After a LONG hiatus from me documenting my monthly TF purchases, I’m gonna continue here. There’s a lot of TF purchase action in June. Let’s get started.

• Studio Series Brawl, amazon.com, $29.99

• Studio Series Megatron, amazon.com, $29.99

• Power of the Primes Snarl, Target, $16.99

• Power of the Primes Moonracer, Target, $16.99

• Titans Return Trypticon, Amazon seller, $103.65

• Zeta Toys Flyfire, gift

• NBK Bulldozer, showz.com, $9.99

• ToyWorld Constructor, chosenprime.com, $469.99

Brawl

SS 12 Brawl is my third movie Brawl figure. The first one is the original leader class figure that made 2 of my top ten lists (most difficult and broken). The 2nd one is the original deluxe figure, which I never opened. I really don’t have too much recollection of leader class Brawl. It’s a big figure, sitting at the bottom of a box in a closet somewhere. That’s the problem when you have too many Transformers; you just don’t have enough time for all of them.

It’s inevitable that there will be comparisons of this SS 12 Brawl to leader class Brawl from the first movie. And I can’t do that compare here. All I can do is rate SS 12 Brawl on its own.

Like all offerings in the Studio Series line, Brawl is packaged in robot mode, and comes with cardboard backing that may be used as the movie backdrop. In Brawl’s case, he gets a very fitting graphic of the battle in Mission City from the first movie.

Brawl’s robot mode much resembles his movie appearance. He only appeared in the first movie, but the toy designers captured his look in this figure quite well. Construction of the figure feels good. Joints are at the right tolerance, nothing too tight or too loose. There is a lot going on in this figure as far as weapons, but nothing feels out of place as the solid construction is able to keep it all together. Most of the fiddly bits clean up quite well in robot mode. And if something is dangling around, it is more intended as part of the design and not a production flaw. The back of the robot cleans up nicely too (which I should have took a pic). There’s not a lot of unwanted kibble on the back, so kudos to HasTak.

Brawl is a bit limited in the articulation category. Part of it is because of his design; he’s very bulky with lots of kibble, and that in itself limits articulation. The design of the feet, while movie accurate, don’t allow for any ankle tilt, which hinders poses. The hands are molded directly into the forearms, and don’t come out. Arm articulation as a whole suffers from all the weapons and extra kibble present all around.

Transformation to tank mode is fun. I don’t remember any other figure quite like SS 12 Brawl, not even the original leader class figure. The leg transformation is fairly straightforward. Arms form the tank turret, and they come together in an interesting and unique way. The hardest part to describe is the chest. This section folds on itself several times, and there are other minor pieces that complement this scheme to produce a robot to tank transformation unlike anything else we’ve seen before. SS 12 definitely gets points for transformation originality.

In my opinion, the thank mode looks really good. This is on par to the looks of the leader class Brawl figure in alt mode. In the movie, I think there is only one scene of Brawl in tank mode. It was when he was first summoned along with the rest of the Decepticons. This tank mode looks extremely close to that tank on screen. There are no working tank treads here, but I wasn’t expecting that for a $30 toy. With all weapons attached in tank mode, Brawl really looks like the menacing ground assault Decepticon that he is.

Brawl comes with 2 accessories: a missile launcher with 4 missiles, and a claw type weapon. Add to that all the molded-in weapons (the main cannon, 2 sub cannons, and 2 4-set missiles, all on the turret), he will give Age of Extinction Hound a run for his money as the TF with the most arsenal. I recommend SS 12 Brawl with no reservations.

Megatron

I never realized something until I started doing this post, and I had to confirm by looking at my TF List: I only have 2 movie Megatrons! Considering how many movie Optimus Primes I have, that’s almost a crime. The two movie Megatrons I have is Dark of the Moon voyager fuel truck Megatron, and The Last Knight voyager jet Megatron.

I never got the original jet leader class Megatron from the first movie, or the ROTF leader class tank Megatron. I didn’t want them as a silent protest to how Michael Bay completely butchered the G1 roots of Megatron and created this weird amalgamation that is supposed to represent the Decepticon leader. In retrospect, I kind of regret not buying them. From a pure toy perspective, they were unique, and Hasbro never released anything like them again.

So when I heard that the Studio Series are coming out with a new take on ROTF Megatron, I had to look into it. Here is the figure in robot mode.

I’m never gonna warm up to the looks of movie Megatron. I’m a G1 die-hard that will never recognize this as Megatron. But that being said, and rating purely on the toy’s representation of the movie depiction, I love the look of SS 13 Megatron in robot mode. His proportions are very balanced, and HasTak captured that alien bug-like appearance of Megatron really well. I like the giant sword weapon that he has in the right arm. All the mechanical tentacles on the left arm gives me a satisfying yet creepy conception of what could happen if they got hold of unsuspecting Autobots (or any other kind of prey).

Construction of the figure is solid. Megatron has the articulation chops for a variety of poses, and the solid construction allows him to hold those poses. For the most part, he’s a kibble-free figure. That’s not easily done with a design like his. Much credit to HasTak here.

SS 13 ROTF Megatron is not too shabby in alt mode, either. I like the look of this alien tank. I’m not sure how close it looks to the movie, though I will admit that my recollection of ROTF the movie is faint at best. I honestly don’t even remember Megatron in alt mode, but I’m sure there are fans out there that will correct me.

I do feel like SS 13 Megatron is one of those figures that, if you haven’t transformed it for some time, it will throw you for a loop. That’s especially true for robot to alt mode. This Megatron tank is alien, so there’s not the usual earth mode cues to go on. Everthing does tab into place, however, so you know you didn’t do something right if the resulting alt mode feels more floppy than solid. I think for that reason, I didn’t like this piece at first. But he grew on me, and on subsequent transformations, I regard SS 13 Megatron as one of the better figures in the Studio Series line. This figure gets my recommendation.

Snarl

Continuing the trend of the Power of the Primes Dinobots, this month we get Snarl. Grimlock, Slug (aka Slag), and Swoop were released in January, while Sludge came around in March. Snarl completes everybody’s favorite quintet of dinos.

He comes in robot mode, like all the other PotP dinos.

I really like Snarl, and I am happy that HasTak has finally given him some official love by updating the G1 version of this character. But PotP Snarl is a mediocre figure in every sense of the word. Overall transformation is the same standard scheme that every G1 fan is familiar with, albeit updated with some modern mechanics. He comes with his classic sword, but no blaster. Poseability is sort of there, not great yet not bad. Construction of the figure is adequate. Some parts are a bit too loose in my opinion, but not so horrible that the figure can’t hold any poses on its own. The figure is somewhat playable. You think he would be easy to transform, and that’s true for the most part. But PotP Snarl is one of those figures that, if you haven’t touched it for a while, it will surprise you with transformation impediments here and there. Not because it’s hard, but because there are little mechanical details that you are supposed to remember, but you don’t because you either forgot or didn’t think it’s important.

The one good thing about PotP Snarl is that he looks good in both modes. Here he is in dino mode.

For a retail deluxe class figure, I think the detail on PotP Snarl is more than adequate. You won’t confuse this character with any other.

The 5 Dinobots will combine. I never tried this, but I might if I get bored enough. I have mentioned before that I wish they didn’t, because implementing combination mechanics means putting restrictions on other aspects of the figure, such as the dino modes, robot modes, and sizes of the figures. Grimlock at voyager size is fine, but I do wish the other Dinobots are bigger than deluxe.

If you got the other 4 dinos, then you will get this regardless of what I say. It’s hard to see anyone buying just Snarl and none of the others. But if that happens to be you, then you are indeed an original. Bravo.

Moonracer

HasTak has been releasing many Fembots in recent years. The female Autobots was something completely made up by the G1 show creators in a desperate attempt to win over more girls to the toyline. Whether that worked is anyone’s guess. But what it did do is create demand for toys of the Fembots among the hardcore G1 TF nerds.

HasTak loves you and has started creating toys of the Fembots in CHUG. In January of 2015, Generations Thrilling 30 Arcee and Chromia were introduced. Then PotP Elita-1 was released in March of this year. This month we get Moonracer, one of the original 4 Fembots in the G1 episode “The Search for Alpha Trion”.

First let’s take a look at Moonracer in robot mode. Looking from the front, the figure is not half bad. She’s got a distinctive female body shape, and the head mold resembles her cartoon design fairly well.

But looking at Moonracer from the side, this figure becomes a total fail. Look at that huge backpack. Moonracer has got some serious back junk. Maybe that’s how Powerglide likes it.

Transformation to alt mode is pretty easy and intuitive, so I’m won’t describe it too much. Moonracer is a bit guilty of being a shell-former. Not G1 Scourge bad, but still a shell-former nonetheless. That huge backpack should have clued you in.

The alt mode itself is not badly done. I don’t remember how Moonracer really looked in alt mode, and I’m not going to look it up for the purpose of this post. Power of the Primes Moonracer has a vehicle mode that looks truly Cybertronian, and that works well enough in my book.

So do I recommend Moonracer? If it wasn’t for that giant backpack issue, I would classify this figure as good. But as it stands, Moonracer is still a decent toy. The robot mode is not half bad, as long as you’re only looking at it from the front. Poseability of the figure in this mode is solid. I have no complaints about the alt mode. But if you’re even remotely thinking about buying Moonracer, you are probably a G1 fan that grew up with the cartoons. If that’s the case, you will go buy this figure no matter what I say. Having these characters come to life 30+ years later is a G1ers dream come true. Go buy the figure and fully engage yourself in the TF nerdgasm that is Moonracer.

Trypticon

I first reported on the news of a Trypticon release back in March of 2017. I think in the fall of 2017, Titans Return Trypticon was released. It’s generally agreed that this is a good fig, though reports of hips breaking from the super tight hip ratchets put a damper on things. There are many proposed fixes out there; Google the topic and you’re bound to find some good ones.

With Metroplex and Fortress Maximus, the prices quickly dropped after only a few months of its release. I’m not sure why that is. My theory is that there are only so much demand for such figures. Titans class figures that are clearly G1 inspired would only appeal to the most hardcore G1 enthusiasts, willing to part with hundreds of dollars on a single Transformer figure. The average Transformer fan would take a look in store, stare at the figure in awe, and walk away. Little kids who happened on these figs in the toy aisle would have a hard time convincing their parents to buy such items, and that’s if they even took an interest in the first place.

MSRP for Trypticon is $149.99. Not surprisingly, the fig was going for around that much upon first release. But I was expecting this to follow the pattern of both Metroplex and Fort Max, and have the price reduced soon. I got Metroplex for a bit over $100, and Fort Max for $75. The 2017 Holidays rolled around, and Trypticon was still close to MSRP. I think the lowest I saw at the time was around $120 on Amazon, and after adding in tax it would go over $130. I thought it could go lower so I waited, but then the stock dried up and no more Trypticons would go on sale for a while.

Fast forward to June of 2018, and I saw one third party seller offering this at $103.65. This was a third party seller on Amazon, and not in the same state as me, which means no sales tax. So I quickly jumped on this and got me Trypticon.

I am disappointed to report that, to this day, my Trypticon still sits in the closet, unopened. I don’t know why I’m so hesitant. Maybe it’s because I know of the hip ratchets issue. Maybe I was always more of a fan of Metroplex. Or maybe I’m just too busy, with a 2 year old baby girl in the house.

But I’ll get to this one day. And if you’re reading and think you missed out, don’t. I just checked. Amazon has Trypicon at $109.99, while bbts has it at $99. Value of Trypticon has not gone up at all. Maybe the hip ratchets thing really hurt it. Compare that to Metroplex, which third party sellers on Amazon list at about $650.

Flyfire

I first mentioned Zeta Flyfire back in this post. And in the purchase post for last month (May 2018), I went into Air Strike. So I won’t repeat all that stuff here. Just know that these 2 Zeta Aerialbots are highly similar, definitely cut from the same cloth.

In the pic below, you see that Flyfire uses the exact same kind of packaging as Air Strike. And just like Air Strike, Flyfire comes with the same number and kind of accessories: a rifle, 4 missiles, instructions, and bio-card. Very minimalist, and in my opinion not a bad thing.

Flyfire in bot mode below.

Overall, I would say that Flyfire is about the same as Air Strike in robot mode, but comes together better in jet mode. I mentioned that, for Air Strike, there’s this weird issue with the front landing gear in jet mode. Flyfire has no such issue. It seems like Zeta fixed these minor annoying things this time around. Flyfire is the sophomore release in this series and it shows.

As of this writing, all 5 Zeta Aerialbots are released. My friend Gemini has all 5, and pics of the combined mode into Zeta Superion is impressive. However, Fans Toys have come out with their own set of Aerialbots. I have not yet decided if I want to stick with Zeta, or change direction mid-course and go with Fans Toys. I have a hunch that I will make this decision based on how I feel about Roadking, FT’s version of Motormaster. I received Roadking a few weeks ago, but have not had a chance to open the fig yet.

Bulldozer

By the end of 2015, there already exist several modern interpretations of Constructicons. Two were done by 3rd party: TFC Toys Hercules, and MakeToys Giant. Hasbro also released it’s own update on this popular combiner group. None of these sets are perfect, each with its pros and cons. But all of them can be considered good, and you can make a case for each as to which is the best. Instead of being forced to choose just one and suffer analysis paralysis, I got all 3. And if you were to point a fusion cannon to my head right now and force me to choose the winner among these 3, I probably go with Hercules by TFC Toys.

As if all these options weren’t already enough, in 2017 two more 3rd party companies decided to enter the fray and do their own take on Constructicons. One is Constructor by ToyWorld, which is the next entry (scroll down below). The other is ReBuilder by Generation Toy.

For those that don’t know, NBK is 4th party (read: knock-offs of 3rd party). I have no idea what NBK stands for. In this case, NBK Bulldozer is a knock-off of Generation Toy ReBuilder GT-99D Bulldozer. NBK didn’t even bother giving this figure a new name and just stuck with Bulldozer. And we all know this is supposed to represent Bonecrusher.

So is NBK Bulldozer any good? For a knock-off, it is surprisingly good! It’s packed in alt mode. The box is very minimal, but I will stress again I consider that to be a plus. As for accessories, he comes with a pistol, and the attachment that will become the forearm.

In alt mode, all pieces come together to form a nice cohesive whole.

There is placement for the forearm attachment in alt mode. It can be hooked up to the rear, like a trailer.

The pistol can be folded and tucked underneath the vehicle. See if you can identify where it is in this pic.

I’m guessing Generation Toy took some liberties with the design of Bulldozer, but to me he still seems very G1 for the most part. For color issues, the giant one that immediately pops up is why is the bulldozer blade purple. That’s probably a question that only NBK can answer. Knock-offs are notorious for botching color schemes, and whether or not that’s intentional is anyone’s guess.

Transformation is fun. And I will emphasize that again… FUN! That’s something I feel is often missing from today’s Transformers. 3rd party will often make something that is impressive in how it transforms, but transforming it becomes a chore. And as for HasTak, sometimes the figure is so simple, there is no fun. Sometimes bad construction issues ruin an otherwise well designed piece that would have been fun. NBK Constructor suffers from none of these pitfalls. The superb design is probably more a credit to Generation Toy, but NBK has built a piece that feels more than solid enough to be played with. All joints are at the right tolerance. Things snap together when they need to, and come apart when they should.

The transformation process itself should be familiar enough to anyone who has played with enough G1 style TFs in the modern era. But it’s not super-obvious either, with enough challenge to offer mature fans something to marvel at. Some G1 diehards will complain about transformational design changes, such as the 180 turning at the chest and how the bulldozer blade splits and ends up on the shoulders. I personally feel these are refreshing changes that offer a different yet familiar take on an old and tired scheme.

Below are some pics of the robot mode. I’ll let them do the talking.

Again, G1 diehards will complain about the non-G1-ness. But I like it. Bulldozer is well proportioned in robot mode. He looks different enough from G1 Bonecrusher, but still similar enough to be Bonecrusher. The figure is pretty poseable. And again, I don’t know if the purple bits are by design, this being knock-off and all.

The head mold should satisfy all G1 requirements.

The designers of this mold did account for storage of the arm attachment in robot mode. I guess this is supposed to be a giant backpack thruster kind of thing. It’s kind of hokey, but hey, they tried. Points for effort.

As for the arm attachment in combined mode, the fist flips out from inside the forearm. I like this. I’m not a fan of using extra combining pieces, and GT really minimized this in the design.

Overall I really recommend this toy. Get the Generation Toy version if you don’t mind spending the money. Or get this NBK KO version if you’re on a budget. Speaking of being on a budget, this is the first and only time I got something from ShowZ. I heard about the store, prior to this. At only $9.99 for NBK Bulldozer, I had to try it. That’s $9.99 from China, no extra shipping fees and no taxes! The figure arrived in reasonable time. So if you’re hesitant about the store, don’t be. ShowZ is legit. It’s not one of the China scammers that I have wrote about.

As of this writing, I do have all 6 of the NBK knock-off Constructicons. But I’ll save my thoughts about this NBK set for another day. Because we have something extraordinary to get to. And that is…

Constructor

I saved the best for last. Ladies and gentlemen… I give you… (drum roll)… Constructor!

I will say this right now, so you don’t have to read through all the details: if you want the best Devastator in this modern era, then pick up ToyWorld Constructor. This is hands down the best team in the combined form! If you care nothing for the individual robot or alt modes, then this is the set for you. ToyWorld Devastator is truly worthy of the name, and will put all other Devastators to shame.

But just to be complete, I will show pics of the other modes. Below is each fig in alt mode.

Individually in robot mode.

And now the pics you have been waiting for… the combined mode! Behold the awesomeness that is ToyWorld Constructor.

I spent $469.99 buying this set, and in this form, he’s worth every penny. Constructor is at the size he needs to be to properly scale with MPs. ToyWorld really hit it out of the park with this awesome set.

Doing a full review here won’t pay enough homage to group, so I intend to do a separate review later. So I will quickly list some pros and cons in bullet points.

Pros:

• Awesome Devastator! (I can’t say that enough)
• Solid build and construction
• Nice individual robot and alt modes
• G1 accurate – TW took very little liberties in the design
• Fun transformation that’s intuitive and not frustrating

Cons:

• Uses combining parts – and many of the parts have nowhere to go when in individual mode
• Individual modes do not scale well in MP – way too big

The bullets in Cons are points you kinda would expect, for Constructor to be so good. Unless someone really figures out show to mass shift, either the combined mode would be too small, or the individual bots would be too big. TW took the latter approach, but that’s to give us a Devastator that is truly representative of what we see in G1. As for using combined parts, I will concur with the naysayers and agree that it’s kinda cheating. Especially when the parts have nowhere else to go in the individual modes. But the proportions of Constructor is so good, I’m almost willing to forgive this. Almost. How you feel about using combiner parts is up to you, but I still see it as a negative.

When this set was first released, each bot had to be purchased separately, costing about $100 each. TW has gone away from that and now only release the complete set as one. The edition that I have here is the regular edition. It’s a very minimal set that only comes with the essentials. I don’t even remember if I have the Devastator gun, I’ll have to check. Other editions come with extra heads and different color thigh parts. TW knew they had a winner here, and kinda went crazy and released all sorts of different versions of Constructor. There’s a yellow one, an orange one, a clear green one, a clear orange one, a limited edition metallic one, and some more that I don’t remember. As of this writing, this regular edition that I feature here is on longer available. But there is a limited ultimate edition that costs about $500. I’m not sure what’s exactly in this ultimate version, but I see that it has more realistic paint. Some minor tweaks to the molds were made, probably after getting fan criticism on certain issues. It might come with all the extras. For only $30 more on top of what I paid, I wish I waited for this version. Oh well. Am I hardcore enough to get this version too? Most likely not. Probably not. I hope not.

And another quick FYI… sometimes the other color sets may go for crazy cheap. I think I have seen the clear orange one go for $299. It might have been ShowZ. Or maybe one of the other dealers on a weekend sale.

Whew… that was a WAY longer post than I had intended. Sometimes when the writing mood hits me, I don’t stop. This may have been my longest post ever. Longer post equals more proof reading, something I hate doing. It takes time away from playing with the awesome figs featured here.

Transform and Roll Out.

 

March of 2018 continues with a random assortment of Transformers. And for the first time in a long time, there are two purchases for the same character! I’m not sure if the last time this happened was February of 2016, when I got two Onslaughts. You can try to guess the lucky Transformer that this happened to, or just scroll down to see who it is.

• Power of the Primes Rippersnapper, amazon.com, $16.99

• Power of the Primes Elita-1, Walmart, $24.97

• Studio Series Thundercracker, Toys R Us, $29.99

• Power of the Primes Sludge, Target, $16.99

• Mech Fans Toys Slurdge, eBay, $20.99

• Kubianbao MCS-01 KBBMP10-V, eBay, $42.99

Rippersnapper

I went into Rippersnapper and the rest of his Terrorcon cohorts back in this post. But to quickly summarize, all the Terrorcons are pretty good. Terrorcons are the ultimate version of combining figures that started in Combiner Wars and then evolved to peak form in Power of the Primes. Rippersnapper is a required purchase if you collect the combiner teams.

Elita-1

It’s good to see that Hasbro is continuing the trend of properly releasing fembots in the CHUG-verse. What I mean is that these are new molds introduced in CHUG, made specifically for the character they represent, and not repaints of other TF lines. It started with Generations Thrilling 30 Arcee and Chromia, in late 2014 / early 2015.

Elita-1 in PotP is the next fembot to continue this treatment. We got this mold for Starscream, back in December of 2017. It’s debatable if this should be classified as a prepaint. Starscream is the more famous character, but this mold was always meant to Elita-1. Using it first for Starscream was another quick cash grab on Hasbro’s part.

As for the toy itself, I think it’s just ok. None of the three modes are all that good, if you ask me. The jet mode is too bulky. The robot mode has too much kibble. And the combined body mode doesn’t serve the purpose well, when compared with superior body combining figs like Hun-Gurrr or Silverbolt. Transformation between jet mode and robot mode is so simple it’s not even worth describing. Making Elita-1 the body of a combiner seems entirely unnecessary. A superior figure could have been made if the mechanics needed to combine were left out. I suppose the only real reason to get this fig is to have a proper CHUG version of Elita-1. She is a character that only true G1 fans would know about. If you know nothing of the character, then it’s best to leave this figure on the store shelf.

I will point out that this figure has a terrific head mold, which may be its one redeeming feature as a toy. Check out the pic below. This head design is derived directly from the G1 animation. That’s right G1 fans. Hasbro loves you.

Thundercracker

Studio Series Thundercracker is another Hasbro cash grab. I was under the impression that Studio Series were all new movie molds, but that’s simply not the case. This Thundercracker is a repaint of Nitro from The Last Knight. As good as that figure is, I don’t think this repaint is all that relevant. I don’t remember Thundercracker making an appearance anywhere in in the movie-verse.

Still, I got this fig because he is a Toys R Us exclusive. And because I knew this was gonna be the last thing I buy from Toys R Us. If you don’t have Nitro, or if you dig that figure in these blue and grey colors, then go ahead and buy Thundercracker. Otherwise, this purchase is not recommended. I still have not opened Thundercracker to this day. I’ll probably re-sell him someday.

Sludge

Continuing with Dinobots in Power of the Primes, Sludge makes his appearance this month. He is a solid edition to the team. Both modes look good. Transformation is a bit on the simple side, but it’s different enough from the usual way Sludge transforms to make this figure refreshing. PotP Sludge is a great toy to just pick up and play.

Transformation from robot to dino deserves some explaining. There are some key variations from the usual G1 Sludge transformation scheme. Flip up the dino head and neck from the back, but a rotation of the neck is necessary. Close the wings like normal, but the wings form a full closure, and the contact point is where the dino back is. The waist needs to rotate 180, then fold the robot legs. Forearms need to rotate 180 so the fists face the other side. Those are the key differences. If you followed all that, you will see that the back of the dino is where the robot chest is housed. All other transformation mechanics are there to account for that difference. It sounds complicated when I describe it, but it’s really not. Like I said, PotP Sludge is simple for anyone to transform, and that goes double for any TransFan who’s been around since G1.

If you got the other PotP Dinos, then you will get this regardless of what I say. And if you don’t, get Sludge anyway.

Slurdge

From Sludge we go to Slurdge. That’s not a mis-spelling. Slurdge by Mech Fans Toys is 4th party, which means it’s a KO of a 3rd party product. I know next to nothing about Mech Fans Toys. Even their name sounds like a ripoff of Fans Toys.

MFT may think that they can add “r” in there and no one is the wiser, but it doesn’t take a rocket scientist to see that this is Sludge. And Yes, Sludge the character get the proud distinction of being represented by 2 different figures in the same month. I believe MFT Slurdge is a KO of a DX9 product. Though MFT did give it way better paint. Look at all the bling on Slurdge in the pics below.

The only other MFT product I have is Grmlock. Be prepared for a good workout, because both MFT products will test your hands when transforming. There are some moving pieces on these figures you will have to pry open. Both high strength and high dexterity are required.

Transformation scheme of Slurdge is also unique. It deviates from the standard G1 scheme, even more so than PotP Sludge. What folds up from the robot back to cover the robot head is the dino tail, instead of the dino neck and head. The robot arms become the hind dino legs. The robot chest needs to flip down, then rotate and fold downwards toward the robot legs. The dino front legs and neck and head are all folded inside the robot legs, and they need to come out. Stretch out the robot waist then fold the robot legs unto itself. This is most definitely an original implementation of how Sludge transforms. And the dino mode looks so good. See below for yourself.

Playing with the figure can be a chore. In addition to the tight joints, some bits and pieces need to be angled perfectly to have enough clearance to get to where it needs to be.

Slurdge comes with a black gun (pictured above) and a clear red sword (not pictured).

All in all, I like this MFT figure. Yeah it’s a KO of something else, but they did add nice paint to their offering. At a price point of being in the low 20s, it doesn’t break the bank. Dinobot fans should check this out.

On a related note, most of the modern Sludge figures made have original transformation schemes from G1. The only Sludge that follows the G1 scheme is Fans Toys Stomp. Mech Fans Toys Slurdge, ToyWorld Muddy, and Power of the Prime Sludge described above all implemented a new unique scheme.

So who wore it better? PotP Sludge or MFT Slurdge? I’ll be doing a in-depth analysis of these 2 in an upcoming post. Stay tuned.

KBBMP10-V

For those of you that are unfamiliar with Kubianbao (KBB), they are another KO company. As far as I know, none of their products are original creations. They tend to make KO figures out of official HasTak products. Now that’s not to say what they produce is bad. In fact, many TransFans have stated their figures are superior to what HasTak churns out. A prime example of this is their version of official MP Seekers. HasTak has used that mold so many times now that the later production runs are plagued with build and construction issues. KBB, being KO and all, does not have such problems.

KBBMP10-V is Kubianbao’s KO take on the MP-10 Optimus Prime. However, this figure is now downsized to Voyager scale. KBB didn’t even give this a name, they just called it KBBMP10-V. So let’s break apart this designation: it’s from KBB, a KO of MP10, at Voyager scale. KBBMP10-V. Very apt.

Now you might be thinking to yourself, “KO is crap!” Well, let me state this now with no uncertainty: MBBMP10-V SCREAMS QUALITY!!! Everything from the packaging to the figure to the accessories, MBBMP10-V is produced so well that HasTak should be ashamed of themselves for not being up to par. Let’s start by looking at the box.

The box is made of high quality hard cardboard, not unlike the kind used for Warbotron Turbo Ejector. Are you seeing this Hasbro? KO products are doing it better than you.

Paint and finish of the figure is top-notch. Below are some pics of the truck mode.

Transformation of the figure is just like MP-10, so I won’t go into it too much. Below is a pic of the robot mode with a nice rub-on decal on his left shoulder (duplicated from this post).

Look at all these accessories!

• 3 extra heads: 2 are a different style of Optimus, and 1 is Orion Pax
• energon axe with energy ball attachment
• standard Optimus rifle, folds and stores onto the back like the official MP-10
• Megatron in alt mode with shoulder stock attachment
• jetpack (only used once in the cartoon, but it’s become an OP accessory staple)
• sword (used by OP in the movies)
• Matrix of Leadership; not pictured, can be placed inside KBBMP10-V

I highly recommend KBBMP10-V. Essentially, it’s MP-10 scaled down to voyager size. So if you need a G1 accurate OP to go along with your CHUG figs, this is the toy to get. It may be KO, but it’s so well done. And at only around $40, you’re getting a quality figure in a quality box with tons of accessories.

That’s it for this knock off heavy month. Will I ever buy more KOs in a single month than legit and 3P products? Only time will tell.

Transform and Roll Out.

 

Only 2 Transformers were purchased in July of 2017. This is the lowest purchase count in a month since March of 2014. But what was lacking in quantity, this month makes up for in quality.

• Titans Return Seaspray, Walmart, $9.84

• Fans Toys Stomp, thechosenprime.com, $199.99

I already reviewed Titans Return Seaspray. He’s a terrific little figure that all G1-ers need in their collection.

Now let us focus on Stomp, a 3rd party Masterpiece interpretation of Dinobot Sludge. Stomp is produced by Fans Toys, and Fans Toys is probably the highest regarded 3rd party toy company in the TF fandom. And I’ll get straight to it: Stomp is an awesome figure! FT hit this one out of the park and delivered a MP Sludge figure that exceeded all expectations.

Stomp is the 4th Dinobot figure I have from FT. FT calls this line of figures the Iron Dibots. The first one I got was Scoria, their tribute to Slag. Scoria was pretty good for it’s time as the first MP style Dinobot by a 3rd party. But it is kind of lacking by today’s standards. And from a build and engineering perspective, Scoria was not without its issues. Many have complained about loose shoulder joints. Mine is ok, but I don’t like how Scoria’s hip joints droop down when the figure is picked up, because the weak hip joints cannot support the heavy die-cast legs. Next I got Sever (Snarl) and Soar (Swoop). These 2 were much better. I hold both of these in very high regard, close to TF perfection. Now I’m happy to add Stomp to the mix.

Like I mentioned already, Stomp is awesome, like his brothers Sever and Soar. Stomp deserves a review of its own, but I will mention here some quick points on why you need Stomp in your collection.

• Look great in both modes! Robot mode is well proportioned, and dino mode is large and intimidating.
• G1 accurate transformation. Sometimes 3P takes too many liberties in the way a figure transforms. I give that points for creativity, but some may consider it straying too far from the original source. Stomp’s transformation scheme is identical to that of G1 Sludge. Obviously it’s implemented with modern day engineering, which takes me to my next point…
• Solid build and engineering. It seems that FT took all the lessons learned from the previous FT Iron Dibots, and improved on their design choices in how Stomp is constructed. The drooping hips/legs issue I mentioned for Scoria, none of that applies to Stomp. There is a spring tabbing mechanism that locks Stomp’s hips into place in robot mode. So despite the heavy legs, no drooping occurs. Bravo Fans Toys!
• Quality materials used for the figure.
• Comes with working LED blaster and sword.
• Premium paint job.

There are other pros about the figure, but I’ll stop here. Check out some pics for yourself.

Stomp comes packaged in robot mode.

With his pal Soar.

Stomp in his awesome dino mode.

With his creator Wheeljack.

With ToyWorld Muddy.

Now I am debating if I should buy Fans Toys Grinder (Grimlock) to complete the set of FT Iron Dibots. I have MP Grimlock, but he’s too small when scaled next to the Iron Dibots. I can’t have have the leader of the Dinobots be the smallest one!

And I’m also considering getting the next evolution in Scoria, which is Perfect Fusion Cesium. As far as I know, Perfect Fusion is a spin-off sister company of Fans Toys. PF took everything wrong with Scoria, went back to the drawing board, and produced another version of MP-style Slag called Cesium that fixes everything wrong with Scoria. I am tempted to buy Cesium. However, in robot mode he seems to big. In fact, he is even a smidge taller than Grinder. For that reason I am hesitant. At $139.99, Cesium is a bit cheaper than the Iron Dibots (usual MSRP is $199.99). I may get him. Or not.

Transform and Roll Out.
 

I have a lot of Transformers. I do play with them, and I try to be as careful as I can be when transforming them. But when you have as many as I do, you’re bound to break some. Occasionally the figures come broken (yes this has happened). Sometimes an inherent flaw in manufacturing or design lends the figure to breaking after only a few play.

Below are 10 of the figures from my collection where something has occurred to render them less than perfect. My heart breaks every time one of my Transformers breaks. Read on and see if you have mishandled any of these 10.
 

Brawl (Leader Class)
Series: Movie (2007)
Allegiance: Decepticon
Function: Ground Assault
Mode in Package: Robot
Known Redecos: Movie Deep Desert Brawl
Status: Returned to store; got replacement

The Figure:
Movie Leader Class Brawl is one of only few Leader Class figures I have from the entire Movie-verse. I highly recommend him. The robot mode is decent, but the tank mode is where this figure truly shines. He also has working lights and sounds, if that’s your thing.

The Incident:
First time I purchased this figure was from Toys R Us, and he was already broken out of the box. I documented this already, back in this post. There was a peg that came broken. It’s been more than 10 years now, so I don’t remember exactly which peg. But I think it was on the turret.

The Aftermath: I quickly returned Brawl to Toys R Us. I would have simply asked for a exchange, if they only had more of the figure. Since they didn’t, I asked for a refund and then bought it again on Amazon. And for cheaper too – looking up my old Amazon records, I re-purchased him for only $31.99! Can’t imagine getting a Leader Class figure for that price nowadays.
 

Samurai Prowl (Deluxe Class)
Series: Animated
Allegiance: Autobot
Function: Autobot Spy
Mode in Package: Motorcycle with Sidecar
Known Redecos: none
Status: Returned to store; no replacement

The Figure:
Samurai Prowl is one of the hardest figures to find from the Animated line. I was super thrilled when I found one on pure happenstance. He appeared on a TRU shelf when the TFA line of toys was officially over. I documented that purchase here and a review here.

The Incident:
I outlined how I damaged the toy in the review. Specifically, the connection between the motorcycle and the side car is broken. The whole thing happened in such a way that I didn’t even notice it when the breakage occurred. I have must broken it on the first transform from alt mode to robot mode, because I saw the breakage on the reverse transformation. I’m forced to think that connection must have been super brittle. However I haven’t seen any other documented cases of this, so it’s possible I was being too rough. Though that’s not like me at all – when it comes to my TFs I’m usually careful to a fault.

The Aftermath:
I wasn’t happy about the breakage at the time, and I don’t feel any better about it now. I returned the figure to TRU, because perhaps the TF OCD in me can’t stand to have broken figures in my collection. But like I said, this figure is hard to find. I only saw him one other time. It was at the dealer’s room at a BotCon. The dealer wanted $40 for it, and no way was I gonna pay that. Sad to say, I never saw the figure in store again. Checking on Amazon just now, the lowest price is around $100. In retrospect, maybe I should have just hung on to my broken Samurai Prowl, or spent the $40 at BotCon for another one.
 

Bumblebee (Deluxe Class)
Series: Animated
Allegiance: Autobot
Function: Autobot Speedster
Mode in Package: Car
Known Redecos: Elite Guard Bumblebee, Jetpack Bumblebee
Status: Damaged; got replacement

The Figure:
From one TFA figure we go to another. I got TFA Deluxe Bumblebee in a pack of 15 figures I bought used on Cragislist, something that I documented here. TFA figures as a whole don’t have the best construction. They often feel like cheap plastic cobbled together into a toy by ill-fitting ball joints. Bumblebee is a prime example of this. The alt mode cockpit pieces that form the back of the legs are connected by ball joints. One of them is too loose, and keeps coming off.

The Incident:
I tried to fix said loose joint by applying some nail polish to the socket. Unfortunately, I applied too much and now the ball won’t go in at all. So I guess you could say I broke this by trying to fix it.

The Aftermath:
I tried to buy another Bumblebee in store, but by then the Animated line was officially over. Online retailers were all charging a markup. Bumblebee is a mediocre figure at best, so I’m not paying markup for such a figure. Fortunately for me, I was able to get a Japanese version of this figure at a pretty good price, way less than whatever the MSRP was. That purchase was outlined here. The Japanese version is better anyway, with shiny chrome paint and slightly better construction. This is the figure that represents my Bumblebee in my TFA line. As for the “broken” Bumblebee, I keep him around for spare parts. He has come in handy, which brings me to my next entry…
 

Megatron (Voyager Class)
Series: Transformers United
Allegiance: Decepticon
Function: Decepticon Leader
Mode in Package: Robot
Known Redecos: Classics Megatron, Henkei Megatron
Status: Repaired

The Figure:
I am still not sure what exactly is Transformers United. It was a Japanese only line. As far as I can tell, Takara took a bunch of Henkei figures, repainted them, and released this United line. There was no US equivalent. Anyways, Classics Megatron was one of the first 6 figures produced in the Classics line. The line is significant in that it started an update of classic G1 characters in modern forms while still capturing the G1 spirit. As a figure, the design of Classics Megatron is questionable. He does transform into a gun, which all G1-ers love. But Classics Megatron fits the very definition of shell-former (think G1 Scourge). Also, his alt mode kinda looks like a futuristic Cybertron pistol at best, and a toy water gun at worst. The Classics colors also don’t help matters, and even I have to agree that the US version of the figure used some kid friendly colors that made Megatron look like a Nerf toy gun. And so I wanted a more G1 accurate version of this figure. I was at BotCon 2011, and saw a dealer selling the United version of this figure at a reasonable price. So I bought it.

The Incident:
I’m not in the habit of opening my toys at the convention. After I got home, I find that something is wrong with the transformation. I can’t get the waist to properly align correctly for alt mode. Upon closer inspection, I see that a part in the waist is installed backwards! The whole thing is assembled with a screw, so all you really had to do is unscrew the assembly, re-position the part, and re-screw. However, it took me sometime to figure all this out. And by the time I did, I totally mangled the head of the screw. Fortunately I got the screw out, but there was no way it could be used again.

The Aftermath:
In the last entry I mentioned I use TFA Bumblebee for spare parts, and he has a screw that kinda fits into United Megatron. I now use that screw to secure this part of Megatron’s waist. The part in question is only visible during transformation. The fit with Bumblebee’s screw is not perfect. Rotation of the part using this screw is quite loose. However, the loose rotation is only apparent during transformation. And the waist as a whole has other parts that lock it into place in both alt and robot modes. So I’m ok with this fix. I have made peace with the fact that my United Megatron is not perfect, but functional (que “I still function” from the G1 Movie).
 

Darksteel (Deluxe Class)
Series: Dark of the Moon
Allegiance: Decepticon
Function: ???
Mode in Package: Sports Car
Known Redecos: DotM Sideswipe
Status: Damaged; got replacement

The Figure:
Dark of the Moon Darksteel is not a character in the movie. I’m not sure if he has an appearance anywhere. Darksteel is another quick cash grab off an existing mold, in this case Sideswipe from the same movie. In all honesty, this mold is pretty cool. The redeco colors chosen for Darksteel is smashingly striking, and he does have a unique head mold that differentiate him from Sideswipe. I bought one when the figure was first released. I transformed him from alt mode to robot mode no problem.

The Incident:
Some months later I decided to transform him back to alt mode. It was late a night and I guess I was a bit too careless. Long story short, I bent one of the feet pieces the wrong way and broke it. I have transformed Sideswipe many times so I thought I knew the process, but I will admit that I don’t remember how TFs transform as well as I used to.

The Aftermath:
Some months after the first breakage, I went to shop at Kohls because they mailed me a $10 certificate, good for anything in the store. Most people don’t know this, but Kohls also has a toy section. Occasionally they will have Transformers. Anyways, on this particular trip, I find that they had Darksteel. They were already having a 10% off sale. And with the $10 certificate, the final price of Darksteel came to only $3.90. I documented that purchase here. To this day, I still have this 2nd copy of Darksteel mint in the package. I’ll probably keep this unopened. He’s not worth so much now, but maybe one day.
 

Optimus Prime (Voyager Class)
Series: Transformers Prime Beast Hunters
Allegiance: Autobot
Function: Autobot Leader
Mode in Package: Robot
Known Redecos: Beast Hunters Optimus Prime (with extra green armor)
Status: Attempting repairs; got replacements

The Figure:
You didn’t think I was gonna get through this list without having an Optimus Prime figure on here, did you? Hasbro makes so many Optimus figures that it would be weird not to break one if you collected as many TFs as I did. I really like Beast Hunters Optimus. The toy is a good size to play with. He’s got a fun and intuitive transformation, and the figure looks good in both modes. I’m not crazy about the head mold, and hardcore TFP fans love to point out that his sword in the show is blue, not green. Still, at less than $20, this is a terrific OP figure.

The Incident:
I have only ever broken one Optimus Prime figure, and it’s this one. It could be worse, like if I broke the MP-10. But like I said, BH Optimus is one of the better figures of the famous Autobot Leader, so I’m still a bit bothered by it. Also, this figure represents something significant in my personal life, as I have documented here. So it kinda pains me to see it less than perfect. What happened is I broke the sword while Optimus is holding it, so now the handle of the sword is stuck in Prime’s right fist. I felt the sword being stuck in the fist, yet I still tried to force it out. Not a good move. Though I’m sure it was a bad job with the tolerance that led to this. My buddy Gemini had the same problem. Only he was more patient and submerged the fist and sword in really hot water and pulled it out.

The Aftermath:
To compensate for this breakage, I went out and purchased more BH Optimus figures, documented in the same post. I got both the US and Japanese versions of this, so now I have two unopened BH Optimus Prime figures sitting in a closet. I’m glad I did, because they are now worth quite a bit. I still want to attempt a fix on my original figure though. I recently bought the 3rd party Blue Skybreaker Sword by Dr Wu that is way better than the sword that came with BH Optimus. Now I just need to get the broken sword handle out of Optimus’ right fist. If I can do that, I will consider this figure back in perfect condition. Maybe I’ll try Gemini’s hot water trick.
 

Bumblebee (Deluxe Class, part of TRU Exclusive 2-pack)
Series: Age of Extinction
Allegiance: Autobot
Function: ???
Mode in Package: Robot
Known Redecos: AoE Bumblebee, standard edition
Status: Damaged; no replacement

The Figure:
How many Deluxe Bumblebees did they make from the Movie-verse? Too many to count, that’s for sure. I got one Deluxe Bumblebee in modern Camaro form from each of the 5 movies. The one featured here is from the 4th movie: Age of Extinction. After a while, all these Bumblebees just kinda blend together. The later Bees became one giant yellow blur. I don’t remember anything special about this one, other than the two circular disc type weapons that he has. For AoE, I got the special TRU 2-pack edition. The package comes with the standard AoE Deluxe Bumblebee that’s painted a bit more orange, and a repaint of Generations Legend Bumblebee from the Thrilling 30 line. One of these days I should put together all my Deluxe Movie Bumblebees for a group photo.

The Incident:
One night when I was transforming AoE Bumblebee from robot to car, I broke off the this right shoulder piece. This piece becomes the front right area of the hood in alt mode. I don’t even know what happened exactly. The part just broke on me. I dunno, I might have forced something, or maybe the part was just weak. Movie toys usually don’t have the best construction to begin with.

The Aftermath:
I thought about buying another standard Deluxe AoE Bumblebee to replace this broken one. But my feelings about this figure is mediocre at best. I didn’t wanna pay MSRP, though I was never able to find another one at less than that. So chances are this figure will just remain broken, not getting replaced or repaired.
 

Bumblebee (Deluxe Class, part of Bumblebee vs Barricade First Encounter 2-pack)
Series: Movie (2007)
Allegiance: Autobot
Function: ???
Mode in Package: Robot
Known Redecos: Movie (2007) Bumblebee standard edition, Target Exclusive Evolution of Bumblebee 2-pack
Status: Damaged; no replacement

The Figure:
How many Bumblebees are we gonna have on this list? And why do I keep breaking them? This is the last one, I promise. This is the very first Deluxe Bumblebee released in the Movie-verse. This figure transforms into a classic Camaro, the car that Sam first owns for the first half of the original Movie (and still the best). All the initial Movie toys had this crazy gimmick called “Advanced Automorph Technology”, sometimes just Automorph for short. Basically, several parts of the figure will auto transform upon moving a single piece. This is usually done through spring-loaded action built into the figure. In the case of this classic Caramo Bumblebee figure, the hood will automatically fold down to form the chest upon doing something else (of which I don’t recall anymore). It sounds cool, but it really isn’t.

The Incident:
The problem with these kinds of physical gimmicks is that they’re prone to breakage, and that’s exactly what happened. Years after I owned this figure, I dug him out of a box in the closet. I usually keep my figures in alt mode. When I found him, I saw that the car’s front hood is folded down. I tried to fold it back up, but it won’t click into position anymore. This figure broke while it was in storage. Some plastic pieces broke off after years of holding Automorph spring pressure. I probably should have stored this guy in robot mode. Lesson learned.

The Aftermath:
I actually had another version of this figure as part of the Target Exclusive Evolution of Bumblebee 2-pack. I kept it new but then sold it later, before I found out about the breakage. I do kind of want another one of this Bumblebee, not because it’s a great figure, but for it’s significance as part of a toyline that crossed from animation into live action media. Not a priority though.
 

M-F-B
Series: N/A
Allegiance: Autobot
Function: N/A
Mode in Package: N/A
Known Redecos: None
Status: Damaged; no replacement

The Figure:
This isn’t technically a figure. This is a gun accessory called M-F-B by 3rd party MakeToys. Due to licensing reasons, they can’t call it what it is, which is My First Blaster. In the IDW line of TF comics, this is a weapon for smaller sized Autobots. Swerve is often seen holding the weapon. MakeToys made this accessory to go with their Swerve figure (called Trash-Talk).

The Incident:
I got this accessory in the hopes that it would fit the Generations Thrilling 30 version of Swerve. Turns out, it doesn’t. The handle for M-F-B is 3mm, while Swerve’s hands are for 5mm weapons. Also, I didn’t know this came as a model kit (or maybe I did, but then forgot). I’m terrible at building models. During assembly, I broke off one of the light green bulbs that go on top of the M-F-B. Total bummer.

The Aftermath:
The breakage is beyond repair. And since this actually doesn’t even fit Generations Swerve, and I don’t have Trash-Talk, there’s no point for me to hunt down another one. This M-F-B will stay broken.
 

Soar (Blue)
Series: N/A
Allegiance: Autobot
Function: Bombadier
Mode in Package: Robot
Known Redecos: Soar (Red), Soar (Red comic), Soar (Blue comic)
Status: Repaired

The Figure:
Soar by Fans Toys is an awesome homage to G1 Swoop. I have written about this figure already, so read all the details here. If you are collecting Masterpiece style figures and you need to round out your Dinobot collection, you need this figure.

The Incident:
Nothing was technically broken on my Soar. However, when I got the figure, it was missing the large vertical piece of the display stand that Soar sits on in dino mode. I couldn’t believe it! This is the largest piece in the package next to Soar itself. I love Fans Toys, but where was the QC on this?!

The Aftermath:
Capturedprey.com was gracious enough to hunt down a replacement piece of the stand for me. It took several months, but better late than never. I now have a fully completed Soar figure in perfect condition with all accessories intact. Thank you Capturedprey!
 

I do have more figures that are broken/damaged/missing parts, but these 10 will do for now. I’ll make another post when I have another 10. Hopefully that won’t occur. Though with the amount of Transformers I have, it’s only a matter of time.

What figures have you broken? Or come damaged or missing parts? Feel free to comment below.

Transform and Roll Out.
 

October has historically been a month filled with many TF purchases. That is not so in 2016. But there are some cool items this month, and one surprising trend that I didn’t notice before.

• Titans Return Powermaster Optimus Prime, amazon.com, $39.99

• Titans Return Apeface, Target, $4.99
• Titans Return Skytread, Target, $4.99

• Robots in Disguise Paralon, Toys R Us, $9.99

• Fans Toys Soar, capturedprey.com, $180

Like I said, October 2016 does not have a crazy TF purchase count, as was the case in 2012, 2014, and 2015. This October is more on par with 2013 with a modest number of TF purchases.

Let’s take a look first at Powermaster Optimus Prime! Growing up, I really wanted G1 Powermaster Optimus Prime. I know, the concept of a Powermaster is really lame. But all Powermaster figures were good toys, for G1 standards anyway. And back in the 80s, Hasbro was not in the habit of releasing 10 different Optimus Prime figures every year across all toylines and sizes. Believe it or not, Powermaster Optimus Prime was only the 2nd OP figure produced, after the original season 1 toy. It was already Season 5 when Powermasters rolled around, and us fans were all itching for a new figure of OP.

My cousin had G1 Powermaster OP. I played with the figure quite a bit. For G1 standards, this was an awesome figure. I tried to buy one back in the 80s, but didn’t have the money. Now nearly 30 years later, Hasbro is giving us a homage to the original Powermaster OP in the Titans Return line. In this case he’s really a Headmaster, but he’s still got his 80s Powermaster design and aesthetics.

The figure is a heavy retool of the wonderful Combiner Wars Ultra Magnus figure that I went into back in this post. Hasbro took that mold and reconfigured it to resemble G1 Powermaster Optimus Prime with modern stylings and updates. The result is quite nice, and I’m happy that Hasbro took the effort to give us true fans something to homage the Powermasters, even though the figure is not a ture Powermaster. The Titan Master (or Headmaster figure) transforms into Prime’s head in robot mode. The helmet of the head is part of Prime’s body, flipped out from the cab. We’ve seen this mechanism before on TR Galvatron.

Since this technically a repaint, I won’t comment too much more. But he is recommended. Below is a pic of the alt mode. Notice how similar the cab appears when compared with CW Ultra Magnus.

Next up are two Titan Masters figures. Hasbro makes a whole bunch of these. For this month I got Apeface and Skytread. Yes, these are small figures that transform to heads. And FYI, all heads are interchangeable for figures in the TR line. Meaning you can take the head for Blurr and stick it on Scourge, or any other combination you see fit. Why you would wanna do this is beyond me. And with these small Titan Master figures, you get extra heads to swap between figures to your heart’s content. I got Apeface because I liked the original G1 Horrocon (and I’m hoping Hasbor will give him a true modern update). Not sure why I bought Skytread. The small Titan Masters also have another alt mode, in addition to the robot mode and head mode. To this day I still have not opened Apeface and Skytread, but I did open some other ones (purchased in later months). These figures are mostly forgettable in opinion. Oh, in my TF count page, I specifically stated that I don’t count mini-figures, such as Targetmasters and Mini-Cons. So I’m not adding Titan Masters to the figure count either. I truly seem them more as accessories. But they will add to the purchase count, since I did have to buy them separately.

The only RiD purchase this month is Paralon. I dont’ even know who Paralon is, as my knowledge of Robots in Disguise is severely limited. I only bought him because I like the purple scorpion. Supposedly, this is a Toys R Us exclusive. And Paralon was released before Scorponok, a brown repaint of this figure. So this was another case where Hasbro gave a new mold to an unknown secondary character, and released the more famous character later. However, when I saw Paralon, Scorponok was already on the shelve too. I chose Paralon anyway because I liked the purple, and honestly, I don’t much care for Scorponok as a character. Anyways, the toy itself is just ok. Like I said, a giant purple scorpion is very unique. Transformation is kind of unorthodox too. The shoulder mechanism requires that you take parts off, but the part never really completely comes off as it still dangles on the arm. So does this count as parts-forming? Who knows. Get Paralon or Scorponok if you’re partial to either character. Most fans could probably skip these two. They’re not bad figures, but they don’t have much going for them either.

Last but not least… ladies and gentlemen… I give you, Soar! That’s right folks! This month we have yet another outstanding 3P Dinobot from Fans Toys. And this time it is our favorite flyer of the group, Swoop! For trademark reasons, FT can’t call this figure Swoop, so they went with Soar. Gotta give them credit from coming up with these creative names.

Soar is packaged in robot mode, like all the other FT Dinos so far. Right upon getting this guy out of the box, the first thing you will notice is that he weighs quite a bit. I think he’s actually heavier than Scoria or Sever. Size wise, he’s smaller than these 2 when you don’t count the wings, so FT packed a lot of heft into the core frame of the figure. This is already a plus in my book.

The robot mode is a sight to behold. I went with the cartoon accurate blue version (FT also produced a G1 toy accurate red version, and I had G1 Swoop as a kid, all broken today). Check out the pic below. It’s like Swoop stepped straight out of the show!

“Me Swoop no see nothing.”

Seriously, this is so cartoon accurate that I can’t gush enough. Everything from the colors to the proportions, it’s like FT looked very carefully at every single one of Swoop’s show appearance and faithfully constructed a figure out of what they saw. Construction of this figure is absolutely superb. All joints are of the ratchet variety, and every one of them is tight enough to support the weight of this heavy figure. Soar is capable of some nice poses. I had him in several action poses, but unfortunately I didn’t take any pics. Take my word for it. If dynamic posing is your thing, Soar will not let you down.

Soar comes with the two iconic G1 wing missiles, as you can see in the pic. Unfortunately they do not fire. He also comes with his sword, which looks just like what he had with the G1 toy. The sword is attached to his back in the pic above. LED lights are featured in the sword (batteries are not included, however). I can’t remember if I have ever seen Swoop use this sword in the cartoon. All these weapons can be held in his hand, or pegged where they are in the pic in robot mode.

Transformation to pterodactyl is fairly simple. Soar is probably the easiest to transform out of all the FT Dinos so far. The overall transforming paradigm is exactly what it was in G1: bird head and beak flip up from the chest, arms and chest collapse toward the middle, and legs fold up to the back of the bird. Obviously this is all updated with modern mechanical engineering. G1 purists should have nothing to complain about in the design of transformation. Check out the pterodactyl mode below.

This dino bird is absolutely amazing! I took a quick measure of the wingspan, and in the above configuration, the wingspan is close to 18 inches! Soar looks fantastic flying above all your other MPs in this mode. The wings hold their position fairly well. On my figure, one side of the wings is nice and tight, while the other side can be argued to be a bit loose. But it still holds up well in alt mode and it does not droop down, so it works well enough for me. Soar comes with an extra set of wings. The default attached wings are more chrome, while the extra wings are more metallic. I did not try the extra wings yet. Fans Toys have thought of everything. They really love you.

In alt mode, the missiles go where you expect them to go. I detect no storage location for the sword in alt mode, but that’s a minor gripe. The beak opens and closes. The beak joint is tight and I expect no less. The alt mode comes together nicely as one cohesive whole. All parts are tabbed into place where they should be. No dangling parts whatsoever. This is the Dinobot pterodactyl that the Autobots deserve.

Last but not least, Soar comes with this awesome display stand for the figure in alt mode. You can see it in the pic above. This stand is large and robust, with enough support for this heavy figure without any worries. Oh, my figure was missing the vertical piece of the display stand when it was first shipped to me. Props to capturedprey.com for contacting Fans Toys and shipping me the missing part. I have complete faith in this retailer and I will use them more in the future. Minor issues with Fans Toys figures are not uncommon, however. I have been lucky thus far, until Soar. Other fans have complained of missing weapons, missing accessories, non-working LED weapons, batteries that should have been included but are not, etc. These periphery issues seem to plague Fans Toy’s track record. So open your FT figures as soon as you get them. Most respectable retailers will work to make it right within the proper time frame.

I give Soar the highest possible recommendation. If you want a MP Swoop in your collection, look no further than Soar. Get one before they all soar off the shelf (bad pun intended).

The surprising trend that I mentioned at the top of this post is the trend of when I buy the FT dinos. Scoria was purchased in October of 2014, and Sever October of 2015. And now Soar in October of 2016. So it looks like I buy one FT dino every year, and at October. I doubt this trend will last though. I have the 2nd release of Stomp (Sludge) pre-ordered, and he’s set to arrive June or July of 2017. But who knows… maybe he will get delayed til October. I hope not. I heard excellent things about Stomp.

More TFs are to come in the months that will end 2016. Until then, Transform and Roll Out.

 

My fellow TransFans, June of 2016 is a historic month! For the first time in the history of this blog, I have acquired more 3rd party items than official Takara/Hasbro items! I think something like this phenomenon was brewing for a long time now. And it finally happened. I’ll comment more on this later, but for now let’s take a look at the figs for the month.

• Combiner Wars Groove, bbts.com, $24.99

• ToyWorld Iron Dreg, bbts.com, $91.99

• Fans Toys Grenadier, bbts.com, $82.99

• Spark Toys Alpha Pack, gift

• Warbotron Heavy Noisy, gift

First let’s look at the lone offical Hasbro purchase and get that out of the way. Combiner Wars deluxe Protectobot Groove is a shared exclusive between Amazon and some of the bigger online TF retailers. This figure is not to be confused with the legend size Groove released in 2015, which is available in mass retail. I have wrote about this before, and it’s worth stating again. For the Protectobots, Hasbro gave us deluxe Rook instead of deluxe Groove. I can only guess that this is a cheap ploy to sell more figures. Those of us that are hardcore G1 had to buy deluxe Groove the hard way. Boo Hasbro.

Deluxe Groove on its own is not a bad figure. Both modes look solid, and at first glance there’s not much to complain about. I’m fairly certain he’s a new unique mold, but he feels awfully similar to the other CW limb components. The toy itself feels quite cheap, but all CW deluxe figs share that flaw. The only real reason to get this fig is for hardcore G1-ers to complete the Protectobots with the right characters in the right scale. Below is a pic of CW Defensor formed in the proper G1 configuration.

Now onto the good stuff. First on the agenda is ToyWorld Iron Dreg, their tribute to Dinobot Slag. I believe this figure was bought back in the March of 2016. At the time, I already had Roar (Snarl) and Corelock (Grimlock), and I was so thoroughly impressed with those two that I vowed to complete the TW Dino set. So when I saw Iron Dreg at a discount in March, its purchase was a no-brainer. He wasn’t shipped and received til this month, because I wanted to ship the stack out along with Grenadier and Groove.

As of this writing now in February of 2017, I have 4 of these Dinos, the only missing one being Spear (Swoop). Though I gotta say, out of these 4, Iron Dreg is the weakest figure. I love the dino mode. It is a good modern update of Slag as a powerful metallic triceratops. The transformation and robot mode is where this figure falls a bit short in my opinion. The overall transformation schema is very close to how Slag transformed in the G1 toy. The only noticeable difference is having the rear dino legs fold inside into the lower legs in robot mode, a common motif among all modern interpretations of Dinobots. There are other minor differences, but nothing that really sticks out as a significant mechanical enhancement to the figure. Hardcore G1-ers would probably appreciate this close resemblance to what came before and see this as a plus. Normally I would wholeheartedly agree, but in the case of Iron Dreg, I feel there’s not enough updated from the G1 toy. As a CHUG update, I feel like a modern figure needs to move the toy forward in terms of engineering. It’s one thing to update aesthetics (something that fans passionately debate over), but it’s quite another to update mechanics. Everything feels too familiar. Don’t get me wrong, Iron Dreg is still a decent update of how Slag would be today. But when compared to ToyWorld’s efforts on Corelock, Roar, and Muddy (Sludge), Iron Dreg feels lazy. I guess it’s no accident that Iron Dreg was the 2nd to the last figure released in this team of 5. While we’re on that note, Spear is the last TW Dinobot released. I have read reviews that Spear is not that great of a figure, so I am debating if I want to spend around $100 to buy a bad figure, just to complete the set. First world problems – woe is me 🙁

As for Iron Dreg’s robot mode, I got the same gripe as its engineering – it feels too similar to G1. Again, Iron Dreg is still leaps and bounds superior to the G1 figure. It’s just that there’s nothing that wows me about this robot mode. All the updates that you expect to be there is there, but that’s all. TW most definitely did not go above and beyond with Iron Dreg, and the result feels like a minimally done update to Slag by 2016 standards.

I know I sound really harsh here, but I still recommend Iron Dreg if your aim is to complete the TW Dinobot set. As part of a team, he is solid enough of a figure that he warrants a purchase to occupy a space on your shelf. But as a standalone figure, I would say pass. There are other Dinos from TW that are way better. If you only wanted to get one Dinobot, you would probably get Grimlock anyway. Below is a pic of Iron Dreg in robot form.

Here is a link to the 4 TW Dinos I have thus far, in their dino modes. I love how the team looks together.

Let’s now take a look at a character that’s very dear to me: Bombshell. I have outlined how Bombshell is my very first official Transformer. And for that reason, I try to buy all the modern updates to the character. I have one set of G1 reissues, the FansProject update (as Stormbomb), and the recent Combiner Wars legend figure. I even have Hardshell, a spiritual update of the character in the TF Prime Beast Hunters line.

By the middle of 2016, many third parties have attempted MP interpretations of everyone’s favorite robotic insect pests. I read and watched some reviews, and the general consensus is that Fans Toys make the best MP Insecticons. And since Bombshell is my favorite of the 3, I bought Fans Toys Grenadier. I know many fans prefer the grey chest toon version of this figure. But I elected for the toy version with the purple chest, because that’s how the G1 toy was. I played with this figure over and over as a kid, and transformed him countless number of times that today this figure is in fairly poor condition. The G1 figure had a purple chest, and that’s what I remember, so I went for purple in Grenadier. And honestly, I didn’t even notice that Bombshell had a grey chest in the cartoon until very recently, when third parties started doing their MP Insecticons.

FT Grenadier comes packaged in robot mode. The first thing that you will notice about this figure upon taking it out of the box is that it’s got some decent heft to it! Seriously, Grenadier weighs more than most figures I own, and that’s saying a lot! Below is a pic. This figure is a wonderful representation of Bombshell in MP scale.

FT was smart enough to mold a design on Grenadier’s chest that’s a perfect fit for third party Decepticon stickers. Notice on my Grenadier I have a faction symbol on his chest, using stickers by Ocean Designs that I bought sometime in 2015. I love the look of Grenadier in robot mode. Appearance wise, he’s a perfect homage to Bombshell, and in my opinion he strikes the perfect balance between how he appears in the cartoon and how he should appear as a toy figure. He scales nicely with other MPs on the shelf. Grenadier has got some decent articulation, capable of some dynamic poses if you want to re-enact scenes of Bombshell in action.

Transformation to bug mode can be a mediocre challenge, but not for the reasons you think. As a rule, I think transforming plastic pieces is usually easier than transforming metal pieces. Transforming Grenadier, it feels like the whole figure is metal. I know that’s not true, but the figure has a fair amount of die-cast, and the plastic used is super high quality. While I applaud the materials used, transforming the figure becomes difficult. There’s very little wiggle room for error when such hard pieces on the figure are used, and thus the process becomes unforgiving. The tight joints also do not lend to an easy transformation process. However, all this is balanced out by the transformation mechanism being on the simple side, resulting in a figure of average difficulty on the challenge scale. In a nut shell, not a whole lot of steps in the transformation, and it’s obvious what the next steps should be. But performing the steps could take some work.

In beetle mode, Grenadier does not disappoint. He’s got the same weighty feel and robust construction that he has in robot mode. The appearance of the bug is tremendously faithful to his show likeness. Fans Toys even included a set of alternate legs for the bug mode. I’m not sure what they are for entirely. It’s possible that, in some episodes, Bombshell had legs that looked more like the alternate legs. I should have took a pic of Grenadier alone in beetle mode. Scroll down to the bottom of this post of Grenadier in alt mode in a group shot.

I highly recommend Grenadier. Here is a pic of Grenadier in robot mode with some of his Decepticon cohorts.

The next two figures are gifts from my wife. I have wishlists set up on my favorite TF retail sites, and she just looks at these when she buys me TFs as gifts. It’s always kind of a surprise which figs she would choose.

The first of these is from a new company called Spark Toys. They decided to do their take on a War Within Optimus Prime. Back in 2006, when it was only 2 years after I started collecting TFs again, Hasbro partnered with Galoob to release the Titanium line. The very first figure released in this line is a War Within Optimus Prime. In all fairness, that figure wasn’t bad. I liked both modes of that figure. The transformation, while simple, captured how a Optimus Prime figure should transform. The paint applications of the figure was solid. Where that figure fell apart is in the construction. The selling feature of the Titanium line is that they include die-cast parts. But they say die-cast construction is a lost art, and in the case of Titanium figures, it’s very true. Titanium OP had some of the worst joints imaginable in a TF. They could not support the weight of the die-cast pieces. The result is a figure that can’t hold any kind of pose, and picking up the figure yields a floppy mess of a Transformer.

Well, that was then. 10 years later in 2016, Spark Toys makes their attempt to do justice to War Within Optimus Prime, in MP scale no less. And since they are third party, the name they are calling OP is Alpha Pack. I’m glad to report that Spark Toys’ efforts is a success! The first thing you will notice about getting this guy out of the box is the spectacular paint job! I think of all the TFs that I have acquired, this guy may have the best paint job ever. The reds, blues, and silvers have this shiny and glossy metallic property to its appearance, and it’s great to see that the application is uniform across the figure. Front head lights and rear tail lights are all accented in bright yellow paint. The tires a made of rubber, and in vehicle mode, Alpha Pack rolls well on a flat surface.

Alpha Pack comes with 3 accessories: the famous OP rifle, an axe (not the energon variety), and their take on the Autobot Matrix of Leadership. In alt mode, Alpha Pack can carry the rifle in the top rear area of the truck. To do this, there is a nice little attachment handle that flips out of the rifle, and this can be hidden when Alpha Pack is using the rifle in robot mode. Very very cool. The Matrix can be comfortably stored in the front grill area (which becomes the chest in robot mode). But there is no room for the axe in alt mode.

Below are some pics of the alt mode of Alpha Pack. I love the look of Alpha Pack in this mode – he looks like he jumped straight out of the comics. I applied an Ocean Designs decal to him as well.

Below is a pic of Alpha Pack next to the awesome DX9 Carry (which I will go into next month).

Transformation to robot mode is not difficult at all. I’m going by all memory here, but in terms of the transformation paradigm and overall number of steps, it feels like the Alpha Pack is only slightly upgraded from the Titanium figure. The mechanics of how that’s achieved, however, is a vast improvement. Alpha Pack does not have any die-cast pieces as far as I can tell, but in opinion that’s a good thing. It makes for a more playable figure. And as far as transformation and poseability, not having die-cast poses less issues in these areas. Alpha Pack has nice joints to support the figure, but not having die-cast means it doesn’t need extra joint reinforcement to begin with.

Alpha Pack looks great in robot mode. The figure feels true to his War Within appearance. Look at the top banner of this blog for a pic of War Within OP if you are not familiar with that incarnation. The outstanding paint job shines in this mode as well. Some fans have mentioned that he looks a tad too bulky in robot mode. When standing next to MP-10, it’s hard to argue against that complaint. But personally, I kind of dig this bulky look. This is how a lot of the comic book artists choose to stylize Optimus Prime in his Cybertron days, and I am glad to see Spark Toys hold true to this design. Below is a pic of Alpha Pack next to the US Version of MP-10.

One gripe I have about Alpha Pack is the poseability. Because he is a bit on the bulky side, his range of poses are more limited. This is something to note if you are one of those collectors that love to display your figures in dynamic poses. But despite this weakness, I still highly recommend Alpha Pack. This figure has way more pluses than minuses, and if you are a fan of War Within or any of the modern G1 Transformer origin stories of their era prior to Earth, you should pick up this figure.

The other figure that I got as a gift from my wife this month is Heavy Noisy, which is Warbotron’s rendition of Brawl. This is the 2nd time that my wife has chosen to get me something from the Warbotron Combaticons (the first being Whirlwind, or Vortex). My wife knows nothing about Transformers. She picks out the figures on my wishlist based on appearance alone. She has always joked that she identifies more with the Decepticons, so perhaps she knows more than she’s letting on.

Heavy Noisy is the 4th figure I have in the Warbotron Combaticon line. I gotta say though, this one feels like the weakest out of the four so far. He’s still a decent figure, but something about him just don’t feel quite up to par with the other team members. Both modes are satisfactory. Transforming the arms into tank mode is a bit of a pain because they are so tight, and it’s even worse when you try to get them back to robot mode. I’m also not thrilled about the tank turret becoming a shield. It feels too much like puzzle forming in my book. But Heavy Noisy is not a bad figure by any means. He is solid enough to earn a place in your collection, and you still need him to form Bruticus. I’ll reserve my final thoughts for when I have all 5 members of Warbotron. As of this writing, I have purchased Air Burst (Blast Off). I should have him in hand soon.

Below I have a pic of all the 3rd party figures acquired this month in a group shot.

It’s quite a sight to see how far 3rd party products have come. I still remember my very first 3rd party figure, which was Defender by FansProject. Third parties have really stepped up their game since then. Most of the figures produced recently seem to be in really high quality. They rival anything that Hasbro/Takara has produced in the MP line, and blows away anything that you would find in retail store shelves. Third party products are not getting any cheaper, though. So many companies are getting into this game that I can’t count them anymore. Very often, multiple companies will produce their version of a particular character. As fans, I am glad I have so many options on something that Hasbro will not produce, but I also feel handicapped by all these options. Many studies have been done on the paradox of choice; that too many options can actually make a person unhappy. As for third party TFs, is too much of it presented to the buyer that decision paralysis is now an issue? I was gonna sum up my thoughts on this topic in a short paragraph here, but now I think this may deserve it’s own post.

June 2016 was a great month. So many great figures, by so many different companies. More to come soon… Transform and Roll Out.

June of 2015 is Robots in Disguise month! Check out all the RiD figs below. There are some third party items here too.

• Robots in Disguise Optimus Prime, Walmart, $14.97

• Robots in Disguise Drift, amazon.com, $12.80

• Robots in Disguise Jazz, Target, $14.99

• Perfect Effect Perfect Combiner PC-02 Upgrade Set, tfsource.com, $32.99

• Before & After Alpha Launcher for MP-18 Bluestreak, tfsource.com, $14.95

• ToyWorld Grimshell (Corelock), tfsource.com, $149.95

Before this month, I only bought one RiD figure. That was Grimlock from back in January. I was not terribly impressed with RiD Grimlock. So you might be wondering why I bought all these RiD figs here. Truth be told, I only bought them because there wasn’t a whole lot of other TFs on the shelves. Combiner Wars was in a slight retail pause, and my 3rd party orders haven’t come in yet. But I’m glad I got the RiD figs here. Drift is a great one. If you can only get one RiD fig here, get Drift. Both modes are good, transformation is fun, and build construction of the toy is solid. I love his twin swords. Jazz is a nice one too. I don’t know if I’m feeling that spear/gun weapon, but the figure itself is a worthy addition to Jazz. The Optimus Prime figure is not great, but not bad. There’s some fun stuff going on here, but overall he’s too simple and too small. It’s kind of the same gripes that I have for Grimlock. Though Grimlock is getting (or has gotten) a bigger, beefier version for the collectors. I hope OP gets the same treatment.

Now onto those 3rd party accessories. Perfect Combiner PC-02 Upgrade Set is meant to enhance Combiner Wars Menasor. I got some picks from back in this post. Most fans seem to be gushing over these sets, which is why I got them. I don’t know. I think they’re ok, but in my opinion they don’t add that much to the combined form. Maybe I’m expecting too much. Alpha Launcher for MP-18 Bluestreak by Before & After is an excellent upgrade! I got one pic below that shows it off. I like how the MP toy designers incorporated launchers as part of the transformation. But they are more reflective of Bluestreak’s cartoon look, and they look a tad small. With these Alpha Launchers, Bluestreak now has the firepower to be the true gunner that he’s meant to be. This upgrade set also comes with decals for the MP that are much like the decals of the original G1 toy. I did’t put them on. But know that it’s an option for those that like their figures all decked out with decals.

I have written about ToyWorld Grimlock several times already. He’s officially listed as Grimshell on the box, but sometimes he is listed as Corelock on store sites. Anyway, I have raved on and on about this figure here and here. So I won’t repeat my G1 fanboy praises yet again. Just go read those.

Below is a group photo of the bunch (minus the upgrade set for Menasor).

Transform and Roll Out.

Behold my fellow TransFans… ToyWorld Dinobots!!! This set looks so good together, I had to make a post on this topic alone. Focus your optics on the pic below.

For those that don’t know, this set of Dinobots is made by 3rd party ToyWorld. Obviously they have to use their own names for the characters since they have no rights to any Hasbro properties. None of them come with any Autobot symbols for the same reason. I bought some TF faction stickers last year, and I applied one to each figure with the exception of Grimlock. The faction stickers are applied to the area that would become the chest in robot mode, so you don’t really see them in this pic (except for Slag, if you look carefully). Here is the name mapping for each character to figure:

• Grimlock – Grimshell (or Corelock)
• Slag – Iron Dreg
• Sludge – Muddy
• Snarl – Roar

I assembled this set together when I received Sludge last week. I actually bought Sludge months ago, back in March. TF Source had a weekend sale so I was able to snag Sludge at $80. But I had nothing else to ship with Sludge, til now. Slag I received about a month ago. Much like Sludge, BBTS had a daily sale on Slag for a tad over $90, and so I snagged him quick. I already kind of went into Grimlock and Snarl. And so here’s the four of them together. I know what you’re thinking… where’s Swoop?! Don’t worry TransFans, I will get him. I’ll take a another pic with the full force when I do.

From a transformation perspective, I like Sludge the best. His transformation is fun and intuitive, and at the same time complex enough to satisfy the mature TransFan without being overly complicated or frustrating. Snarl is good too, but I don’t like how his tail keeps coming off during transformation. It makes me feel like he’s puzzle forming. It is possible to have it stay on, but you would have to be super delicate. Slag is a little too simple transformation wise when going from Dino to Robot. Going back, there is something that’s kinda frustrating with the legs, to have it positioned exactly so it would align with the back. Grimlock has a cool transformation, but in my opinion his T-Rex mode is so much better than the robot mode, so most of the time I just don’t bother. Don’t get me wrong, I think his robot mode is solid. But the T-Rex kicks ass!

I might also take a pic of them all in robot mode. And maybe even the combined mode after I get Swoop! But that’s for another post.

Me Grimlock say… Dinobots kick butt!

Me Grimlock say too… Transform and Roll Out!

Today I’m going to feature some figures on the top layer of my Detolf shelf. I have assembled a collection of some of my favorite Season 1 Autobots from CHUG. For those of you that don’t know, CHUG is an acronym for Classics Henkei Universe Generations. These are all terms that Hasbro or Takara has used to label various Transformers lines that represent a modern update of classic G1 characters. I have also seen some fans refer to them collectively as G3, since it follows G1 and G2. Whatever you call it, they are all modern toy interpretation of Generation 1, though not necessarily in their exact G1 forms.

All these characters appeared starting in Season 1 of Transformers Generation 1.

There are a total of 6 figures here. I will describe each of them in depth, in the order of their release.

Optimus Prime, Classics, 2006
This Optimus Prime figure is part of the 6 initial figures that kicked off the Classics line back in 2006. It’s hard to imagine if Hasbro knew what kind of trend they were about to set in motion when these 6 figures took physical form. Hasbro tapped into something that was part of every action figure collector that grew up in the 80s with the launching of this Classics line. Anyway, this Optimus figure was one of only 2 Voyager size figures in the initial 6 (the other was Megatron, duh). To this day, this figure remains one of my favorite Optimus figures of all time. He looks good in both modes, the transformation was clever yet familiar for its time, and his overall appearance evokes instant G1 nostalgia while giving the character some mid-2000s updates. 9 years later as I write this, I still play with this figure from time to time. In the pics above he is holding his iconic G1 rifle that came as part of the BTS-03 G1 Prime Matrix of Leadership Upgrade Set by BTS Toys. I also have the FansProject G3 Trailer that can be added to this figure, but that was not featured anywhere on this blog. Maybe I should.

Sideswipe, Universe, 2008
For whatever reason, people love Sideswipe. I read a caption somewhere that stated he’s never done anything important, but he’s such a fan favorite. Maybe it’s because the G1 toy was such a good piece for its time. Or maybe it’s because he’s a fun loving character who does his job well without taking himself too seriously. Or maybe people just love his sexy Lamborghini alt mode. Whatever the reason, I gotta admit he’s also one of my all-time favorites. When the Universe toy came out back in 2008, I was beyond thrilled. And the toy did not disappoint. I knew Hasbro had no official licensing for Lamborghini, but I was pleased with the fictional alt mode they came up with to represent what would be a Lambo. The transformation of the figure is fun and satisfying. In the pics above, Sideswipe is using is G1 rifle and shoulder mounted missile launcher from the Heroic Duo Custom Kit Version 2.0 by Beelzeboss. I highly recommend this upgrade kit.

Jazz, Reveal the Shield, 2010
Jazz is another one of my all time favorites. Do a quick search for Jazz on this blog, and you will see there are many, many entries. Jazz is a character that has appeared in almost every TF continuity. In G1, Jazz completes missions with so much style and pizzazz, it’d be criminal if he was any cooler. This Jazz figure more than does justice to the Special Operations agent and Optimus Prime’s right hand man. I did a in depth review of the figure in this post, so I won’t do it again here.

Bumblebee, Age of Extinction, 2014
Bumblebee is a character that needs no introduction. He may be the most famous TF of all time, even surpassing Optimus Prime. Hasbro released so many CHUG Bumblebees over the years that I could have used many others for this lineup, but I used this one because I think he scales the best. And no, this is not the Generations Thrilling 30 Bumblebee. Though this is a exact repaint of the same mold, released as a Toys R Us exclusive 2-pack along with deluxe Age of Extinction Bumblebee (the modern Camero). That’s why I labeled it Age of Extinction above. This Bumblebee is a fun little figure. And I think that captures the spirit of Bumblebee. In the movie lines, Hasbro released way too many Bumblebees that are way too large and way too complicated. To me that is never Bumblebee.

Roar (aka Snarl), ToyWorld, 2014
Not counting the upgrade kits, Snarl is the only 3rd party figure on here. Technically he’s Roar, ToyWorld’s homage to Snarl. This figure is a gift to me from my fiancee. For a long time now, I was wondering why no third parties would do CHUG size Dinobots. Hasbro did do a deluxe size Grimlock, but that figure is not well received by most hardcore TransFans. No other CHUG Dinobots were made by Hasbro. Dinobots are forever fan favorites, so it seemed like a natural fit for third parties to come in and do what Hasbro will not. So it was a real mystery to me why no third party would attempt this. And believe me, there are no shortage of third party these days. But then all of a sudden, starting I think in early 2014, a whole bunch of third party companies announced that they will be making Dinobots. Off the top of my head, I can think of 4 CHUG size lineups (ToyWorld, FansProject, GCreation, Planet X) and 3 Masterpiece size lineups (FansToys, Bullsfire, GigaPower). Anyway I’m getting off topic. I love Dinobots, and I love ToyWorld products, so I had to have their Snarl. The toy comes in dino mode. Transformation to robot mode is well engineered and fun. I love how the hind dino legs can fold into the robot legs. This appears to be the trend with all the modern Dinobots. Construction of the figure is solid. Both modes look very G1 accurate. This is a third party figure I highly recommend. I already have TW Corelock (aka Grimlock) on preorder.

Jetfire, Generations Thrilling 30, 2014
Jetfire is a character with a rather complicated history in the world of Transformers. Originally based on the Takatoku toy of Macross VF-1 fame, Hasbro got the right to the merchandise of this toy and created the character of Jetfire. I’m not sure why he is called Skyfire in the G1 cartoons, or why the show designers decided to give him a somewhat different appearance from the toy. Whatever the reason, Jetfire became an instant fan favorite. As one of the very few Autobots that could fly in Season 1 of G1, the Jetfire toy was sought after by nearly every kid who was interested in Transformers at the time. Very early in the Classics line, Hasbro came out with a Voyager class toy that resembled the G1 cartoon look for Jetfire. That is an excellent figure, but in 2014 Hasbro released a Leader class figure that is even better! This Jetifire is a must-own. Both modes look sweet, and he looks like he jumped straight out of the show. Transformation is fun without being overly complicated. Some might even consider him too simple for his size, but I can easily overlook it due to the sheer fun factor. His massive size scales nicely with other CHUG figures. Jetfire gets the vote for figure of the year from many fans, and it’s certainly very hard to make a case against it. As of this writing, Jetifre can be found in store and online at MSRP (sometimes below MSRP). Make sure you pick up yours while you can!

Autobots… Transform and roll out!

I’m finally back to cataloging my purchases for each month. This activity has been on hiatus for some time, and I’m way behind. June 2014 was a busy month in terms of TFs purchased, partially because of BotCon 2014 that took place this month. The convention was in Pasadena, California, and I always go if the event is at this location. I may make a separate post for my BotCon 2014 pics. But that’s getting off topic. Time to showcase the figures for this month. This is a long list. Prepare yourselves.

• Generations Thrilling 30 Swerve and Flanker, Target, $9.49

• Age of Extinction Drift, Walmart, $9.97

• Age of Extinction Hound, Toys R Us, $24.99

• Age of Extinction Slash, Toys R Us, $7.49

• Age of Extinction Strafe, Walmart, $9.97

• Transformers Prime Beast Hunters Bulkhead and Prowl, Walmart, $12

• Transformers Prime Dark Energon Wheeljack, BBTS (at BotCon), $15

• BotCon Exclusive Depth Charge and Rampage, Hasbro (at BotCon), $62.71

• MakeToys Mobine MB01-SP2 Missile Launcher Marine Type, CapturedPrey.com, $48

• Mastermind Creations Hexatron, CapturedPrey.com, $130

• MakeToys Mobine Paladin/Chaos, CapturedPrey.com, $79

• Renderform Gold Scout Upgrade Kit, CapturedPrey.com, $25

There are a lot of TFs here. 12 purchases in all, for a total of 13 figures and 2 upgrade kits.

Generations Swerve and Flanker were the first finds of the month. These are cool little figs. I don’t care much about the Mini-Con (Flanker), but Swerve is a real prize. He’s fun to play with. I like both his robot mode and alt mode. There’s a redeco of this fig out there as Gears, though as of this writing he’s kinda hard to find. I plan to get one.

Next up are all the Age of Extinction figs. As a whole, I think the AoE figs are rather disappointing. The Dinobots pictured here (Slash and Strafe) certainly attest to that assertion. I’m not particularly impressed with either of these and I’m looking to sell them. However, Drift and Hound are quality figures. Drift is probably my favorite of the deluxe figs from AoE. Hound is a solid voyager figure with weapons to spare. I have kind of reviewed them back in this post, so I won’t do it again. Just know that Drift and Hound are both solid additions to your AoE line.

All remaining figures featured in this post are either bought or picked up at BotCon. First up are TF Prime Beast Hunters Bulkhead and Prowl. Gemini bought these for me a few months before BotCon, but I did not have a chance to meet up with him til this event. He found this pair at his Walmart for $12 on clearance. I was really only interested in Prowl as I already have Bulkhead. At the time, Prowl was really hard to find (and he is still kinda is as of this writing). So I did not mind spending $12 for both figs.

At the BBTS booth I picked up Dark Energon Wheeljack. This is a BBTS exclusive. I could have gotten this from their website (for cheaper), but at the time I had nothing else I needed to buy from BBTS and I was already there so I went for it. Normally I don’t like buying repaints for the same character, but I really like this Wheeljack mold, and I love the transparent blue, so I splurged.

At every BotCon, Hasbro will sell some of their exclusive figs at their booth where they handle registration for Transformers Collector’s Club. This year was no exception. I mentioned back in the BotCon 2011 post that this was how I got the very rare Reveal the Shield Windcharger. In 2014, one of their exclusive figs caught my eye… Depth Charge! From Beast Wars, Depth Charge is one of my favorite characters. He’s a good guy, but at the same time a total bad-ass! Plus I love this mold. Terradive, the original character of this mold, is probably my favorite deluxe figure from Revenge of the Fallen. They repainted this awesome mold once for Space Case (from Dark of the Moon). I guess one could argue if using this mold for Depth Charge is fitting, but I don’t care. Depth Charge was about $20 if you have a TFCC membership, but without one the figure was about $40. So I decided to get the TFCC membership (about $42), which also comes with an incentive figure of Rampage. Hasbro chose to repaint TF Prime deluxe Megatron for Rampage. So for about $62 total, I got the TFCC membership, and two figures. Depth Charge and Rampage are rivals and nemesis of each other in Beast Wars, so it’s awesome having the both of them. To this day I still have not opened these 2. But I already know the Depth Charge fig will be remarkable. I know nothing of the TF Prime deluxe Megatron fig, so it remains to be seen how I will like Rampage.

And now for the figures I got from CapturedPrey. I bought all these earlier, some of them as early as the beginning of 2013. However, they don’t ship anything until your entire order comes in, at least that’s how it was at the time. I don’t know if they have developed some kind of stacking mechanism since then, like TF Source. Anyway, I still had several items outstanding at the time of BotCon, but I really wanted the figures that had already arrived. So I emailed CP and told them I like to pick them up at the booth. They were very accommodating. I picked up the four 3rd party items pictured above.

The Mobine Marine Missile Launcher kit by MakeToys is pure awesomeness! These kits really improve upon the crap that are PCCs. I featured this kit a little in this post. I tried this kit with Heavytread, Steelshot, and Undertow. Out of these 3, Heavytread looks the best, but it’s not bad with the other 2. My only regret is I should have also got the Jungle version. Apparently there were a shortage of the Jungle version, and most of the stock went to BBTS. MakeToys Mobine Paladin/Chaos is a similar toy, but with another smaller figure added in that will combine with the armor. This figure is a tribute to The Fallen (from the comics, not Revenge of the Fallen). The armor portion is more or less the same as the Mobine kits, but having a smaller figure combine with the armor to form The Fallen is an excellent idea. A pic of this figure appears here. This is way better than the piece of crap that Galoob tried to do with The Fallen that was featured in the Titanium line. I highly recommend the Mobine line from MakeToys.

Mastermind Creations Hexatron! What can I say about this piece that hasn’t already been said by others?! In case you can’t already tell, Hexatron is a modern interpretation of Sixshot by MMC. Way back in this post, when I first started this blog, I said I would love it if someone made a modern Sixshot. Well, to this day Hasbro still has not made this a reality, so MMC stepped up to the plate! What they delivered here is nothing short of spectacular. Hexatron is transformation engineering genius brought to life. I still have not transformed this figure to all its modes (I only did the robot mode and tank mode so far), but I have seen enough reviews of the other modes to know that all 6 modes are great. Construction of the figure is extremely solid. MMC cares about it’s products and it shows. And at only $130, this is actually not a bad value for 3rd party products of this size. Speaking of size, Hexatron is probably a better fit for the MP-verse than the CHUG-verse, but I’ll take it anyway I can. Of all the figs featured in this post, if you can only get one, this is it. In fact, if you wanted to nominate figs for Figure of the Year and 3rd party products can be included, then Hexatron would without a doublt be nominated. Many may even argue he would win.

That only leaves the Gold Scout Upgrade Kit, which I have yet to open. This set upgrades Classics Bumblebee to Goldbug. I’ll check this out when I have some time.

Whew… that was a lot. So much so that I didn’t even open them all yet as of this writing, like I mentioned above. But having a deluge of TFs is better than being in a drought. And BotCon 2014 was pretty special. I may report on it in a separate post. Til then… Transform and Roll Out!