Archive

Posts Tagged ‘Transformers Prime’

Happy St Patrick’s Day 2024! Keen in Green Transformers!

March 17th, 2024 Comments off

After a 18+ month blogging hiatus, I am back! My last real entry in this blog was this one, dated around August of 2022. I didn’t think I would be away for this long. I am still very actively collecting TFs. But other responsibilities in life, both personal and professional, has kept me away from TFMatrix. But no more! I am picking up right where I left off, and I will continue to share what I’ve been doing as a TransFan with renewed vigor!

In a well-honored tradition of TFMatrix, I like to do special posts about my green Transformers on St Patrick’s Day. And I always feature green TFs that I have never featured before. So without further ado, for 2024, feast your optics on these green figures!

Green TFs 2024

Quick bits about each figure:

  • Masterpiece Hoist – This is the most expensive figure in this group. Hoist needs no introduction, and HasTak finally got around to re-molding MP Trailbreaker into MP Hoist. This figure is solid, and he looks good in both robot and alt modes. There is one part with the shoulder transformation that’s a bit scary, like it could easily be broken. But overall, Hoist is well-engineered and a lot of fun. I had Artifex, a 3P MP-style Hoist by MMC (Mastermind Creations). Artifex is horrible, and I sold it years ago (for a profit no less). MP Hoist is the one you need in your collection.
  • Legacy Evolution Armada Megatron – This is the largest figure in this group (if you count his shoulder protrusions). And he’s the easiest one to transform. Armada Megatron in the Legacy Evolution line is a figure you can easily pick up and play, which is not a bad thing in my book. This is a solid figure with a straightforward transformation. I don’t know much about Armada, as that came around during my TF Hiatus. The only other Armada Megatron I own was released back in Combiner Wars. I don’t recall that figure too well, but I should dig it out one of these days and compare it to the Legacy Evolution version.
  • Legacy Road Hauler – Road Hauler is a repaint of War for Cybertron Earthrise Grapple. So if you are familiar with that figure, you already know what you’re getting with Road Hauler. A few notable points make Road Hauler worthy of inclusion in your collection. First, I love this lime green. It really pops on this figure, and reminds me of the color of Constructicons. Second, I love that face! He seriously looks like he’s screaming for dear life, as if he’s aboard that doomed shuttle with Ironhide and Prowl in the 86 movie. And finally, Road Hauler may be a tribute to Hauler, a yellow crane vehicle we see in the very first ep of G1 Transformers. When Hound was shot by Laserbeak and fell into a ravine, we see some Autobots come to his rescue later. Cliffjumper looks up to a crane and says, “Hauler, pull him up!” Fans have theorized who exactly is Hauler over the years. Some suggest that Hauler is really Grapple, some thinks Hauler is some kind of drone, while others claim it’s another Autobot. If you subscribe to that last theory, then Road Hauler may be the figure you have long wanted.
  • Legacy Cosmos – Legacy Cosmos is perhaps the most sought-after figure in this group. He was released as a Walmart exclusive, in a limited sub-line under Legacy called Velocitron Speedia 500 Collection. Cosmos was the most recognizable G1 character in the collection, and the only figure who had a new mold (the rest were repaints, Road Hauler being one of them). So needless to say, fans and scalpers snatched him up quick. I never saw Cosmos in store. Luckily, my friend Gemini was able to track one down for me at the Walmart near him. Legacy Cosmos is a terrific figure. He has a fun transformation, and both modes look toon accurate. Engineering and tolerances are above par. Scales nicely with other CHUG figures. Legacy Cosmos is going anywhere from $70 to $150 these days. If you missed out, don’t despair. A re-release of Cosmos with some minor paint app differences is coming soon. Wait for that figure instead.
  • Legacy Prime Bulkhead – The last figure in this group is Bulkhead from TF Prime, released in the Legacy line. As a figure, Legacy Bulkhead is not bad. He is well-built and both modes look good. The overall transformation scheme is tried and true, but there are bits in the implementation that’s both refreshing and unusual. I will admit that there’s always something about this transformation that stumps me if I haven’t handled the figure in a while. Also, I don’t find this Bulkhead to be too screen accurate. He had a very different alt mode in the show, and in robot mode he looks way too blocky. Still, the figure is solid. Not a must-have by any means, though.

Links to previous St Patrick’s Day posts.

I can’t talk about St Patrick’s Day without mentioning March Madness. My school, UCLA, has a very dim chance of being selected to the field of 64. But even if they don’t, I’m still gonna try to watch as many games as I can.

Happy St Patrick’s Day everyone! Transform and Roll Out!

 

Categories: Pics

Decepticon Air Superiority, 2021 !

May 17th, 2021 Comments off

I haven’t posted anything in so long. This blog seriously needs some love, so I’m doing one today. And once again, a bunch of random Decepticon jets are lying about here and there. Which means it’s time for another Decepticon Air Superiority post!

Prior such posts in years past:
2012
2017

Here are the jets to give the Autobots nightmares in 2021.

All 5 jets come from different TF toylines. In order of release:

  • Dreadwing is from Transformers Prime Beast Hunters
  • Armada Starscream is from Generations Thrilling 30
  • Snapdragon is from War From Cybertron: Earthrise
  • Cyclonus is from War From Cybertron: Kingdom
  • Scourge is from Studio Series 86

In terms of continuity, Cyclonus and Scourge are obviously related in G1, with Snapdragon appearing with them a season later in the US continuity. Armada Starscream and Dreadwing are on their own.

As for the toys, Armada Starscream and Dreadwing are fairly outdated by today’s standards. These are still good mass-retail deluxe figs to pick up and play with. They present no challenge transformation-wise, and both figs look decent in both modes.

In my last post I reviewed Kingzilla, a 3rd party MP homage to Snapdraon. Here we have the official CHUG version of the same character released in the WFC Earthrise line. And just like Kingzilla, I like WFC Earthrise Snapdragon quite a bit. This is a fun figure, easy to transform between the 3 modes. Not only that, all 3 modes look fantastic. This is not an easy feat by any means for a Triple Changer. Of course the Headmaster gimmick is still in place. Krunk functions as the head for both robot and dragon, and he can sit in the cockpit in jet mode. G1 purists may whine over the minor alteration in transformation scheme, in that the jet nosecone become part of the legs instead of being on the robot’s back. Personally I don’t see it as a big deal.

The 2 newest figure here are Cyclonus and Scourge. I acquired them both in 2021. It’s unclear to me why the 2 figs are released in separate toylines. Cyclonus could have easily been released as part of Studio Series 86 as well. Perhaps he has an appearance in Kingdom, the upcoming final chapter of War For Cybertron.

WFC Kingdom Cyclonus is hands down the best Cyclonus that has ever been made. This one easily tops my other Cyclonus figures, such as the one from Generations or Combiner Wars. WFC Cyclonus looks great in both modes. The jet mode is nice and sleek, while the robot mode is proportionate and toon-accurate. Transformation is pure joy. For a mass produced toy, the transformation difficulty is above average yet very satisfying. There are enough steps to fully qualify this piece as geared towards collectors, but at the same time the whole process is intuitive and ingenious. The jet nosecone transformation deserves special mention. The entire unit folds and compacts into itself that it’s the perfect way for Cyclonus to go from alt to robot. Construction of the figure is superb as well. Cyclonus gets the highest recommendation from me.

Studio Series 86 Scourge is a terrific addition as well. I don’t think he’s as good as Cyclonus, but this is also without a doubt the best Scourge figure made to date. Both modes look good. The robot mode is toon-accurate, while the alt mode replicates that boat-looking space craft that he’s supposed to be. The transformation is tweaked a bit from G1 so that SS86 Scourge is not as much a shell-former. It does take some work to align all panels of the alt mode, but it can be done with just a bit of effort. In alt mode, SS86 Scourge can be configured with his head exposed above the space craft, something we often he him do in the G1 cartoons and Movie. Hardcore G1-ers will probably multiples of this figure to create a Sweep army. This makes even more sense if some 3P will create a head for the Sweeps (basically Scourge minus the mustache).

So who’s leading this bunch? Other than Snapdragon, all the others have a claim to Decepticon leadership. Though individually, Snapdragon may be the most powerful.

Transform and Roll Out.
 

Categories: Pics

Broken Toys! 10 of My Damaged Transformers

February 1st, 2018 1 comment

I have a lot of Transformers. I do play with them, and I try to be as careful as I can be when transforming them. But when you have as many as I do, you’re bound to break some. Occasionally the figures come broken (yes this has happened). Sometimes an inherent flaw in manufacturing or design lends the figure to breaking after only a few play.

Below are 10 of the figures from my collection where something has occurred to render them less than perfect. My heart breaks every time one of my Transformers breaks. Read on and see if you have mishandled any of these 10.
 

Brawl (Leader Class)
Series: Movie (2007)
Allegiance: Decepticon
Function: Ground Assault
Mode in Package: Robot
Known Redecos: Movie Deep Desert Brawl
Status: Returned to store; got replacement

The Figure:
Movie Leader Class Brawl is one of only few Leader Class figures I have from the entire Movie-verse. I highly recommend him. The robot mode is decent, but the tank mode is where this figure truly shines. He also has working lights and sounds, if that’s your thing.

The Incident:
First time I purchased this figure was from Toys R Us, and he was already broken out of the box. I documented this already, back in this post. There was a peg that came broken. It’s been more than 10 years now, so I don’t remember exactly which peg. But I think it was on the turret.

The Aftermath: I quickly returned Brawl to Toys R Us. I would have simply asked for a exchange, if they only had more of the figure. Since they didn’t, I asked for a refund and then bought it again on Amazon. And for cheaper too – looking up my old Amazon records, I re-purchased him for only $31.99! Can’t imagine getting a Leader Class figure for that price nowadays.
 

Samurai Prowl (Deluxe Class)
Series: Animated
Allegiance: Autobot
Function: Autobot Spy
Mode in Package: Motorcycle with Sidecar
Known Redecos: none
Status: Returned to store; no replacement

The Figure:
Samurai Prowl is one of the hardest figures to find from the Animated line. I was super thrilled when I found one on pure happenstance. He appeared on a TRU shelf when the TFA line of toys was officially over. I documented that purchase here and a review here.

The Incident:
I outlined how I damaged the toy in the review. Specifically, the connection between the motorcycle and the side car is broken. The whole thing happened in such a way that I didn’t even notice it when the breakage occurred. I have must broken it on the first transform from alt mode to robot mode, because I saw the breakage on the reverse transformation. I’m forced to think that connection must have been super brittle. However I haven’t seen any other documented cases of this, so it’s possible I was being too rough. Though that’s not like me at all – when it comes to my TFs I’m usually careful to a fault.

The Aftermath:
I wasn’t happy about the breakage at the time, and I don’t feel any better about it now. I returned the figure to TRU, because perhaps the TF OCD in me can’t stand to have broken figures in my collection. But like I said, this figure is hard to find. I only saw him one other time. It was at the dealer’s room at a BotCon. The dealer wanted $40 for it, and no way was I gonna pay that. Sad to say, I never saw the figure in store again. Checking on Amazon just now, the lowest price is around $100. In retrospect, maybe I should have just hung on to my broken Samurai Prowl, or spent the $40 at BotCon for another one.
 

Bumblebee (Deluxe Class)
Series: Animated
Allegiance: Autobot
Function: Autobot Speedster
Mode in Package: Car
Known Redecos: Elite Guard Bumblebee, Jetpack Bumblebee
Status: Damaged; got replacement

The Figure:
From one TFA figure we go to another. I got TFA Deluxe Bumblebee in a pack of 15 figures I bought used on Cragislist, something that I documented here. TFA figures as a whole don’t have the best construction. They often feel like cheap plastic cobbled together into a toy by ill-fitting ball joints. Bumblebee is a prime example of this. The alt mode cockpit pieces that form the back of the legs are connected by ball joints. One of them is too loose, and keeps coming off.

The Incident:
I tried to fix said loose joint by applying some nail polish to the socket. Unfortunately, I applied too much and now the ball won’t go in at all. So I guess you could say I broke this by trying to fix it.

The Aftermath:
I tried to buy another Bumblebee in store, but by then the Animated line was officially over. Online retailers were all charging a markup. Bumblebee is a mediocre figure at best, so I’m not paying markup for such a figure. Fortunately for me, I was able to get a Japanese version of this figure at a pretty good price, way less than whatever the MSRP was. That purchase was outlined here. The Japanese version is better anyway, with shiny chrome paint and slightly better construction. This is the figure that represents my Bumblebee in my TFA line. As for the “broken” Bumblebee, I keep him around for spare parts. He has come in handy, which brings me to my next entry…
 

Megatron (Voyager Class)
Series: Transformers United
Allegiance: Decepticon
Function: Decepticon Leader
Mode in Package: Robot
Known Redecos: Classics Megatron, Henkei Megatron
Status: Repaired

The Figure:
I am still not sure what exactly is Transformers United. It was a Japanese only line. As far as I can tell, Takara took a bunch of Henkei figures, repainted them, and released this United line. There was no US equivalent. Anyways, Classics Megatron was one of the first 6 figures produced in the Classics line. The line is significant in that it started an update of classic G1 characters in modern forms while still capturing the G1 spirit. As a figure, the design of Classics Megatron is questionable. He does transform into a gun, which all G1-ers love. But Classics Megatron fits the very definition of shell-former (think G1 Scourge). Also, his alt mode kinda looks like a futuristic Cybertron pistol at best, and a toy water gun at worst. The Classics colors also don’t help matters, and even I have to agree that the US version of the figure used some kid friendly colors that made Megatron look like a Nerf toy gun. And so I wanted a more G1 accurate version of this figure. I was at BotCon 2011, and saw a dealer selling the United version of this figure at a reasonable price. So I bought it.

The Incident:
I’m not in the habit of opening my toys at the convention. After I got home, I find that something is wrong with the transformation. I can’t get the waist to properly align correctly for alt mode. Upon closer inspection, I see that a part in the waist is installed backwards! The whole thing is assembled with a screw, so all you really had to do is unscrew the assembly, re-position the part, and re-screw. However, it took me sometime to figure all this out. And by the time I did, I totally mangled the head of the screw. Fortunately I got the screw out, but there was no way it could be used again.

The Aftermath:
In the last entry I mentioned I use TFA Bumblebee for spare parts, and he has a screw that kinda fits into United Megatron. I now use that screw to secure this part of Megatron’s waist. The part in question is only visible during transformation. The fit with Bumblebee’s screw is not perfect. Rotation of the part using this screw is quite loose. However, the loose rotation is only apparent during transformation. And the waist as a whole has other parts that lock it into place in both alt and robot modes. So I’m ok with this fix. I have made peace with the fact that my United Megatron is not perfect, but functional (que “I still function” from the G1 Movie).
 

Darksteel (Deluxe Class)
Series: Dark of the Moon
Allegiance: Decepticon
Function: ???
Mode in Package: Sports Car
Known Redecos: DotM Sideswipe
Status: Damaged; got replacement

The Figure:
Dark of the Moon Darksteel is not a character in the movie. I’m not sure if he has an appearance anywhere. Darksteel is another quick cash grab off an existing mold, in this case Sideswipe from the same movie. In all honesty, this mold is pretty cool. The redeco colors chosen for Darksteel is smashingly striking, and he does have a unique head mold that differentiate him from Sideswipe. I bought one when the figure was first released. I transformed him from alt mode to robot mode no problem.

The Incident:
Some months later I decided to transform him back to alt mode. It was late a night and I guess I was a bit too careless. Long story short, I bent one of the feet pieces the wrong way and broke it. I have transformed Sideswipe many times so I thought I knew the process, but I will admit that I don’t remember how TFs transform as well as I used to.

The Aftermath:
Some months after the first breakage, I went to shop at Kohls because they mailed me a $10 certificate, good for anything in the store. Most people don’t know this, but Kohls also has a toy section. Occasionally they will have Transformers. Anyways, on this particular trip, I find that they had Darksteel. They were already having a 10% off sale. And with the $10 certificate, the final price of Darksteel came to only $3.90. I documented that purchase here. To this day, I still have this 2nd copy of Darksteel mint in the package. I’ll probably keep this unopened. He’s not worth so much now, but maybe one day.
 

Optimus Prime (Voyager Class)
Series: Transformers Prime Beast Hunters
Allegiance: Autobot
Function: Autobot Leader
Mode in Package: Robot
Known Redecos: Beast Hunters Optimus Prime (with extra green armor)
Status: Attempting repairs; got replacements

The Figure:
You didn’t think I was gonna get through this list without having an Optimus Prime figure on here, did you? Hasbro makes so many Optimus figures that it would be weird not to break one if you collected as many TFs as I did. I really like Beast Hunters Optimus. The toy is a good size to play with. He’s got a fun and intuitive transformation, and the figure looks good in both modes. I’m not crazy about the head mold, and hardcore TFP fans love to point out that his sword in the show is blue, not green. Still, at less than $20, this is a terrific OP figure.

The Incident:
I have only ever broken one Optimus Prime figure, and it’s this one. It could be worse, like if I broke the MP-10. But like I said, BH Optimus is one of the better figures of the famous Autobot Leader, so I’m still a bit bothered by it. Also, this figure represents something significant in my personal life, as I have documented here. So it kinda pains me to see it less than perfect. What happened is I broke the sword while Optimus is holding it, so now the handle of the sword is stuck in Prime’s right fist. I felt the sword being stuck in the fist, yet I still tried to force it out. Not a good move. Though I’m sure it was a bad job with the tolerance that led to this. My buddy Gemini had the same problem. Only he was more patient and submerged the fist and sword in really hot water and pulled it out.

The Aftermath:
To compensate for this breakage, I went out and purchased more BH Optimus figures, documented in the same post. I got both the US and Japanese versions of this, so now I have two unopened BH Optimus Prime figures sitting in a closet. I’m glad I did, because they are now worth quite a bit. I still want to attempt a fix on my original figure though. I recently bought the 3rd party Blue Skybreaker Sword by Dr Wu that is way better than the sword that came with BH Optimus. Now I just need to get the broken sword handle out of Optimus’ right fist. If I can do that, I will consider this figure back in perfect condition. Maybe I’ll try Gemini’s hot water trick.
 

Bumblebee (Deluxe Class, part of TRU Exclusive 2-pack)
Series: Age of Extinction
Allegiance: Autobot
Function: ???
Mode in Package: Robot
Known Redecos: AoE Bumblebee, standard edition
Status: Damaged; no replacement

The Figure:
How many Deluxe Bumblebees did they make from the Movie-verse? Too many to count, that’s for sure. I got one Deluxe Bumblebee in modern Camaro form from each of the 5 movies. The one featured here is from the 4th movie: Age of Extinction. After a while, all these Bumblebees just kinda blend together. The later Bees became one giant yellow blur. I don’t remember anything special about this one, other than the two circular disc type weapons that he has. For AoE, I got the special TRU 2-pack edition. The package comes with the standard AoE Deluxe Bumblebee that’s painted a bit more orange, and a repaint of Generations Legend Bumblebee from the Thrilling 30 line. One of these days I should put together all my Deluxe Movie Bumblebees for a group photo.

The Incident:
One night when I was transforming AoE Bumblebee from robot to car, I broke off the this right shoulder piece. This piece becomes the front right area of the hood in alt mode. I don’t even know what happened exactly. The part just broke on me. I dunno, I might have forced something, or maybe the part was just weak. Movie toys usually don’t have the best construction to begin with.

The Aftermath:
I thought about buying another standard Deluxe AoE Bumblebee to replace this broken one. But my feelings about this figure is mediocre at best. I didn’t wanna pay MSRP, though I was never able to find another one at less than that. So chances are this figure will just remain broken, not getting replaced or repaired.
 

Bumblebee (Deluxe Class, part of Bumblebee vs Barricade First Encounter 2-pack)
Series: Movie (2007)
Allegiance: Autobot
Function: ???
Mode in Package: Robot
Known Redecos: Movie (2007) Bumblebee standard edition, Target Exclusive Evolution of Bumblebee 2-pack
Status: Damaged; no replacement

The Figure:
How many Bumblebees are we gonna have on this list? And why do I keep breaking them? This is the last one, I promise. This is the very first Deluxe Bumblebee released in the Movie-verse. This figure transforms into a classic Camaro, the car that Sam first owns for the first half of the original Movie (and still the best). All the initial Movie toys had this crazy gimmick called “Advanced Automorph Technology”, sometimes just Automorph for short. Basically, several parts of the figure will auto transform upon moving a single piece. This is usually done through spring-loaded action built into the figure. In the case of this classic Caramo Bumblebee figure, the hood will automatically fold down to form the chest upon doing something else (of which I don’t recall anymore). It sounds cool, but it really isn’t.

The Incident:
The problem with these kinds of physical gimmicks is that they’re prone to breakage, and that’s exactly what happened. Years after I owned this figure, I dug him out of a box in the closet. I usually keep my figures in alt mode. When I found him, I saw that the car’s front hood is folded down. I tried to fold it back up, but it won’t click into position anymore. This figure broke while it was in storage. Some plastic pieces broke off after years of holding Automorph spring pressure. I probably should have stored this guy in robot mode. Lesson learned.

The Aftermath:
I actually had another version of this figure as part of the Target Exclusive Evolution of Bumblebee 2-pack. I kept it new but then sold it later, before I found out about the breakage. I do kind of want another one of this Bumblebee, not because it’s a great figure, but for it’s significance as part of a toyline that crossed from animation into live action media. Not a priority though.
 

M-F-B
Series: N/A
Allegiance: Autobot
Function: N/A
Mode in Package: N/A
Known Redecos: None
Status: Damaged; no replacement

The Figure:
This isn’t technically a figure. This is a gun accessory called M-F-B by 3rd party MakeToys. Due to licensing reasons, they can’t call it what it is, which is My First Blaster. In the IDW line of TF comics, this is a weapon for smaller sized Autobots. Swerve is often seen holding the weapon. MakeToys made this accessory to go with their Swerve figure (called Trash-Talk).

The Incident:
I got this accessory in the hopes that it would fit the Generations Thrilling 30 version of Swerve. Turns out, it doesn’t. The handle for M-F-B is 3mm, while Swerve’s hands are for 5mm weapons. Also, I didn’t know this came as a model kit (or maybe I did, but then forgot). I’m terrible at building models. During assembly, I broke off one of the light green bulbs that go on top of the M-F-B. Total bummer.

The Aftermath:
The breakage is beyond repair. And since this actually doesn’t even fit Generations Swerve, and I don’t have Trash-Talk, there’s no point for me to hunt down another one. This M-F-B will stay broken.
 

Soar (Blue)
Series: N/A
Allegiance: Autobot
Function: Bombadier
Mode in Package: Robot
Known Redecos: Soar (Red), Soar (Red comic), Soar (Blue comic)
Status: Repaired

The Figure:
Soar by Fans Toys is an awesome homage to G1 Swoop. I have written about this figure already, so read all the details here. If you are collecting Masterpiece style figures and you need to round out your Dinobot collection, you need this figure.

The Incident:
Nothing was technically broken on my Soar. However, when I got the figure, it was missing the large vertical piece of the display stand that Soar sits on in dino mode. I couldn’t believe it! This is the largest piece in the package next to Soar itself. I love Fans Toys, but where was the QC on this?!

The Aftermath:
Capturedprey.com was gracious enough to hunt down a replacement piece of the stand for me. It took several months, but better late than never. I now have a fully completed Soar figure in perfect condition with all accessories intact. Thank you Capturedprey!
 

I do have more figures that are broken/damaged/missing parts, but these 10 will do for now. I’ll make another post when I have another 10. Hopefully that won’t occur. Though with the amount of Transformers I have, it’s only a matter of time.

What figures have you broken? Or come damaged or missing parts? Feel free to comment below.

Transform and Roll Out.
 

Categories: Top Ten

Transformers Purchased in December 2014

December 29th, 2015 Comments off

Happy Holidays! Today I am documenting all the TFs acquired back in Dec of 2014. I fully realize that’s one whole year ago. I know… I’m getting behind on my blogging. It’s just so hard to find the time. I am beginning to think I should make more frequent blog writing my new years resolution. But that’s a story for another day. Here are the TFs for the last month of 2014.

  • Transformers Prime Beast Hunters Prowl, Walgreens, $7.74

  • MakeToys M-F-B, BBTS.com, $12.99
  • DX9 004 Armor Set, BBTS.com, $44.99

  • Generations Thrilling 30 Brainstorm, BBTS.com, $26.99

TF Prime Beast Hunters Prowl is a repeat purchase. I got one back in June of 2014. The one this month was a random find at Walgreens. He’s rare, he was only $7.74, so I figured why not. I kept him unopened all this time. Maybe he will be worth something someday.

The DX9 004 Armor is for Age of Extinction Evasion Mode Optimus Prime. That figure is one of the first figs I got from the AoE line, and one of the best from that line. When I heard of a armor upgrade that would make him more like Powermaster Optimue Prime from the fifth toy season of G1, I was immediately intrigued. I never heard of DX9 at the time, but I looked at enough pics online to take a chance on this set. I am happy I bought the set. With the armor attached, the figure feels way more G1 like. I especially like the head mold. There are some tolerance issues though. The feet pieces are way too tight. You will need to either sand down the pegs on the feet pieces, or make the feet holes bigger on the figure. I only tried this upgrade set in robot mode. These same pieces also can attach in alt mode, but I didn’t try it.

The MFB from MakeToys is acronym for My First Blaster. I am told this weapon for Swerve makes an appearance in the comics by IDW. I won’t comment anymore as I’m no authority on the IDW-verse of TFs. The weapon itself is pretty cool. Be aware it does require some assembling. I’m a terrible model builder, so I already broke off one piece when assembling this. Also, this weapon is designed to go with MakeToys Trash-Talk, or their version of Swerve. This weapon will not operate with the official Hasbro Generations 30 version of Swerve (coincidentally also purchased in June of 2014). I bought it thinking that it would. The pegs are not the same size. Should have done my research first.

Last but not least, there is Generations Thrilling 30 Brainstorm. I first saw this at BotCon 2014. I could not believe my eyes when I saw this. I mean… if Hasbro was gonna venture into Headmasters, that opens up a whole world of possibilities on what they are willing to re-make in this modern era. I’m salivating just thinking about it! Anyways, Brainstorm is an excellent figure. He’s fairly simple in transformation, but in my opinion that’s a good thing. Modern TFs are so darn complicated sometimes that I just want something I can pick up and play. Brainstorm fits that bill. If I have the figure handy, I can sit there and transform him back and forth repeatedly, like I did all my TFs when I was a kid. Both modes look nice. As a voyager figure, he’s bigger than some of the third party Brainstorms that have been produced (such as Smart Robin). Oh, by the way, there are two versions of this figure. I got the fixed version, code 42791. Click here for more detail.

OK, that does it for the figs in 2014. Now I can move onto 2015… in 2016. I know… I suck. But I will get this done and get up to date like I used to be. Transform and Roll Out!

Categories: On The Hunt, Pics

Transformers Purchased in October 2014

July 25th, 2015 Comments off

October always seem to be a busy month in terms of TF activity. In October of 2012, I set a personal record for most TFs purchases in a month. This month I may have set another new record, of a related but slightly different category. So sit back, relax, and enjoy. This will be a long post.

  • Age of Extinction Drift, Toys R Us, $24.99

  • Age of Extinction Optimus Prime Evolution 2-Pack, Toys R Us, $44.99

  • MakeToys Quantron, tfsource.com, $399.99

  • Generations Thrilling 30 Jetfire, bbts.com, $46.99

  • Fans Toys Scoria, bbts.com, $199.99

  • Transformers Prime Beast Hunters Cyberverse Optimus Prime, bbts.com, $4.99

  • Skrapnel with Reflector and Tailgate with Groundbuster, bbts.com, $21.99

  • Nemesis Prime with Spinister and Cliffjumper with Suppressor, bbts.com, $21.99

  • Generations Thrilling 30 Waspinator, Skids, Goldfire, Dreadwing, bbts.com, $59.99

  • Generations Thrilling 30 Crosscut, Nightbeat, Windblade, Jhiaxus, bbts.com, $59.99

Age of Extinction Voyager Drift is a repaint of Skyhammer from Dark of the Moon. It appears they keep using this mold for Movie-verse figs. Skyhammer is one of my favorite figs from DotM, so I had to have this Drift. The figure is exactly the same, other than the head mold, the blue paint scheme, and the swords. Drift’s swords are kinda cool. He can use them separately in each hand, or have them combine into one huge sword.

I bought the Optimue Prime Evolution 2-Pack purely for the repaint of the Classic Prime mold. I love that figure, and this shiny new paint had my attention. The other Prime figure here is a repaint of Evasion Mode Optimus Prime from Age of Extinction. In retrospect, Evasion Mode Prime is one of the only few good figures from TF4, so I’m glad I have this repaint. I did not open this 2-Pack. The collector in me will probably just hold on to this as mint.

When I first head of MakeToys Quantron, I already made up in my mind that I had to have it. Quantron is an homage to the Technobots of G1, my favorite Autobot combiner team to come out of that era. Sure the Aerialbots are the most famous, but I think the Technobots are the coolest. I still remember buying Afterburner, my first fig from this awesome team. I loved his futuritic motorcycle mode. MakeToys Quantron wasn’t cheap. And I’m ashamed to say that as of this writing I still have not had the chance to play with this at all. I barely opened the box a few weeks ago to inspect the contents. Life as a working adult is way too hectic, and all of you reading should rue the day when you don’t have the time to immediately enjoy a $400 toy. But I promise to get to Quantron soon. All reviews I have seen gave it high marks. I know I will not be disappointed.

I have repeatedly mention how cool Generations 30 Jetfire is elsewhere in this blog, so I won’t do it again. Just know that he is awesomeness manifested in physical form. Go out and get yours now.

Masterpiece scale Dinobots is something that many 3rd parties are jumping into lately. These figures are usually $200 each… not cheap by any means. They all look pretty nice. But if I’m to get one, I want to go with a 3rd party that I trust. And so comes Scoria by Fans Toys. I was thoroughly impressed with Quakewave, so I had to give their interpretation of Slag a shot. Scoria does not disappoint. In robot mode he’s big and beefy. Construction is solid, and the transformation to dino feels familiar and refreshing at the same time. Scoria looks awesome in dino mode. I wish I have some pics handy to show him off. Maybe I will in a separate blog post.

I got TF Prime Beast Wars Optimus Prime purely because he was on sale at BBTS. I saw the fig quite frequently on the racks at stores like Walmart and Target and have always wondered if he’s any good. He’s not. A required purchase this ain’t. I already wasted too much time writing about this figure.

Nemesis Prime and Cliffjumper are just repaints of Optimus Prime and Bumblebee, respectively. So I won’t talk about them too much. Skrapnel (or Shrapnel) is a cool little G1 Insecticon. This is probably the first time in a long time that Hasbro has made a G1 looking Insecticon. Tailgate is using a mold that will be repainted into Windcharger. This mold is ok. I got this to have a distinct mold for Tailgate, because I think the Reveal the Shield Windcharger is a much better mold and that will be my Windcharger.

The remaining deluxe Generations Thrilling 30 figures I’ll just quickly mention. Goldfire, Nightbeat, Dreadwing, and Jhiaxus are repaints of a figure in the same lineup. I really like Jhiaxus though. I’m liking the color scheme, and Hasbro reworked the mold to be different enough that it feels like a distinct figure. Windblade is a brand new mold. She looks pretty cool in both modes, but the figure itself is kinda flimsy. Waspinator is very cool! This is probably the coolest Waspinator that Hasbro has ever made. I like the wing gimmick. Skids and Crosscut are repaints of each other, though this mold is the first time we’re getting them. I was really looking forward to Skids, since many reviews praised the figure. The car mode is nice, but the robot mode has some poseability issues. There’s so much going on in robot mode that all the features start to block on itself. Still, all the weapons on Skids (and Crosscut) does make for a nice looking figure, when you can get them to pose the way you want.

Ok… that was a lot of figs! 27 total by my count. 23 if you don’t count the Mini-Cons of the Generations Thrilling 30 legends figs. My previous record for single TFs in a month is 24, so this month does surpass that if Mini-Cons are included as separate figures. However there’s one thing that this month sets a record for… and that’s the amount spent! Adding all these up, the total TF spending this month comes to a whopping $885.90! Ouch. That’s a bit much by anyone’s standard. Quantron and Scoria accounts for $600 by themselves alone. I really need to start selling off whatever I don’t play with anymore. Time to list more stuff in my Sales Section.

October is the last month of extravagant TF spending for 2014. Things will die down for the rest of the year.

Oh, one more thing, at the end of Oct 2014 I took another pic of my orange TFs. Check it out.

More to come… Transform and Roll Out!

Categories: On The Hunt, Pics

Transformers Purchased in August 2014

May 16th, 2015 Comments off

August is typically not a good month for finding new Transformers. In both 2012 and 2013, this month proved to be unproductive for TF hunting. Not so for 2014. Feast your optic sensors on all the goodies acquired August 2014.

  • Generations Thrilling 30 Roadbuster, Target, $22.99

  • Generations Thrilling 30 Sky Byte, Target, $22.99

  • Generations Thrilling 30 Tankor, Toys R Us, $14.99

  • Mastermind Creations Talon, CapturedPrey.com, $71

  • Transformers Prime Beast Hunters Optimus Prime (Japanese release), amazon.com, $38

  • Transformers Prime Beast Hunters Optimus Prime, ebay.com, $21.95

  • Age of Extinction Lockdown, Toys R Us, $16.24

  • Age of Extinction Bumblebee 2-pack, Toys R Us, $16.25

  • Masterpiece Sunstorm, Toys R Us, $76.48

Let’s go over some stats first. 9 purchases for 10 figures total. 3 online purchases and 6 in-store purchases. 3 Generations figs, 3 AoE figs, 2 TF Prime figs, 1 MP fig, and 1 third party fig. 5 are Autobots, and 5 are bad guys from various factions (Decepticons, Predacons, Independents). Pretty good distribution overall.

The Generations Thrilling 30 figures were a pleasant find. In the previous months, there weren’t any TFs on store shelves other than offerings from Age of Extinction. So seeing something from my favorite TF lineup is a sight for sore optics. Roadbuster was one figure I have wanted Hasbro to release for some time now. The Wreckers are always fan favorites, and Hasbro’s Roadbuster takes it one step further to completing this lineup (here’s to hoping they will do Broadside). There has been some third party Roadbusters, but I don’t want to pay those kind of prices on every fig. Hasbro Roadbuster is a solid figure. I like both the robot mode and alt mode. Transformation is simple yet fun. Appearance wise, Roadbuster retains his unmistakable G1 look. He’s got weapons galore! He will give AoE Hound a run for his money.

Sky Byte are Tankor are characters that I do not recognize. Out of all my Transformers, I don’t have any figures that transform into sharks, and that makes Sky Byte one-of-a-kind in my collection. The shark mode is pretty good too. In robot mode, Sky Byte could pass for a G1 Pretender Shell. Not exactly my cup of energon, but I can see some fans dig this. I am not at all familiar with Tankor. And no, this is not the Universe triple-changing Tankor that is a homage to Octane. This is a separate character, which I could tell you nothing about. This toy is… unique to say the least. He doesn’t particularly impress me in either mode. His appearance does not seem to fit into any of the TF continuities. This figure reminds me of an old 80s figure that I have. That figure is not a Transformer or a GoBot, but some other 3rd party line that was looking to cash in around the same time frame. I still have that figure at home somewhere. Maybe I’ll dig out that figure some day and compare it to Tankor in the future at some point.

The only 3rd party figure this month is MMC Talon, which is an homage to G1 Divebomb of the Predacons. If memory serves, I pre-ordered this all the way back in January of 2013. Back then I never even heard of MMC. All I learned was that some new 3rd party is doing Predacons, so I pre-ordered instantly. Talon was supposed to be the first figure released in that lineup. But then I heard that something less than perfect happened with the manufacturing of the wings, and MMC really wanted to get it right, so they delayed it’s release. Props to MMC for their dedication to perfection. I haven’t actually played with Talon that much. He comes packaged in robot mode. Transformation to bird mode is pretty simple, if I remember right. I had both Bovis and Fortis before Talon arrived, and Leo Dux and Tigirs soon followed Talon’s release. So when that happened, I quickly transformed Talon to arm mode to form the fearsome Feral Rex (aka Predaking)! As of this writing I still have them combined. I think I will separate them soon, and play with them individually some more.

This month I got two Beast Hunter Optimus Prime figures from TF Prime, both the Japanese and US release. You might wonder why I did that. Back in May of 2013, I bought the US version of the fig. I really like this fig. Both modes are nice, transformation is fun, and overall construction is sturdy. But furthermore, I bought this fig immediately after meeting the girl who would become my fiancee. I still remember that day well. We met at Starbucks and chatted for 3 hours. And in true TF geekness, right after I met up with her, I went to the nearby Walmart to hunt for TFs. That’s when I picked up this Beast Hunter OP. So yeah, this figure has sentimental value for me. Fast forward to July or August of 2014. I had the sword plugged into the right fist, which is a super tight fit. When I tried to remove the sword, the handle broke off from the sword, and now the handle is stuck in the fist. Apparently this is a common problem. My buddy Gemini had the same issue, and he had to heat up the fist to get the sword out. I wish I did that instead of trying to force the issue. Anyway, the fig is now imperfect. I don’t like any of my figs being imperfect, especially one that holds so much sentimental value for me. At first I looked at possible fixes. I know I can get a third party sword (which is better). But the handle is still stuck in the first, and there’s no way to remove it. And I can’t find any third party hands for this fig. So in the end I decided to bite the bullet and just get a new one. At first I got the Japanese version from Amazon. I chose this over the US version because of the more show-accurate blue sword, and to get the feeling I’m not buying the same thing again. But then I saw a US version of the fig on ebay for a good price, so I bought that too. I guess I went a little overboard.

The AoE figures this month are Lockdown and the two Bumblebees. After watching TF4 with the GF (before she was my fiancee) at the theater, she remarked I should get the black Lambo. Of course she was referring to Lockdown. At the time, I wasn’t even sure if Hasbro would make a Lockdown in the AoE Generations subline. But they did eventually. The figure is not bad. The vehicle mode is nice, but I feel it could have been more black instead of this weird brown/grey color. Robot mode is ok. Arms are a bit too long in my opinion. The deluxe Camaro Bumblebee is not too shabby, but it really doesn’t offer anything new after all the deluxe Camaro Bumblebees that have been made in the first 3 movies. He’s not the best construction-wise, though. I already broke off a shoulder piece that forms the front corner bumper. The little Bumblebee that came in the 2-pack is a repaint of the Generations Thrilling 30 Bumblebee. This Bumblebee is the one I featured in my last post.

Last but not least, there’s Masterpiece Sunstorm. He is a repaint of the new MP Seeker mold with absolutely no new additions or enhancements. This mold was only released twice previously in the United States, once as Thundercracker and once as Acid Storm. These two were Toys R Us exclusives, and Sunstorm also continues that trend. As Sunstorm, some fans have complained of construction issues, specifically that the wings don’t stay attached to the back in robot mode. But mine seems just fine. I have done enough gushing over this mold in the past, so I will not repeat that here.

OK… that was quite a lot of TFs. Next month it slows down. Can’t have this many figures every month, or I’ll go broke.

Transform and Roll Out.

Categories: On The Hunt, Pics

Transformers Purchased in June 2014

March 27th, 2015 Comments off

I’m finally back to cataloging my purchases for each month. This activity has been on hiatus for some time, and I’m way behind. June 2014 was a busy month in terms of TFs purchased, partially because of BotCon 2014 that took place this month. The convention was in Pasadena, California, and I always go if the event is at this location. I may make a separate post for my BotCon 2014 pics. But that’s getting off topic. Time to showcase the figures for this month. This is a long list. Prepare yourselves.

  • Generations Thrilling 30 Swerve and Flanker, Target, $9.49

  • Age of Extinction Drift, Walmart, $9.97

  • Age of Extinction Hound, Toys R Us, $24.99

  • Age of Extinction Slash, Toys R Us, $7.49

  • Age of Extinction Strafe, Walmart, $9.97

  • Transformers Prime Beast Hunters Bulkhead and Prowl, Walmart, $12

  • Transformers Prime Dark Energon Wheeljack, BBTS (at BotCon), $15

  • BotCon Exclusive Depth Charge and Rampage, Hasbro (at BotCon), $62.71

  • MakeToys Mobine MB01-SP2 Missile Launcher Marine Type, CapturedPrey.com, $48

  • Mastermind Creations Hexatron, CapturedPrey.com, $130

  • MakeToys Mobine Paladin/Chaos, CapturedPrey.com, $79

  • Renderform Gold Scout Upgrade Kit, CapturedPrey.com, $25

There are a lot of TFs here. 12 purchases in all, for a total of 13 figures and 2 upgrade kits.

Generations Swerve and Flanker were the first finds of the month. These are cool little figs. I don’t care much about the Mini-Con (Flanker), but Swerve is a real prize. He’s fun to play with. I like both his robot mode and alt mode. There’s a redeco of this fig out there as Gears, though as of this writing he’s kinda hard to find. I plan to get one.

Next up are all the Age of Extinction figs. As a whole, I think the AoE figs are rather disappointing. The Dinobots pictured here (Slash and Strafe) certainly attest to that assertion. I’m not particularly impressed with either of these and I’m looking to sell them. However, Drift and Hound are quality figures. Drift is probably my favorite of the deluxe figs from AoE. Hound is a solid voyager figure with weapons to spare. I have kind of reviewed them back in this post, so I won’t do it again. Just know that Drift and Hound are both solid additions to your AoE line.

All remaining figures featured in this post are either bought or picked up at BotCon. First up are TF Prime Beast Hunters Bulkhead and Prowl. Gemini bought these for me a few months before BotCon, but I did not have a chance to meet up with him til this event. He found this pair at his Walmart for $12 on clearance. I was really only interested in Prowl as I already have Bulkhead. At the time, Prowl was really hard to find (and he is still kinda is as of this writing). So I did not mind spending $12 for both figs.

At the BBTS booth I picked up Dark Energon Wheeljack. This is a BBTS exclusive. I could have gotten this from their website (for cheaper), but at the time I had nothing else I needed to buy from BBTS and I was already there so I went for it. Normally I don’t like buying repaints for the same character, but I really like this Wheeljack mold, and I love the transparent blue, so I splurged.

At every BotCon, Hasbro will sell some of their exclusive figs at their booth where they handle registration for Transformers Collector’s Club. This year was no exception. I mentioned back in the BotCon 2011 post that this was how I got the very rare Reveal the Shield Windcharger. In 2014, one of their exclusive figs caught my eye… Depth Charge! From Beast Wars, Depth Charge is one of my favorite characters. He’s a good guy, but at the same time a total bad-ass! Plus I love this mold. Terradive, the original character of this mold, is probably my favorite deluxe figure from Revenge of the Fallen. They repainted this awesome mold once for Space Case (from Dark of the Moon). I guess one could argue if using this mold for Depth Charge is fitting, but I don’t care. Depth Charge was about $20 if you have a TFCC membership, but without one the figure was about $40. So I decided to get the TFCC membership (about $42), which also comes with an incentive figure of Rampage. Hasbro chose to repaint TF Prime deluxe Megatron for Rampage. So for about $62 total, I got the TFCC membership, and two figures. Depth Charge and Rampage are rivals and nemesis of each other in Beast Wars, so it’s awesome having the both of them. To this day I still have not opened these 2. But I already know the Depth Charge fig will be remarkable. I know nothing of the TF Prime deluxe Megatron fig, so it remains to be seen how I will like Rampage.

And now for the figures I got from CapturedPrey. I bought all these earlier, some of them as early as the beginning of 2013. However, they don’t ship anything until your entire order comes in, at least that’s how it was at the time. I don’t know if they have developed some kind of stacking mechanism since then, like TF Source. Anyway, I still had several items outstanding at the time of BotCon, but I really wanted the figures that had already arrived. So I emailed CP and told them I like to pick them up at the booth. They were very accommodating. I picked up the four 3rd party items pictured above.

The Mobine Marine Missile Launcher kit by MakeToys is pure awesomeness! These kits really improve upon the crap that are PCCs. I featured this kit a little in this post. I tried this kit with Heavytread, Steelshot, and Undertow. Out of these 3, Heavytread looks the best, but it’s not bad with the other 2. My only regret is I should have also got the Jungle version. Apparently there were a shortage of the Jungle version, and most of the stock went to BBTS. MakeToys Mobine Paladin/Chaos is a similar toy, but with another smaller figure added in that will combine with the armor. This figure is a tribute to The Fallen (from the comics, not Revenge of the Fallen). The armor portion is more or less the same as the Mobine kits, but having a smaller figure combine with the armor to form The Fallen is an excellent idea. A pic of this figure appears here. This is way better than the piece of crap that Galoob tried to do with The Fallen that was featured in the Titanium line. I highly recommend the Mobine line from MakeToys.

Mastermind Creations Hexatron! What can I say about this piece that hasn’t already been said by others?! In case you can’t already tell, Hexatron is a modern interpretation of Sixshot by MMC. Way back in this post, when I first started this blog, I said I would love it if someone made a modern Sixshot. Well, to this day Hasbro still has not made this a reality, so MMC stepped up to the plate! What they delivered here is nothing short of spectacular. Hexatron is transformation engineering genius brought to life. I still have not transformed this figure to all its modes (I only did the robot mode and tank mode so far), but I have seen enough reviews of the other modes to know that all 6 modes are great. Construction of the figure is extremely solid. MMC cares about it’s products and it shows. And at only $130, this is actually not a bad value for 3rd party products of this size. Speaking of size, Hexatron is probably a better fit for the MP-verse than the CHUG-verse, but I’ll take it anyway I can. Of all the figs featured in this post, if you can only get one, this is it. In fact, if you wanted to nominate figs for Figure of the Year and 3rd party products can be included, then Hexatron would without a doublt be nominated. Many may even argue he would win.

That only leaves the Gold Scout Upgrade Kit, which I have yet to open. This set upgrades Classics Bumblebee to Goldbug. I’ll check this out when I have some time.

Whew… that was a lot. So much so that I didn’t even open them all yet as of this writing, like I mentioned above. But having a deluge of TFs is better than being in a drought. And BotCon 2014 was pretty special. I may report on it in a separate post. Til then… Transform and Roll Out!

Categories: On The Hunt, Pics

Random Autobot Pic

February 1st, 2015 Comments off

Here is a pic of some random Autobots, mostly from unrelated continuities.

Included in the pic are Transformers Prime Ultra Magnus, Age of Extinction Hound, Age of Extinction Drift, and Robots in Disguise Grimlock. With the exception of Drift and Hound, these Autobots don’t have anything to do with each other. Why am I putting them in one pic? No good reason. I had some Autobots lying around the house in various places. I was about to put these away, but thought I feature them in a group shot before they go in the closet.

Drift and Hound I sort of featured in my last post. Drift is by far my favorite deluxe mold from Age of Extinction. As a whole, AoE toys are disappointing. But Drift is one rare example of a good figure from this crappy line. He looks good in both molds. His transformation is just the right difficulty, not overly simple and not overly complex. Construction of the figure is solid, and while the transforming mechanism is nothing new, in this case it works by following a tried and true formula. Some have complained that Drift falls apart in alt mode. I sincerely believe those with this complaint did not transform him right. Hound is another good one from AoE. He has… count this… 8 weapons included! This has gotta be a record, for a official Hasbro release anyway. The weapons can be combined in many different configurations. Hound can use them all separately, have some of them combine for more firepower, or have them all merge into a giant rifle. The figure itself is also not too shabby. Hound’s alt mode is fairly solid, and the robot mode does a good job of capturing Hound’s big and round appearance from the movie. The transformation of the figure is also fairly unique.

TF Prime Ultra Magnus is a repaint of the Robots in Disguise voyager Optimus of the same line. I think this mold works much better as Magnus. In fact, I feel like this mold was always designed to be Magnus, and for whatever weird reason Hasbro decided to release this mold first as Optimus. The First Edition mold of Optimus is superior anyway for that character, so it works that this mold is used for Magnus. I like how the toy comes with his hammer (I think in the show they called it the Forge of Souls). Too bad the color is not right.. in the show it’s supposed to be gold.

Robots in Disguise Grimlock is the only figure I have from this new line. I don’t know much about the show, but so far I’m not liking the designs. I had the get this figure though, since it’s Grimlock. He’s a fun figure. Among the figs in thie pic, I transformed him the most. Mostly because he’s easy to transform. I like him. I know a lot of hardcore TransFans would probably bash this figure. I see him as something you can just pick up and play. And I feel he does look good in both modes. Articulation is limited however.

Autobots… Transform and Roll Out.

Categories: Pics

Cybertronian Halloween 2014

October 31st, 2014 Comments off

It is that time again my friends! Halloween is upon us. Do Tranformers celebrate Halloween? Probably not, since they can transcan and transform, it’s like everyday is Halloween.

Here is another pic where I take my orange plush pumpkin with some orange Transformers.

Click here for the 2012 version. Scroll to the bottom for the pic.

Honestly, there just ain’t that many orange TFs. I tried to find some other than ones I already used in 2012. What you see in the pic is all I can come up with: Generations Scoop, Generations Sandstorm, G1 Wideload, and Prime Voyager Predaking. Some of these are even questionable as orange. Sandstorm is actually mostly yellow, but with enough orange bits. Predaking is probably about half orange and half black.

And of course I gotta mention that the San Francisco Giants is once again world champs! The Angry Bird plush with the Giants cap is to help celebrate that fact. In the last 5 years, Giants win the whole thing every time on the even number years. So are they gonna be champs again in 2016? And it’s always so fitting they win it around Halloween. The Orange and Black is oh so fitting!

Happy Halloween! Transform and Roll Out!

Categories: Pics, Uncategorized

Transformers Purchased in February 2014

September 14th, 2014 Comments off

Here are the TFs I bought back in Feb of 2014.

  • Transformers Prime Leader Class Predaking, Target, $16.61

  • Maketoys Giant, tfsource.com, $379.99

I opened all the Deluxe Generations Thrilling 30 figures. I highly recommend Armada Starscream. This particular version of Starscream is a welcome addition to the Generations line. I have the original Armada Starscream also (with Swindle Mini-Con), and it’s amazing to see how much this figure as evolved. Release of Fall of Cybertron Skywarp is no surprise, given how much Hasbro likes to repaint the Seekers. Still, this is a great mold, and in my opinion the trio of Starscream, Thundercraker, and Skywarp must be completed in every line. Scoop is an odd choice for inclusion. In G1, he was a Targetmaster that didn’t appear until Season 5, by which time the US cartoons had already ended. I have Scoop from G1, and he’s still in really good shape. This new Scoop is a direct homage to that figure, but with way better toy engineering and way, way better poseability. He remains a Targetmaster and that is a welcome feature. The Mini-Con Assault Team is something totally unexpected for me. I’m not sure what their origins are. Still, the figure itself is decent. I didn’t like it at first, but over some time it grew on me. But I should point out that this figure does not have the best construction. There are lots of parts that love to fall off, and during transformation it’s more likely that bits and pieces will unintentionally detach.

I have not opened Leader Class Predaking yet. Target was clearing these out at such a low price that I had to buy one, however.

Last but not least, there’s MakeToys Giant. I missed out on buying this set when he was first released. This set I purchased is the 2nd release of the green version. There are many reviews on this set already, so I won’t go into it. But I will say that if you like the Constructicons, then this set is a required purchase. MakeToys pays an incredible homage to the original G1 Devastator with this amazing update. Fans love to compare this with TFC Toys Hercules and try to determine which is better. Now that I have both, I will say that they each have their pros and cons. I can’t decide so I just got both.

Below is a pic of Intimidator, Giant, and Hercules all appearing together. Autobots beware! Bumblebee is already feeling the pain.

Transform and Roll Out.

Categories: On The Hunt, Pics