March of 2019 is Siege Month! All figures except for one (and one accessory) are from War From Cybertron: Siege.

• War For Cybertron Siege Starscream, Walmart, $29.84

• War For Cybertron Siege Soundwave, Walmart, $29.84

• War For Cybertron Siege Ultra Magnus and Shockwave, bbts.com, $99.99

• War For Cybertron Siege Chromia, Target, $19.99

• War For Cybertron Siege Prowl, amazon.com, $19.99

• Warbotron WB03-D Double Strike, bbts.com, $51.99

• Fans Toys FT-08 Grinder Dinohead, bbts.com, $17.99

Starscream

First up in this WFC Siege month is none other than Starscream. And here we have something truly special! Ladies and gents, for the first time in TF history, HasTak has given us Seekers that transform into their Cybertronian alt mode from the very first G1 episode! We all know how that first episode started. Bumblebee and Wheeljack was looking for some energy conductors. On the way back to Iacon, they were intercepted by Seekers of various colors. The Seekers transformed into what fans dub as tetra-jets, and the chase was on!

The tetra-jet is something completely imagined by the show animators, in that this was the Cybertronian alt mode of robot toys that transformed into F-15s. Of course the transformation sequence from robot to tetra-jet was entirely made up and don’t make much mechanical sense. But as fans we accepted the show’s creativity, and welcomed the fact that Cybertronian robots would not have Earth alt modes when they were on Cybertron. The toys’ alt modes were all Earth in origin, and in the 80s it was never conceived that there would be toys that transform into a mode made up by the cartoon artists.

Fast forward 35 years, and HasTak has made a transforming tetra-jet to robot figure a reality! Having this Voyager-sized Starscream as a tetra-jet is something magnificent to behold. The design of the tetra-jet is slightly modified for the War For Cybertron show, but it still heavily resembles the G1 tetra-jet. The overall triangular scheme is clearly seen. What impresses me most about this figure is how the designers are able to take various design bits of the robot mode and have them transform into mechanical elements of the tetra-jet that makes sense. For example, the side shoulder protrusions of the standard Seekers (formed from the front intake of the F-15) comes together and forms the tip of the tetra-jet. And the circular chest design bits in robot mode forms part of the rear thrusters. The toy designers thought through this transformation, and it shows.

In alt mode, Starscream looks great in his standard grey with bits of blue and red. The tetra-jet is a bit bulky at the bottom where the legs go. But the rest of jet mode is a sleek representation of a Seeker dominance vehicle in the Cybertroian skies. Cockpit of Starscream’s tetra-jet is still orange, though why a Cybertronian jet would need a cockpit is anyone’s guess. Guns are attached under the wings. The alt mode is a solid and cohesive whole with no loose or dangling parts.

In robot mode, the figure heavily resembles the look of the classic Seeker that we all know. This is a spectacular achievement by the HasTak toy design team. This robot mode could easily pass for the robot mode of a classic Earth-style Starscream. This resemblance lends credence to the fact that this is the same character on Cybertron, with a Cybertronian alt mode, and later transcanned to have an Earth alt mode. The cockpit down the center chest area is “fake”, in that the module is purely decorative and doesn’t transform into the cockpit of the jet. All other pieces serve a mechanical purpose.

Construction of the figure is also superb. All joints are at the right tolerance. Pieces come together when they should, and separate when they need to. All in all this is a great figure. G1 fans will undoubtedly not pass this up. I give the figure the highest possible recommendation.

Soundwave

Next up in the WFC Siege lineup is Soundwave. This is another character where I was really looking forward to what HasTak would come up with as the origin Cybertronian interpretation.

I’ll start with the alt mode of WFC Siege Soundwave. I was really hoping this origin alt mode would be that statue looking thing that we saw Soundwave transform into in the very first G1 episode. Unfortunately, that is not the case. HasTak chose to go with something more utilitarian for WFC Seige Soundwave in that he transforms into a Cybertronian aircraft. It’s a bit of a bummer, in that I think they could have easily made a Soundwave figure that is able to transform into the statue/lamppost/highway-callbox thing. And I could be wrong here, but I don’t think Soundwave ever transformed in the WFC show. So this flying alt mode doesn’t do all that much for me. But this what we got. It is what it is.

The alt mode looks ok. It’s a Cybertronian form, so the toy designers could fancy this into any appearance they like. If you imagine how Soundwave would look as a jet based on how he looks in robot mode, it probably would not be too far off from the alt mode of WFC Siege Soundwave. The overall shape is very blocky. The tape deck area in robot mode forms the very back of the vehicle. Two wing/thruster bits that I assume are Cybertronian jet thrusters protrude at an angle, and these are the only major bits not found on Earth mode Soundwave. Overall I’m not too crazy about this alt mode. It feels very retroactively forced on a robot design that was not meant to be a starship.

As for the robot mode, it’s classic Soundwave. The blue and grey colors, overall rectangular proportions, the well-known head design, and the iconic chest tape deck, it’s all there. The colors and shape of the arms and legs look like it’s straight out of G1. The battery-formed shoulder cannon mounted on his right is there as well. All other cassette player bits, on the crotch and legs, are all present and accounted for. The only big difference from the Earth form in robot mode is the back, in that the previously mentioned Cybertronian jet thrusters are placed there. But for a robot mode that has to account for flying apparatus bits, that’s where I would expect them to go. The tape deck ejection mechanism works fine and well. In later months I would purchase his infamous cassette minions (released as Master-sized figures in WFC) and they can be placed inside.

As for weapons, WFC Siege Soundwave comes with his twin iconic battery-shaped modules. In robot mode, one becomes a cannon mounted on his right shoulder, and the other one transforms into a hand-held blaster. Also included is another rifle. This weapon can be unfolded to look like a sniper rifle, or folded to look like another hand-held blaster.

And just like Starscream, I find no issues with the construction of the figure. Despite not having an alt mode that I had hoped for, Soundwave still gets a recommendation.

Ultra Magnus

Ultra Magnus and Shockwave were purchased together as one order item. That’s how they sold it. No discounts were offered when bought this way. It is now Dec 2021, and on Amazon you can still get them both at slightly below regular price. I know I have seen both of these in the $30 range, in 2020. TF prices are like stocks. You never know how they will go.

Ultra Magnus is a terrific update. This character was given a great treatment in Combiner Wars. WFC continues that trend and makes even more improvements on everybody’s favorite City Commander. In alt mode, instead of being a car carrier, Siege Ultra Magnus looks like some kind of Cybertronian armor weapon vehicle. It looks close enough to his Earth alt mode, but at the same time different enough to not simply be an Earth-mode derived mode. While we’re on that topic, Ultra Magnus’ alt mode always looked a bit Cybertronian, even in G1. The front cab looks Earth mode enough, but the trailer section is definitely Cybertronian. So is it possible he only partially transcanned? It’s worth exploring.

Siege Ultra Magnus feels very solid in alt mode. The unit feels like one cohesive whole, despite the entire mode being puzzle-formed together like Ultra Magnus typically is in this mode. 5 weapons are attached in this mode for a very impressive look: 2 black blasters, 2 white missile launchers with red missiles that he’s had since G1, and a large silver rifle, all mounted and ready to intimidate some lowly Decepticon scum. The whole thing rides on a total of 10 wheels, and the unit does sit well on a flat surface. The colors are distinctly Ultra Magnus, with the cab white, the trailer blue, and top section red. The shape of the front cab is distinctly Cybertronian. All in all a very nice alt mode.

In G1, Ultra Magnus had 2 robot modes. There was the smaller robot transformed solely from the cab, a white repaint of the famous G1 Optimus Prime toy. This smaller robot was never seen on-screen in G1. Then there’s the bigger robot formed from both the cab and trailer, the appearance that we’re all familiar with from the cartoons. Siege Ultra Magnus faithfully reproduces this scheme. The cab is capable of forming a smaller robot resembling Optimus Prime. (sidebar: part of this Ultra Magnus mold would indeed be reformatted into WFC Siege Galaxy Upgrade Optimus Prime, to be released later, but that’s for another day) In this mode, Ultra Magus is well-proportioned. Joints are at the right tolerances. For a blocky figure, the articulation is adequate. Transformation from cab to this robot mode is nothing we haven’t seen before. But this tried and true formula works for this character, and I’m never a proponent of messing with what works. I’m happy this mode is included, but we didn’t pay the $50 price tag to have Ultra Magnus in this mode.

To get Ultra Magnus into the robot mode that we all know and love, the trailer disassembles and acts as armor over and on top of the smaller robot mode. 3Ps have implemented such a mechanism already, most notably the FansProject City Commander Add-On Set. HasTak has explored this scheme too, with Evolution Optimus Prime and Rodimus Prime. I believe this is the first time that HasTak has done this for Ultra Magnus. In G1, the trailer isn’t really so much an armor for the cab. The trailer gets transformed into the main body, and then the cab gets attached to it behind the back. All other Ultra Magnus figures in the modern day kind of has the cab and trailer transform as one. So it is indeed a nice treat to see that WFC Siege implemented an armor attachment mechanism for the smaller cab robot to fully form Ultra Magnus.

And what a glorious robot mode this is. Fully armored up, Ultra Magnus is every bit his G1 self. There is no mistaking this character for any other. His entire design aesthetic, down the to the last detail, is based on G1. The colors, the overall blocky shape, the shoulder missiles, all G1 derived. Design of the chest, arms, legs, and head, all taken from G1. With this robot mode, it’s clear that there was very much an Ultra Magnus on Cybertron before coming to Earth. Transformation to this mode is very much a puzzle forming adventure, but you kinda expect that with this character. It’s fairly obvious where each armor piece should go, and the entire package comes together really well. Articulation in the mode suffers a bit because he’s so blocky, but what’s offered is sufficient.

I give this Ultra Magnus figure the highest possible recommendation. Yes by now we all know how he ends up in the Netflix War For Cybertron series, but don’t let that discourage you. And maybe you expected a $50 figure to be true leader size. Don’t let that discourage you either. The figure is made to scale nicely with other cast members from WFC. The cost of admission for this figure is paid in full with the number of modes and accessories. He can deal with that now. I know you can.

Shockwave

Shockwave is another character that got a great update in WFC Siege. He is also leader class. Or more accurately, he is sold as leader class. There is the core figure of Shockwave, which is voyager class size. Then there are the accessories that can be added on top of the core figure, in both robot and alt mode. All this in one package is how Hasbro justifies the $50 price tag.

Let’s take a look at the core figure first. In robot mode, Shockwave is every bit his G1 self. All the classic iconic features of Shockwave are present, from the purple colors, the left-arm blaster, the left-arm hose attached to his backpack, the his cyclops eye. At voyager class, he scales well with other Decepticons in WFC Siege. The figure is well built, no joints too loose or too tight. Ample articulation points gives the figure some great poseability, and solid engineering means he can actually hold those poses. Transformation to alt mode follows the standard Shockwave scheme, with some modern variations. Some aspects of the transformation seems borrowed from both Fans Toys Quakewave and MP-29 Shockwave, but on a CHUG figure the overall scheme is way more playable. WFC Siege Shockwave still transforms into the iconic space gun that we all know and love, and it’s good see HasTak did not butcher this into something different (like a Cyberverse Shockwave, the Fall of Cybertron Shockwave, or the Alternator Shockwave).

Now on to the accessories. In robot mode, the accessories can be attached in a number of different ways. But the default configuration is some large flat gun pieces added onto the bottom of the feet, some wing and gun pieces that are attached to the shoulders, and a backpack cover. Shockwave looks quite menacing in this mode, and the overall feel does reflect a mad scientist that decided to perform Frankenstein-ish experiments on himself. In the space gun mode, the extra accessories are attached so Shockwave looks more like a genuine Cybertronian jet. It does look cool, and give more credence to the fact that Shockwave can fly around in alt mode.

So do I recommend this figure? The short answer is yes. The core Shockwave figure without the accessories is a terrific modern day CHUG update of the Decepticon mad scientist. This is probably the first real update of Shockwave in CHUG, and the core figure does not disappoint in any way. Now for the long answer. The extra accessories are kind of unnecessary, in my opinion. They’re cool, but don’t really add that much to the character. In fact, I think it sort of turns Shockwave into a different character, one that wasn’t explored very much in the G1 cartoons or the WFC Netflix series. And speaking of the WFC series, we never saw Shockwave in any of these enhanced modes. It feels like HasTak made these extra things to justify Shockwave being a $50 figure. I would have much rather they released a $30 figure of just the core Shockwave minus all the extras. But like I said already, this is the ultimate CHUG Shockwave that has been produced. So if you want one, you have to buy it with all the extra baggage. And as of this writing, I will emphasize again that you can buy this for less than MSRP on Amazon. Logic dictates you buy this now if you haven’t already.

Chromia

Here we have another rework off of the now famous Fembot deluxe mold. We got Moonracer and Novastar in Power of the Primes, so it’s no surprise that we would get Chromia in WFC Siege. Personally, I would have been ok if they didn’t make WFC Siege Chromia. I would have simply used Thrilling 30 Chromia to complete the Fembots. I think I like Thrilling 30 Chromia better anyways, if only for the variety.

WFC Siege Chromia is a rework because it’s not an exact repaint. The head mold is different. She gets different weapons. Chromia gets something that more resembles a sniper rifle, and we saw her use this several times in the WFC Siege show. Some pieces in alt mode are molded differently too. Chromia gets back pieces that covers the rear wheels, the cockpit piece clearly looks different, and she gets 4 molded-on front headlights. I commend HasTak for providing these variations to the same mold, to counter what would otherwise be a quick cash-grab. WFC Siege Chromia does not come with that Combiner Wars attachment.

G1 purists will undoubtedly get this Chromia to complete all 4 of the original Fembots (along with this Elita-1 or the upcoming Netflix Elita-1). For everyone else, this Chromia is an optional purchase if you already have Moonracer or Novastar. But buy this rework if you want. No judging here.

Prowl

WFC Siege Prowl follows that “Prowl” formula that all TransFans since G1 have come to memorize by heart. By “Prowl” formula, I mean that the transformation is tried and true for this character, the figure is deluxe size, Prowl colors of black and white are used, the alt mode is a police sports car of some sort, and HasTak will undoubtedly repaint this mold into Bluestreak and Smokescreen. WFC Siege Prowl certainly offers no deviation from this formula, but it’s not necessarily a bad thing.

WFC Siege Prowl is deluxe size, as you would expect. The alt mode, while Cybertronian, doesn’t offer much originality when compared to his Earth alt mode of a Nissan Z throughout the different decades. In fact, if you told me that this alt mode is a concept Nissan Z, I would have believed it. The writing of “POLICE” that are usually on Prowl’s doors are now replaced with Cybertronian font. The wheels are clear instead of black. The police sirens on the car’s roof is found here as well, but they look at bit too Earth mode if you ask me. The alt mode comes together well as one cohesive whole. All in all, a solid alt mode, but not much originality in that this is supposed to be in Cybertronian form.

Transformation is classic Prowl so I won’t describe it too much. Car hood becomes the chest, arms come out from the sides, rotation at the waist, car back becomes the legs and feet, car doors swing out to form the wings. You’ve seen this script many times.

In robot mode, WFC Siege Prowl is iconic Prowl. No one would mistake this bot mode for any other. I really don’t have much to say about the robot mode, because this is Prowl through and through. That’s a good thing, as this Prowl is supposed to represent the G1 version of this character on Cybertron. This figure does not come with shoulder rockets, and that’s a shame, probably the only aspect that make this less Prowl than usual. The roof sirens in alt mode can be detached and placed on his rifle, or be attached to his forearms to be used as a shield.

If you collect the WFC Siege line, you will undoubtedly buy Prowl regardless of what I say. He’s an iconic G1 character that no true G1-er would pass up. The WFC Siege version does Prowl very well, in that it’s G1 in all the right ways. The only critique I can offer here is that it may be too G1. The alt mode looks too close to what he would be on Earth, and I just can’t imagine Cybertronian vehicles resembling Earth vehicles that much. But as far as having a CHUG Cybertronian Prowl, this fits the bill.

Double Strike

Warbotron Double Strike got a dedicated review already, so go check out that post for all the details. Double Strike is Warbotron’s homage to Strafe from the Technobots. In short, this is a good figure, but not as good as Turbo Ejector (Afterburner).

As of this writing, Double Strike and Turbo Ejector are the only Warbotron Technobots I have. I really want to get the rest. I was overall not terribly impressed with MakeToys Quantron, so I sold that set and re-invested in the Warbotron set. I never got the official Combiner War Technobots set, just Scattershot by his lonesome. That is bizarre, considering how much I love the Technobots. Perhaps another 3P will attempt the Technobots. Would Fans Toys be brave enough to do this? Let’s hope so.

Grinder Dinohead

The last item featured this month is an accessory for Grinder. More specifically, this alternate dino head replaces the default dino head that comes with Grinder. I have mentioned repeatedly on this blog that I feel Grinder’s T-Rex mode make me think of Barney. The problem is the head. Fans Toys has heard your complaints and released this alternate Dino head.

In short, this head is much, much better. I didn’t really look at what is changed on this head, but it certainly doesn’t make me think of Barney anymore when I see Grinder in T-Rex mode. See for yourself. With the alternate head attached, Grinder resembles Grimlock from the G1 movie much more closely. This accessory piece goes for $17.99. At this price, every Grinder owner should get this. However I have seen this marked up to about $100, in this era of global shortages of just about everything. Fans Toys items always gets marked up these days, but this is just crazy! I can’t say if FT will make more of these, but I personally would not pay $100 to get one.

More TFs are to come in the months that follow. This is my last post for 2021. Happy New Year! Transform and Roll Out!
 

EDIT 2021/12/30:

I later found that I took some pics of all the Siege TFs this month. Here they are. Enjoy!

I recently acquired Double Strike. This is Warbotron’s MP interpretation of Technobot Strafe. Since I did a review on Turbo Ejector (Afterburner), I’m gonna do a review on Double Strike as well.

I got Double Strike at a sale price of $51.99 (MSRP is $95.99). That’s almost half off! Since I was so impressed with Turbo Ejector, I had to get Double Strike to check it out for myself. Is he as good as Turbo Ejector? Let’s find out.

We will start with the box.

Double Strike is packed in the same kind of box as Turbo Ejector. And that’s a good thing, because these boxes are so high quality. They are composed of hard cardboard, and there’s a tab on the side for easy pull out. I didn’t include the outer box wrap in the pic above, but Double Strike has one too.

Box flap opens to reveal another good artwork.

In the packaging.

Double Strike is about the same height as Turbo Ejector. That makes sense as they both form the arms. I think Double Strike weighs a bit less than Turbo Ejector, but not my much. The figure is solid, with a nice hefty feel for a toy of this size.

Pic of lower back and legs. Notice how well the wings compact onto the back of the legs.

Ready for battle.

Another action pose.

Close up of the face. Decent sculpt with awesome light-piping.

Watch me balance on 1 leg!

Just like Turbo Ejector, Double Strike is well built. All joints are nice and tight, and some are clicky too. I detect no tolerance issues. All weapons fit where they are supposed to without it being too loose or too tight.

Transformation to jet mode is super straight forward. Just like Turbo Ejector, Double Strike follows the same overall scheme of his G1 predecessor. If you read the instructions, it will seem like the transformation is more complicated than it really is. I suggest just going straight in without looking at the instructions. Anyone familiar with Transformers in general shouldn’t have any problems.

The arms go up and over the back, and sits on top of the jet alt mode, instead of on the sides like G1. Waist rotation is required. Snap legs together and push in toward the waist. Unfold the wings. There is a back assembly with missile that stretched down and pegs in. Attach twin guns at front of the shoulder. That’s about it.

Pics of the jet mode below. It looks good and resembles G1 Strafe quite well. No TransFan will mistake this jet for anyone else.

View from the side.

View directly from the front.

View directly from the back.

Bottom view.

Rear landing gears don’t retract. The front landing gears can be rotated up, but they are still visible from the side. In the pic above, I got one front landing rotated up, and one left out.

An alternate wing configuration is in the pic below. This is actually the official Warbotron configuration. But I prefer a more G1 look, so in all other pics I had the wings configured more like G1.

The missile launcher on top of the jet deserves its 15 minutes. This thing shoots far! Be careful when firing. You’ll shoot your eye out, or worse yet, lose the missile.

Overall, I recommend Double Strike. I don’t think he’s as good as Turbo Ejector, but he’s still another solid addition to the Warbotron Technobot team.

Will I get the rest of the team? Only time will tell. Transform and Roll Out.
 

MakeToys Quantron is a third party homage to my favorite Autobot combiner team, the Technobots. I got this set back in October of 2014. A quick search for them on this blog revealed that… gasp!… I never mentioned them again since that post! That’s a crime. So here they are getting their 15 minutes.

Packaging and Manuals

Alt Modes

Robot Modes

Combined Mode

I’m going to quickly list out some things I like about this set, and some things that I don’t.

Pros

• Metalstorm (Scattershot) is a great fig. I thoroughly enjoy this fig, in both robot and alt modes
• Materials used for every figure in the set is quite good. High quality plastic all around.
• Quantron (Computron) combined is impressive.
• There are plenty of detail on each fig. No plain or simple looking figures here.
• Relatively G1 accurate, though that’s debatable.
• Plenty of accessories to satisfy even the most demanding accessory fiend.

Cons

• My biggest gripe: Overheat (Afterburner) has to be the left arm, and Blindfire (Strafe) has to be the right arm. WHAT?! That’s reversed! MakeToys, why?!!!
• Combining into Quantron is more work than fun. So much to assemble – it feels like putting together LEGOs and not transforming.
• Too small for today’s standards, even for CHUG scale. The only one that’s ok is Metalstorm, the rest too small.
• Transforming each figure is more difficult than it should be, mostly because they’re so small.
• SonicDrill (Nosecone) is a horrible fig – poor construction and poor design. A very unstable fig that doesn’t work well in either robot or alt mode.

This set was ok, but it was far from perfect. I no longer own Quantron; I sold the set some time ago. Most 3P TF retailers are now clearing out this set for around $200 to $250.

The only other 3P Technobot set that is available at this time is Warbotron Computicon. I have one figure in this set: Turbo Ejector (Afterburner). Turbo Ejector is leaps and bounds better than Overheat. Though I’m told that Turbo Ejector is the best one in the set. I may get the rest of Computicon. Or not.

Technobots rule. Transform and Roll Out.

 

October always seem to be a busy month in terms of TF activity. In October of 2012, I set a personal record for most TFs purchases in a month. This month I may have set another new record, of a related but slightly different category. So sit back, relax, and enjoy. This will be a long post.

• Age of Extinction Drift, Toys R Us, $24.99

• Age of Extinction Optimus Prime Evolution 2-Pack, Toys R Us, $44.99

• MakeToys Quantron, tfsource.com, $399.99

• Generations Thrilling 30 Jetfire, bbts.com, $46.99

• Fans Toys Scoria, bbts.com, $199.99

• Transformers Prime Beast Hunters Cyberverse Optimus Prime, bbts.com, $4.99

• Skrapnel with Reflector and Tailgate with Groundbuster, bbts.com, $21.99

• Nemesis Prime with Spinister and Cliffjumper with Suppressor, bbts.com, $21.99

• Generations Thrilling 30 Waspinator, Skids, Goldfire, Dreadwing, bbts.com, $59.99

• Generations Thrilling 30 Crosscut, Nightbeat, Windblade, Jhiaxus, bbts.com, $59.99

Age of Extinction Voyager Drift is a repaint of Skyhammer from Dark of the Moon. It appears they keep using this mold for Movie-verse figs. Skyhammer is one of my favorite figs from DotM, so I had to have this Drift. The figure is exactly the same, other than the head mold, the blue paint scheme, and the swords. Drift’s swords are kinda cool. He can use them separately in each hand, or have them combine into one huge sword.

I bought the Optimue Prime Evolution 2-Pack purely for the repaint of the Classic Prime mold. I love that figure, and this shiny new paint had my attention. The other Prime figure here is a repaint of Evasion Mode Optimus Prime from Age of Extinction. In retrospect, Evasion Mode Prime is one of the only few good figures from TF4, so I’m glad I have this repaint. I did not open this 2-Pack. The collector in me will probably just hold on to this as mint.

When I first head of MakeToys Quantron, I already made up in my mind that I had to have it. Quantron is an homage to the Technobots of G1, my favorite Autobot combiner team to come out of that era. Sure the Aerialbots are the most famous, but I think the Technobots are the coolest. I still remember buying Afterburner, my first fig from this awesome team. I loved his futuritic motorcycle mode. MakeToys Quantron wasn’t cheap. And I’m ashamed to say that as of this writing I still have not had the chance to play with this at all. I barely opened the box a few weeks ago to inspect the contents. Life as a working adult is way too hectic, and all of you reading should rue the day when you don’t have the time to immediately enjoy a $400 toy. But I promise to get to Quantron soon. All reviews I have seen gave it high marks. I know I will not be disappointed.

I have repeatedly mention how cool Generations 30 Jetfire is elsewhere in this blog, so I won’t do it again. Just know that he is awesomeness manifested in physical form. Go out and get yours now.

Masterpiece scale Dinobots is something that many 3rd parties are jumping into lately. These figures are usually $200 each… not cheap by any means. They all look pretty nice. But if I’m to get one, I want to go with a 3rd party that I trust. And so comes Scoria by Fans Toys. I was thoroughly impressed with Quakewave, so I had to give their interpretation of Slag a shot. Scoria does not disappoint. In robot mode he’s big and beefy. Construction is solid, and the transformation to dino feels familiar and refreshing at the same time. Scoria looks awesome in dino mode. I wish I have some pics handy to show him off. Maybe I will in a separate blog post.

I got TF Prime Beast Wars Optimus Prime purely because he was on sale at BBTS. I saw the fig quite frequently on the racks at stores like Walmart and Target and have always wondered if he’s any good. He’s not. A required purchase this ain’t. I already wasted too much time writing about this figure.

Nemesis Prime and Cliffjumper are just repaints of Optimus Prime and Bumblebee, respectively. So I won’t talk about them too much. Skrapnel (or Shrapnel) is a cool little G1 Insecticon. This is probably the first time in a long time that Hasbro has made a G1 looking Insecticon. Tailgate is using a mold that will be repainted into Windcharger. This mold is ok. I got this to have a distinct mold for Tailgate, because I think the Reveal the Shield Windcharger is a much better mold and that will be my Windcharger.

The remaining deluxe Generations Thrilling 30 figures I’ll just quickly mention. Goldfire, Nightbeat, Dreadwing, and Jhiaxus are repaints of a figure in the same lineup. I really like Jhiaxus though. I’m liking the color scheme, and Hasbro reworked the mold to be different enough that it feels like a distinct figure. Windblade is a brand new mold. She looks pretty cool in both modes, but the figure itself is kinda flimsy. Waspinator is very cool! This is probably the coolest Waspinator that Hasbro has ever made. I like the wing gimmick. Skids and Crosscut are repaints of each other, though this mold is the first time we’re getting them. I was really looking forward to Skids, since many reviews praised the figure. The car mode is nice, but the robot mode has some poseability issues. There’s so much going on in robot mode that all the features start to block on itself. Still, all the weapons on Skids (and Crosscut) does make for a nice looking figure, when you can get them to pose the way you want.

Ok… that was a lot of figs! 27 total by my count. 23 if you don’t count the Mini-Cons of the Generations Thrilling 30 legends figs. My previous record for single TFs in a month is 24, so this month does surpass that if Mini-Cons are included as separate figures. However there’s one thing that this month sets a record for… and that’s the amount spent! Adding all these up, the total TF spending this month comes to a whopping $885.90! Ouch. That’s a bit much by anyone’s standard. Quantron and Scoria accounts for $600 by themselves alone. I really need to start selling off whatever I don’t play with anymore. Time to list more stuff in my Sales Section.

October is the last month of extravagant TF spending for 2014. Things will die down for the rest of the year.

Oh, one more thing, at the end of Oct 2014 I took another pic of my orange TFs. Check it out.

More to come… Transform and Roll Out!

I’m finally back to cataloging my purchases for each month. This activity has been on hiatus for some time, and I’m way behind. June 2014 was a busy month in terms of TFs purchased, partially because of BotCon 2014 that took place this month. The convention was in Pasadena, California, and I always go if the event is at this location. I may make a separate post for my BotCon 2014 pics. But that’s getting off topic. Time to showcase the figures for this month. This is a long list. Prepare yourselves.

• Generations Thrilling 30 Swerve and Flanker, Target, $9.49

• Age of Extinction Drift, Walmart, $9.97

• Age of Extinction Hound, Toys R Us, $24.99

• Age of Extinction Slash, Toys R Us, $7.49

• Age of Extinction Strafe, Walmart, $9.97

• Transformers Prime Beast Hunters Bulkhead and Prowl, Walmart, $12

• Transformers Prime Dark Energon Wheeljack, BBTS (at BotCon), $15

• BotCon Exclusive Depth Charge and Rampage, Hasbro (at BotCon), $62.71

• MakeToys Mobine MB01-SP2 Missile Launcher Marine Type, CapturedPrey.com, $48

• Mastermind Creations Hexatron, CapturedPrey.com, $130

• MakeToys Mobine Paladin/Chaos, CapturedPrey.com, $79

• Renderform Gold Scout Upgrade Kit, CapturedPrey.com, $25

There are a lot of TFs here. 12 purchases in all, for a total of 13 figures and 2 upgrade kits.

Generations Swerve and Flanker were the first finds of the month. These are cool little figs. I don’t care much about the Mini-Con (Flanker), but Swerve is a real prize. He’s fun to play with. I like both his robot mode and alt mode. There’s a redeco of this fig out there as Gears, though as of this writing he’s kinda hard to find. I plan to get one.

Next up are all the Age of Extinction figs. As a whole, I think the AoE figs are rather disappointing. The Dinobots pictured here (Slash and Strafe) certainly attest to that assertion. I’m not particularly impressed with either of these and I’m looking to sell them. However, Drift and Hound are quality figures. Drift is probably my favorite of the deluxe figs from AoE. Hound is a solid voyager figure with weapons to spare. I have kind of reviewed them back in this post, so I won’t do it again. Just know that Drift and Hound are both solid additions to your AoE line.

All remaining figures featured in this post are either bought or picked up at BotCon. First up are TF Prime Beast Hunters Bulkhead and Prowl. Gemini bought these for me a few months before BotCon, but I did not have a chance to meet up with him til this event. He found this pair at his Walmart for $12 on clearance. I was really only interested in Prowl as I already have Bulkhead. At the time, Prowl was really hard to find (and he is still kinda is as of this writing). So I did not mind spending $12 for both figs.

At the BBTS booth I picked up Dark Energon Wheeljack. This is a BBTS exclusive. I could have gotten this from their website (for cheaper), but at the time I had nothing else I needed to buy from BBTS and I was already there so I went for it. Normally I don’t like buying repaints for the same character, but I really like this Wheeljack mold, and I love the transparent blue, so I splurged.

At every BotCon, Hasbro will sell some of their exclusive figs at their booth where they handle registration for Transformers Collector’s Club. This year was no exception. I mentioned back in the BotCon 2011 post that this was how I got the very rare Reveal the Shield Windcharger. In 2014, one of their exclusive figs caught my eye… Depth Charge! From Beast Wars, Depth Charge is one of my favorite characters. He’s a good guy, but at the same time a total bad-ass! Plus I love this mold. Terradive, the original character of this mold, is probably my favorite deluxe figure from Revenge of the Fallen. They repainted this awesome mold once for Space Case (from Dark of the Moon). I guess one could argue if using this mold for Depth Charge is fitting, but I don’t care. Depth Charge was about $20 if you have a TFCC membership, but without one the figure was about $40. So I decided to get the TFCC membership (about $42), which also comes with an incentive figure of Rampage. Hasbro chose to repaint TF Prime deluxe Megatron for Rampage. So for about $62 total, I got the TFCC membership, and two figures. Depth Charge and Rampage are rivals and nemesis of each other in Beast Wars, so it’s awesome having the both of them. To this day I still have not opened these 2. But I already know the Depth Charge fig will be remarkable. I know nothing of the TF Prime deluxe Megatron fig, so it remains to be seen how I will like Rampage.

And now for the figures I got from CapturedPrey. I bought all these earlier, some of them as early as the beginning of 2013. However, they don’t ship anything until your entire order comes in, at least that’s how it was at the time. I don’t know if they have developed some kind of stacking mechanism since then, like TF Source. Anyway, I still had several items outstanding at the time of BotCon, but I really wanted the figures that had already arrived. So I emailed CP and told them I like to pick them up at the booth. They were very accommodating. I picked up the four 3rd party items pictured above.

The Mobine Marine Missile Launcher kit by MakeToys is pure awesomeness! These kits really improve upon the crap that are PCCs. I featured this kit a little in this post. I tried this kit with Heavytread, Steelshot, and Undertow. Out of these 3, Heavytread looks the best, but it’s not bad with the other 2. My only regret is I should have also got the Jungle version. Apparently there were a shortage of the Jungle version, and most of the stock went to BBTS. MakeToys Mobine Paladin/Chaos is a similar toy, but with another smaller figure added in that will combine with the armor. This figure is a tribute to The Fallen (from the comics, not Revenge of the Fallen). The armor portion is more or less the same as the Mobine kits, but having a smaller figure combine with the armor to form The Fallen is an excellent idea. A pic of this figure appears here. This is way better than the piece of crap that Galoob tried to do with The Fallen that was featured in the Titanium line. I highly recommend the Mobine line from MakeToys.

Mastermind Creations Hexatron! What can I say about this piece that hasn’t already been said by others?! In case you can’t already tell, Hexatron is a modern interpretation of Sixshot by MMC. Way back in this post, when I first started this blog, I said I would love it if someone made a modern Sixshot. Well, to this day Hasbro still has not made this a reality, so MMC stepped up to the plate! What they delivered here is nothing short of spectacular. Hexatron is transformation engineering genius brought to life. I still have not transformed this figure to all its modes (I only did the robot mode and tank mode so far), but I have seen enough reviews of the other modes to know that all 6 modes are great. Construction of the figure is extremely solid. MMC cares about it’s products and it shows. And at only $130, this is actually not a bad value for 3rd party products of this size. Speaking of size, Hexatron is probably a better fit for the MP-verse than the CHUG-verse, but I’ll take it anyway I can. Of all the figs featured in this post, if you can only get one, this is it. In fact, if you wanted to nominate figs for Figure of the Year and 3rd party products can be included, then Hexatron would without a doublt be nominated. Many may even argue he would win.

That only leaves the Gold Scout Upgrade Kit, which I have yet to open. This set upgrades Classics Bumblebee to Goldbug. I’ll check this out when I have some time.

Whew… that was a lot. So much so that I didn’t even open them all yet as of this writing, like I mentioned above. But having a deluge of TFs is better than being in a drought. And BotCon 2014 was pretty special. I may report on it in a separate post. Til then… Transform and Roll Out!

Happy New Year! I usually do these new year’s posts right around the turn of the year, either on New Years Eve or New Years Day. But of course life gets in the way, and so here is the annual New Years post delayed til the end of January. Better late than never I always say.

I’m conflicted as to how I feel about 2014. For starters, we had another TF movie. Age of Extinction was quite the paradox in movie history. It was the highest grossing film worldwide for 2014, yet that the same time Rotten Tomatoes report a lowly rating of only 18%. And compared to previous movies, I would say that the AoE toys as a whole are rather disappointing. I think Hasbro recognized that most mainstream fans may be sick of another Michael Bay full-length feature, and in response did not make as many toys. Personally I don’t think I can take anymore “Bayhems”. I sincerely wish another director would take over the franchise. Asking for popular and proven sci-fi action directors, such as J.J.Abrams, Joss Whedon, or Christopher Nolan, is probably out of the question. And the movie studio would not want someone who would take a dramatic departure from what Bay has laid out. Though a little outdated, this article suggests 6 directors who could potentially take over the TF movie franchise. I would add Justin Lin (of Fast and Furious fame) and Brad Bird (Mission Impossible 4) to this list.

2014 also saw a record number of 3rd party transforming robots offered. If you’re only into official Hasbro and Takara products, this wouldn’t matter to you. But if you’re reading this blog, chances are you are at least familiar with what I’m talking about. Just a few years back, all you had to know as far as the 3rd party scene was FansProject and TFC Toys. Those days are long gone. There are probably about 50 3rd parties out there, all doing its own thing and wanting a piece of your hard-earned TF dollars. And there appears to be no slow down. I sometimes fear that the market for 3rd party products are near saturation. Let’s face it: this is a niche market. Third party figs are expensive. Having so many companies vying for a piece of the pie… I don’t know how sustainable this is.

OK, now let’s look at some statistics for 2014. Here is the break down:

• 21 figures from Age of Extinction
• 8 figures from Transformers Prime
• 4 Masterpiece figs
• 1 figure from Fall of Cybertron
• 32 figures from Generations Thrilling 30
• 2 TFCC or convention exclusive figures
• 25 Third Party products

That’s a grand total of 93 figures for the year. It comes to 7.75 figures a month. Just slightly more than 2013. Notice there are 25 3rd party products! 25! That’s gotta be a record for me. I wonder if this trend will continue in 2015.

I’ll end this post with a few collection pics of some of my favorites from 2014.

Age of Extinction Grimlock, Slash, Slug, Strafe, and Scorn.

Maketoys Paladin Chaos (tribute to The Fallen)

Masterpiece Streak. Released in 2013, but actively played with in 2014. Shown here holding his standard rifle and a pistol from a Gears of War figure that I no longer have.

Age of Extinction Drift and Hound

Masterpiece Wheeljack and Bumblebee

Generations Brainstorm and Jetfire

Mastermind Creations Feral Rex (Predaking), looking awesome combined!

Happy 2015! Transform and Roll Out!

Finally! Seibertron is posting pics of G1 Technobots. Go here to check it out. They are my favorite Autobot combiner group from G1. I can hear what you’re saying now: “You crazy? What about the Aerialbots?!” Yes they are probably the obvious choice for most, but I’m partial to toys that I own. In G1 I completed my Technobot collection. So there.

Check out my pics below. They are nowhere near the quality of Seibertron pics. But it’s proof I own them. I know the pics don’t show it, but I do have all their accessories. Next to my Combaticons, the Technobots are the pride and joy of my G1 combiner collection. And unlike my Combaticons, these guys are still in pretty good shape.

Clockwise from top left: Scattershot, Nosecone, Strafe, Afterburner, Lightspeed

Computron

Rumor has it that a third party (ex: FansProject, MakeToys, TFC Toys) is currently making plans to do a Technobot homage team, much like Hercules or Giant. I can’t wait! If it turns out anything like the current 3rd party combiners, I will be buying.

Technobots… Transform and Roll Out!