cosmos, I had to get it. I never had the Classic 2.0 figure, but I’m willing to bet this Generations Cosmos is better in every way. The Generations figure is slightly larger, transformation is quite remarkable for a toy of this size, and he looks all around better than his Classic 2.0 counterpart in both modes. At around $10 he also comes with Mini-Con Payload. All in all a very nice deal for the price.

I believe this should be the last of the Age of Extinction figures in my collection. AoE figures as a whole is a sorry lot. Hot Shot is a testament to that sentiment. I was told repeatedly not to buy AoE Crosshairs. Hot Shot is a exact repaint of the mold, and now I know why. His robot mode is awful. There’s so much kibble hanging off the back it’s ridiculous. Even the slick car mode won’t save this atrocious figure. I bought Hot Shot because he reminds me so much of Tracks. I’m willing to bet that’s what Hasbro was counting on, and I fell for it head first. There are some bright spots in the AoE lineup (such as Evasion Mode Optimus Prime, Hound, and Drift), and Snarl is one of them. This is one of the better Dinobot figures out of AoE. I like the Dino mode, I like the robot mode, and transformation is fun. I don’t much care for the neon transparent green, but the mold itself is well engineered. There’s probably some kind of convention exclusive out there that has this figure repainted in G1 colors. That would make this fig even better.

I have written about this Japanese Air Raid, nearly a year ago. I can’t believe I’m so behind on documenting the Transformers for every month. Anyways, this Air Raid was bought during Black Friday weekend of that year. The Japanese version is much more closer to G1 colors than the US version. And getting a Japanese deluxe size figure for only $17 is a steal, so getting this was a no-brainer. Though I will say that the construction of this figure doesn’t seem to be as sturdy as the US figure.

Last but not least, there is Masterpiece Wheeljack. This is a figure that deserves the Masterpiece label. Takara set the var very high when they released Masterpiece Sideswipe. I am completely satisfied with that figure. The 2nd mold they released was for Prowl/Streak/Smokescreen. That figure is nice too, though not as good as Sideswipe in my opinion. Wheeljack is the third mold in this series. Takara managed to capture all the things they did right with Sideswipe when they produced Wheeljack. Transformation is ingenious, and construction is solid. The alt mode is something Lancia felt very comfortable in putting their logo on, and the robot mode is G1 show accurate perfection. Great poseability and great playability. This piece is every bit as good as MP Sidewsipe. Do not call yourself a true TransFan if MP Wheeljack is missing from your collection.

More to come soon… Transform and Roll Out!

Generations Thrilling 30 Roadbuster is a figure I have looked forward to for some time. Third parties have made their versions of this character, which are good. However I really don’t feel like paying third party prices for everything. Hasbro must have saw a good opportunity here and delivered what I wanted.

This official Roadbuster is a nice fig. Some fans have complained about his simplistic transformation, but I like the fact that you can easily pick up and play with the figure. Both modes look nice. Poseability in robot mode is great. Vehicle mode is robust and solid. He also comes with weaspons galore. He comes with 6 weapons! You read that right… six! These weapons can be arranged in many different configurations. That’s even more playability for you.

However, Roadbuster is kind of plain in his looks. This is because Hasbro has provided decals for you to put on, just like the old days of G1. Here’s a pic of him without the decals.

Below is a similar pic of him with the decals applied. Check it out!

The decals really add that extra something. The extra details add more life to the character.

However I should point out I did not apply all the decals. These were not the best decals. They were badly cut, and many of them could not be placed where they’re supposed to go without some custom trimming. Some decals simply cannot fit into the space designated. The instructions were also inadequate as far as showing where they need to go. It feels like perhaps these decals were a after thought.

I put on as many as I can. Below are more pics of Roadbuster with the decals.

Go Roadbuster! Transform and Roll Out!

It’s been a while since I did a post about what’s on my shelf. So I’m doing one today.

Same pic, different angle.

From left to right

Lower shelf: Thrilling 30 Rhinox, Thrilling 30 Rattrap, Mastermind Creations Felisaber

I especially like the three gestalts on the top shelf. Feral Rex and Giant have been featured elsewhere before in this blog so I won’t go into detail again. Combiner Wars Menasor is Hasbro’s official update of the Stunticons in combined form. Compared to Fans Project’s Intimidator, Menasor has it’s pros and cons. Individually I like the Hasbro figures better. They are larger, sturdier, easier to transform, and more fun to play with. However in combined form, FP has the better looking Menasor. Intimidator also stays together better than Combiner Wars Menasor, as the Hasbro figure feels like it could quickly fall apart. However I should point out that the Hasbro figures feel more like a true combiner. The leg components are not simply adding on top of Motormaster’s legs, like in FP’s offering.

Poor Rattrap and Rhinox. They are the only good guys here. Technically they are not Autobots, so I don’t have a single Autobot in this post. Decepticons forever!

Transform and Roll Out.

October always seem to be a busy month in terms of TF activity. In October of 2012, I set a personal record for most TFs purchases in a month. This month I may have set another new record, of a related but slightly different category. So sit back, relax, and enjoy. This will be a long post.

• Age of Extinction Drift, Toys R Us, $24.99

• Age of Extinction Optimus Prime Evolution 2-Pack, Toys R Us, $44.99

• MakeToys Quantron, tfsource.com, $399.99

• Generations Thrilling 30 Jetfire, bbts.com, $46.99

• Fans Toys Scoria, bbts.com, $199.99

• Transformers Prime Beast Hunters Cyberverse Optimus Prime, bbts.com, $4.99

• Skrapnel with Reflector and Tailgate with Groundbuster, bbts.com, $21.99

• Nemesis Prime with Spinister and Cliffjumper with Suppressor, bbts.com, $21.99

• Generations Thrilling 30 Waspinator, Skids, Goldfire, Dreadwing, bbts.com, $59.99

• Generations Thrilling 30 Crosscut, Nightbeat, Windblade, Jhiaxus, bbts.com, $59.99

Age of Extinction Voyager Drift is a repaint of Skyhammer from Dark of the Moon. It appears they keep using this mold for Movie-verse figs. Skyhammer is one of my favorite figs from DotM, so I had to have this Drift. The figure is exactly the same, other than the head mold, the blue paint scheme, and the swords. Drift’s swords are kinda cool. He can use them separately in each hand, or have them combine into one huge sword.

I bought the Optimue Prime Evolution 2-Pack purely for the repaint of the Classic Prime mold. I love that figure, and this shiny new paint had my attention. The other Prime figure here is a repaint of Evasion Mode Optimus Prime from Age of Extinction. In retrospect, Evasion Mode Prime is one of the only few good figures from TF4, so I’m glad I have this repaint. I did not open this 2-Pack. The collector in me will probably just hold on to this as mint.

When I first head of MakeToys Quantron, I already made up in my mind that I had to have it. Quantron is an homage to the Technobots of G1, my favorite Autobot combiner team to come out of that era. Sure the Aerialbots are the most famous, but I think the Technobots are the coolest. I still remember buying Afterburner, my first fig from this awesome team. I loved his futuritic motorcycle mode. MakeToys Quantron wasn’t cheap. And I’m ashamed to say that as of this writing I still have not had the chance to play with this at all. I barely opened the box a few weeks ago to inspect the contents. Life as a working adult is way too hectic, and all of you reading should rue the day when you don’t have the time to immediately enjoy a $400 toy. But I promise to get to Quantron soon. All reviews I have seen gave it high marks. I know I will not be disappointed.

I have repeatedly mention how cool Generations 30 Jetfire is elsewhere in this blog, so I won’t do it again. Just know that he is awesomeness manifested in physical form. Go out and get yours now.

Masterpiece scale Dinobots is something that many 3rd parties are jumping into lately. These figures are usually $200 each… not cheap by any means. They all look pretty nice. But if I’m to get one, I want to go with a 3rd party that I trust. And so comes Scoria by Fans Toys. I was thoroughly impressed with Quakewave, so I had to give their interpretation of Slag a shot. Scoria does not disappoint. In robot mode he’s big and beefy. Construction is solid, and the transformation to dino feels familiar and refreshing at the same time. Scoria looks awesome in dino mode. I wish I have some pics handy to show him off. Maybe I will in a separate blog post.

I got TF Prime Beast Wars Optimus Prime purely because he was on sale at BBTS. I saw the fig quite frequently on the racks at stores like Walmart and Target and have always wondered if he’s any good. He’s not. A required purchase this ain’t. I already wasted too much time writing about this figure.

Nemesis Prime and Cliffjumper are just repaints of Optimus Prime and Bumblebee, respectively. So I won’t talk about them too much. Skrapnel (or Shrapnel) is a cool little G1 Insecticon. This is probably the first time in a long time that Hasbro has made a G1 looking Insecticon. Tailgate is using a mold that will be repainted into Windcharger. This mold is ok. I got this to have a distinct mold for Tailgate, because I think the Reveal the Shield Windcharger is a much better mold and that will be my Windcharger.

The remaining deluxe Generations Thrilling 30 figures I’ll just quickly mention. Goldfire, Nightbeat, Dreadwing, and Jhiaxus are repaints of a figure in the same lineup. I really like Jhiaxus though. I’m liking the color scheme, and Hasbro reworked the mold to be different enough that it feels like a distinct figure. Windblade is a brand new mold. She looks pretty cool in both modes, but the figure itself is kinda flimsy. Waspinator is very cool! This is probably the coolest Waspinator that Hasbro has ever made. I like the wing gimmick. Skids and Crosscut are repaints of each other, though this mold is the first time we’re getting them. I was really looking forward to Skids, since many reviews praised the figure. The car mode is nice, but the robot mode has some poseability issues. There’s so much going on in robot mode that all the features start to block on itself. Still, all the weapons on Skids (and Crosscut) does make for a nice looking figure, when you can get them to pose the way you want.

Ok… that was a lot of figs! 27 total by my count. 23 if you don’t count the Mini-Cons of the Generations Thrilling 30 legends figs. My previous record for single TFs in a month is 24, so this month does surpass that if Mini-Cons are included as separate figures. However there’s one thing that this month sets a record for… and that’s the amount spent! Adding all these up, the total TF spending this month comes to a whopping $885.90! Ouch. That’s a bit much by anyone’s standard. Quantron and Scoria accounts for $600 by themselves alone. I really need to start selling off whatever I don’t play with anymore. Time to list more stuff in my Sales Section.

October is the last month of extravagant TF spending for 2014. Things will die down for the rest of the year.

Oh, one more thing, at the end of Oct 2014 I took another pic of my orange TFs. Check it out.

More to come… Transform and Roll Out!