Archive

Posts Tagged ‘Decepticons’

Happy St Patrick’s Day 2024! Keen in Green Transformers!

March 17th, 2024 Comments off

After a 18+ month blogging hiatus, I am back! My last real entry in this blog was this one, dated around August of 2022. I didn’t think I would be away for this long. I am still very actively collecting TFs. But other responsibilities in life, both personal and professional, has kept me away from TFMatrix. But no more! I am picking up right where I left off, and I will continue to share what I’ve been doing as a TransFan with renewed vigor!

In a well-honored tradition of TFMatrix, I like to do special posts about my green Transformers on St Patrick’s Day. And I always feature green TFs that I have never featured before. So without further ado, for 2024, feast your optics on these green figures!

Green TFs 2024

Quick bits about each figure:

  • Masterpiece Hoist – This is the most expensive figure in this group. Hoist needs no introduction, and HasTak finally got around to re-molding MP Trailbreaker into MP Hoist. This figure is solid, and he looks good in both robot and alt modes. There is one part with the shoulder transformation that’s a bit scary, like it could easily be broken. But overall, Hoist is well-engineered and a lot of fun. I had Artifex, a 3P MP-style Hoist by MMC (Mastermind Creations). Artifex is horrible, and I sold it years ago (for a profit no less). MP Hoist is the one you need in your collection.
  • Legacy Evolution Armada Megatron – This is the largest figure in this group (if you count his shoulder protrusions). And he’s the easiest one to transform. Armada Megatron in the Legacy Evolution line is a figure you can easily pick up and play, which is not a bad thing in my book. This is a solid figure with a straightforward transformation. I don’t know much about Armada, as that came around during my TF Hiatus. The only other Armada Megatron I own was released back in Combiner Wars. I don’t recall that figure too well, but I should dig it out one of these days and compare it to the Legacy Evolution version.
  • Legacy Road Hauler – Road Hauler is a repaint of War for Cybertron Earthrise Grapple. So if you are familiar with that figure, you already know what you’re getting with Road Hauler. A few notable points make Road Hauler worthy of inclusion in your collection. First, I love this lime green. It really pops on this figure, and reminds me of the color of Constructicons. Second, I love that face! He seriously looks like he’s screaming for dear life, as if he’s aboard that doomed shuttle with Ironhide and Prowl in the 86 movie. And finally, Road Hauler may be a tribute to Hauler, a yellow crane vehicle we see in the very first ep of G1 Transformers. When Hound was shot by Laserbeak and fell into a ravine, we see some Autobots come to his rescue later. Cliffjumper looks up to a crane and says, “Hauler, pull him up!” Fans have theorized who exactly is Hauler over the years. Some suggest that Hauler is really Grapple, some thinks Hauler is some kind of drone, while others claim it’s another Autobot. If you subscribe to that last theory, then Road Hauler may be the figure you have long wanted.
  • Legacy Cosmos – Legacy Cosmos is perhaps the most sought-after figure in this group. He was released as a Walmart exclusive, in a limited sub-line under Legacy called Velocitron Speedia 500 Collection. Cosmos was the most recognizable G1 character in the collection, and the only figure who had a new mold (the rest were repaints, Road Hauler being one of them). So needless to say, fans and scalpers snatched him up quick. I never saw Cosmos in store. Luckily, my friend Gemini was able to track one down for me at the Walmart near him. Legacy Cosmos is a terrific figure. He has a fun transformation, and both modes look toon accurate. Engineering and tolerances are above par. Scales nicely with other CHUG figures. Legacy Cosmos is going anywhere from $70 to $150 these days. If you missed out, don’t despair. A re-release of Cosmos with some minor paint app differences is coming soon. Wait for that figure instead.
  • Legacy Prime Bulkhead – The last figure in this group is Bulkhead from TF Prime, released in the Legacy line. As a figure, Legacy Bulkhead is not bad. He is well-built and both modes look good. The overall transformation scheme is tried and true, but there are bits in the implementation that’s both refreshing and unusual. I will admit that there’s always something about this transformation that stumps me if I haven’t handled the figure in a while. Also, I don’t find this Bulkhead to be too screen accurate. He had a very different alt mode in the show, and in robot mode he looks way too blocky. Still, the figure is solid. Not a must-have by any means, though.

Links to previous St Patrick’s Day posts.

I can’t talk about St Patrick’s Day without mentioning March Madness. My school, UCLA, has a very dim chance of being selected to the field of 64. But even if they don’t, I’m still gonna try to watch as many games as I can.

Happy St Patrick’s Day everyone! Transform and Roll Out!

 

Categories: Pics

Transformers Rub On Faction Decals, More Pics ++

March 31st, 2022 Comments off

Today I am going to show off even more of my 3rd party TFs using these awesome decals.

Fans Toys Grenadier – clear backing
 

Fans Toys Hunk – clear backing
 

MakeToys Downbeat – white backing
 

A quick word about Hunk – I’m not sure why the contrast between the decal and chest is so bad on the pic. Must be bad lighting. The contrast of the red decal against the light orange chest is much more evident when looking at the fig in person. Here is a review of Hunk – see the pics there.

Links to previous decals:

Transform and Roll Out.

 

Categories: Pics

Happy St Patrick’s Day 2022! Seen in Green!

March 17th, 2022 Comments off

Welcome to another one of my special St Patrick’s Day posts! This is the time of year when I feature my green Transformers. I always try to look for green figures that I have not featured before. For 2022, I came up with the figures below, all from the War For Cybertron line.

This St Patrick’s Day feels quite different from the last time I did one of these, in 2020. COVID caught the United States by storm at that time, marking an unusual start to the decade to say the least. But we’re now in 2022. It’s debatable if we can say COVID is behind us, but life goes on.

Quick bits about each figure:

  • War For Cybertron Galactic Odyseey Lifeline – I call her the “Green Queen” of this bunch. She’s basically a WFC Earthrise Arcee repaint. Lifeline came packaged with WFC Ratchet in Earth mode. This was an Amazon exclusive, and the only way to get WFC Earth mode Ratchet. So yeah, Lifeline is a totally unnecessary repaint to get us G1 hardcore dummies to buy more figures. I love and hate Hasbro.
  • War For Cybertron Earthrise Allicon – This guy has got enough green on him to qualify for my St Patrick’s Day features. The fact this even got made as a toy is a treat for all G1-ers. The Allicon was another Quintesson foot soldier designed purely for the 1986 TF Movie without a toy origin. In the film, they love the energon goodies, but get seriously hangry when there are no more. The Allicon figure is not bad at all. It’s a fun figure to just pick up and play, transforming between a mechanical humanoid Alligator and robot.
  • War For Cybertron Earthrise Hoist – this character need no introduction. The WFC Earthrise figure is not bad. Good looking robot and alt modes. Not hard to transform and very G1 accurate.
  • War For Cybertron Kingdom Waspinator – Another terrific update to Waspinator. I need to dig out Generations Thrilling 30 Waspinator and compare him to this one. The two seems very similar, but I’m going purely by memory here.

On a separate note, St Patrick’s Day usually means March Madness. In 2020, the NCAA Tournament was cancelled. But in 2022 it’s alive and well. Can my UCLA repeat last year’s surprising appearance in the Final Four? Of course they can. They’re going all the way this year!

Happy St Patrick’s Day! Transform and Roll Out!

 

Categories: Pics

CHUG Update of G1 Season 4 Decepticon Targetmasters

February 23rd, 2022 Comments off

Happy New Year and Happy Lunar New Year! This is my first post in 2022. The 2020s have got off to a really lousy start, and I am hoping 2022 will reverse that trend for this decade. And I can’t believe we are yet at another year of the Tiger. Time flies.

I have a thing for TFs out of Season 4 in G1. Sure, nothing beats the first 2 seasons. But I felt Season 4 had better toys than Season 3. The figures were better designed, better built, and had some interesting new gimmicks that would forever be part of the TF landscape.

Season 4 introduced the “Master” gimmicks, with Headmasters and Targetmasters. Headmasters were the featured figures of Season 4, but I have said many times that I like Targetmasters more than Headmasters.

The Decepticon Targetmasters for Season 4 were Triggerhappy, Misfire, and Slugslinger. All 3 has been updated for the modern day, between 2016 and 2018. However, they were updated as Titan Masters (Headmasters in the modern day). Hasbro would not get to releasing their respective weapons til later, in the War of Cybertron line. The weapon figs are called Battle Masters.

Today I feature all 3 Season 4 Decepticon Targetmasters in their modern CHUG updates, together with their weapons.


Misfire, Triggerhappy, and Slugslinger in alt mode.


With Aimless, Blowpipe, and Caliburst.


Another view of the trio in alt mode.


In robot mode.


Holding the weapons in robot mode.


Action pose.

Some quick thoughts as I look at this trio:

  • All 3 base figs follow the same scheme. Triggerhappy was the first mold, and Misfire and Slugslinger are re-works off the same mold. HasTak did introduce enough molding differences between the 3 so they each feel like a unique fig. Great job!
  • In alt mode, there’s really no good way to attach the Battle Master weapon figs. Bummer.
  • G1 purists would scream bloody murder at the fact that all 3 are Titan Masters, and in G1 they were never Headmasters. Normally I would agree, but all 3 figs turned out so good that I’m choosing to ignore this inaccuracy.
  • Triggerhappy is my favorite among this threesome. I think this mold works best on him.

Now I’m hoping that HasTak would get to doing all the Season 4 Autobot Targetmasters. We got Crosshairs, but where is Pointblank and Sureshot?

Transform and Roll Out.
 

Categories: Pics

Transformers Purchased in March 2019

December 30th, 2021 1 comment

March of 2019 is Siege Month! All figures except for one (and one accessory) are from War From Cybertron: Siege.

  • War For Cybertron Siege Starscream, Walmart, $29.84

  • War For Cybertron Siege Soundwave, Walmart, $29.84

  • War For Cybertron Siege Ultra Magnus and Shockwave, bbts.com, $99.99

  • War For Cybertron Siege Chromia, Target, $19.99

  • War For Cybertron Siege Prowl, amazon.com, $19.99

  • Warbotron WB03-D Double Strike, bbts.com, $51.99

  • Fans Toys FT-08 Grinder Dinohead, bbts.com, $17.99

Starscream

First up in this WFC Siege month is none other than Starscream. And here we have something truly special! Ladies and gents, for the first time in TF history, HasTak has given us Seekers that transform into their Cybertronian alt mode from the very first G1 episode! We all know how that first episode started. Bumblebee and Wheeljack was looking for some energy conductors. On the way back to Iacon, they were intercepted by Seekers of various colors. The Seekers transformed into what fans dub as tetra-jets, and the chase was on!

The tetra-jet is something completely imagined by the show animators, in that this was the Cybertronian alt mode of robot toys that transformed into F-15s. Of course the transformation sequence from robot to tetra-jet was entirely made up and don’t make much mechanical sense. But as fans we accepted the show’s creativity, and welcomed the fact that Cybertronian robots would not have Earth alt modes when they were on Cybertron. The toys’ alt modes were all Earth in origin, and in the 80s it was never conceived that there would be toys that transform into a mode made up by the cartoon artists.

Fast forward 35 years, and HasTak has made a transforming tetra-jet to robot figure a reality! Having this Voyager-sized Starscream as a tetra-jet is something magnificent to behold. The design of the tetra-jet is slightly modified for the War For Cybertron show, but it still heavily resembles the G1 tetra-jet. The overall triangular scheme is clearly seen. What impresses me most about this figure is how the designers are able to take various design bits of the robot mode and have them transform into mechanical elements of the tetra-jet that makes sense. For example, the side shoulder protrusions of the standard Seekers (formed from the front intake of the F-15) comes together and forms the tip of the tetra-jet. And the circular chest design bits in robot mode forms part of the rear thrusters. The toy designers thought through this transformation, and it shows.

In alt mode, Starscream looks great in his standard grey with bits of blue and red. The tetra-jet is a bit bulky at the bottom where the legs go. But the rest of jet mode is a sleek representation of a Seeker dominance vehicle in the Cybertroian skies. Cockpit of Starscream’s tetra-jet is still orange, though why a Cybertronian jet would need a cockpit is anyone’s guess. Guns are attached under the wings. The alt mode is a solid and cohesive whole with no loose or dangling parts.

In robot mode, the figure heavily resembles the look of the classic Seeker that we all know. This is a spectacular achievement by the HasTak toy design team. This robot mode could easily pass for the robot mode of a classic Earth-style Starscream. This resemblance lends credence to the fact that this is the same character on Cybertron, with a Cybertronian alt mode, and later transcanned to have an Earth alt mode. The cockpit down the center chest area is “fake”, in that the module is purely decorative and doesn’t transform into the cockpit of the jet. All other pieces serve a mechanical purpose.

Construction of the figure is also superb. All joints are at the right tolerance. Pieces come together when they should, and separate when they need to. All in all this is a great figure. G1 fans will undoubtedly not pass this up. I give the figure the highest possible recommendation.

Soundwave

Next up in the WFC Siege lineup is Soundwave. This is another character where I was really looking forward to what HasTak would come up with as the origin Cybertronian interpretation.

I’ll start with the alt mode of WFC Siege Soundwave. I was really hoping this origin alt mode would be that statue looking thing that we saw Soundwave transform into in the very first G1 episode. Unfortunately, that is not the case. HasTak chose to go with something more utilitarian for WFC Seige Soundwave in that he transforms into a Cybertronian aircraft. It’s a bit of a bummer, in that I think they could have easily made a Soundwave figure that is able to transform into the statue/lamppost/highway-callbox thing. And I could be wrong here, but I don’t think Soundwave ever transformed in the WFC show. So this flying alt mode doesn’t do all that much for me. But this what we got. It is what it is.

The alt mode looks ok. It’s a Cybertronian form, so the toy designers could fancy this into any appearance they like. If you imagine how Soundwave would look as a jet based on how he looks in robot mode, it probably would not be too far off from the alt mode of WFC Siege Soundwave. The overall shape is very blocky. The tape deck area in robot mode forms the very back of the vehicle. Two wing/thruster bits that I assume are Cybertronian jet thrusters protrude at an angle, and these are the only major bits not found on Earth mode Soundwave. Overall I’m not too crazy about this alt mode. It feels very retroactively forced on a robot design that was not meant to be a starship.

As for the robot mode, it’s classic Soundwave. The blue and grey colors, overall rectangular proportions, the well-known head design, and the iconic chest tape deck, it’s all there. The colors and shape of the arms and legs look like it’s straight out of G1. The battery-formed shoulder cannon mounted on his right is there as well. All other cassette player bits, on the crotch and legs, are all present and accounted for. The only big difference from the Earth form in robot mode is the back, in that the previously mentioned Cybertronian jet thrusters are placed there. But for a robot mode that has to account for flying apparatus bits, that’s where I would expect them to go. The tape deck ejection mechanism works fine and well. In later months I would purchase his infamous cassette minions (released as Master-sized figures in WFC) and they can be placed inside.

As for weapons, WFC Siege Soundwave comes with his twin iconic battery-shaped modules. In robot mode, one becomes a cannon mounted on his right shoulder, and the other one transforms into a hand-held blaster. Also included is another rifle. This weapon can be unfolded to look like a sniper rifle, or folded to look like another hand-held blaster.

And just like Starscream, I find no issues with the construction of the figure. Despite not having an alt mode that I had hoped for, Soundwave still gets a recommendation.

Ultra Magnus

Ultra Magnus and Shockwave were purchased together as one order item. That’s how they sold it. No discounts were offered when bought this way. It is now Dec 2021, and on Amazon you can still get them both at slightly below regular price. I know I have seen both of these in the $30 range, in 2020. TF prices are like stocks. You never know how they will go.

Ultra Magnus is a terrific update. This character was given a great treatment in Combiner Wars. WFC continues that trend and makes even more improvements on everybody’s favorite City Commander. In alt mode, instead of being a car carrier, Siege Ultra Magnus looks like some kind of Cybertronian armor weapon vehicle. It looks close enough to his Earth alt mode, but at the same time different enough to not simply be an Earth-mode derived mode. While we’re on that topic, Ultra Magnus’ alt mode always looked a bit Cybertronian, even in G1. The front cab looks Earth mode enough, but the trailer section is definitely Cybertronian. So is it possible he only partially transcanned? It’s worth exploring.

Siege Ultra Magnus feels very solid in alt mode. The unit feels like one cohesive whole, despite the entire mode being puzzle-formed together like Ultra Magnus typically is in this mode. 5 weapons are attached in this mode for a very impressive look: 2 black blasters, 2 white missile launchers with red missiles that he’s had since G1, and a large silver rifle, all mounted and ready to intimidate some lowly Decepticon scum. The whole thing rides on a total of 10 wheels, and the unit does sit well on a flat surface. The colors are distinctly Ultra Magnus, with the cab white, the trailer blue, and top section red. The shape of the front cab is distinctly Cybertronian. All in all a very nice alt mode.

In G1, Ultra Magnus had 2 robot modes. There was the smaller robot transformed solely from the cab, a white repaint of the famous G1 Optimus Prime toy. This smaller robot was never seen on-screen in G1. Then there’s the bigger robot formed from both the cab and trailer, the appearance that we’re all familiar with from the cartoons. Siege Ultra Magnus faithfully reproduces this scheme. The cab is capable of forming a smaller robot resembling Optimus Prime. (sidebar: part of this Ultra Magnus mold would indeed be reformatted into WFC Siege Galaxy Upgrade Optimus Prime, to be released later, but that’s for another day) In this mode, Ultra Magus is well-proportioned. Joints are at the right tolerances. For a blocky figure, the articulation is adequate. Transformation from cab to this robot mode is nothing we haven’t seen before. But this tried and true formula works for this character, and I’m never a proponent of messing with what works. I’m happy this mode is included, but we didn’t pay the $50 price tag to have Ultra Magnus in this mode.

To get Ultra Magnus into the robot mode that we all know and love, the trailer disassembles and acts as armor over and on top of the smaller robot mode. 3Ps have implemented such a mechanism already, most notably the FansProject City Commander Add-On Set. HasTak has explored this scheme too, with Evolution Optimus Prime and Rodimus Prime. I believe this is the first time that HasTak has done this for Ultra Magnus. In G1, the trailer isn’t really so much an armor for the cab. The trailer gets transformed into the main body, and then the cab gets attached to it behind the back. All other Ultra Magnus figures in the modern day kind of has the cab and trailer transform as one. So it is indeed a nice treat to see that WFC Siege implemented an armor attachment mechanism for the smaller cab robot to fully form Ultra Magnus.

And what a glorious robot mode this is. Fully armored up, Ultra Magnus is every bit his G1 self. There is no mistaking this character for any other. His entire design aesthetic, down the to the last detail, is based on G1. The colors, the overall blocky shape, the shoulder missiles, all G1 derived. Design of the chest, arms, legs, and head, all taken from G1. With this robot mode, it’s clear that there was very much an Ultra Magnus on Cybertron before coming to Earth. Transformation to this mode is very much a puzzle forming adventure, but you kinda expect that with this character. It’s fairly obvious where each armor piece should go, and the entire package comes together really well. Articulation in the mode suffers a bit because he’s so blocky, but what’s offered is sufficient.

I give this Ultra Magnus figure the highest possible recommendation. Yes by now we all know how he ends up in the Netflix War For Cybertron series, but don’t let that discourage you. And maybe you expected a $50 figure to be true leader size. Don’t let that discourage you either. The figure is made to scale nicely with other cast members from WFC. The cost of admission for this figure is paid in full with the number of modes and accessories. He can deal with that now. I know you can.

Shockwave

Shockwave is another character that got a great update in WFC Siege. He is also leader class. Or more accurately, he is sold as leader class. There is the core figure of Shockwave, which is voyager class size. Then there are the accessories that can be added on top of the core figure, in both robot and alt mode. All this in one package is how Hasbro justifies the $50 price tag.

Let’s take a look at the core figure first. In robot mode, Shockwave is every bit his G1 self. All the classic iconic features of Shockwave are present, from the purple colors, the left-arm blaster, the left-arm hose attached to his backpack, the his cyclops eye. At voyager class, he scales well with other Decepticons in WFC Siege. The figure is well built, no joints too loose or too tight. Ample articulation points gives the figure some great poseability, and solid engineering means he can actually hold those poses. Transformation to alt mode follows the standard Shockwave scheme, with some modern variations. Some aspects of the transformation seems borrowed from both Fans Toys Quakewave and MP-29 Shockwave, but on a CHUG figure the overall scheme is way more playable. WFC Siege Shockwave still transforms into the iconic space gun that we all know and love, and it’s good see HasTak did not butcher this into something different (like a Cyberverse Shockwave, the Fall of Cybertron Shockwave, or the Alternator Shockwave).

Now on to the accessories. In robot mode, the accessories can be attached in a number of different ways. But the default configuration is some large flat gun pieces added onto the bottom of the feet, some wing and gun pieces that are attached to the shoulders, and a backpack cover. Shockwave looks quite menacing in this mode, and the overall feel does reflect a mad scientist that decided to perform Frankenstein-ish experiments on himself. In the space gun mode, the extra accessories are attached so Shockwave looks more like a genuine Cybertronian jet. It does look cool, and give more credence to the fact that Shockwave can fly around in alt mode.

So do I recommend this figure? The short answer is yes. The core Shockwave figure without the accessories is a terrific modern day CHUG update of the Decepticon mad scientist. This is probably the first real update of Shockwave in CHUG, and the core figure does not disappoint in any way. Now for the long answer. The extra accessories are kind of unnecessary, in my opinion. They’re cool, but don’t really add that much to the character. In fact, I think it sort of turns Shockwave into a different character, one that wasn’t explored very much in the G1 cartoons or the WFC Netflix series. And speaking of the WFC series, we never saw Shockwave in any of these enhanced modes. It feels like HasTak made these extra things to justify Shockwave being a $50 figure. I would have much rather they released a $30 figure of just the core Shockwave minus all the extras. But like I said already, this is the ultimate CHUG Shockwave that has been produced. So if you want one, you have to buy it with all the extra baggage. And as of this writing, I will emphasize again that you can buy this for less than MSRP on Amazon. Logic dictates you buy this now if you haven’t already.

Chromia

Here we have another rework off of the now famous Fembot deluxe mold. We got Moonracer and Novastar in Power of the Primes, so it’s no surprise that we would get Chromia in WFC Siege. Personally, I would have been ok if they didn’t make WFC Siege Chromia. I would have simply used Thrilling 30 Chromia to complete the Fembots. I think I like Thrilling 30 Chromia better anyways, if only for the variety.

WFC Siege Chromia is a rework because it’s not an exact repaint. The head mold is different. She gets different weapons. Chromia gets something that more resembles a sniper rifle, and we saw her use this several times in the WFC Siege show. Some pieces in alt mode are molded differently too. Chromia gets back pieces that covers the rear wheels, the cockpit piece clearly looks different, and she gets 4 molded-on front headlights. I commend HasTak for providing these variations to the same mold, to counter what would otherwise be a quick cash-grab. WFC Siege Chromia does not come with that Combiner Wars attachment.

G1 purists will undoubtedly get this Chromia to complete all 4 of the original Fembots (along with this Elita-1 or the upcoming Netflix Elita-1). For everyone else, this Chromia is an optional purchase if you already have Moonracer or Novastar. But buy this rework if you want. No judging here.

Prowl

WFC Siege Prowl follows that “Prowl” formula that all TransFans since G1 have come to memorize by heart. By “Prowl” formula, I mean that the transformation is tried and true for this character, the figure is deluxe size, Prowl colors of black and white are used, the alt mode is a police sports car of some sort, and HasTak will undoubtedly repaint this mold into Bluestreak and Smokescreen. WFC Siege Prowl certainly offers no deviation from this formula, but it’s not necessarily a bad thing.

WFC Siege Prowl is deluxe size, as you would expect. The alt mode, while Cybertronian, doesn’t offer much originality when compared to his Earth alt mode of a Nissan Z throughout the different decades. In fact, if you told me that this alt mode is a concept Nissan Z, I would have believed it. The writing of “POLICE” that are usually on Prowl’s doors are now replaced with Cybertronian font. The wheels are clear instead of black. The police sirens on the car’s roof is found here as well, but they look at bit too Earth mode if you ask me. The alt mode comes together well as one cohesive whole. All in all, a solid alt mode, but not much originality in that this is supposed to be in Cybertronian form.

Transformation is classic Prowl so I won’t describe it too much. Car hood becomes the chest, arms come out from the sides, rotation at the waist, car back becomes the legs and feet, car doors swing out to form the wings. You’ve seen this script many times.

In robot mode, WFC Siege Prowl is iconic Prowl. No one would mistake this bot mode for any other. I really don’t have much to say about the robot mode, because this is Prowl through and through. That’s a good thing, as this Prowl is supposed to represent the G1 version of this character on Cybertron. This figure does not come with shoulder rockets, and that’s a shame, probably the only aspect that make this less Prowl than usual. The roof sirens in alt mode can be detached and placed on his rifle, or be attached to his forearms to be used as a shield.

If you collect the WFC Siege line, you will undoubtedly buy Prowl regardless of what I say. He’s an iconic G1 character that no true G1-er would pass up. The WFC Siege version does Prowl very well, in that it’s G1 in all the right ways. The only critique I can offer here is that it may be too G1. The alt mode looks too close to what he would be on Earth, and I just can’t imagine Cybertronian vehicles resembling Earth vehicles that much. But as far as having a CHUG Cybertronian Prowl, this fits the bill.

Double Strike

Warbotron Double Strike got a dedicated review already, so go check out that post for all the details. Double Strike is Warbotron’s homage to Strafe from the Technobots. In short, this is a good figure, but not as good as Turbo Ejector (Afterburner).

As of this writing, Double Strike and Turbo Ejector are the only Warbotron Technobots I have. I really want to get the rest. I was overall not terribly impressed with MakeToys Quantron, so I sold that set and re-invested in the Warbotron set. I never got the official Combiner War Technobots set, just Scattershot by his lonesome. That is bizarre, considering how much I love the Technobots. Perhaps another 3P will attempt the Technobots. Would Fans Toys be brave enough to do this? Let’s hope so.

Grinder Dinohead

The last item featured this month is an accessory for Grinder. More specifically, this alternate dino head replaces the default dino head that comes with Grinder. I have mentioned repeatedly on this blog that I feel Grinder’s T-Rex mode make me think of Barney. The problem is the head. Fans Toys has heard your complaints and released this alternate Dino head.

In short, this head is much, much better. I didn’t really look at what is changed on this head, but it certainly doesn’t make me think of Barney anymore when I see Grinder in T-Rex mode. See for yourself. With the alternate head attached, Grinder resembles Grimlock from the G1 movie much more closely. This accessory piece goes for $17.99. At this price, every Grinder owner should get this. However I have seen this marked up to about $100, in this era of global shortages of just about everything. Fans Toys items always gets marked up these days, but this is just crazy! I can’t say if FT will make more of these, but I personally would not pay $100 to get one.

More TFs are to come in the months that follow. This is my last post for 2021. Happy New Year! Transform and Roll Out!
 

EDIT 2021/12/30:

I later found that I took some pics of all the Siege TFs this month. Here they are. Enjoy!

Categories: On The Hunt, Pics

My Ramjet Collection

December 10th, 2021 Comments off

Today I proudly present my Ramjet collection. I could swear I have more Ramjets, but this appears to be it. I did sell one Ramjet, but that figure was built so poorly it does not deserve to be in my collection. Yes I only keep the best.

I have a thing for Ramjet. The simplicity and stupidity of his attacks – very appealing. I would consider myself fortunate if I could solve all my problems like Ramjet. I’m not sure who would be my favorite Seeker. It’s either Starscream, Skywarp, or Ramjet.

From left to right: ToyWorld Combuster, Classics Ramjet, War For Cybertron Earthrise Ramjet

Some quick bits about each of these figs, in the order released.

Classics Ramjet

Classics Ramjet was released pretty early in the era of modernizing classic G1 characters, I think in either 2006 or 2007. Classics Starscream was released as part of the first wave of Classics, so we knew the Coneheads wouldn’t be far behind. Ramjet was the only one released in mass retail as part of Classics in the United States. For Dirge and Thrust, you had to either get them imported as part of Henkei, or wait for the later Generations line.

Classics Ramjet is still a fun figure today to pick up and play, but it is a dated figure for sure. Even for a CHUG fig, the robot mode has its limitations by today’s standards. There’s no waist swivel or ankle tilt. The arms seem a bit short as they don’t extend at all from jet to robot mode. The wings on the legs cannot fold back, so they are stuck extending straight outward.

As dated as this figure is, I still recommend getting one today if you can find one at reasonable price. The jet mode still holds up well. The figure is well constructed. Mine is still in very good shape despite an adequate amount of play. This Ramjet figure is a good first attempt at a modern day Conehead Seeker. And in the halls of TF history, the figure is a good representation of where we were and where we’ve been. This figure paved the way for better Conehead Seekers today.

ToyWorld Combuster

I kind of already summarized my thoughts about the ToyWorld Seekers back in this post. ToyWorld Assault (Thrust) was given more treatment here, and ToyWorld Requiem (Dirge) here. Today is Combuster’s turn. In short, I like Combuster way more than the official MP Ramjet.

Looking at Combuster now in 2021, it’s becoming a bit dated. The jet mode is still great, but the robot mode is beginning the show its age when compared with recent offerings of what a MP style jet robot could potentially be. I don’t have MP-52 Starscream, but I’ve seen enough pics, watched enough reviews, and have friends verbally confirm that the robot mode is out-of-this-world awesome. Looking at pics of MP-52, then looking at pics of Combuster, it’s clear who is a toy and who is the superior physical manifestation of a show character.

But don’t get me wrong. Combuster was a great 3P MP Ramjet for its time, and is still a solid transforming figure today. The jet mode is awesome and scales well with official MPs. The robot mode is a tad tall, which is perhaps the only real weakness in this mode. Combuster sports super solid construction backed by quality materials. The paint job is superb. Transformation is fun and intuitive. Complex enough to be MP, but definitely not frustrating. I don’t know if I would get one today, considering that HasTak would probably take the MP-52 mold and reformat that into Conehead Seekers. But as of this very moment, Combuster is still in my opinion the best MP Ramjet on the market.

WFC Earthrise Ramjet

My newest Ramjet figure is the one from War From Cybertron Earthrise. This was released in 2020 as an Amazon exclusive 2-pack with Dirge. And if you missed out on this 2-pack, it sucks to be you. As of this writing, this 2-pack goes for $219.99! Yikes. MSRP was $59.99. It’s only been about 18 months since release. I guess they seriously didn’t make enough, or damn scalpers are at it yet again. And in case you’re wondering, Thurst was a Target exclusive. And now that I think about it, Thundercracker and Skywarp was also a Target exclusive 2-pack. I’m conflicted about all these exclusivity deals that Hasbro is making. On one hand I’m glad they’re released, but on the other it’s like you have to be on top of releases or you’ll miss out. First world problems at its best.

But back to this Ramjet figure. This is by far the best and most G1 accurate Ramjet that HasTak has came up with. The overall mold is a re-work off of WFC Siege Starscream. When that fig came out, we all knew HasTak would repaint this at least 5 more times, one for each G1 Seeker. And they really made it happen. This figure is highly similar to the Classics Seeker mold, in that overall transformation feels identical. But many improvements are made to modernize the figure. For starters, it’s Voyager size, the size that Seekers should have always been. Ankle tilt has been added, for better stability in A-stance. The arms now have an extension mechanism, from jet to robot mode. Wings on the legs can how fold back. Yes all my gripes about the Classics Ramjet has been addressed. I think HasTak planned for all these repaints when they designed Starscream, because the mechanical differences in Ramjet feels fluid and not tacked on. My only gripe now is the weapons. WFC Ramjet still comes with the same null-ray blasters mold that Starscream has. He should have something that more resemble cruise missiles. I was expecting a 3rd party accessory company to do this (like Dr. Wu Customs perhaps). Maybe someone did, I’m not sure.

I totally recommend this figure. But I wouldn’t pay the scalping prices. My hunch is Hasbro would re-release this for a general release at some point. Wait for that.

“If it flies, crash it!” Wiser words have never been said. Maybe except this… Transform and Roll Out!
 

Categories: On The Hunt, Pics

Transformers Purchased in February 2019

August 16th, 2021 Comments off

February 2019 is another month of all official purchases. This month it’s back to mostly figs from Studio Series.

  • War For Cybertron Siege Skytread, amazon.com, $18.88

  • Studio Series WWII Bumblebee, Walmart, $19.87

  • Studio Series Barricade, Walmart, $19.87

  • Studio Series Sideswipe, Walmart, $19.87

  • Cyberverse Shockwave, Amazon seller, $14

Skytread

WFC Siege Skytread was released in the same wave as all the WFC Siege deluxe figures last month. For some odd reason, I couldn’t find one til this month. This was probably for the best, as there has been numerous complaints of production issues with Skytread’s right leg not being able to move. My assumption is these issues only appeared on the very first batch. I found my copy a bit later, and it’s fine.

Any true G1er knows that Siege Skytread is really G1 Duocon Flywheels. Why Hasbro chose to change the name here is anyone’s guess. The other Duocon, Battletrap, was released in 2018 in the Power of the Primes line as Battleslash and Roadtrap. Very good to see that the Duocons are complete in the modern era.

For those that don’t know, Duocons were released in G1 Season 4. Their gimmick is that two vehicles come together to form one robot mode. There is a spring mechanism that activates when combining to robot for a semi-automatic transformation. The process is completely manual when going to the alt modes.

For PotP Battletrap, Hasbro went one step further and gave each vehicle component a robot mode, and they still combine into the larger robot as Battletrap. While this sounds good on paper, having all these modes made none of the modes all that good. In Battletrap robot form, the figure is a bit unstable. Figure integrity will be compromised with enough rough play. For Siege Skytread, Hasbro stuck with the basics and implemented a simple jet and tank that will combine into Skytread. I appreciate this decision, as the individual alt modes are better, and Skytread’s robot mode is way more stable.

In robot mode, Skytread is unmistakably G1 Flywheels. The colors should be a dead giveaway, as no other G1 TF I can think of has a dark red color chest and brown limbs. The head mold also closely resembles the look of Flywheels. The design itself is not that unique, but it’s what he had in G1. Skytread is fairly poseable, with joints at all the right places and at the right tolerances. He’s well proportioned and without too much kibble. Again, he’s very stable. The two components will not accidentally separate. In robot mode, Skytread is about the same height as PotP Battletrap. The two Duocons are ready to kick ass together. Or get their asses kicked together. The latter is more likely.

Separation to alt modes is pretty straightforward. Just pull apart at the waist. Transformation of each component to its alt mode is not difficult at all. The legs form the tank. It looks kinda Earth style, but with Cybertronian enhancements. My only gripe about the tank is that pegging the main cannon in the middle peg hole doesn’t work well. There’s a piece right behind this peg hole which sort of blocks access for the back of the cannon. Better to peg each weapon on top but off center, one to the right and one to the left. The upper body forms the jet, which looks like a Earth Harrier. This mode’s not bad, though the obvious weakness here is the under-kibble that results from where the arms go. Both components have plenty of peg holes for the 2 weapons. The 2 weapons can also be combined into a super cannon, another recognition of this character’s two-as-one motif.

G1 fans who already bought PotP Battleslash and Roadtrap will get Siege Skytread regradless of what I say. To everyone else, I say get him. He’s a fun figure with a gimmick that is well implemented.

Bumblebee

First of the Studio Series figures this month is WWII Bumblebee from The Last Knight. I didn’t look at the box carefully when I bought this, so I just assumed this is from the Bumblebee movie. So the whole time I was trying to figure out when did Bumblebee transform into this WWII vehicle. I should have looked closer.

I didn’t like The Last Knight all that much, so I can’t recall any specifics about the movie. I definitely don’t remember Bee transforming into the alt mode represented by this figure. If I ever re-watch it I’ll look for it, but that’s not happening anytime soon.

As for SS WWII Bumblebee, the figure is mediocre at best. The alt mode is kinda unique. I do like the main cannon and the rotating blaster on the roof. But that’s about all the figure has got going for it. In alt mode, the whole thing doesn’t come together as well as it should. The roof cannot completely close down, because the cannon on the inside will come into contact with other pieces. Transformation is sorta frustrating. There’s too much kibble on this buy, things getting in the way and thus preventing a smooth experience. Pieces love to pop off during transformation. WWII Bumblebee is very much a panel former. The hips are on ball joints that are way too lose, so the figure does not stabilize well in robot mode. It is kinda cool that the main cannon can be detached and used as a hammer in robot mode, but that alone does not redeem the other negatives. Add to all this the fact that I don’t even remember Bumblebee in this form makes this a very forgettable purchase.

I think Hasbro actually re-released this figure in the Buzzworthy Bumblebee line. Different packaging but the same figure. Leave this on the shelf if you see it. Not recommended.

Barricade

Studio Series Barricade is my 5th Barricade figure from the Movie-verse. I have written about how none of the mass-produced deluxe Barricade figures thus far are all that good. And I have mentioned that Masterpiece Barricade (MPM-5) is by far the best. So how does SS Barricade fare? Let’s find out.

It alt mode, I am impressed by the amount of detail on SS Barricade. The overall black and white scheme works well here for Barricade. There are a lot of printed on labeling on the vehicle, such as the police logo, the words “POLICE” on the doors and spoiler, “643” on the roof, “911” on the rear sides of the vehicle, and last but not least the words “to punish and enslave”. The words “SALEEN” is molded across the rear. The sirens are a separate piece on the roof, painted blue on the right and red on the left. Rear brake lights are painted. HasTak did a top-notch job with the mold of the entire vehicle by closely resembling a real Ford Mustang. The figure stays together in alt mode, and Barricade rolls nicely on a flat surface. The spinning wheel accessory can be attached under the front hood, if you want to recreate that scene of Barricade threatening Sam. For a mass-retail deluxe toy, SS Barricade gets the highest marks in alt mode.

Transformation to robot mode follows the standard Barricade scheme, so I won’t describe it too much. Back of the car form the legs, sides of the car form the arms, and the front section flips down to form the chest and reveal the head. Car hood and roof ends up on the back. Of all the mass-retail deluxe Barricades made, this is by far the best. SS Barricade looks closest to his on-screen persona and to the MP figure. He stands up well on 2 legs. The arms are kind of long, but that’s his design. The detail on the head is amazing. SS Barricade is also not terribly difficult to transform, much more forgiving than the MP figure.

I give SS Barricade the highest possible recommendation. If you like this character, go out and get this.

Sideswipe

Movie-verse Sideswipe is another figure where Hasbro has made tons of. So I guess it’s no surprise that a Studio Series version would be made. This SS Sideswipe is from Dark of the Moon.

Looking at this SS Sideswipe immediately reminds me of the custom silver painted DOTM Sideswipe that Gemini made for me (sidebar: That post was made exactly 10 years ago today). DOTM Sideswipe should have been painted this nice silver to begin with, and if you’re wondering how he looks out of the box, here you go. Yeah, that dull grey doesn’t do it for me either.

SS Sideswipe obviously corrects this problem by having this nice silver paint applied all over. The alt mode is nice and sleek. As a Corvette, I think he looks terrific all around, especially from the back. His twin weapons are attached under the vehicle at the rear so they look like the exhaust. The entire mode stays together well, no floppy or dangling bits. The Corvette logo on the front hood is molded on and painted over. A nice touch.

Transformation to robot mode is pretty standard fare for a Movie-verse car TF. My memory is now hazy, but I do remember ROTF Sideswipe as rather difficult to transform, and DOTM Sideswipe being relatively easier. SS Sideswipe is probably more in tune with the DOTM version, as far as transformation difficulty. The front part of the car become the legs, and the rear part of the car forms the chest and arms. Car hood and roof ends up on the back. Upper part of the car doors become wings. The lower part of the car doors are detached and serve as Sideswipe’s blades in robot mode. You could argue it’s a bit of puzzle-forming here, but nothing to get terribly upset about. SS Sideswipe does stand OK when you take care to really balance him, but he’s not the most stable fig on 2 legs.

Overall, SS Sideswipe is a solid addition to the Studio Series line. There’s nothing here we haven’t seen before, so I would not put this in the required purchase category. But what is there is all done pretty well. If you’re on the fence on this figure, go ahead and get him.

Shockwave

This is my second figure from Transformers Cyberverse. And this 2nd figure is also Shockwave. Yes, I now have both Warrior Class and Ultra Class Shockwaves. As of this writing, these remain my only 2 figures from Cyberverse.

It’s obvious that the whole Cyberverse line of toys is marketed to young children. Sometimes you see a figure or two that may appeal to you, usually out of nostalgia or design. But as a whole, the mature TF Collector need not bother with this line. The toys themselves are full of gimmicks and have extremely simple transformations. I watched through all of the show’s Season 2 on Netflix, mostly to see how my favorite characters from G1 would be updated. The series is fairly forgettable, and you’re not missing out if you missed out.

So how is this Ultra Class Shockwave figure? He’s ok. The robot mode is pretty solid. He’s unmistakably Shockwave, with the purple colors, the cyclops eye, and iconic left gun arm. I like how the Decepticon logo is painted sharply on the chest. The figure is entirely plastic, and all articulation points are either ball or rotation joints with no ratchets. Pretty standard fare for a figure in this line.

Transformation to the walking tank is kinda like the Warrior class version, with one notable exception. The left arm goes over the back to form the main cannon. And in its place, a 2nd left arm that will act as the tank’s front left leg sprouts from the left side of the chest. Rest of the transformation should be obvious just by looking at pics. The chest section rotates 90 degrees up. This piece does not lock into anything in alt mode, resulting in a tank mode not as solid as the Warrior class version. The gimmick on this figure is that there’s a switch on the side of the gun. Flipping the switch backwards will separate the gun chamber and protrude forward the laser effects. Flipping the switch forward reverses this. This can be done in both modes. Young kids will probably get hours of enjoyment out of this gimmick.

I can’t tell if the Warrior class or Ultra Class of Shockwave is more show accurate. Rating this purely on the figure, I think I like the Warrior class better. I find the whole 3 arm thing on Ultra Class Shockwave a bit disturbing. I know Shockwave is a mad scientist and all, but 3 arms?! A bit too Frankenstein for my taste.

Lots more to come next month. Transform and Roll Out.
 

Categories: On The Hunt, Pics

Decepticon Air Superiority, 2021 !

May 17th, 2021 Comments off

I haven’t posted anything in so long. This blog seriously needs some love, so I’m doing one today. And once again, a bunch of random Decepticon jets are lying about here and there. Which means it’s time for another Decepticon Air Superiority post!

Prior such posts in years past:
2012
2017

Here are the jets to give the Autobots nightmares in 2021.

All 5 jets come from different TF toylines. In order of release:

  • Dreadwing is from Transformers Prime Beast Hunters
  • Armada Starscream is from Generations Thrilling 30
  • Snapdragon is from War From Cybertron: Earthrise
  • Cyclonus is from War From Cybertron: Kingdom
  • Scourge is from Studio Series 86

In terms of continuity, Cyclonus and Scourge are obviously related in G1, with Snapdragon appearing with them a season later in the US continuity. Armada Starscream and Dreadwing are on their own.

As for the toys, Armada Starscream and Dreadwing are fairly outdated by today’s standards. These are still good mass-retail deluxe figs to pick up and play with. They present no challenge transformation-wise, and both figs look decent in both modes.

In my last post I reviewed Kingzilla, a 3rd party MP homage to Snapdraon. Here we have the official CHUG version of the same character released in the WFC Earthrise line. And just like Kingzilla, I like WFC Earthrise Snapdragon quite a bit. This is a fun figure, easy to transform between the 3 modes. Not only that, all 3 modes look fantastic. This is not an easy feat by any means for a Triple Changer. Of course the Headmaster gimmick is still in place. Krunk functions as the head for both robot and dragon, and he can sit in the cockpit in jet mode. G1 purists may whine over the minor alteration in transformation scheme, in that the jet nosecone become part of the legs instead of being on the robot’s back. Personally I don’t see it as a big deal.

The 2 newest figure here are Cyclonus and Scourge. I acquired them both in 2021. It’s unclear to me why the 2 figs are released in separate toylines. Cyclonus could have easily been released as part of Studio Series 86 as well. Perhaps he has an appearance in Kingdom, the upcoming final chapter of War For Cybertron.

WFC Kingdom Cyclonus is hands down the best Cyclonus that has ever been made. This one easily tops my other Cyclonus figures, such as the one from Generations or Combiner Wars. WFC Cyclonus looks great in both modes. The jet mode is nice and sleek, while the robot mode is proportionate and toon-accurate. Transformation is pure joy. For a mass produced toy, the transformation difficulty is above average yet very satisfying. There are enough steps to fully qualify this piece as geared towards collectors, but at the same time the whole process is intuitive and ingenious. The jet nosecone transformation deserves special mention. The entire unit folds and compacts into itself that it’s the perfect way for Cyclonus to go from alt to robot. Construction of the figure is superb as well. Cyclonus gets the highest recommendation from me.

Studio Series 86 Scourge is a terrific addition as well. I don’t think he’s as good as Cyclonus, but this is also without a doubt the best Scourge figure made to date. Both modes look good. The robot mode is toon-accurate, while the alt mode replicates that boat-looking space craft that he’s supposed to be. The transformation is tweaked a bit from G1 so that SS86 Scourge is not as much a shell-former. It does take some work to align all panels of the alt mode, but it can be done with just a bit of effort. In alt mode, SS86 Scourge can be configured with his head exposed above the space craft, something we often he him do in the G1 cartoons and Movie. Hardcore G1-ers will probably multiples of this figure to create a Sweep army. This makes even more sense if some 3P will create a head for the Sweeps (basically Scourge minus the mustache).

So who’s leading this bunch? Other than Snapdragon, all the others have a claim to Decepticon leadership. Though individually, Snapdragon may be the most powerful.

Transform and Roll Out.
 

Categories: Pics

KFC Toys Kingzilla and Komodus Quick Review

April 12th, 2021 Comments off

The Horrorcons are one of my most treasured subgroups from G1 Season 4. They are both Triple Changers and Headmasters, successfully combining the two gimmicks. My cousin had both Apeface and Snapdragon, and I was super envious since I had neither. I remember playing with his Apeface quite a bit, but not Snapdragon. I also remember buying Apeface for my best friend at the time. Those were the days.

The jet modes of both G1 Apeface and Snapdragon are really good. But their other modes left a lot to be desired. In robot mode, both of them look like they are wearing diapers with legs that are way too short. And in beast mode, both figures suffer from having way too much bulk in the main trunk section. Even for G1 standards, all modes other than the jet modes were horrible (pun intended).

When I started collecting TFs again in the modern era, I knew Hasbro would update the Horrorcons at some point. And they did. We saw WFC Siege Apeface in 2019, and WFC Earthrise Snapdragon in 2020. It took them longer to do the Horrorcons than I thought they would, but better late than never.

As much as I loved the Horrorcons, it would be absurd to expect HasTak to make official Masterpiece versions of the duo. So it was inevitable that a 3P company would attempt it. Enter KFC. This is Keith’s Fantasy Club, and not the famous fried chicken chain. KFC released their takes on MP style Horrorcons, around 2017. And as far as I know, they’re the only 3P to attempt it thus far. Are Horrorcons not as popular as I thought? Am I the only TransFan that like them? The horrors!

I acquired KFC Kingzilla (aka Snapdragon) in 2020 on a sale. Prior to that, the only KFC product I have are these E-Nergeon Cubes. They’re not bad, but this product alone is hardly an indicator of the quality of KFC’s offerings. Kingzilla is my first real figure from KFC. So how good is Kingzilla? Let’s find out. But first let’s first take a look at the box and what’s inside.

Box and Contents

Front of the box.

Back of the box. Gotta love this bio. Riches! Fembots! TFs apparently value much the same things humans do.

Look at all the stuff inside! Kingzilla comes with:

  • 2 rifles
  • a magnetic metal plate for Komodus to stand on
  • 2 chest blast or flame thrust effects
  • extra face for KFC Kingorilla (Apeface), attached to Kongor (Spasma)
  • 2 extra red parts that I assume is a fix or enhancement for Kingorilla
  • bio card
  • instruction book and comic

Another accessory is a stand to be used in jet mode. I didn’t actually try this. Kingzilla is a heavy figure, and I’m not entirely sure this stand can fully support the weight for an extended period of time. But don’t say KFC doesn’t love you. They included everything but the kitchen sink in this package. Bravo.

Robot Mode

I always start with the mode that the figure comes packed in.

That is one awesome looking MP style Snapdragon. This is a big and beefy figure. The colors are G1 accurate. Materials used on the figure is superb, with high quality plastic and die-cast. Kingzilla really has presence, he impresses by appearance and size alone.

Smart observers will notice that the above pic does not show the figure in a standard traditional A-stance. And that leads me to the first very noticeable issue with Kingzilla. See below.

The legs are on ratchets, and this is the first position swinging outwards. It’s way too wide! Quite a few TFs share this problem. Generations Jetfire is the first figure that comes to my mind. Someone should coin a term to describe this problem.

The pic above shows the legs perfectly straight. So it’s either this, the super wide A-stance, or some kind of modified action stance to have Kingzilla posed in a standing position. This issue does mark down the figure a bit for me. But on the bright side, this is about the only real weakness with this figure. It’s all good news from here.

Looking at Kingzilla from the side. The obvious distraction here is that huge backpack which makes up the jet mode nosecone. But it doesn’t bother me that much. Notice the super long heel spurs, which provides great stability for the figure.

Another shot of the side, with the arms raised, to get a better look at the sides of the body and legs.

Back of the figure. A bit bulky, but I like how it looks.

As I look through these pics of the robot mode, I realize almost all of them has Kingzilla holding the 2 rifles. So here I offer a pic without the rifles, in his wide A-stance.

Pretty good face sculpt. This is how I remember Snapdragon looking, in the animation.

KFC did not forget the chest tech specs that was a feature on all G1 Headmasters. The specs automatically come up upon inserting the Headmaster. Seeing this unnecessary but nice gimmick brings me back to the 80s. I yearn for the 80s.

Kingzilla in an action pose. There is quite a bit of articulation points in robot mode. However, some issues hinder the overall articulation. A lot of the joints are on ratchets, so it does limit the positioning. The bigger issue, however, is that this is a large and heavy figure. There are poses that are achievable, but the figure won’t hold it due to its own weight. The big backpack also makes the figure back heavy, limiting poses where Kingzilla is leaning backwards.

Here is Kingzilla with those chest blast effects. I guess Snapdragon did this somewhere in the G1 animation, though personally I don’t remember it. Kudos to KFC for including it. Nipple blast action never gets old.

Now for some size comparisons.

With MP-36 Megatron. I like how these scale. In the wide Kingzilla A-stance, Megatron is actually a bit taller, if you compare where their eyes are. But Kingzilla is overall bigger, buffer, and beefier. That’s how I would expect these 2 to scale.

With WFC Earthrise Snapdragon.

Before we get to the other modes, let’s take a look at the Headmaster Komodus (Krunk).

Komodus looks pretty good. I can’t say how close he resembles the G1 toy or cartoon, since I don’t pay close attention to the Headmaster Nebulans.

Here is Komodus with the magnetic stand. I don’t detect any magnets when Komodus is placed on it, so it’s possible this is not magnetic at all. Now that I think about it, I’m not sure where I learned that this is supposed to be magnetic. Not a big deal, I can’t see myself using this accessory often.

I’m very pleased with the robot mode overall, though it is my least favorite mode of the 3. The obvious weakness is that super wide A-stance. The big backpack could turn off some fans as well. But he’s got way more positives than negatives in this mode. He’s a big, imposing figure, built with solid materials. Superb construction with tight ratchets. Nice paintjob with G1 accurate colors. Enough articulation at most of the joints that need them.

Jet Mode

The instructions start off with going from robot to jet first, so that’s the mode we’ll look at next.

That is one sleek and awesome looking jet!

Here we see the jet in another angle. It’s very G1 accurate, as far as the shape of the jet. KFC opted to use a dark silver as the overall color, instead of Snapdragon’s G1 off-white. Some fans bash this decision, but I personally don’t see it as a big deal. Maybe KFC will release a repaint later with more G1 accurate colors. If this was Hasbro, I know they will.

Looking at the jet directly from the front. From this angle you almost don’t see the wings. Kingzilla is a long jet with wings way in the back. Kinda reminds of the Cobra Night Raven S3P from G.I.Joe Real American Heroes.

Looking at the back of the jet. From this angle, you can easily see the wings, rear vertical stabilizers, and main thrusters. I should have took a pic where the flame effects are used on the thrusters. Notice the rifles are attached under the wings.

Underside of the jet. It’s pretty clean. The bulk of the body is nicely incorporated into the jet as part of the overall transformation scheme. This is partly due to the original G1 design.
It was obvious that the G1 toy designers prioritized the jet mode first, and Kingzilla adheres to that same overall G1 scheme almost to a fault. The landing gears are deployed in the above pic. The two rear landing gears on the legs can be a bit tough to deploy and retract.

A cool gimmick of Kingzilla (and Kingorilla too) is controls that light up inside the cockpit. The pic above shows it lighted. I love this gimmick.

Here is a shot of Komodus sitting inside the cockpit of Kingzilla in jet mode. Notice the controls are lighted too. The lights are activated by the black switch, to the right of Komodus, at the base where the cockpit opens. Opening the cockpit will automatically flip the lights on. The black switch is accessible from the outside too, without having to open the cockpit.

for size comparison, I’m reusing a pic I took when I did the DX9 Gewalt review. Here are these 2 figures together in jet mode.

Kingzilla’s jet mode is my favorite of the 3 modes. I honestly see no weaknesses with this mode. It’s nice and sleek with no bulk. All parts come together well with solid construction and no dangling parts. The jet mode balances well on the 3 landing gears. The controls light up gimmick, though unnecessary, is too cool to ignore. This jet mode gets an A+.

Dragon Mode

It’s not clear to me what Kingzilla’s beast mode is supposed to be. But since his name is Snapdragon, I’m gonna go with dragon. Whether this is a walking komodo dragon, a mythological dragon, or some kind of future space T-Rex type dragon, your guess is as good as mine. All I know is Kingzilla looks quite fearsome in this mode.

That is a great looking interpretation of Snapdragon in beast mode. It’s very G1 accurate, as far as overall look and colors. The twin cannons on the back screams G1. The purple neck attachment that Komodus connects to really nailed the G1 cartoon look. The way that the jet nosecone bends up as the dragon tail is so G1 it’s criminal. If I have one complaint about this mode, is that the dragon arms are a bit skinny. In these pics they look ok, but they look skinnier in person. Construction of these arms also feel somewhat flimsy, when considering that the rest of the figure is so robust and solid.

A shot of the dragon from the side.

Kingzilla dragon back view.

Close up of the dragon head. Komodus looks great as the head of the dragon as well. The jaw can be opened and closed, ready to bite on hapless Autobots, or anyone foolish enough to challenge Kingzilla.

Size comparison of Kingzilla in dragon mode with MP Megatron.

With Siege Snapdragon, both in dragon modes.

Kingzilla terrorizing WFC Earthrise Airwave. Why would these 2 characters ever be together in the entire TF-verse? They wouldn’t. Airwave was handy on my desk when I needed a victim for Kingzilla.

One aspect of Kingzilla I didn’t mention til now is the transformation engineering. In short, this figure is not at all difficult to transform, especially for a figure of this size. Some modern day MP style TFs go overboard with the transformation complexity. Not Kingzilla. This is a figure where any decent TransFan can quickly figure out the transformation scheme of all 3 modes without looking at the instructions. And on top of that, all 3 modes look pretty damn good. This is a testament to the design engineering achieved by KFC.

TL;DR

In summary, I highly recommend Kingzilla. He’s a big and solid figure, scaling well with other MPs, official or otherwise. He’s well built with excellent materials, much of the figure is composed of high quality plastic and die-cast. Construction of the figure is superb, with tight joints and ratchets. Design and colors of the figure screams G1. He comes with plenty of accessories. The figure has several interesting gimmicks. All 3 modes look great without a super complex transformation.

Kingzilla is a figure you need in your collection. If you can find one now, buy it.

Transform and Roll Out.

 

Categories: Pics, Toy Reviews

Transformers Purchased in January 2019

February 21st, 2021 Comments off

2019 started off with a bang. War For Cybertron: Siege is now available in full force. Last month we got a taste of it with Battlemasters, which is the modern term for Targetmasters. 2019 begins with the full-fledged figures in WFC Siege.

No 3P or 4P products this month.

  • War For Cybertron Siege Hound, amazon.com, $19.99

  • War For Cybertron Siege Sideswipe, amazon.com, $19.99

  • War For Cybertron Siege Cog, Walmart, $19.96

  • War For Cybertron Siege Megatron, amazon.com, $29.99

  • War For Cybertron Siege Optimus Prime, amazon.com, $29.99

  • War For Cybertron Siege Roadhandler and Swindler, Target, $9.99

  • Power of the Primes Wreck-Gar, Walgreens, $17.99

  • Studio Series Dropkick, Walmart, $18.84

Hound

Hound was one of my favorite characters from G1, so I am happy that 2019 kicks off with Hound as the very first figure.

The WFC Siege figure does justice to Hound. The alt mode is tough and rugged. The vehicle rolls well on a flat surface, and the whole thing comes together as a solid cohesive unit. The green paint job is nice, with painted-on decals of the Autobot symbol and the star that pays good homage to G1 Hound. The are peg holes for all the accessories.

Transformation to robot mode is nothing we haven’t seen before, but for Hound that’s not necessarily a bad thing. The only thing worth noting that’s a bit different is the leg transformation. The side panels of the vehicle unpegs, and the whole unit wraps around inwards to form the legs. We have seen this mechanism before on other figs, but it’s refreshing to see this on Hound. The hood of the car forms the chest and arms come out from underneath the sides. Overall, a very straightforward transformation.

In robot mode, WFC Hound does not disappoint. He’s iconic Hound in all the right ways. From the colors, the overall shape, and his trademark face sculpt, no TransFan will mistake this character for any other. The figure is well built with the right joint tolerances. Most fans should be happy with the level of articulation for a $20 toy.

Hound comes with 3 accessories. He still has his trademark shoulder-mounted missile launcher that is highly reminiscent of G1 (no missiles, unfortunately). He comes with a rifle that bears little resemblance to what he had in G1. And he has a circular accessory that can be pegged behind the rifle as a cartridge. In alt mode, this round accessory can be positioned to look like the spare tire he had in G1.

I recommend WFC Hound without reservations.

Sideswipe

WFC Sideswipe is the next figure acquired in 2019. Sideswipe is another one of my favorites, 2019 is starting off on the right foot.

In alt mode, WFC Sideswipe is a nice and sleek looking Cybertronian car. The paint job is superb, and the painted-on Autobot logo on the hood is sharp and spot-on. All parts of the figure come together well in alt mode with no loose or dangling bits. The gun and shoulder cannon accessories can be combined together as a super cannon and pegged on top of the car. A nice alt mode all in all.

Just like Hound, transformation of Sideswipe from alt to robot is pretty standard fare. It follows the tried-and-true Sideswipe transformation formula that we’ve known since G1 without too much deviation. A 180 degree waist rotation is required for WFC Sideswipe, but that in itself is nothing revolutionary. WFC Siege Sideswipe is a fun figure to just pick up and play.

The robot mode of this figure is pure classic Sideswipe in terms of appearance and design. The face sculpt, the car-hood chest, and the shape of the arms and legs, all scream G1 Sideswipe. Articulation is decent enough for a toy of this class. I detect no construction issues on my copy, all joints operate flawlessly.

Sideswipe comes with 2 accessories: a gun and a shoulder cannon. As mentioned already, they can be combined into a super cannon, for use in both robot and alt modes. G1 purists will probably bash these weapons as being non G1 accurate, but that falls into hardcore nitpicking.

If I was to mention one negative about both Hound and Sideswipe, it’s that their Cybertronian alt modes look too much like Earth alt modes. Hound is basically a Jeep with some Cybertronian modifications here and there, while Sideswipe’s Cybertronian sports car could pass as a Lamborghini concept. From a story perspective, I find it hard to believe that their alt modes would resemble their Earth alt modes to such a high degree. But that’s me nitpicking on the design. Rating purely on the merit of the figure, both Hound and Sideswipe are exceptional. No true G1 fan would pass on these figures. Get them.

Cog

Cog is a character with G1 origin. He was the combined robot form of Gasket and Grommet, accessory vehicles that came with G1 Fortress Maximus. Titans Return Fortress Maximus was released without the vehicles or Cog, so it’s good to see him made as part of the WFC Siege line.

A gimmick of the WFC Siege line are Weaponizer figures. This means they transform between robot and alt modes by mostly detaching and re-attaching parts of the figure. And more importantly, since the parts detach, they can be used as weapons for other WFC Siege figs. Cog is a Weaponizer. This role fits this character really well, since in G1 he was assembled from two vehicles (sort of like Duocons).

The robot and alt modes of WFC Siege Cog is solid. I’ve only seen pictures of G1 Cog, but as far as I can tell, Siege Cog pays good homage to its G1 roots. Transformation, as described already, is mostly puzzle forming. Personally I’m not a big fan of puzzle forming. But I understand the role that Weaponizers serve, and Cog does have parts forming G1 roots.

This figure truly shines when he is used as weapons and accessories to enhance other figures. Most WFC Siege figs have peg holes all over the place. As a Weaponizer, Cog can be disassembled and attached to other Siege figures in all kinds of ways. The instructions will give some official configurations as to how Cog can be used. But some TransFans have came up with some very creative ways for Cog to shore up other Siege figs to make them look extra ready for battle. Weaponizers really add a lot of replay value to the WFC Siege line. The whole thing still feels a tad too gimmicky for me, but it’s a good gimmick.

Megatron

WFC Siege Megatron is the first Voyager class figure this month. The Decepticon leader needs no introduction. In terms of design, this figure is completely based on G1 Megatron aesthetics in the 80s cartoon. The head, chest, and abdomen designs scream G1 Megatron. The arms and legs are also heavily G1 based, the designs retooled from the Earth mode appearance for a Cybertronian look. There are small bits on the shoulders that retains the G1 gun hammer protrusions. And of course the fusion cannon, the most iconic thing about Megatron, is well intact. I mean that both figuratively and literally, as the cannon cannot be detached from the figure. WFC Siege Megatron is well-proportioned. No weird G1 Megatron toy proportions here. He comes with a sword accessory, which I feel is kind of unnecessary. All in all, there’s a lot to be liked about the robot mode.

Transformation from robot to tank feels rehashed from, most notably, Generations Thrilling 30 Megatron and Combiner Wars Megatron. The arms come together over the back and squeezes the fusion cannon between them, collectively forming the turret. The legs rotate and fold to form the rear tank treads. The front tank treads that is stored on the back in robot mode folds outwards and rotates down for alt mode. And if you’re saying you have seen this movie before, I don’t blame you.

In tank mode, Megatron is distinctively Cybertronian. Other than the colors, he does not resemble his G1 Earth mode. In my opinion that’s a good thing, since all the other WFC Siege figs this month have their alt modes resemble their Earth forms a bit too much. The main turret does rotate a full 180, but the main cannon cannot be angled up or down. Tank treads are obviously non-working, and plastic wheels are present under each tread for actual movement. My biggest gripe about this mode is that the tank does not feel cohesive enough. The tabs that peg the front treads to the main body don’t seem to work that well. There is nothing pegging the front and rear tread together. The alt mode could have been much more stabilized if these few shortcomings were corrected.

Of all the WFC Siege figures acquired this month, I recommend Megatron the least. Overall he’s still fairly solid, and TF diehards will of course get a Megatron for their collection so what I say here probably won’t stop anybody from buying one. But if for some reason you had to cut one figure this month, Megatron gets my vote. Besides, in the months that follow, HasTak will repaint this numerous times. You will have many more opportunities to get one.

Optimus Prime

It’s no surprise that an Optimus Prime figure would be part of the first wave. Besides Megatron, the iconic Autobot leader is the other Voyager class figure we get in WFC Siege in the first wave. And this figure does not disappoint.

In robot mode, there’s no mistaking this character for anyone else. Prime’s iconic head and truck cab body are in full display. The colors and proportions of the figure are everything that you’ve come to expect from a G1-based Optimus Prime figure in the modern era. The included rifle unmistakably belongs to Prime. The figure also comes with an axe, and it never ceases to amaze me that Optimus only used the axe in one scene in G1 and all these toys accessories have been made for it for the past 25 years. Siege Optimus is quite poseable, with articulation points at all the places you expect.

Transformation to alt mode utilizes the standard overall scheme that’s been in place for Optimus since G1. There are some slight variations here and there, but there should be no surprises here for the seasoned TransFan. In this case it’s not a bad thing, and Optimus in any G1 reincarnation is too iconic for experimentation. The alt mode comes together nicely. Everything tabs into place where it should, with nothing dangling around. Prime rolls well on a flat surface. There are peg holes aplenty for both accessories. The axe blade and handle can both be compacted and tucked away. Much like Hound and Sideswipe, my only gripe is that his Cybertronian alt mode resembles way too closely to the cab of an Earth semi-trailer truck. I actually prefer his Cybertronian designs from the War For Cybertron video games or the War Within comics published by Dreamweave.

Hasbro has another winner with WFC Siege Optimus. Construction of the figure is solid all throughout. Everything is at the right tolerance. This figure does not take the Autobot Leader into uncharted toy territory, but it doesn’t need to. What this figure does, it does very well. Recommended.

Roadhandler and Swindler

Roadhandler and Swindler are the first Micromasters that I bought in the modern era. I have some G1 Micromasters, that I reviewed here. And just like G1, WFC Micromasters are released in packs and not individually. Roadhandler and Swindler make up the Autobot Race Car Patrol. Roadhandler is the red one, and Swindler (not to be confused with the infamous Swindle of Combaticons) is the grey one. I had to Google which is which.

In alt mode, these 2 figures ain’t too shabby. They each tab together well to form a cohesive unit. You can also easily tell what the alt modes are supposed to be. Roadhandler looks like a 80s Trans Am, while Swindler looks like a DeLorean (of Back to the Future fame). They are small, but you knew that going in.

Transformation is super obvious so I won’t even describe it. If you have played with any transforming robots at any time in your life, you know how these 2 transforms. The robot modes are mediocre at best. Because the transformation is so limited, the robot modes themselves are limited. All joints are cheap plastic ball joints, and parts love to pop off during transformation. For robots this small, I don’t know why they bother with articulation. It’s not like there’s much there to begin with. I much rather they sacrifice leg articulation for more stability. Roadhandler’s car hood ends up on his back, creating a back-heavy robot mode that doesn’t stand well.

A gimmick of these 2-pack WFC Siege Micromasters is that they will combine with each other to form a super weapon, for use with bigger WFC Siege figs (like Hound or Sideswipe). Roadhandler and Swindler will combine to form a cannon. But it’s so awful looking, like 2 half transformed cars stacked on top of one another. If you get this 2 pack, don’t even bother with this mode. I would later get Storm Cloud and Visper, and they do the weapon combination thing much, much better.

Roadhandler and Swindler retails for $10. I don’t think they are entirely worth it at this price. If you can find them for $5 or less, go for it. At more than that, you should stop and check yourself. There’s no shame in walking away from these 2.

Wreck-Gar

Last month I mentioned that Predaking was my final purchase from Power of the Primes. I was mistaken. The final purchase from that line is Wreck-Gar. I totally forgot about this purchase. It was never opened, and went straight to a box in my storage unit after purchase.

PotP Wreck-Gar is essentially a minor rework off of Protectobot Groove, from Combiner Wars. Hardcore TransFans like myself bought this store exclusive figure to complete the Protectobots and form Defensor in its proper G1 configuration. On its own, Combiner Wars Groove is ok at best.

I was travelling for work when I found Wreck-Far. I stopped into Walgreens for some essentials, and stumbled upon the figure. Wreck-Gar was probably a Walgreens exclusive, since I have not seen this figure anywhere else. I bought this figure for that reason alone. This will probably never get opened.

Dropkick

The only non WFC Siege purchase this month is Dropkick from the Bumblebee movie. Dropkick and his commander Shatter were two Decepticons sent to Earth in pursuit of Bumblebee. Shatter and Dropkick are both triple changers in the movie. To my knowledge, there exist no triple changing figures of these two characters, official or otherwise. It’s much like how they never made an Age of Extinction Drift that will transform into both a car and a helicopter, just one or the other. And in that tradition, Hasbro made figures that will only transform to one alt mode. Studio Series figure 22 is Dropkick that will transform into the chopper.

Dropkick is not half bad in chopper alt mode. The main body feels kinda skinny, but it reflects the look of this vehicle in real life. The details on the figure is more than sufficient for a figure at this price point. Painted logos of the US Air Force, the Jolly Roger, and caution signs provide some nice accents to the overall look. The main and tail rotors are both working. The canopy uses a separate clear piece. Dropkick sits well on his landing skids on a flat surface. There may be a tendency to fall back on the tail, but can be easily made to balance correctly.

Transformation of SS Dropkick is actually quite unique. The lower portion of the chopper body form the legs, while the tail boom become the arms. Cockpit folds down to form the chest, and during this process the head is revealed as well. Upper portion of the chopper body rotates 180. There’s a bit more transformation detail that I’m not describing, but that’s the high level summary. The overall transformation is not difficult by any means, but it’s not super intuitive either if you haven’t touched the figure for quite some time.

How I feel about the robot mode is a mixed bag. I can’t get over the fact that it’s such a skinny figure, a look that doesn’t quite resemble his movie appearance. The arms are weird too, being that it’s the chopper tail boom folded. The tail end doesn’t fold onto the arms completely, and are just left dangling to the sides. Articulation is not half bad, but in my opinion uses too many ball joints to achieve this result. The figure in robot mode is relatively proportionate, and balances well on a flat surface. Construction is decent. Some joints are a tad loose, but still offers enough support.

I don’t entirely recommend SS Dropkick, but I don’t hate it either. The alt mode is good and the transformation is refreshing. The robot mode is a bit too skinny and does not accurately resemble how he looks in the movie. And I know this may be unfair, but Bumblebee Dropkick has gotta be a triple changer. Having just one mode feels incomplete.

That will do it for the TFs in January of 2019. Here is the summary if you just want the Cliff Notes version.

Recommended:

  • Hound
  • Sideswipe
  • Cog
  • Optimus Prime

Not Recommended

  • Roadhandler and Swindler
  • Wreck-Gar

You Decide:

  • Megatron
  • Dropkick

Transform and Roll Out.

 

Categories: On The Hunt, Pics